Latest kernel realese and support packs

Hi,
Please let me know what is the latest Kernel Realese and Support Pack levels?
Thanks
Asim.

Hi Asim,
Please do check the below link:
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/70d8838d-cb8f-2c10-7ab8-d1504670fbb8
How to do a kenel upgrade, check present version, how to download-> all have been updated.
Lemme know if I need to add anything else as well.
Kind regards,
Hemanth

Similar Messages

Install Kernel Patch and Support Package

Hi Gurus.
How can I update the kernel patch and support package in solution manager?
What patchs i have to download In the service.sap.com ?
best Regards
luis

Hi Luis,
Yopu must already have checked this info at Inst Guides..
else...The Post installation steps in the installation guide contain the procedure for application of latest support packs procedure.
https://websmp204.sap-ag.de/instguides
The following SAP notes can also be referred : 212876
Information of how to download a kernel can be obtained from 19466.
Details of Patches and their release schedules can be obtained as always at
https://websmp104.sap-ag.de/ocs-schedules
Hopefully it Helps in your quest.
Br,
Sri

Anywhere to find newly added countries in enhancement pack and support pack

Our HR wants to proactively identify the new countries being introduced through enhancement pack and support pack, so configurations such as V_T503Z (country assignment for employee group/subgroup) can be updated accordingly.
How can I find such a list?
Thanks.
Joan

Hi Qiong
If you have ever tried downloading the notes delivered under CLC or HRSP for SAP-HR Component, you would see that the sub-component names are generally based on country abbreviations example PY-AU, PY-SG etc. Also the country names are mentioned there. So if any new country comes up you would know it from the sub-component name. However, whether you need to configure anything in your system for these new countries depends on the fact whether your client has operations in that country or not and whether your project is supporting that country operations for the client or not.
It is more likely that we keep checking the CLC and HRSP for any new functionalities introduced by SAP for the countries that we are supporting for the client instead of checking for new countries altogether.

Difference between service pack and support pack

Hi,
what is the exact difference between service pack and support pack. Are they same?
The version details presnt in integration builder -> help-> inforamtion of my XI server are as follows :
Service pack: 09
Release: 645_VAL_REL
does it mean that the both support package and service package for my XI server are 09?
thanks in adavance
regards
Jagruthi

1. A service pack (in short SP) is a collection of updates, fixes and/or enhancements to a software program delivered in the form of a single installable package. Service packs are usually numbered, and thus shortly referred to as SP1, SP2, etc. It is notable that they may bring, besides bug fixes, entirely new features.
http://help.sap.com/saphelp_nw04/helpdata/en/57/a21f407b402402e10000000a1550b0/frameset.htm
Service packs in 2004 and 2004s;
in 2004 - in 2004s
SP12 & < - SP04 http://XI 3.0
SP13 + 14 - SP05 http://PI 7.0
SP15 - SP06
SP16 - SP07
SP17 - SP08
SP18 - SP09 and so on...
2) Support pack -
http://help.sap.com/saphelp_nw04s/helpdata/en/9e/5bc53f3e0f0228e10000000a114084/frameset.htm
For the ABAP parts of usage type PI, this is the implementation of support packages. For the Java parts, the deployment with the Java Support Package Manager (JSPM) is used.
You can find currently available support packages on SAP Service Marketplace at service.sap.com/sp-stacks.
A description of how to apply support packages is available in SAP Note 879289.

Difference between Hot Pack and Support Pack

Hello,
Can anyone throw some light on difference between Hot Pack and Support Pack(if there is any) and what is Tax Update Bulletins, do we need to configure for TUBs or what is the SAP HR consultants role is Tubs.
Thanks
Charlene

Hi,
I believe both (hot pack and support pack) are one and the same.
For TUBS, you can find more information in:
Service Marketplace -> SAP ERP Human Capital Management -> Country Info -> North America -> United States -> Tax Update Bulletins -> Tax Factory 8 -> Tub Downloads
Hope this helps,
Reward points if helpful,
Thank You,

Inits/Deltas during Uprgrades and support packs

How are people handling the deltas and initializations when upgrades and support packs are applied to the source system. We had to delete our delta queues and reload everything!!! I know that's not right. ( At least I hope that's not right!!!). Please advise...

Ye s- you should not have to reload targets a a result of an SP/Upgrade.
When there are changes to the PI_BASIS plugin (extraction from ERP), you need to clear your V3 and Delta queues.
When SAP Service API (internal and BI Data mart extraction) is changed, you need to clear the BW delta queues. This can require two complete extraction and laod processes.
As a matter of practice, we always clear all queues prior to an SP/upgrade.
See the How to... Checklist: Rapid SAP Netweaver 7.0 BI Technical Upgrade document which is where you can fins this info page 11or 12.

Difference Between Patches And Support Packs

Hi Experts,
I have one doubt,
1.... I want to Know Difference Between the Patches And the Support Packs
2...What is the Use of these Two??????????Is it Necessary to Apply these Two??
I asked This Question in Number of Queries...................
Please Let me Know All the Above Mentioned Queries
Regards
Khanna

Thank you for ur Quick Reply Satish.
And one more thing i want to clarify with you ...
Here i am going to Install XI 3.0 with WAS 6.20.
1......I installed j2sdk1.4.2_12
2......Installed Oracle 9i
Question1:- Do i need to Patch it to Oracle 9.2.0.7.0?????????
Or I can do it Later Also???????(At Present I dont Have it)
I Installed Up to Here.
3.....After this I wil Install WAS 6.20 with ABAP + JAVA Stack
( I have Doc for this).......
4....After this I wil Install XI 3.0
I think this is the XI Installtion.....
Question2:- Is this way of Installation is Correct?????
Question3:-After Completion of All these We should do the XI Post Installtion...Right?????
Question4:- When can we Apply the Support Packs And Patches??????? In the Post Installation Or After the Post Installation?????
Please Give me the Right Direction To Install the XI Successfully.......
Helpful ANS Wil be REWARD Points
Regards
Khanna

Basic Configuration and Support Pack Stacks

Hi everyone,
Just a general question about the Solution Manager 7 "basic configuration" stuff.
Are you required to perform the "Basic Configuration" everytime after you apply a new support pack stack to solution manager?
Or is it a one off, after the initial installation?
Cheers
Shaun

Hello,
https://websmp109.sap-ag.de/~sapidb/011000358700001927282008E has some information about your question.
Only some parts of SOLMAN_SETUP must be run everytime, other parts are optional. For an overview please visit the link.
Best regards,
Miguel Ariñ

Apply DMA to Compact Flash devices in latest kernel (DMA is supported)

DMA does not apply to Compact Flash devices even though they are UDMA compatible probably due to Kernel changes in Linux-3.2.0-1 or earlier.
Is there a way to enable DMA for these devices? They used to be enabled always.
Last edited by lilsirecho (2012-04-20 14:53:06)

Hi, Dusty. All digital cameras that I know of write their memory cards in FAT32 format. Macs, which have always been able to read FAT32, have no trouble reading them, with the exception of the XD cards that many Olympus cameras use. Those are often not readable by Macs for some reason, but it isn't because they're FAT32-formatted. The E-410 can use both CF and XD cards, but you should use only CF cards in yours to avoid problems.

No GLX on latest kernel, X, and catalyst

local/catalyst 11.7-1
local/catalyst-utils 11.6-1
local/lib32-catalyst-utils 11.6-1 (lib32)
local/xorg-server 1.10.3.901-1 (xorg)
local/linux 3.0.1-1 (base)
01:00.0 VGA compatible controller: ATI Technologies Inc RV770 [Radeon HD 4870]
[max@gayforcetwo Steam]$ glxinfo
name of display: :0.0
X Error of failed request: BadRequest (invalid request code or no such operation)
Major opcode of failed request: 136 (GLX)
Minor opcode of failed request: 19 (X_GLXQueryServerString)
Serial number of failed request: 18
Current serial number in output stream: 18
[max@gayforcetwo Steam]$ fglrxinfo
X Error of failed request: BadRequest (invalid request code or no such operation)
Major opcode of failed request: 136 (GLX)
Minor opcode of failed request: 19 (X_GLXQueryServerString)
Serial number of failed request: 18
Current serial number in output stream: 18
Section "ServerLayout"
Identifier "aticonfig Layout"
Screen 0 "aticonfig-Screen[0]-0" 0 0
EndSection
Section "Module"
EndSection
Section "Monitor"
Identifier "aticonfig-Monitor[0]-0"
Option "VendorName" "ATI Proprietary Driver"
Option "ModelName" "Generic Autodetecting Monitor"
Option "DPMS" "true"
EndSection
Section "Device"
Identifier "aticonfig-Device[0]-0"
Driver "fglrx"
BusID "PCI:1:0:0"
EndSection
Section "Screen"
Identifier "aticonfig-Screen[0]-0"
Device "aticonfig-Device[0]-0"
Monitor "aticonfig-Monitor[0]-0"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
What's going on?
Last edited by synthead (2011-08-11 17:53:31)

I don't know how you updated, but I use the catalyst repository, and in the last big update, there was an issue in the order of installing linux 3 and catalyst 11.7 (?), such that the fglrx hook failed. I had to redo building the image, whereupon the hook worked. Did you check for messages as it rebuilt the image?
Sorry if this was obvious, but I am not arch-guts/catalyst savvy.
HTH

Automatic Transport Requests and Support Pack Stacks using CHaRM

Hi Experts,
Could you please give your valueable inputs on below Requriements :
1. All Transports Requests needs to be Automatically moved from Solution Manager using CHaRM.
2. Automatic Support Package Stacks needs to be updated using Solman - CHaRM
would be helpful if any one could send the documentation on above requirements.
Regards,
Vijaysateesh

Hi,
>
> 1. All Transports Requests needs to be Automatically moved from Solution Manager using CHaRM.
Yes. You can schedule a periodic job (say for example daily 6M) to import all released transport requests from QAS to PRD of a maintenance cycle/project. This is the task "Import Transport Request(Backround)" given in task list (tcode-SCMA) of a maintenance cycle.
>
> 2. Automatic Support Package Stacks needs to be updated using Solman - CHaRM
I haven't done this. But this is the task "Import Support Package" given in task list (tcode-SCMA) of a maintenance cycle.
I hope there is no specific documents for these. It's the same documents related to ChaRM.
Regards
Sanjai

Trial versions: How to install notes and/or support packs

Is it possible to install notes and support packs in a trial system?
Can a connection with SAPOSS be made?

The software you downloaded is for Mac OS X; to get the Mac OS 9 version of the software, download the file for your language from the following pages (iPod, iTunes). The Mac OS 9 iPod software only works for first and second generation iPods, and requires 9.21 to run. Mac OS 9's iTunes will only sync first and second generation iPods, as well as third generation iPods which are running version 2.0x of the firmware.
(10502)

Support Pack error in SPAM

Hi
I am importing a group of Support Packs into our DEV environment to bring the landscape uptodate, we are running NW04 on Windows 2003 64 bit & SQL Server 2000, I've updated to the latest SPAM and Kernel before the Support Packs.
When importing in SPAM I have used the calculate queue method, all looks ok, when I perform the import, in the phase TEST IMPORT i get the following error for Support Pack SP 12 for EA-FINSERV 5.00 :

Function MAP2I_BAPICMS_STR_MOV_INS_CRT (CMS_BUSISB104_MAPPI does not fit into the existing function group ((CMS_BUSISB10)
The only option I am given is to repeat the phase, I've repeated this a few times and get the same error on TEST IMPORT. I'm new to NW04 640 BASIS, but I know from running 4.6X system that you can re-run phases and quite often they work correctly 2nd time round, is it worth changing SPAM to not stop on test import errors ? as I know objects required can be in earlier support packs (i'm applying supports pack EA-FINSERV 5.00 08 to 11 as part of the queue before 12 which is giving me the error.
I've checked on OSS and cannot find any notes on this error/support pack.
Thanks.

nope, not tried with ignore test errors yet, wanted to check opinions here to see if thats the next step to try, or if there's anything else I could try ?

Service Pack Vs Support Pack

Hi All,
Is there a difference between Service Pack and Support Pack ?
Thanks,
Prashanth

Hi,
I think. This are synonyms.
Microsoft takes the name ServicePack.
In SAP there are same objects to changes the system:
note: to correct one program. to correct one mistake.
support package: change a list programs.
support package stack: group of patches for all software components. SAP tests this combination of corrections intensive.
Sven

Does support pack write over snotes?

Hi,
If I have put in SAP notes via transaction snote and the SAP installs a support pack which may contain or may not contain the SAP note.
Does the support pack write over the snote?
Or does it migrate the support pack with the snote?
Or does the snote like changing code with modification assistant show in transaction SPAU?
regards
Baran

SPAM -> Support pack transaction do the same job has SNOTE.
And Support pack is a collection of Notes.
So when SPAM go to the program and see the note is already applied .. SPAM don't do anything (if program is correct and not modified).
Rgd
Fré

Latest kernel realese and support packs

Similar Messages

Maybe you are looking for