Latest Lync Client with latest update in one setup file

Hello,
We are building application using Lync SDK and we want to ship the Lync Client in our setup:
so we added the lync 2013 client found here to
our setup and its size 290 mb
after we faced some problems we ended up to install the update found here  and
its size 86 mb
this makes the setup size bigger so our question is:
Where we  can find the latest Lync 2013 client with latest update files included instead of adding
a new update files to the setup?

Lync 2013 client setup is part of the Office setup program on the installation media.
Lync 2013 Basic is a downloadable client for customers who have a licensed, on-premises Lync Server 2013 deployment and customers who subscribe to a Microsoft Office 365 plan that does not include
the full Lync 2013 client.
Lisa Zheng
TechNet Community Support

Similar Messages

  • Download the latest updates to the setup program

    When installing scom you can set the following checkbox: "Download the latest updates to the setup program".
    What does this selection actually do? Is it only downloading updates to the setup program, or is it downloading updates for the scom installation itself as well?

    Hi,
    Only downloading updates to the setup program
    Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

  • VVX handset initiated call will not connect to Lync client with simultaneous ring enabled

    Has anyone encountered a similar issue? And any advice on how to fix it please? (note - a case has been logged with Polycom, but weeks are passing by and they have not provided any useful response so far; hence reaching out in
    the community for help) .... thanks in anticipation.
    Here's the scenario:
    A Lync 2010 user in the office (I'll call her Lisa) has setup her Sim Ring to an external number (her mobile number).
    Another Lync 2010 user in the office (Mike) calls Lisa's extension from his VVX410.
    Lisa answers the incoming call using her Lync client with a USB headset.
    The call appears to connect according to Mike and his VVX screen starts the call timer.
    Lisa's Lync client just says "Connecting Call ..."  but never actually connects.
    The line is silent for both Mike and Lisa.  There is no audio in either direction.
    Further testing reveals the following:
    The same problem occurs if Lisa uses a VVX handset to answer and also happens if she uses a CX600 handset to answer.  Hence the problem seems to relate specifically to the fact that Lisa has setup Sim Ring to an external number; rather than relating
    to the answering device type.
    If Lisa changes her Sim Ring so that it calls another internal extension, then the problem does not exist, i.e. calls connect fine.  Hence it seems to be specific to sim ring to an external number.
    The environment is Lync Server 2010 CU6, Lync client 2010 on Win 7 (although the same problem exists when tested with a Lync 2013 on Win 8.1 client); and with AudioCodes Mediant 2000 and 1000 gateways.  

    Please specify another external number for Simultaneously Ring.
    You phone may not have permission to dial an external phone number.
    Please check if you can call the external phone number directly.
    Lisa Zheng
    TechNet Community Support

  • Uploading photo from Lync client with Exchange 2010

    We are using Lync 2013 standard edition with Exchange 2010 in our environment.
    In the client, if we go to Tools -> Options -> My Picture, the option to "Edit or Remove Picture" is greyed out.
    I understand this is only available if we're on Exchange 2013, but someone somewhere must have figured out a workaround for this? Anyone know a reg-hack or 3rd party tool that would enable this feature?
    I realize there is a method to turn back on the "Show a picture from a website" via powershell. I have already done this in our environment. However it is quite unrealistic to expect general populace to know how to resize a picture to less than
    30kb (?!) and upload it "somewhere" on the web. Understandably this would be a nightmare for Help Desk having to help people resize their photos and find somewhere to upload it to.
    Any help/ideas would be appreciated!

    You could centrally upload profile photos for your users into the AD's thumbnailPhoto attribute using...
    powershell:
    http://blogs.technet.com/upload-picture
    3rd party software: 
    http://www.codetwo.com/freeware/active-directory-photos/
    http://www.cjwdev.co.uk/Software/ADPhotoEdit/Info.html
    Lync client side upload into Exchange 2010 will not be possible as Exchange 2013 introduced HD photo and storing photos in the mailbox. Take a look at: http://technet.microsoft.com/en-us/library/jj688150.aspx
    Please mark posts as answers/helpful if it answers your question.
    Blog
    Lync Validator - Used to assist in the validation and documentation of Lync Server 2013.

  • I have a macbook pro with the latest update, and any Pdf file I have opened online or downloaded and I try to print it gives me this message Adobe Reader could not open 'April-15th-2014-Messenger.pdf' because it is either not a supported file type or beca

    Adobe Reader could not open 'April-15th-2014-Messenger.pdf' because it is either not a supported file type or because the file has been damaged (for example, it was sent as an email attachment and wasn't correctly decoded).

    Most likely http://helpx.adobe.com/acrobat/kb/pdf-error-1015-11001-update.html

  • Lync client can't fetch the address book files

    Hi,
    We have 3 FE Lync 2010 servers. All the clients are giving an error "cannot synchronize with the corporate address book".
    I can access Internal Web services URL and download the AB file.  I have also made an entry for Lync Internal web services in the host file and signed into the Lync. Then the client was able
    to download the Address book files successfully. Any ideas to resolve this.?
    Thank you !

    Force a contact list update to make sure that your information is synchronized. To this, follow these steps:
    Locate one of the following folders, depending on your operating system:
    For Lync 2013:
    Windows 7 and Windows 8: %localappdata%\Microsoft\Office\15.0\Lync\sip_<sign-in name>
    For Lync 2010:
    Windows 8, Windows 7, or Windows Vista: %localappdata%\Microsoft\Communicator\sip_<sign-in name>
    Windows XP: %userprofile%\Local Settings\Application Data \Microsoft\Communicator\sip_<sign-in name>
    Delete the following files:
    Galcontacts.db
    galcontacts.db.idx
    CoreContact.cache
    ABS_<sign-in name>.cache
    Mfugroup.cache
    PersonalLISDB.cache
    PresencePhoto.cache
    Restart Lync, and then wait for 30 minutes for resynchronization to finish
    Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question, please click "Mark As Answer"
    Mai Ali | My blog: Technical | Twitter:
    Mai Ali

  • Is it possible to update only one java file in my application bundles without re-deployment?

    For Example,
    i have a Application.java file in my application-bundles.jar and it is running.
    I need to add a new method in Application.java file alone while the instance is running.
    I know we can change .jsp file through CRX-DE lite, but looking for .java files.
    is it possible or can some one suggest an idea on this?

    Hi kalimisetty,
    It is part of bundles. It needs recompilation & deployment. Though server restart is not required.
    Thanks,
    Sham

  • Need help with multiple links in one Flash file

    Hi, I have to do a banner which is basically 4 different
    slides that fade up and down, but the client wants each slide to
    link to a different place when the user clicks on it. I know how to
    create an invisible button to link the whole ad, but how would I
    link each slide? Thanks in advance!

    Am I getting no replies because this can't be done in Flash?
    Is there a better way to do it? Actionscripts perhaps?
    BTW, I'll have no access to the html page that the client
    will be putting the swf file on so I wouldn't be able to put any
    code around the file for linking, like if I did a bunch of jpg's
    and found a script on the web somewhere that would fade them up and
    down and link them. They want the linking built right into the swf,
    is this even possible? Thanks in advance!

  • Can I delete the Adobe folder on my desktop with all the previous version setup files?

    Thanks,
    Bill

    The Dropbox app is free, although there are in-app purchases that get you extra storage.  I believe all you need to do is re-install the Dropbox app, and then sign into your Dropbox account.

  • Cannot download the latest update for itunes

    When I go to help update I cannot download the latest version of itunes. Will I have to download from the Apple site?

    Okay, so I called this number (1-800-692-7753) and asked to speak to someone (to avoid using the animated voice system). The guy asked to share my screen so he could better help me. We ended up unistalling every single thing dealing with iTunes/Apple on my PC (following these instructions: http://support.apple.com/kb/HT1923).
    Once everything was unistalled, we went to the Apple iTunes website (http://www.apple.com/itunes/) to install iTunes again.
    This time it worked! And all my music was just how I left it.
    Apparently there was a problem with the update through iTunes, a file was missing or corrupted or something, so this is the only way to get around that mess.
    I hope this helps everyone!
    -Tabitha

  • Cannot download & insall latest update, Firefox 5

    when trying to download and install latest update, I keep getting a message that the file cannot install because it doesn't have a verified signature or authorization.
    Roger

    Okay, so I called this number (1-800-692-7753) and asked to speak to someone (to avoid using the animated voice system). The guy asked to share my screen so he could better help me. We ended up unistalling every single thing dealing with iTunes/Apple on my PC (following these instructions: http://support.apple.com/kb/HT1923).
    Once everything was unistalled, we went to the Apple iTunes website (http://www.apple.com/itunes/) to install iTunes again.
    This time it worked! And all my music was just how I left it.
    Apparently there was a problem with the update through iTunes, a file was missing or corrupted or something, so this is the only way to get around that mess.
    I hope this helps everyone!
    -Tabitha

  • How to connect Lync 2013 client with OCS 2007 R2 Edge server

    Hi,
    We have OCS 2007 R2 Edge server for external & OCS 2007 R2 FE Server for internal access in our environment.
    We able to access internally Lync2013 clients with OCS 2007R2 server, however from external we cannot access Lync2013 client with OCS2007 R2 server.
    Is there any patch or registry key trick to access OCS from lync2013 client externally? We cannot immediately migrate to Lync2013 server from OCS.
    Any help
    MD

    Hi,
    I suggest you still use OCS 2007 R2 client to login OCS 2007 R2 Server untill finishing migration to Lync Server 2013, as using Lync client with OCS 2007 R2 Server will offer a pretty limited experience.
    Here is a great blog about Lync 2010 Client unsupported with OCS, it is for Lync 2010 client but similar for Lync 2013 client:
    http://blog.schertz.name/2010/09/lync-client-unsupported-ocs/
    Note: Microsoft is providing this information as a convenience to you. The sites are not controlled by Microsoft. Microsoft cannot make any representations regarding the quality, safety, or suitability of any software or information found there.
    Please make sure that you completely understand the risk before retrieving any suggestions from the above link.
    Best Regards,
    Eason Huang
    Eason Huang
    TechNet Community Support

  • Deployment for 250 Clients with a poor communicationlink

    Hello guys :
    We're currently working with Forte 3.0.J.1.
    We have two questions :
    1.- We have a big application and when we deploy it the client
    partition is quite large.
    The size of the standard partition image repositories (*.btd,
    *.btx) is 7436 Kb.
    We then need to distribute the client files over a LAN (5% of the
    users) and over a
    WAN (96% of the users). Most of the users have a poor communication
    link ( 9600 bps !!!! ).
    We have two schemes for the distribution :
    a).- Configuration of the client machine ( forte control panel with
    flag :
    cfg:em:2:2:2. In this case, the client partition must be
    manually copied.
    This takes 50 minutes to copy via ftp. This flag requires
    the file being executed
    using ftexec -fi parameter.
    b).- Normal Forte mechanism, the client partition is being
    copied automatically once
    forte detects a difference with the current file. This
    takes 56 minutes via
    the Forte environment.
    Is there somebody having the same scenario ( low speed
    communications links ), if so
    can you share your experience with us?. Apart from that, we are
    having quite good
    response time inside the application.
    2.- What is the minimal configuration in memory (RAM) for a Central
    Server Node ( only Forte
    environment ). The machine is an Alpha 4100 with 1GB of RAM running
    Alpha Unix 4.0.D, the database is
    Sybase Adaptive Server 11.9.3 with 250 to 300 concurrent fort&eacute;
    users.
    Regards
    JAEB.
    Do You Yahoo!?
    Free instant messaging and more at http://messenger.yahoo.com
    To unsubscribe, email '[email protected]' with
    'unsubscribe forte-users' as the body of the message.
    Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>

    Hi,
    We've similar situation here but a little bit better. What we did was:
    1. We gzipped all the client btrees under appdist after deployment but
    before download.
    2. We wrote our own "Launcher" which would do one extra step - unzip
    the client btree before launching the client with normal launchservice.
    One drawback of this approach is that you will need
    1. hard-coding on unzipping the btree ( like hard-code for behaviour
    under Windows, Mac or UNIX )
    2. carefully designed application name. Note that Forte save the files
    in only 8 characters. Any name longer than that will be truncated with
    sequence number for the 8th character.
    One more thing that we've observed over WAN. When the traffic is really
    high and when we have a deployment, the nodemgr will crash claiming that it
    is out of memory. However, when we check the trace, the memory allocated by
    -fm is far more than enough. Thus, I suspected that when the download is
    slow, the nodemgr is flood with threads trying to download the applet to the
    client. And it is the thread manager that got boomed when there is really a
    lot of users. So beware.
    Regards,
    Peter Sham.
    -----Original Message-----
    From: Jorge Espinoza [SMTP:[email protected]]
    Sent: Wednesday, May 12, 1999 1:18 PM
    To: [email protected]
    Subject: Deployment for 250 Clients with a poor communication
    link
    Hello guys :
    We're currently working with Forte 3.0.J.1.
    We have two questions :
    1.- We have a big application and when we deploy it the client
    partition is quite large.
    The size of the standard partition image repositories (*.btd,
    *.btx) is 7436 Kb.
    We then need to distribute the client files over a LAN (5% of
    the
    users) and over a
    WAN (96% of the users). Most of the users have a poor
    communication
    link ( 9600 bps !!!! ).
    We have two schemes for the distribution :
    a).- Configuration of the client machine ( forte control
    panel with
    flag :
    cfg:em:2:2:2. In this case, the client partition must
    be
    manually copied.
    This takes 50 minutes to copy via ftp. This flag
    requires
    the file being executed
    using ftexec -fi parameter.
    b).- Normal Forte mechanism, the client partition is being
    copied automatically once
    forte detects a difference with the current file. This
    takes 56 minutes via
    the Forte environment.
    Is there somebody having the same scenario ( low speed
    communications links ), if so
    can you share your experience with us?. Apart from that, we are
    having quite good
    response time inside the application.
    2.- What is the minimal configuration in memory (RAM) for a Central
    Server Node ( only Forte
    environment ). The machine is an Alpha 4100 with 1GB of RAM
    running
    Alpha Unix 4.0.D, the database is
    Sybase Adaptive Server 11.9.3 with 250 to 300 concurrent fort&eacute;
    users.
    Regards
    JAEB.
    Do You Yahoo!?
    Free instant messaging and more at http://messenger.yahoo.com
    To unsubscribe, email '[email protected]' with
    'unsubscribe forte-users' as the body of the message.
    Searchable thread archive
    <URL:http://pinehurst.sageit.com/listarchive/>
    To unsubscribe, email '[email protected]' with
    'unsubscribe forte-users' as the body of the message.
    Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>

  • Ever since the latest update, my task bar (if it's called that - it's the one with "file,edit,view, etc") will "grey out" and I won't be able to type into any websites I visit. Only way to fix:either restart Firefox or reduce the window and open it again.

    Ever since the latest update, my task bar (if it's called that - it's the one with "file,edit,view, etc") will "grey out" and I won't be able to type into any websites I visit. Only way I can proceed is if either restart Firefox (very annoying) or reduce the window and open it again. Please help!

    Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
    *Don't make any changes on the Safe mode start window.
    *https://support.mozilla.org/kb/Safe+Mode
    See also:
    *https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
    *http://kb.mozillazine.org/Corrupt_localstore.rdf

  • I have my daughters Ipod, my iphone, my wife's Iphone and Ipad on the one Apple ID.  Since the latest update we are receiving Imessages from our daughter's Ipod with my wife's caller ID on the one message strand.  Can I fix this problem?

    I have my daughters Ipod, my iphone, my wife's Iphone and Ipad on the one Apple ID.  Since the latest update we are receiving Imessages from our daughter's Ipod with my wife's caller ID on the one message strand. 
    Is it possible to differentiate between all the devices?Can I fix this problem?

    I recommend that you
    Create a NEW account/ID for her using these instructions. Make sure you follow the instructions. Many do not and if you do not you will not get the None option. You must use an email address that you have not used with Apple before.
      Creating an iTunes Store, App Store, iBookstore, and Mac App Store account without a credit card
    Use the new ID on her iPod but only for:
    Settings>Messages>Send and Receive
    Settings>FaceTime
    and Settings>iCloud if you want her to have separate Contacts Calendar and some other things.
    Continue to use the same/common Apple ID for Settings>iTunes and App stores so you can share purchases.

Maybe you are looking for