Latest Mavericks 10.9.2 update does not complete

Computer restarted, displaying "Installing Software Updates" progress indicator frozen. What to do?

force quit if you have to and try again.
hold the power button for an extend period if you can not shut down.

Similar Messages

IOS update does not complete

I recently had an issue where only the header on my two different email accounts would display. I figured I would sync my phone ande check for updates to see if a patch would fix it. It seems the IOS 5.0.1 was able to download, but my iTunes could not complete the push to my phone. It stayed around the 25% complete indicator all night. iTunes will not let me eject my iPhone due to currently running the update.
I have the Iphone 4 and loaded IOS 5.0 appx two weeks ago.
Is my only option to factory reset?

There have been other questions about the update haning up and the recommendation is that if you are stuck at the Apple scrreen for more than ten minutes, force the unit to restore.
See these knowledge base articles:
http://support.apple.com/kb/HT1808
http://support.apple.com/kb/TS3281
http://support.apple.com/kb/DL1472

Firefox update does not complete but has removed old firefox

If I end my firefox session and restart - I get an auto update message and it starts automatically - after several minutes I try to start firefox and the target has been deleted - firefox is gone - I downloaded the latest version from mozilla and it works until the next startup. I am running WIN7 and FIREFOX 29
I have reproduced this twice so far so whatever is going wrong is consistent

HI pladfirefox
Please see: [[Firefox just updated - why is it asking me to update again?]]

Updated my Mac 2008 to Yosemite and Update Does Not Complete

I've recently updated my Mac's software to Yosemite, and it has been uploading for over 12 hours and the bar is still half way full!!!
please help

Follow the advice offered in this discussion
Have fun
Leo

Update does not complete

G'day,
Been trying to update my Z3 through pc companion for days now. The new lollipop update. Everytime it gets stuck at 'preparing'. Any help would be highly appreciated.

The problem is most likely 64bit which doesn't seem to like the Flashmode driver - Try running PCC in compatibility mode and choose another system or try and use a 32bit system - I'd recommend Windows 7 32bit
For a successful technology, reality must take precedence over public relations, for Nature cannot be fooled. Richard P. Feynman

Can't upgrade my MAC os from 10.7.5 to the latest available . Usual way of software update does not help. Keeps saying you have the latest update .

I can't upgrade my MAC os from 10.7.5 to the latest available .
Usual way of software update does not help.
Keeps saying you have the latest update .

To get beyond 10.7.5, you must go to the App Store and purchase an upgrade.
Currently Mavericks is free
Allan

After installing the latest itunes/quicktime update, I can no longer access the itunes store and my iphone does not complete syncing. What can I do to fix this?

After installing the latest itunes/quicktime update I can no longer acces the itunes store nad my iphone does not complete syncing. What can I do to fix this? I have tried uninstalling and reinstalling itunes. I have uninstalled and reinstalled windows updates. I have checked the firewall settings. what else?

The problem is with version 10.4.1. I had to reload 10.3 to get it to work. The recommendation from a previous poster worked for me. Here was their list of steps:
Go to Control Panel>Programs>Uninstall
2. Uninstall the following Apple programs in the following order:
     a. iTunes
     b. QuickTime
     c. Apple Software Update
     d. Apple Mobile Devices Support
     e. Bonjour
     f. Apple Appllcation Support
3. Reboot PC
4. Find, Download and Install iTunes 10.3 (you can find it at FileHippo.com)
If you start iTunes now you will get an error message saying that the current iTunes library was created by a newer version of iTunes. To correct this:
5. Go to your Music>iTunes folder and delete the "iTunes Library.itl" database file
6. Within this iTunes folder find and open the "Previous iTunes Libraries" folder and locate the most recently dated "iTunes Library (date).itl" database file.
7. Copy and Paste this file back into the iTunes folder
8. Rename this "iTunes Library (date).itl" file by removing the date. It should say "iTunes Library.itl"
9. Reboot PC

Adobe reader will not open pdf files I have saved as, or, export as pdf to my desktop (latest Maverick). The same file does open when I am on the source website (i.e. user manuals etc.). Why?

Adobe reader will not open pdf files I have saved as, or, export as pdf to my desktop (latest Maverick). The same file does open when I am on the source website (i.e. user manuals etc.). Why?

iMac G4, Mac OS X (10.4.9)
Make sure you have the latest Adobe Reader installed for your OS.
http://www.adobe.com/support/downloads/product.jsp?platform=macintosh&product=10
Did you try using Preview. If you control click on the PDF on your desktop you can use the "open with" option.

I am updating my Imac to Mavericks but email updated does not progress

I am updating my IMac to Mavericks but email update does not progress.

You can't go back. There is an iPhone YouTube in the App Store. You can also use the mobile site.
http://m.youtube.com/

HT1222 Please Help.. When I update to 7.0.6 I remark a very low battery lifetime I does not complete 2 hours.. I update to 7.1 to get rid of this problem but unforeately the problem still.. Could you please guide what to do?

Please Help.. When I update to 7.0.6 I remark a very low battery lifetime I does not complete 2 hours.. I update to 7.1 to get rid of this problem but unforeately the problem still.. Could you please guide what to do?

Restore as New (no backup)... then Re-Sync your Content.
Make sure you have the Latest Version of iTunes (v11.1.5) Installed on your computer
iTunes free download from www.itunes.com/download

HT4589 Automatic Update does not give me an update from FCP X 10.0 to FCP X 10.0.5. How do I update? I have version 10.0.0.

I have never received an update from my original FCP X 10.0. I recently upgrade to Mountain Lion, purchase additional plugins and FCP X cannot use them unless I upgrade to atleast FCP X 10.0.3. Automatic Update does not give me an update for FCP X. Version 10.0.5 does not show on the Apple Support Download page. I purchased Compressor at the same time and it has given an update. How do I down find the download? Any suggestion would be appreciated.

And if it does not come automatically, move your Final Cut.app out of the Applications folder, open App Store, click Purchaces, and Install it from there - it will download the latest 10.0.5 version.
If FICPX is not listed there, it's because you bought it with another AppleID!

After installing Mavericks iTunes 11.1.3 does not find my recent iTunes Library. Where did my current library go?

After installing Mavericks iTunes 11.1.3 does not find my recent iTunes Library. Where did my current library go? The new iTunes opens a 2009 library on start up. My most recent library is ignored even when I go to it directly and start iTunes with it. In another thread someone suggested repairing permissions, I did that and it did not help. I ripped my entire CD collection over the summer (1000's of songs) and now they just don't exist...or I can't find them. They were there before I upgraded to Mavericks the other day. Now vanished. I have found no other issues with Mavericks (yet). Played the music last week; upgraded, now can't find my complete current library. If anyone has a clue as to what might be causing this I sure would like know. Thanks to anyone who can help.

Hi, sorry to hear you had this problem. Sometimes after updating iTunes the library appears blank because a new library (.itl) file has been created. Anyone else experiencing this issue may be able to resolve by following the steps outlined in TS1967. There is ofter a 'Previous iTunes Libraries' folder in the iTunes folder, by quitting iTunes entirely and replacing the currently named iTunes Library.itl file with the library file named by date in the Previous Libraries folder (should look something like 'iTunes Library 2011-08-03') and renaming to 'iTunes library.itl' and relaunching you should find the library looks the same as it did before updating (metadata intact).

Windows update does not work after using System recovery disk

I have a Toshiba Satellite c655 with WIndows 7 64 bit Home premium. The hard drive died on it, so I purchased a new hard drive and purchased the appropriate Recovery media from Toshiba. I followed the directions and installed the 3 disks on to the new hard drive. But Windows update does not work I get the following error: Windows update can not currently check for updates, because the service is not running. You may need to restart your PC    No matter what I try, I can not get it to work. And it will not let me install Windows Defender either. Any ideas or help would be appreciated. Thank you in advance for your time on this matter.
Solved!
Go to Solution.

I get errors saying A problem is preventing the troubleshooter from starting.
That makes two similarities to the following thread. Both Windows Update and Troubleshooters fail to work correctly.
   Trouble with reinstall of Win7 64 on a L505-ES5018
The fix was to install a new hard disk driver.
   Intel Rapid Storage Technology
-Jerry

HT4623 When i click on general settings, the software update does not seem to come up? It wont let me download any apps.

When i click on general settings, the software update does not seem to come up? It wont let me download any apps.
I Want to download i0s 5
i have ipod touch 3rd gen

You need to connect your iPod to iTunes on a computer and update from there.
Before updating, I recommend that you create a backup first, using : http://support.apple.com/kb/ht1766
Please note that iPod 3d generation only goes up to iOS 5.1.1
To update the iPod, use: http://support.apple.com/kb/ht4623
scroll down to the part that's about updating with iTunes.
Good luck
Stijn
Message was edited by: jesterwylde

"The updater does not have a firmware image"

My initial problem was that I suddenly could not copy purchased music from iTunes to my iPod. I tried the suggestion of downloading the iPod Updater. The Updater did indicate that my iPod software, 2.2, "needs update". Upon attempting to install the Updater (by clicking 'Update'), I received the following message: "The Updater does not have a firmware image." I notice that SEVERAL people are having the same problem at this very moment on this message board. I hope someone from Apple notices this fiasco and does something to fix it. Please help. Restoring my iPod is not an option for me. Thanks.

Yes, I've had this problem too. And the iPod has not been updated with any of the tracks I bought since updating to iTunes 5, but iTunes REloaded all the older tracks onto my iPod. Why? Seeing as the upgrade to iTunes 5 was a bit traumatic in itself, I'm not altogether surprised to discover the newer tracks had not been copied: there is obviously some incompatability here somewhere - but goodness knows where.

Latest Mavericks 10.9.2 update does not complete

Similar Messages

Maybe you are looking for