Latest PC Suite version fails after 1-2 system reb...

I've been using PC Suite successfully under XP SP3 with my 6102 phone connected via Nokia USB cable. When I updated PC SUite recently to v7.1.18.0 the suite worked fine, but after a couple of reboots of my computer it no longer registers the phone when I plug the cable in. When I tell PC Suite to "repair" itself, it knows that a Nokia phone is connected, even though it shows it as disconnected in the system tray area. I have unistalled and reinstalled PC Suite twice with repeateable results -- sees the phone initially, then refuses to connect fully after system reboots. Any ideas?

PC Suite Cleaner is no longer available on the Nokia web site. I found a copy (v3.6) on another site but when I tried to run it, I got a message that it would not work with the version of PC Suite that was "installed" (the fact that PC Suite Cleaner detected anyting at all proves that PC Suite uninstall left residual stuff on the hard drive). Tried reinstallng newest PC Suite (now for the fourth time), with the same result: Worked flawlessly, but icons did not appear in system tray area after reboot; when trying to uninstall or repair, it detects that a Nokia phone is connected, but PC Suite won't display icons or sync with phone with it unless I completely uninstall and reinstall it.

Similar Messages

  • PC Suite versions fail to install & PC Suite Clean...

    Hello,
    I had been enjoying the full functioning use Nokia E51 phone and of PC Suite, from v7.1.18.0 to v7.1.26.0  on my home PC and business laptop without any issues.
    On my home PC running XP SP3 I upgraded from  PC Suite v7.1.26.0 to v7.1.26.0 successfully - no problems
    My problem is with my corp business laptop.
    This is running XP Pro SP2. On this laptop PC Suite v7.1.26.0 was working perfectly [and I have really appreciated it].
    However, on attempting to upgrade to the latest v7.1.26.1 after starting the installer, which opens, no progress is made and error .txt produce. I went to Add/Remove programs and successfully uninstalled the v7.1.26.0, and all other Nokia software to attempt to make a fresh install.
    Unfortunately even a fresh d/l of PC Suite v7.1.26.1 and new attempt to install fails with the same message about 1 second into the install process.
    I tried installing the PC Suite v7.1.26.0 but this too now errors with the same message.
    I downloaded PC Suite Cleaner 7.1.1 but I cannot get this to complete...the progress bar stops almost as quick as it appeared... 0% complete.
    I have tried rebooting... I have used jv16 to search for 'Nokia' re entries and deleted these in an attempt to clean install [I am experienced and competant in pc tech]
    However, the exact same issue is present....no progress for either the PC Suite installer or the PC Suite Cleaner.
    The Corporate McAfee Security Suite has no logs that would indicate that it is blocking either of these software.
    I have attached  the Temp dumptext files that are generate.
    Your assistance time and energy trying to solve this issue greatly appreciated.
    Regards,
    farfes
    Attachments:
    3565_appcompat.txt ‏4 KB
    1dcf_appcompat.txt ‏4 KB

    Hello Miksu,
    Yes, I know the folders in my XP laptop that you are talking about.I had removed them and saved them in another place in my attempts to make a clean install.
    Unfortunately no new logs are created during the failed install attempts.
    Yes, there is the .exe installer for v7.1.26.0 in the Installations folder but this fails to run.
    However, I did find the .msi installers [v7.1.26.0] for both PC Connectivity Solution and PC Suite - these are:
    PCCS.msi
    Nokia_PC_Suite.msi 
    I was able to run them in the order they are above and the install was successful and software fully functioning.
    So, what I would now like to try is installing v7.1.26.1 using the .msi installers.
    Where would I get clean copies of these for PCCS.msi and Nokia_PC_Suite.msi ?
    miksu...thank you very much for the focus you gave me on the Installations folder
    Thanks
    farfes.

  • Latest OVI Suite Version - Unable to Copy Music, P...

    I have a Nokia n900 with the latest MAEMO 5 software on it.
    For some reason with the latest OVI Suite update I'm unable to copy Music, Pictures and Videos even the playlists that i make. I did a DROP/DRAG option and also right click and COPY TO DEVICE option. Odd thing though when i do choose the MASS STORAGE options and take a look at .audio folder there is one file that was copied ONLY but its corrupt.
    Just tried the BLUETOOTH connection instead since this wasn't there with prev version of the OVI Suite and then copying those media files and it works but it's a pain since i copy around 2GB of files and takes awhile...
    Whats wrong with the USB transfer capabilities on the latest OVI Suite?
    BTW already downloaded a fresh copy of the OVI suite and reinstalled and still the same issue. Also got a brand new cable and still the same.

    @noside143
    Sorry for the delay in answering but can only say no issues with OVI Suite v.3.1.1.80 on Xp SP3 device copying music from N900 on Global PR1.2 unfortunately:
    Happy to have helped forum with a Support Ratio = 42.5

  • Download JDeveloper 9052 full version fails after 15MB!

    The download fails after about 15MB even with the recommend getright. I tried from home with the same
    result.
    Haug
    -----StartRequest---------------2004/06/29-16:13:18-----
    Connecting to: download.oracle.com (via 133.147.122.15)
    !!!! ----Header Sent----
    GET http://download.oracle.com/otn/java/jdeveloper/905/jdev9052.zip HTTP/1.1
    Host: download.oracle.com
    Range: bytes=0-
    User-Agent: GetRight/5.1
    Accept: */*
    Cookie: ORA_UCM_VER=%2FMP%2F8%60scpecpMP%2F8%5EqancanMP%2F8%2F26%2C65%2C7%2C22MP%2F8-04*43*5*00; ORA_UCM_INFO=3~709697D0666C4757E034080020CB1B7C~Haug~B%C3%BCrger~buerger~DEU~en~33~22~5~null~0; ORA_UCM_SRVC=3*OTN~1~0~//~null~*GMO~1~0~//~null
    Accept-Encoding:
    Pragma: no-cache
    Cache-Control: no-cache
    Proxy-Authorization: Basic aGF1ZzpmamRrc2xhMjU=
    !!!! ----Header Recv----
    HTTP/1.0 302 Found
    Date: Tue, 29 Jun 2004 14:13:18 GMT
    Server: HotRoute
    Location: http://download-uk.oracle.com/otn/java/jdeveloper/905/jdev9052.zip
    Content-Type: text/html; charset=iso-8859-1
    Connection: Close
    !!!! Redirected to New Location
    -----StartRequest---------------2004/06/29-16:13:18-----
    Connecting to: download-uk.oracle.com (via 133.147.122.15)
    !!!! ----Header Sent----
    GET http://download-uk.oracle.com/otn/java/jdeveloper/905/jdev9052.zip HTTP/1.1
    Host: download-uk.oracle.com
    Range: bytes=0-
    User-Agent: GetRight/5.1
    Accept: */*
    Cookie: ORA_UCM_VER=%2FMP%2F8%60scpecpMP%2F8%5EqancanMP%2F8%2F26%2C65%2C7%2C22MP%2F8-04*43*5*00; ORA_UCM_INFO=3~709697D0666C4757E034080020CB1B7C~Haug~B%C3%BCrger~buerger~DEU~en~33~22~5~null~0; ORA_UCM_SRVC=3*OTN~1~0~//~null~*GMO~1~0~//~null
    Accept-Encoding:
    Pragma: no-cache
    Cache-Control: no-cache
    Proxy-Authorization: Basic aGF1ZzpmamRrc2xhMjU=
    !!!! ----Header Recv----
    HTTP/1.0 200 OK
    Date: Tue, 29 Jun 2004 14:13:18 GMT
    Server: Oracle HTTP Server Powered by Apache
    Last-Modified: Thu, 20 May 2004 16:22:43 GMT
    ETag: "54c33-f3f7ea3-40acdb53"
    Content-Length: 255819427
    Content-Type: application/zip
    Connection: Close

    I tried with and without download manager from two different locations (providers). No go. I always get the same size of file, about 15MB. It seems that Oracle has a problem.
    The funny thing is that there is no contact to inform the web side maintainers about the problem. With a support contract they might help me but without...
    I have to go down to the DB department to fetch the number that Oracle can promote it's products, no way.

  • Where Can I find latest SOA suite version for Windows 64-bit Op system

    Hi All,
    I want to download all the softwares required for SOA Suite 11g latest(11.1.1.7.0) version for 64-bit windows home premium version?
    When I looked at the default link for that,It is giving 32-bit ,linux and generic installer version in drop down list.
    Is it generic installer that is targeted for 64-bit operating system?
    Can you give exact link or information where should I download all the softwares for 64-bit system?
    Thanks in advance

    Try
    https://edelivery.oracle.com/
    Note: You should be a registered user here.
    Give points - it is good etiquette to reward an answerer points (5 - helpful; 10 - correct) for their post if they answer your question.
    Thanks,
    Vijay

  • PC-Suite sync fails after Firmware upgrade of E65

    After firmware upgrade of E65 PC-Suite stops syncing Calendar & Contacts from outlook. No error messages, just "0 entries has been updated".
    - PC-Suite updated to 7.0.9.2
    - Outlook 2003
    - XP Prof.
    Any ideas?
    Solved!
    Go to Solution.

    The funny thing is - the notes are synced???? If I restore some old contacts they'll double up in outlook, so I think the problem is, that the sync app doesn't see the outlook contact & calendar folder.
    Does somebody has an idea?

  • RMAN Backup job fails after changing sys, system passwords

    Hello Oracle community,
    11.1g
    After we changed the passwords for sys, system and sysman the backup jobs fails. this is my error log:
    Recovery Manager: Release 11.1.0.7.0 - Production on Mo Aug 30 11:16:29 2010
    Copyright (c) 1982, 2009, Oracle and/or its affiliates. All rights reserved.
    RMAN>
    RMAN-00571: ===========================================================
    RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
    RMAN-00571: ===========================================================
    ORA-12532: TNS: Ungültiges Argument
    RMAN>
    Echo einstellen ein
    RMAN> set command id to 'BACKUP_MEGALON.INT_083010111617';
    Befehl wird ausgeführt: SET COMMAND ID
    RMAN-00571: ===========================================================
    RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
    RMAN-00571: ===========================================================
    RMAN-03002: Fehler bei set Befehl auf 08/30/2010 11:16:29
    RMAN-06171: Nicht bei Zieldatenbank angemeldet
    RMAN> backup device type disk tag 'BACKUP_MEGALON.INT_083010111617' database;
    Starten backup um 30.08.10
    RMAN-00571: ===========================================================
    RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
    RMAN-00571: ===========================================================
    RMAN-03002: Fehler bei backup Befehl auf 08/30/2010 11:16:29
    RMAN-06171: Nicht bei Zieldatenbank angemeldet
    RMAN> backup device type disk tag 'BACKUP_MEGALON.INT_083010111617' archivelog all not backed up;
    Starten backup um 30.08.10
    RMAN-00571: ===========================================================
    RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
    RMAN-00571: ===========================================================
    RMAN-03002: Fehler bei backup Befehl auf 08/30/2010 11:16:29
    RMAN-06171: Nicht bei Zieldatenbank angemeldet
    RMAN> exit;
    Recovery Manager abgeschlossen.
    Ikrischer

    Hello Tychos,
    I am able to make a sqlplus connection, but your hint send me in the correct direction. I had a special character "@" in the password and I think that was the reason for my problems with RMAN.
    Ikrischer

  • Photo booth again fails after Update of System

    A few months ago I found my Photo Booth stopped showing a camera picture after I upgraded with a System Update but then cured the problem after a simple Reboot.
    Well the photo booth has again failed to operate following a recent Update of the OS and all I get is a blank screen. This time it won't kick start after a re boot. Is there any way to find out why it won't switch on its internal camera and cure it for good.
    The saved snapshots will show in the photo booth but it's simply the "live" picture that won't work.
    There is plenty of daylight in the room so it shouldn't be just a black screen should it?
    Thanks
    Plado

    I think I can pull this question off now. The system has wrong-footed me again.
    It seems to be that when you have too many computers all calling upon the same wireless broadband connection in the one building, the DNS or something gets choked.
    I switched off the router the modem the wireless and the main desktop pc
    I then rebooted them all. After it was all up and running I turned on the MacBook and connected via the usual AirPort and both Google Earth and PhotoBooth were running as sweet as a nut.
    It seems all too easy to think the Macbook has got itself in a twist when in fact it's just responding to a tired and emotional broadband connection that has lost its bandwidth due to over crowded usage.
    I'll close this question now.
    Sorry to alert anyone.
    Plado

  • Copy command fails after installing Raid system and new user accounts

    Any help is appreciated. We installed a Raid to an existing Xserve at our school. We have created new accounts on the server.All other commands such as observe, control, sending messages and so works OK.
    When I try to copy files, pictures, and so on... it immediately fails. It gives me no explanation or anything.
    Any help?

    Hi Tilly,
    We had this same exact problem at our school. Copying to network users always failed, everything else worked fine.
    We changed the owner of the Sharepoint where the student accounts reside from our Administrator user to 'Root'
    We changed this through Workgroup Manager -> Sharing, selected the Sharepoint in the left column, clicked on the Access tab and changed the owner to 'root' and click save.
    Also found this link:
    http://lists.apple.com/archives/remote-desktop/2007/Nov/msg00009.html
    Hope this helps!

  • Camera Clearity failed after udgrading system of Lenovo A6000 plus

    Sirs,A month ago I had purchse a Lenovo A6000 plus and after the month I have upgrade its system version but after upgradtion of system I have lost its camera quality... Please tell me some suggestion how to downgrade the system to previous one or what to do to get back camera quality of my handset. Your attention to this matter will greatly appreciated. ThanksMunisha

    Hi, I also did the same thing I have the same problem like as you Someone please help :smileyembarrassed 

  • After dowloading latest PC suite the programme bom...

    Downloaded latest PC suite ver 7.1.26.0, using Vista 32 bit and E66 phone. PC suite was working fine, now as soon as I send one message the programme won't work. The phone is apparently still "connected" but attempts to send further message result in "Failed to send the message" popup screen. Attempts to refresh the view of the inbox shows no messages, although they are viewable on the phone. Closing PC suite is not enough to restore connection although the phone is visible & "connected" in PC suite. Have to either unpair & re-pair the phone, or shut down & restart the computer to see messages again, and the same thing happens when a message has been sent. I have uninstalled version 7.1.26.0, used PC suite cleaner and reinstalled 7.1.18.0, and the same thing happens there now. I have also upgraded my phones firmware to ver 210.21.007 and that has not helped.  Suggestions/help please.

    Exactly the same thing happens on a USB cable connection

  • [SOLVED] GTK applications failing after latest update

    Several GTK applications are failing after the latest updates.
    So far, I have found Bleachbit and Gtkpacman are crashing, but there may be more.
    They all give the  same error messages (obviously, the application name/line number in the first line varies):
    File "/usr/bin/bleachbit", line 41, in <module>
    import gtk
    File "/usr/lib/python2.7/site-packages/gtk-2.0/gtk/__init__.py", line 40, in <module>
    from gtk import _gtk
    ImportError: /usr/lib/python2.7/site-packages/gtk-2.0/gtk/_gtk.so: undefined symbol: gtk_combo_box_set_entry_text_column
    How do I fix this?
    Many thanks in advance.
    Last edited by myrlin (2011-05-07 10:17:03)

    How do you manage to reply to my problems before I've finished typing, Wonder??
    VERY many thanks once again.
    pacman -Q pygtk gtk2 give different versions, as I haven't yet been able to fix my previous problem with Firefox 3.6 (machine in constant use), so I guess that's the problem.
    Thank you SO much for your help, support and patience.

  • I bought Creative suite 5 a few years ago, my computer's hard drive failed, after It was fixed I re installed my program and it now says my Serial number is not valid.

    I bought Creative suite 5 a few years ago, my computer's hard drive failed, after It was fixed I re installed my program and it now says my Serial number is not valid.
    I'm on the last day of a 30 day trail... it won't take my serial number which is the same one that worked before

    Contact support by web chat.
    Mylenium

  • While attempting to install the latest iTunes update, version 10.5.3, I encountered an issue. I was forced to download this update manually which, after restarting my Windows 7, did not install properly. How do I get it to install this update?

    While attempting to install the latest iTunes update, version 10.5.3, I encountered an issue. I was forced to download this update manually which, after restarting my Windows 7, did not install properly. How do I get it to install this update?

    The installer should have gone into your Apple Software Update folder:
    C:\USERS\<user name>\AppData\Local\Apple\Apple Software Update
    Right mouse click the msi file and select INSTALL

  • Hey, i have very strange prob with my iphone 5(latest version/updated), after resetting it, so it doesn't connect to my laptop, even it doesn't charge too. it does charge from wall charger i try all the possible methods but still i am facing the prob

    Hey, i have very strange prob with my iphone 5(latest version/updated), after resetting it, so it doesn't connect to my laptop, even it doesn't charge too. it does charge from wall charger i try all the possible methods but still i am facing the prob any fix/solution for it.. Helppppp!!!!!!!!!!!!!!!!!!!!!!!! As soon as possible, it will be gratefulness,
                                Thnksssssss....

    So you are saying that you followed all of the steps in the support document for problems with connection, including removing and reinstalling iTunes? You do not say what you have tried, so it is hard to make recommendations. If this is the case, then you have tried resolving driver issues? What if you go to Device Manager and look for the iPhone. You should be able to click on it and see about drivers. You can update/reinstall the device driver.

Maybe you are looking for