Latest quicktime update not compatible with Serato Scratch Live program

I'm a DJ/VJ that uses the serato program which uses quicktime to run the videos. The latest update with quicktime has totally screwed up the video program and is no longer compatible with it. I can't open itunes anymore and have to use an older version of quicktime. Anything older than 7.5 works... will there be an update to fix this issue???

You could send a bug report through to Apple. (We're a user-to-user troubleshooting forum, so there's no guarantee that someone from Apple will see your post here.) The "Technical comments" feedback type on the QuickTime feedback form would probably do the trick:
http://www.apple.com/quicktime/feedback/

Similar Messages

  • Windows latest forced nVidia update not compatible with HP Firebird PC

    The latest windows update is including an "Important" October 2012 update from Nvidia that is not compatible with the Firbird's graphics.      It completely trashes the graphics and will only run in the low-power hybrid mode.     I re-installed the HP driver, only to have it reset again by the Windows update and had to do it all over again.   If anyone is having this problem, make sure you disable the nVidia update.
    (Firbird 803, Vista-64)

    I'm using Windows 7 but I assume Vista works more or less the same.
    Select Windows Control Panel, System, Advanced System Settings, Hardware, Device Installation Settings, Never install driver software from Windows Update and Save Changes.
    Select Windows Update and Check for Updates.  Right-Click any Nvidia drivers and select Hide Update.
    2 x HP Firebird 802 + 2 x HP 2159m monitor + Windows 7 Home Premium + Windows 8.1 Pro with Media Center
    GeForce Driver Version 266.58 WHQL installs correctly without modification.
    GeForce Driver Version 296.10 WHQL requires modified NV_DISP.INF file to install correctly but Nvidia Control Panel is broken.
    GeForce Driver Version 340.52 WHQL requires modified NV_DISP.INF file to install correctly but 2-way SLI is broken.

  • New update not compatible with my computer processor (PPC)

    I have a Mac G4 PPC 1.5GHZ with 1.25G Ram and Mac os 10.5.8
    Used to have FireFox installed on my computer until I made the mistake to try to update the program using it's built in software update feature.
    All went well until I tried to run Firefox after the install was complete. Up comes the message that the software is not compatible
    with my computers architecture.
    Now the install has erased my original Firefox and i cant seem to find a version anywhere that will work on a PPC.
    Can you assist?

    For older Macs that aren't supported in Firefox 4 / 5 / 6, try TenFourFox for PowerPC's running Mac 10.4.11 & 10.5.8 . <br />
    http://www.floodgap.com/software/tenfourfox/ <br />
    http://code.google.com/p/tenfourfox/downloads/list
    Or use 3.6.20 <br />
    http://www.mozilla.com/en-US/firefox/all-older.html

  • Is it true that the latest upgrade is not compatible with AVAST AntiVirus programs? I saw a post with one of the recent updates, and suggested it wouldn't work with my AVAST?

    As Above. Before I download the recent update to Fire Fox I want to be certain that it is compatible with ALL AVAST ANTI Virus programs, or I will simply not down load it.

    The only thing about Avast that might not be compatible is their Web Rep extension for Firefox. If that is the case, it is up to Avast to keep their Firefox add-on up-to-date as Mozilla releases new versions of Firefox. Did you check with Avast to see if an update is available? If there is, you probably need to have Firefox 5.0 installed to be able to install that update.
    http://forum.avast.com/

  • Trying to update to 6.0.5 but it won't let me unless I use appstore and appstore only has later updates not compatible with my OS. Help?

    I recently recorded something on my friends laptop using his Garageband. But then I was trying to transfer it to my computer and it says I need to update to 6.0.5 to be able to open the file. However when I try and update it it gives me this message "The version of GarageBand installed on this Mac must be updated through the Mac App Store. Check the Mac App Store to see if an update is available." So I went to App Store to update it but the only garageband related thing I could find there was the 10.0.2 update which was too big an update and wouldn't run with my OS anyway. How do I get the 6.0.5 update? Whould I delete Garageband and reinstall using the 6.0.5? Also my OS is 10.7.5 if that helps.

    Whould I delete Garageband and reinstall using the 6.0.5? Also my OS is 10.7.5 if that helps.
    That will not work. The GarageBand 6.0.5 updater from the Apple Support page is not a full installer. You will need an installer disk for GarageBand '11, for example the boxed iLife '11 disk to install a GarageBand '11 version, that can be updated with that 6.0.5 updater.
    So I went to App Store to update it but the only garageband related thing I could find there was the 10.0.2 update
    The AppStore should not be showing you the 10.0.2 udpdate, if your system is not compatible. Or have you upgraded to MacOS 10.9.2?

  • Update not compatible with my computer :/

    Dear apple,
    Please make the next software update compatible with the white 13" macbook!  Thanks!

    I doubt that future releases will support hardware older than the GM release of Mountain Lion.  You'll probably need to either update your machine or stay on Lion.

  • Update not compatible with my ipod?

    A few apps I bought are only compatible with the iOS 4.0 or higher. I have an ipod touch 1G and the update isn't compatable with that device. What do I do?

    Since there are HW differences there is no much we can do really, other than getting a newer iTouch. Mine is also 1G

  • App updates not compatible with ios

    I have the original Ipad, ios version 5.1.1.  i got notified to update several apps and did. now they have been deleted because they wont work with my version of ios. Cant update ios any further than it is. it is the original ipad. so, can I get lower version of the app? i never would have updated the app if i knew it wouldnt work with my version of the ios. help

    Perhaps one or more of the following links may help:
    iOSSearch - search the iTunes store for compatible apps.
    Vintapps 3.1.3 - paid app.
    Apple Club - filter apps by iOS version.

  • Photoshop elements 11 camera raw update not compatible with my camera

    my PSE11 was working fine until i bought a new camera and tried to upload photos from my RAW files. It gave me this message
    "Could not complete your request because the file appears to be from a camera model which is not supported by the installed version of Camera Raw.
    Please visit the Camera Raw help documentation for additional information."
    so i tried to install the update.... installed it fine, kept getting the same message when i would try to open the photo. after researching online i found the suggestion of uninstalling and reinstalling photoshop elements. i did that once, tried the update again...same results. uninstalled again. tried the update again and still getting the same message. ive checked the adobe website and everywhere i look says the version of the camera raw DOES support my camera (nikon D7100). im at my wits end with this and dont know what else to do. please help!!!

    So what version of Camera Raw is installed?
    In PSE Editor, Help->About Plug-In->Camera Raw
    And what is your operating system?

  • Canvio 3tb update not compatible with ZFS

    Hello,
    I have been using mutiple Canvio 3tb usb drives (all purchased this year) in striped sets on a backup server running FreeBSD 10 and utilising the ZFS filesystem. Recently I purchased two more identical drives to increase the pool but these are not correctly recognised by ZFS. The most significant difference appears to be that the later drives impose a 32kb stripesize whereas this is zero on the earlier models.
    The disks work perfectly well on a Win7 system, so there is nothing faulty in the hardware.
    Is it possible to change the disk settings or firmware to be the same as the slightly earlier models?
    This is the working configuration on the older disks
    ========================================
    diskinfo -v da6
    da6
            4096            # sectorsize
            3000592982016   # mediasize in bytes (2.7T)
            732566646       # mediasize in sectors
            0               # stripesize
            0               # stripeoffset
            45600           # Cylinders according to firmware.
            255             # Heads according to firmware.
            63              # Sectors according to firmware.
            201308090203EC  # Disk ident.
    ......and this is the failing configuration on the latest disks
    ============================================
    diskinfo -v da0
    da0
            4096            # sectorsize
            3000592977920   # mediasize in bytes (2.7T)
            732566645       # mediasize in sectors
            32768           # stripesize
            0               # stripeoffset
            45600           # Cylinders according to firmware.
            255             # Heads according to firmware.
            63              # Sectors according to firmware.
            20140619016424  # Disk ident.

    I doubt that future releases will support hardware older than the GM release of Mountain Lion.  You'll probably need to either update your machine or stay on Lion.

  • Promise pegasus pr 6 update not compatible with mavericks?

    Promise Pegasus PR6 with Thunderbolt has crashed with Promise Utility Update 3.18.0000.18.      New Thunderbolt Bridge does not configure nor does it work.  Mac cannot Find RAID.   Tried everything.  Boot and Re-boot and Power cycle.  Mac cannot find the PR6...PR6 cannot find the Mac.  On OS 10.9.1.

    We're glad that you have been helped! For anyone else reading this, if you have a serious problem like this, call us at Promise Technical Support 408-228-1500 and/or open a web support case at http://support.promise.com
    Joe Engledow
    Technical Support
    Promise Technology

  • Updated not compatible with Itouch model

    Just downloaded an updated to AOL radio app however did not see it required a newer gen model of itouch ( I have first gen) is there a way to restore to previous version of AOL Radio app?

    No way that I know of if you actually installed it on your iPod unless you have a backup of the old app in your computer's backup. Restoring from backup will not help since the backup on contains application data, not the application itself.

  • I want to upgrade to iPhoto/iMovie '11 but the latest release is not compatible with OSX 10.6.8

    Can I buy an older version anywhere? Or am I being coerced into buying Lion? I tried looking through the app store but it seems increasingly likely that I'm going to have to buy an old iLife disc of someone, or upgrade. Unfortunately I'm using a late 2007 Macbook (not even Macbook pro) which handles leopard but not sure if it will handle Lion.
    Currently I'm running...
    OSX 10.6.8
    iPhoto '08 7.1.5
    iMovie '08 7.1.4

    Thanks! I found iLife 11 on amazon, but can I download it? I don't mind paying for it, just don't want to wait. Thanks.
    two_macs...

  • SMC Firmware update NOT compatible with Adobe Version Cue

    After 2 days of SMC Firmware install & reboot problems (and many other folks in this forum), I went to my Apple Store Genius who resolved the issue by turning off Adobe Version Cue at startup.
    It is now a know problem at Apple.

    Now it seems logical that if OSX can boot in Safe Mode it's probably a StartUp program conflict ... and NON-universal programs are likely culprits according to the Apple Genius.

  • Is Firefox 4 b not compatible with Microsoft Windows Live?

    Microsoft Windows Live functions, (Hotmail, agenda etc...) do not work properly in Firefox 4b. Firefox gets crazy and keeps polling. Loosing control and navigation from mailbox and content does not open after clicking.
    So far no resolutions found here.
    Is there a cure?

    From the following article '''''"...it’s a problem with the Hotmail code causing an HTML5 incompatibility."'''''
    See: http://www.zdnet.com/blog/hardware/hotmail-bug-means-more-firefox-4-betas/11240
    Also see:
    *http://support.mozilla.com/ilo/questions/778886
    *http://support.mozilla.com/en-US/questions/778953
    <br />
    '''Other issues that need your attention'''
    The information submitted with your question indicates that you have out of date plugins with known security and stability issues that should be updated. To see the plugins submitted with your question, click "More system details..." to the right of your original question post. You can also see your plugins from the Firefox menu, Tools > Add-ons > Plugins.
    *Adobe PDF Plug-In For Firefox and Netscape "9.4.1"
    **New Adobe Reader X (version 10) with Protected Mode was released 2010-11-19
    **See: http://www.securityweek.com/adobe-releases-acrobat-reader-x-protected-mode
    **'''''<u>Security update for Adobe Reader released 2011-02-08</u>'''''
    #'''Check your plugin versions''': http://www.mozilla.com/en-US/plugincheck/
    #*'''Note: plugin check page does not have information on all plugin versions'''
    #'''Update Adobe Reader (PDF plugin):'''
    #*From within your existing Adobe Reader ('''<u>if you have it already installed</u>'''):
    #**Open the Adobe Reader program from your Programs list
    #**Click Help > Check for Updates
    #**Follow the prompts for updating
    #**If this method works for you, skip the "Download complete installer" section below and proceed to "After the installation" below
    #*Download complete installer ('''if you do <u>NOT</u> have Adobe Reader installed'''):
    #**Use the links below to avoid getting the troublesome "getplus" Adobe Download Manager and other "extras" you may not want
    #**Use Firefox to download and SAVE the installer to your hard drive from the appropriate link below
    #**Click "Save to File"; save to your Desktop (so you can find it)
    #**After download completes, close Firefox
    #**Click the installer you just downloaded and allow the install to continue
    #***Note: Vista and Win7 users may need to right-click the installer and choose "Run as Administrator"
    #**'''<u>Download link</u>''': ftp://ftp.adobe.com/pub/adobe/reader/
    #***Choose your OS
    #***Choose the latest #.x version (example 9.x, for version 9)
    #***Choose the highest number version listed
    #****NOTE: 10.x is the new Adobe Reader X (Windows and Mac only as of this posting)
    #***Choose your language
    #***Download the file, SAVE it to your hard drive, when complete, close Firefox, click on the installer you just downloaded and let it install.
    #***Windows: choose the .exe file; Mac: choose the .dmg file
    #*Using either of the links below will force you to install the "getPlus" Adobe Download Manager. Also be sure to uncheck the McAfee Scanner if you do not want the link forcibly installed on your desktop
    #**''<u>Also see Download link</u>''': http://get.adobe.com/reader/otherversions/
    #**Also see: https://support.mozilla.com/en-US/kb/Using+the+Adobe+Reader+plugin+with+Firefox (do not use the link on this page for downloading; you may get the troublesome "getplus" Adobe Download Manager (Adobe DLM) and other "extras")
    #*After the installation, start Firefox and check your version again.

Maybe you are looking for

  • Login to Development from Firefox 1.5.0.3??

    Has anyone have problems logging into htmldb dev from FIrefox 1.5.0.3. I can log in using ssl, but when trying http:// I log in and get rediected to same page. When I use the IE tab options, it works fine using IE Rendering. Sample mod_plsql log. Is

  • Thunderbolt docks on snow leopard

    I was thinking about getting one of the thunderbolt docks (belkin, matrox, or caldigit when it comes out). My early 2011 MBP quad i7 2.0 (has thunderbolt port) is running snow leopard and I am reluctant to upgrade. These thunderbolt docks stipulate m

  • Create a Lookup for ProjetServer field in SharePoint List item

    Hi, I would like to display values in custom fields of MS Project Server 2010 in Ms SharePoint list 2010. The values ought to be displayed as lookup in a field of Listitem form. I would like to futher query and populate certain fields in New Items fo

  • Oracle SQL Developer  (1.1.0.21.97) no progress widget ...

    When you run a query or report there were a progress icon, now just the cursor shows the busy state, is it going to disappear? It seems getting better.

  • Anyone have a link to download 7.6?

    I really am getting tired with all of the network connection issues with 7.7. Ever since I installed it, it's been nothing but one problem after another. If anyone could please post a link for itunes 7.6, it would be greatly appreciated.