Latest releng ISO's

Ok i really didn't know where or even if i should post this but i just wanted to thanks the releng devs for their work.
I had some problems in the past but the latest releases really seem to shape up nicely.
The latest 2011.05.12 ISO especially (found @: http://releng.archlinux.org/isos/ ) installs perfectly without a single glitch on me.
Now i know that one guy running a standard setup with success doesn't say much, but i encourage more people to try them since a "final" version doesn't look far in my eyes.
Last edited by freestyler7 (2011-05-12 18:06:18)

karol wrote:
essence-of-foo wrote:I think these images should be mentioned on the Arch downloads page as inofficial installers. There is hardly a way for newcomers to learn about them.
Those are testing isos, which aren't meant for newcomers.
http://www.archlinux.org/releng/feedback/
anyone can use the isos, newcomer or not. as long as you're aware these are testing builds.
and feedback is very appreciated, in fact is a must. not enough feedback == no new official release. (thanks freestyler for the feedback)
i cannot put any information about these images on the download page because that would cause too much traffic.
Last edited by Dieter@be (2011-05-13 13:25:16)

Similar Messages

Wrong file naming on latest installation ISO

Hi all.
I whose trying to install Arch from latest installation ISO without any success. I whose thinking that whose problem with UEFI and USB combination, similar to this
Boot USB installation as EFI
I've whose getting same output as on this screenshot
But after studying error messages, I've noticed some wrong file naming:
\ARCH\X86_64\USR_LIB_MODULES_FS.SFS
\ARCH\X86_64\ROOT_IMAGE_FS.SFS
\ARCH\I686\USR_LIB_MODULES_FS.SFS
\ARCH\I686\ROOT_IMAGE_FS.SFS
\ARCH\ANY\USR_SHARE_FS.SFS
Setup expects to find
\ARCH\X86_64\USR-LIB-MODULES.FS.SFS
\ARCH\X86_64\ROOT-IMAGE.FS.SFS
\ARCH\I686\USR-LIB-MODULES.FS.SFS
\ARCH\I686\ROOT-IMAGE.FS.SFS
\ARCH\ANY\USR-SHARE.FS.SFS
After changing file names, setup boots up normally and start shell. This is problem with file names or in ARCHISO.IMG?
Hope it helps for others to run installation media.
Hope it helps for others to run installation media.

thanks alot for the clarification, I tried to search Google on this trouble and I finally found this post!
I also had to rename, although I extracted with 7-zip I renamed both the ROOT_IMAGE.FS.SFS files to whatever was tried at the prompt ...
We really should put some pre-built alternative images up for this on the download-page

HT4623 I have a new iphone5 and about 5 meters wifi signal is reduced to one scale, and finally cut off my connection with routerom.I also have iphone 4s and ipad3 and on those I have full signal everywhere. I installed the latest softwer iso 6.0.2 and

I have a new iphone5 and about 5 meters wifi signal is reduced to one scale, and finally cut off my connection with routerom. I also have iphone 4s and ipad3 and on those two I have full signal everywhere. I installed the latest softwer iso 6.0.2 and I still have a problem!

Just get into "General" -> last option is "RESET" -> Opt for "RESET NETWORK SETTINGS"
Your phone will reeboot in a couple of minutes n then get fine on with full signal on the wifi scale.
Worked perfect for me. Do try n let me know.
ATB

Latest upgrade, ISO 7.02

Every since the latest upgrade to the ISO 7.02, my recipe app keeps freezing up when I use the full screen mode. Any suggestions?

Hello there, Marie57.
The following Knowledge Base article provides some great steps for troubleshooting your issue:
iOS: Troubleshooting apps purchased from the App Store
http://support.apple.com/kb/TS1702
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

2011.02-2 archboot "2k11-R1" ISO hybrid image released

Hi Arch community,
Arch Linux (archboot creation tool) 2011.02-1, "2k11-R1" has been released.
To avoid confusion, this is not an official arch linux iso release!
Homepage and for more information on archboot:
http://wiki.archlinux.org/index.php/Archboot
Summary:
- bump to latest kernels and introduce full UEFI bootloader support with new grub2 packages.
Hybrid image file and torrent is provided, which include
i686 and x86_64 core repository. Please check md5sum before using it.
Hybrid image file is a standard CD-burnable image and also a raw disk image.
- Can be burned to CD(RW) media using most CD-burning utilities.
- Can be raw-written to a drive using 'dd' or similar utilities.
This method is intended for use with USB thumb drives.
Please get it from your favorite arch linux mirror:
https://downloads.archlinux.de/iso/archboot/2011.02/
<yourmirror>/iso/archboot/2010.12/
/boot for PXE/Rescue files are provided here:
https://downloads.archlinux.de/iso/arch … 11.02/boot
<yourmirror>/iso/archboot/2011.02/boot
Changelog:
General:
- kernel 2.6.37.1 / LTS kernel 2.6.32.29
- pacman 3.4.3 usage
- RAM recommendations: 320 MB
Kernel changes:
- bump to latest .37 series and bump lts to latest .32 series
Environment changes:
- updated to latest syslog-ng 3.2.x
- updated clamav
- updated pacman mirrorlist
- cleanup in hooks and remove redundant code
- replaced grub by grub2
setup changes:
- many internal changes, like use bash test and use brackets for all variables
- added UEFI bootloader
- move syslinux and extlinux in one bootloader menu
- some dmraid fixes
- add new grub2/grub2-efi package support
- allow nilfs2 for grub2
- allow dmraid for grub2
- install filesystem package, for detected filesystems
- install dmraid package, if dmraid device is detected
- fixed cryptsetup device reset
- some cryptsetup menu additions
- changed default encryption mode to
aes-cbc-essiv:sha256 -s 128
- don't use rootflags, if not necessary
hwdetect changes:
- none
quickinst changes:
- none
KNOWN ISSUES:
- FTP installation mode:
None
- CD installation mode:
None
Further documentation can be found on-disk and on the wiki.
Have fun!
greetings
tpowa
Last edited by tpowa (2011-02-20 18:14:19)

steve___ wrote:
It says:
Welcome to GRUB! (screen refreshes and these two flash flash on the screen:)
NO SUITABLE MODE FOUND
NO VIDEO MODE ACTIVATED
I choose "Arch Linux (i686) archboot" and get:
Booting a command list
After approximately 30 second it times out and the computer reboots
When grub2 menu loads, highlight the option you want and edit the menu the menu adding these lines to the top of the command list
rmmod efi_gop
insmod efi_uga
set gfxmode=auto
set gfxpayload=keep
before "linux ..." line and tell me whether you are getting boot messages on screen. Also archboot grub2-efi menu should show no fallback entries (there aren't any. It should show
I did this and see no change. I get the above message of "Booting a command list"
Can you try removing nomodeset in the "linux ..." line in "Arch Linux (i686) archboot" (edit mode) along with adding the above lines, and reboot.
Also type in grub2 prompt
grub> set
and tell me what it it show for _EFI_ARCH= , i386 or x86_64 .
It says "i386".
You have 32-bit EFI, which is very old. You need to remove efi booting support from archboot. Extract archboot iso to any dir. Install extra/{libisoburn,libisofs,libburn} packages. Cd into the extracted dir and run
xorriso -as mkisofs -rock -joliet \
-max-iso9660-filenames -omit-period \
-omit-version-number -allow-leading-dots \
-relaxed-filenames -allow-lowercase -allow-multidot \
-volid "ARCHBOOT" \
-eltorito-boot boot/syslinux/isolinux.bin \
-eltorito-catalog boot/syslinux/boot.cat \
-no-emul-boot -boot-load-size 4 -boot-info-table \
-output ../archboot.iso ./
Last night I booted an old CD, 2009.08. I did the install and tried to use grub2 as the bootloader with no success. I tried both the 'grub2-bios' and 'grub2-efi-i386' installing them to /dev/sda. On reboot I don't get a grub prompt, just the message "No bootable device -- insert boot disk and press any key".
What was the exact error? Did you read http://wiki.archlinux.org/index.php/GRUB2 instructions?
I may give up after this, use the 2009.08 boot CD and try to use the grub/MBR method as I was using. The reason I decided to try grub2 was I just installed an SSD. In the archwiki grub2 it suggests "By default, Apple's firmware switches SATA drives into IDE mode (not AHCI mode) when booting any OS besides Mac OS. It is easy to switch back to AHCI if you are using GRUB2 with an Intel SATA controller." This can be done by setting:
setpci -d 8086:27c4 90.b=40
in /etc/grub/grub/cfg
I understand these questions are OT, but I thought I'd ask:
1) Does GPT have any other advantage than setting the starting sector to 2048? I was thinking of using fdisk to do this along with grub (not grub2) -- Are there any flaws in my ignorance?
2) Do you know if it's possible to set AHCI mode with grub?
1) Using fdisk itself was a mistake. Macs use GPT and you should have used gdisk (available in archboot iso and latest releng test isos http://releng.archlinux.org/isos/).
2) No idea about AHCI. Like I said I don't have a Mac to try these things.

2011.10-1 archboot "2k11-R6" ISO hybrid image released

Hi Arch community,
Arch Linux (archboot creation tool) 2011.10-1, "2k11-R6" has been released.
To avoid confusion, this is not an official arch linux iso release!
Homepage and for more information on archboot:
http://wiki.archlinux.org/index.php/Archboot
Summary:
- Only use one lzma initrd for each architecture, plain bugfix release.
Hybrid image file and torrent is provided, which include
i686 and x86_64 core repository. Please check md5sum before using it.
Hybrid image file is a standard CD-burnable image and also a raw disk image.
- Can be burned to CD(RW) media using most CD-burning utilities.
- Can be raw-written to a drive using 'dd' or similar utilities.
This method is intended for use with USB thumb drives.
Please get it from your favorite arch linux mirror:
https://downloads.archlinux.de/iso/archboot/2011.10/
<yourmirror>/iso/archboot/2011.10/
/boot for PXE/Rescue files are provided here:
https://downloads.archlinux.de/iso/arch … 11.10/boot
<yourmirror>/iso/archboot/2011.10/boot
Changelog:
GENERAL:
- kernel 3.0.6 / LTS kernel 2.6.32.46
- pacman 3.5.4 usage
- RAM recommendations: 320 MB
Kernel changes:
- bump to latest 3.0 series and bump lts to latest .32 series
Removed features:
- none
Environment changes:
- added smartmontools, dnsmasq, lftp, openconnect, speedtouch, nmap, tcpdump, weechat packages.
- added Hyper-V ( hv_ ) kernel modules
- updated pacman mirrorlist
hwdetect changes:
- none
setup changes:
- use cgdisk for GPT partitioning
quickinst changes:
- none
Further documentation can be found on-disk and on the wiki.
Have fun!
greetings
tpowa
Last edited by tpowa (2011-10-27 07:52:40)

the.ridikulus.rat wrote:
Is this problem occurring in latest Archboot iso or in some earlier version? The latest one had few changes in the way initramfs is created (one initramfs per arch, not one per kernel). Can you boot into the latest archboot and check whether
/lib/modules/3.0-ARCH/kernel/drivers/firmware/efivars.ko.gz
file exists?
Also can you post the output of
# dmesg | grep -i EFI
from within archboot?
It is the latest Archboot (2011.10-1) and /lib/modules/3.0-ARCH/kernel/drivers/firmware/efivars.ko.gz doesn't exist.
dmesg | grep -i EFI shows the following:
[ 0.000000] Command line: BOOT_IMAGE=/boot/vm64 ro add_efi_memmap none=UEFI_ARCH_x86_64 radeon.modeset=0
[ 0.000000] EFI v2.10 by American Megatrends
[ 0.000000] Kernel-defined memdesc doesn't match the one from EFI!
[ 0.000000] EFI: mem00: type=3, attr=0xf, range=[0x0000000000000000-0x0000000000008000) (0MB)
[ 0.000000] EFI: mem01: type=7, attr=0xf, range=[0x0000000000008000-0x000000000007f000) (0MB)
[ 0.000000] EFI: mem02: type=4, attr=0xf, range=[0x000000000007f000-0x0000000000080000) (0MB)
[ 0.000000] EFI: mem03: type=3, attr=0xf, range=[0x0000000000080000-0x00000000000a0000) (0MB)
[ 0.000000] EFI: mem04: type=2, attr=0xf, range=[0x0000000000100000-0x00000000003de000) (2MB)
[ 0.000000] EFI: mem05: type=7, attr=0xf, range=[0x00000000003de000-0x0000000001000000) (12MB)
[ 0.000000] EFI: mem06: type=2, attr=0xf, range=[0x0000000001000000-0x0000000001100000) (1MB)
[ 0.000000] EFI: mem07: type=4, attr=0xf, range=[0x0000000001100000-0x000000000136b000) (2MB)
[ 0.000000] EFI: mem08: type=3, attr=0xf, range=[0x000000000136b000-0x000000000136f000) (0MB)
[ 0.000000] EFI: mem09: type=4, attr=0xf, range=[0x000000000136f000-0x000000000139d000) (0MB)
[ 0.000000] EFI: mem10: type=3, attr=0xf, range=[0x000000000139d000-0x000000000139f000) (0MB)
[ 0.000000] EFI: mem11: type=4, attr=0xf, range=[0x000000000139f000-0x00000000013a0000) (0MB)
[ 0.000000] EFI: mem12: type=3, attr=0xf, range=[0x00000000013a0000-0x00000000013a8000) (0MB)
[ 0.000000] EFI: mem13: type=4, attr=0xf, range=[0x00000000013a8000-0x00000000013ae000) (0MB)
[ 0.000000] EFI: mem14: type=3, attr=0xf, range=[0x00000000013ae000-0x00000000013b1000) (0MB)
[ 0.000000] EFI: mem15: type=4, attr=0xf, range=[0x00000000013b1000-0x00000000013b2000) (0MB)
[ 0.000000] EFI: mem16: type=3, attr=0xf, range=[0x00000000013b2000-0x00000000013b5000) (0MB)
[ 0.000000] EFI: mem17: type=4, attr=0xf, range=[0x00000000013b5000-0x00000000013bb000) (0MB)
[ 0.000000] EFI: mem18: type=3, attr=0xf, range=[0x00000000013bb000-0x00000000013bc000) (0MB)
[ 0.000000] EFI: mem19: type=4, attr=0xf, range=[0x00000000013bc000-0x00000000013bd000) (0MB)
[ 0.000000] EFI: mem20: type=3, attr=0xf, range=[0x00000000013bd000-0x00000000013be000) (0MB)
[ 0.000000] EFI: mem21: type=4, attr=0xf, range=[0x00000000013be000-0x00000000013c0000) (0MB)
[ 0.000000] EFI: mem22: type=3, attr=0xf, range=[0x00000000013c0000-0x00000000013c1000) (0MB)
[ 0.000000] EFI: mem23: type=4, attr=0xf, range=[0x00000000013c1000-0x00000000013c9000) (0MB)
[ 0.000000] EFI: mem24: type=3, attr=0xf, range=[0x00000000013c9000-0x00000000013cc000) (0MB)
[ 0.000000] EFI: mem25: type=4, attr=0xf, range=[0x00000000013cc000-0x00000000013d6000) (0MB)
[ 0.000000] EFI: mem26: type=3, attr=0xf, range=[0x00000000013d6000-0x00000000013db000) (0MB)
[ 0.000000] EFI: mem27: type=4, attr=0xf, range=[0x00000000013db000-0x00000000013e6000) (0MB)
[ 0.000000] EFI: mem28: type=3, attr=0xf, range=[0x00000000013e6000-0x00000000013ec000) (0MB)
[ 0.000000] EFI: mem29: type=4, attr=0xf, range=[0x00000000013ec000-0x00000000013ed000) (0MB)
[ 0.000000] EFI: mem30: type=3, attr=0xf, range=[0x00000000013ed000-0x00000000013f4000) (0MB)
[ 0.000000] EFI: mem31: type=4, attr=0xf, range=[0x00000000013f4000-0x00000000013ff000) (0MB)
[ 0.000000] EFI: mem32: type=3, attr=0xf, range=[0x00000000013ff000-0x0000000001400000) (0MB)
[ 0.000000] EFI: mem33: type=4, attr=0xf, range=[0x0000000001400000-0x0000000001b8d000) (7MB)
[ 0.000000] EFI: mem34: type=3, attr=0xf, range=[0x0000000001b8d000-0x0000000001b8f000) (0MB)
[ 0.000000] EFI: mem35: type=4, attr=0xf, range=[0x0000000001b8f000-0x0000000001bc3000) (0MB)
[ 0.000000] EFI: mem36: type=3, attr=0xf, range=[0x0000000001bc3000-0x0000000001bc5000) (0MB)
[ 0.000000] EFI: mem37: type=4, attr=0xf, range=[0x0000000001bc5000-0x0000000001bcd000) (0MB)
[ 0.000000] EFI: mem38: type=3, attr=0xf, range=[0x0000000001bcd000-0x0000000001be8000) (0MB)
[ 0.000000] EFI: mem39: type=4, attr=0xf, range=[0x0000000001be8000-0x0000000001bf7000) (0MB)
[ 0.000000] EFI: mem40: type=3, attr=0xf, range=[0x0000000001bf7000-0x0000000001c0a000) (0MB)
[ 0.000000] EFI: mem41: type=4, attr=0xf, range=[0x0000000001c0a000-0x0000000001c0c000) (0MB)
[ 0.000000] EFI: mem42: type=3, attr=0xf, range=[0x0000000001c0c000-0x0000000001c0f000) (0MB)
[ 0.000000] EFI: mem43: type=4, attr=0xf, range=[0x0000000001c0f000-0x0000000001c10000) (0MB)
[ 0.000000] EFI: mem44: type=3, attr=0xf, range=[0x0000000001c10000-0x0000000001c16000) (0MB)
[ 0.000000] EFI: mem45: type=4, attr=0xf, range=[0x0000000001c16000-0x0000000001c17000) (0MB)
[ 0.000000] EFI: mem46: type=3, attr=0xf, range=[0x0000000001c17000-0x0000000001c24000) (0MB)
[ 0.000000] EFI: mem47: type=4, attr=0xf, range=[0x0000000001c24000-0x0000000001c28000) (0MB)
[ 0.000000] EFI: mem48: type=3, attr=0xf, range=[0x0000000001c28000-0x0000000001c2a000) (0MB)
[ 0.000000] EFI: mem49: type=4, attr=0xf, range=[0x0000000001c2a000-0x0000000001c2c000) (0MB)
[ 0.000000] EFI: mem50: type=3, attr=0xf, range=[0x0000000001c2c000-0x0000000001c2d000) (0MB)
[ 0.000000] EFI: mem51: type=4, attr=0xf, range=[0x0000000001c2d000-0x0000000001c35000) (0MB)
[ 0.000000] EFI: mem52: type=3, attr=0xf, range=[0x0000000001c35000-0x0000000001c4e000) (0MB)
[ 0.000000] EFI: mem53: type=4, attr=0xf, range=[0x0000000001c4e000-0x0000000001c51000) (0MB)
[ 0.000000] EFI: mem54: type=3, attr=0xf, range=[0x0000000001c51000-0x0000000001c59000) (0MB)
[ 0.000000] EFI: mem55: type=4, attr=0xf, range=[0x0000000001c59000-0x0000000001c60000) (0MB)
[ 0.000000] EFI: mem56: type=3, attr=0xf, range=[0x0000000001c60000-0x0000000001c67000) (0MB)
[ 0.000000] EFI: mem57: type=4, attr=0xf, range=[0x0000000001c67000-0x0000000001c7c000) (0MB)
[ 0.000000] EFI: mem58: type=3, attr=0xf, range=[0x0000000001c7c000-0x0000000001c87000) (0MB)
[ 0.000000] EFI: mem59: type=4, attr=0xf, range=[0x0000000001c87000-0x0000000001c89000) (0MB)
[ 0.000000] EFI: mem60: type=3, attr=0xf, range=[0x0000000001c89000-0x0000000001c90000) (0MB)
[ 0.000000] EFI: mem61: type=4, attr=0xf, range=[0x0000000001c90000-0x0000000001c91000) (0MB)
[ 0.000000] EFI: mem62: type=3, attr=0xf, range=[0x0000000001c91000-0x0000000001c95000) (0MB)
[ 0.000000] EFI: mem63: type=4, attr=0xf, range=[0x0000000001c95000-0x0000000001cb4000) (0MB)
[ 0.000000] EFI: mem64: type=3, attr=0xf, range=[0x0000000001cb4000-0x0000000001cb7000) (0MB)
[ 0.000000] EFI: mem65: type=4, attr=0xf, range=[0x0000000001cb7000-0x0000000001cbf000) (0MB)
[ 0.000000] EFI: mem66: type=3, attr=0xf, range=[0x0000000001cbf000-0x0000000001cc3000) (0MB)
[ 0.000000] EFI: mem67: type=4, attr=0xf, range=[0x0000000001cc3000-0x0000000001cd0000) (0MB)
[ 0.000000] EFI: mem68: type=3, attr=0xf, range=[0x0000000001cd0000-0x0000000001cd1000) (0MB)
[ 0.000000] EFI: mem69: type=4, attr=0xf, range=[0x0000000001cd1000-0x0000000001cd4000) (0MB)
[ 0.000000] EFI: mem70: type=3, attr=0xf, range=[0x0000000001cd4000-0x0000000001cdb000) (0MB)
[ 0.000000] EFI: mem71: type=4, attr=0xf, range=[0x0000000001cdb000-0x0000000001cdd000) (0MB)
[ 0.000000] EFI: mem72: type=3, attr=0xf, range=[0x0000000001cdd000-0x0000000001ce2000) (0MB)
[ 0.000000] EFI: mem73: type=4, attr=0xf, range=[0x0000000001ce2000-0x0000000001ce3000) (0MB)
[ 0.000000] EFI: mem74: type=3, attr=0xf, range=[0x0000000001ce3000-0x0000000001d38000) (0MB)
[ 0.000000] EFI: mem75: type=4, attr=0xf, range=[0x0000000001d38000-0x0000000001d44000) (0MB)
[ 0.000000] EFI: mem76: type=3, attr=0xf, range=[0x0000000001d44000-0x0000000001d45000) (0MB)
[ 0.000000] EFI: mem77: type=4, attr=0xf, range=[0x0000000001d45000-0x0000000001d46000) (0MB)
[ 0.000000] EFI: mem78: type=3, attr=0xf, range=[0x0000000001d46000-0x0000000001d49000) (0MB)
[ 0.000000] EFI: mem79: type=4, attr=0xf, range=[0x0000000001d49000-0x0000000001d51000) (0MB)
[ 0.000000] EFI: mem80: type=3, attr=0xf, range=[0x0000000001d51000-0x0000000001d55000) (0MB)
[ 0.000000] EFI: mem81: type=4, attr=0xf, range=[0x0000000001d55000-0x0000000001d57000) (0MB)
[ 0.000000] EFI: mem82: type=3, attr=0xf, range=[0x0000000001d57000-0x0000000001d59000) (0MB)
[ 0.000000] EFI: mem83: type=4, attr=0xf, range=[0x0000000001d59000-0x0000000001d6a000) (0MB)
[ 0.000000] EFI: mem84: type=3, attr=0xf, range=[0x0000000001d6a000-0x0000000001d6c000) (0MB)
[ 0.000000] EFI: mem85: type=4, attr=0xf, range=[0x0000000001d6c000-0x0000000001d6e000) (0MB)
[ 0.000000] EFI: mem86: type=3, attr=0xf, range=[0x0000000001d6e000-0x0000000001d70000) (0MB)
[ 0.000000] EFI: mem87: type=4, attr=0xf, range=[0x0000000001d70000-0x0000000001d71000) (0MB)
[ 0.000000] EFI: mem88: type=3, attr=0xf, range=[0x0000000001d71000-0x0000000001d72000) (0MB)
[ 0.000000] EFI: mem89: type=4, attr=0xf, range=[0x0000000001d72000-0x0000000001d77000) (0MB)
[ 0.000000] EFI: mem90: type=3, attr=0xf, range=[0x0000000001d77000-0x0000000001d7b000) (0MB)
[ 0.000000] EFI: mem91: type=4, attr=0xf, range=[0x0000000001d7b000-0x0000000002257000) (4MB)
[ 0.000000] EFI: mem92: type=3, attr=0xf, range=[0x0000000002257000-0x000000000225b000) (0MB)
[ 0.000000] EFI: mem93: type=4, attr=0xf, range=[0x000000000225b000-0x000000000225d000) (0MB)
[ 0.000000] EFI: mem94: type=3, attr=0xf, range=[0x000000000225d000-0x000000000225f000) (0MB)
[ 0.000000] EFI: mem95: type=4, attr=0xf, range=[0x000000000225f000-0x0000000002262000) (0MB)
[ 0.000000] EFI: mem96: type=3, attr=0xf, range=[0x0000000002262000-0x0000000002265000) (0MB)
[ 0.000000] EFI: mem97: type=4, attr=0xf, range=[0x0000000002265000-0x0000000002270000) (0MB)
[ 0.000000] EFI: mem98: type=3, attr=0xf, range=[0x0000000002270000-0x0000000002272000) (0MB)
[ 0.000000] EFI: mem99: type=4, attr=0xf, range=[0x0000000002272000-0x000000000227b000) (0MB)
[ 0.000000] EFI: mem100: type=3, attr=0xf, range=[0x000000000227b000-0x0000000002288000) (0MB)
[ 0.000000] EFI: mem101: type=4, attr=0xf, range=[0x0000000002288000-0x000000000228a000) (0MB)
[ 0.000000] EFI: mem102: type=3, attr=0xf, range=[0x000000000228a000-0x000000000228b000) (0MB)
[ 0.000000] EFI: mem103: type=4, attr=0xf, range=[0x000000000228b000-0x0000000002290000) (0MB)
[ 0.000000] EFI: mem104: type=3, attr=0xf, range=[0x0000000002290000-0x0000000002292000) (0MB)
[ 0.000000] EFI: mem105: type=4, attr=0xf, range=[0x0000000002292000-0x0000000002298000) (0MB)
[ 0.000000] EFI: mem106: type=3, attr=0xf, range=[0x0000000002298000-0x000000000229d000) (0MB)
[ 0.000000] EFI: mem107: type=4, attr=0xf, range=[0x000000000229d000-0x00000000022a5000) (0MB)
[ 0.000000] EFI: mem108: type=3, attr=0xf, range=[0x00000000022a5000-0x00000000022a9000) (0MB)
[ 0.000000] EFI: mem109: type=4, attr=0xf, range=[0x00000000022a9000-0x00000000022d5000) (0MB)
[ 0.000000] EFI: mem110: type=3, attr=0xf, range=[0x00000000022d5000-0x00000000022e6000) (0MB)
[ 0.000000] EFI: mem111: type=4, attr=0xf, range=[0x00000000022e6000-0x000000000258c000) (2MB)
[ 0.000000] EFI: mem112: type=3, attr=0xf, range=[0x000000000258c000-0x0000000002590000) (0MB)
[ 0.000000] EFI: mem113: type=4, attr=0xf, range=[0x0000000002590000-0x0000000002592000) (0MB)
[ 0.000000] EFI: mem114: type=3, attr=0xf, range=[0x0000000002592000-0x0000000002594000) (0MB)
[ 0.000000] EFI: mem115: type=4, attr=0xf, range=[0x0000000002594000-0x0000000002596000) (0MB)
[ 0.000000] EFI: mem116: type=3, attr=0xf, range=[0x0000000002596000-0x0000000002598000) (0MB)
[ 0.000000] EFI: mem117: type=4, attr=0xf, range=[0x0000000002598000-0x000000000275d000) (1MB)
[ 0.000000] EFI: mem118: type=3, attr=0xf, range=[0x000000000275d000-0x000000000276d000) (0MB)
[ 0.000000] EFI: mem119: type=4, attr=0xf, range=[0x000000000276d000-0x0000000002772000) (0MB)
[ 0.000000] EFI: mem120: type=3, attr=0xf, range=[0x0000000002772000-0x0000000002775000) (0MB)
[ 0.000000] EFI: mem121: type=4, attr=0xf, range=[0x0000000002775000-0x000000000277a000) (0MB)
[ 0.000000] EFI: mem122: type=3, attr=0xf, range=[0x000000000277a000-0x000000000277c000) (0MB)
[ 0.000000] EFI: mem123: type=4, attr=0xf, range=[0x000000000277c000-0x0000000002780000) (0MB)
[ 0.000000] EFI: mem124: type=7, attr=0xf, range=[0x0000000002780000-0x0000000002781000) (0MB)
[ 0.000000] EFI: mem125: type=3, attr=0xf, range=[0x0000000002781000-0x0000000002783000) (0MB)
[ 0.000000] EFI: mem126: type=7, attr=0xf, range=[0x0000000002783000-0x0000000002787000) (0MB)
[ 0.000000] EFI: mem127: type=4, attr=0xf, range=[0x0000000002787000-0x000000000278b000) (0MB)
[ 0.000000] EFI: mem128: type=7, attr=0xf, range=[0x000000000278b000-0x000000000279c000) (0MB)
[ 0.000000] EFI: mem129: type=4, attr=0xf, range=[0x000000000279c000-0x0000000002840000) (0MB)
[ 0.000000] EFI: mem130: type=7, attr=0xf, range=[0x0000000002840000-0x000000000285a000) (0MB)
[ 0.000000] EFI: mem131: type=4, attr=0xf, range=[0x000000000285a000-0x0000000002b12000) (2MB)
[ 0.000000] EFI: mem132: type=7, attr=0xf, range=[0x0000000002b12000-0x0000000002b2c000) (0MB)
[ 0.000000] EFI: mem133: type=4, attr=0xf, range=[0x0000000002b2c000-0x0000000002ba3000) (0MB)
[ 0.000000] EFI: mem134: type=7, attr=0xf, range=[0x0000000002ba3000-0x0000000002bbe000) (0MB)
[ 0.000000] EFI: mem135: type=4, attr=0xf, range=[0x0000000002bbe000-0x0000000002bd9000) (0MB)
[ 0.000000] EFI: mem136: type=7, attr=0xf, range=[0x0000000002bd9000-0x0000000002caa000) (0MB)
[ 0.000000] EFI: mem137: type=1, attr=0xf, range=[0x0000000002caa000-0x0000000002d7b000) (0MB)
[ 0.000000] EFI: mem138: type=7, attr=0xf, range=[0x0000000002d7b000-0x000000002d6c0000) (681MB)
[ 0.000000] EFI: mem139: type=2, attr=0xf, range=[0x000000002d6c0000-0x0000000032b58000) (84MB)
[ 0.000000] EFI: mem140: type=7, attr=0xf, range=[0x0000000032b58000-0x000000008fccf000) (1489MB)
[ 0.000000] EFI: mem141: type=2, attr=0xf, range=[0x000000008fccf000-0x00000000bf1fc000) (757MB)
[ 0.000000] EFI: mem142: type=10, attr=0xf, range=[0x00000000bf1fc000-0x00000000bf245000) (0MB)
[ 0.000000] EFI: mem143: type=9, attr=0xf, range=[0x00000000bf245000-0x00000000bf24e000) (0MB)
[ 0.000000] EFI: mem144: type=6, attr=0x800000000000000f, range=[0x00000000bf24e000-0x00000000bf302000) (0MB)
[ 0.000000] EFI: mem145: type=10, attr=0xf, range=[0x00000000bf302000-0x00000000bf305000) (0MB)
[ 0.000000] EFI: mem146: type=7, attr=0xf, range=[0x00000000bf305000-0x00000000bf306000) (0MB)
[ 0.000000] EFI: mem147: type=6, attr=0x800000000000000f, range=[0x00000000bf306000-0x00000000bf30a000) (0MB)
[ 0.000000] EFI: mem148: type=0, attr=0xf, range=[0x00000000bf30a000-0x00000000bf551000) (2MB)
[ 0.000000] EFI: mem149: type=5, attr=0x800000000000000f, range=[0x00000000bf551000-0x00000000bf55d000) (0MB)
[ 0.000000] EFI: mem150: type=0, attr=0xf, range=[0x00000000bf55d000-0x00000000bf560000) (0MB)
[ 0.000000] EFI: mem151: type=6, attr=0x800000000000000f, range=[0x00000000bf560000-0x00000000bf561000) (0MB)
[ 0.000000] EFI: mem152: type=7, attr=0xf, range=[0x00000000bf561000-0x00000000bf562000) (0MB)
[ 0.000000] EFI: mem153: type=5, attr=0x800000000000000f, range=[0x00000000bf562000-0x00000000bf563000) (0MB)
[ 0.000000] EFI: mem154: type=0, attr=0xf, range=[0x00000000bf563000-0x00000000bf573000) (0MB)
[ 0.000000] EFI: mem155: type=10, attr=0xf, range=[0x00000000bf573000-0x00000000bf57b000) (0MB)
[ 0.000000] EFI: mem156: type=5, attr=0x800000000000000f, range=[0x00000000bf57b000-0x00000000bf580000) (0MB)
[ 0.000000] EFI: mem157: type=6, attr=0x800000000000000f, range=[0x00000000bf580000-0x00000000bf592000) (0MB)
[ 0.000000] EFI: mem158: type=5, attr=0x800000000000000f, range=[0x00000000bf592000-0x00000000bf5a2000) (0MB)
[ 0.000000] EFI: mem159: type=6, attr=0x800000000000000f, range=[0x00000000bf5a2000-0x00000000bf5a5000) (0MB)
[ 0.000000] EFI: mem160: type=10, attr=0xf, range=[0x00000000bf5a5000-0x00000000bf7a8000) (2MB)
[ 0.000000] EFI: mem161: type=4, attr=0xf, range=[0x00000000bf7a8000-0x00000000bf8e7000) (1MB)
[ 0.000000] EFI: mem162: type=3, attr=0xf, range=[0x00000000bf8e7000-0x00000000bfb65000) (2MB)
[ 0.000000] EFI: mem163: type=4, attr=0xf, range=[0x00000000bfb65000-0x00000000bfb70000) (0MB)
[ 0.000000] EFI: mem164: type=3, attr=0xf, range=[0x00000000bfb70000-0x00000000bfb72000) (0MB)
[ 0.000000] EFI: mem165: type=6, attr=0x800000000000000f, range=[0x00000000bfb72000-0x00000000bfef4000) (3MB)
[ 0.000000] EFI: mem166: type=4, attr=0xf, range=[0x00000000bfef4000-0x00000000bff00000) (0MB)
[ 0.000000] EFI: mem167: type=7, attr=0xf, range=[0x0000000100001000-0x000000041f000000) (12783MB)
[ 0.000000] EFI: mem168: type=11, attr=0x8000000000000001, range=[0x00000000e0000000-0x00000000f0000000) (256MB)
[ 0.000000] EFI: mem169: type=11, attr=0x8000000000000001, range=[0x00000000fec00000-0x00000000fec01000) (0MB)
[ 0.000000] EFI: mem170: type=11, attr=0x8000000000000001, range=[0x00000000fec10000-0x00000000fec11000) (0MB)
[ 0.000000] EFI: mem171: type=11, attr=0x8000000000000001, range=[0x00000000fed00000-0x00000000fed01000) (0MB)
[ 0.000000] EFI: mem172: type=11, attr=0x8000000000000001, range=[0x00000000fed40000-0x00000000fed45000) (0MB)
[ 0.000000] EFI: mem173: type=11, attr=0x8000000000000001, range=[0x00000000fed61000-0x00000000fed71000) (0MB)
[ 0.000000] EFI: mem174: type=11, attr=0x8000000000000001, range=[0x00000000fed80000-0x00000000fed90000) (0MB)
[ 0.000000] EFI: mem175: type=11, attr=0x8000000000000001, range=[0x00000000ff000000-0x0000000100000000) (16MB)
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vm64 ro add_efi_memmap none=UEFI_ARCH_x86_64 radeon.modeset=0
[ 12.642285] efifb: probing for efifb
[ 12.642575] efifb: framebuffer at 0xc0000000, mapped to 0xffffc90023700000, using 1920k, total 1920k
[ 12.642577] efifb: mode is 800x600x32, linelength=3200, pages=1
[ 12.642579] efifb: scrolling: redraw
[ 12.642581] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 12.645422] fb0: EFI VGA frame buffer device
[ 13.543402] Refined TSC clocksource calibration: 2595.278 MHz.

Catalyst won't install also floppy not mounted with 2008.04 new ISOs

For some reason or another the latest realeased Iso after (Don't Panic) the one that came out recently 2008.04 in May I cannot set up my floppy even though I identitfied it right and catalyst won't install I did pacman -Syu to install the files it required but it wouldn't complete the transaction due to some conflicting files. I'll show you what I mean.
This is my floppy line in fstab that was right on in the Don't Panic release:
/dev/fd0 /media/floppy vfat defaults,user,noauto,unhide 0 0
This is what happens under new realease
[krazybastid@krazy89709874976 ~]$ mount /media/floppy
mount: special device /dev/fd0 does not exist
[krazybastid@krazy89709874976 ~]$
So I try to install catalyst:
[krazybastid@krazy89709874976 ~]$ sudo pacman -S catalyst
resolving dependencies...
looking for inter-conflicts...
:: catalyst-utils conflicts with libgl. Remove libgl? [Y/n] y
error: failed to prepare transaction (could not satisfy dependencies)
:: atl2: requires kernel26<2.6.25
:: ipw3945: requires kernel26<=2.6.25-0
:: madwifi: requires kernel26<=2.6.25-0
:: ndiswrapper: requires kernel26<=2.6.25-0
:: rt2500: requires kernel26<=2.6.25-0
:: tiacx: requires kernel26<2.6.25
:: wlan-ng26: requires kernel26<=2.6.25-0
[krazybastid@krazy89709874976 ~]$
So I try pacman -Syu
[krazybastid@krazy89709874976 ~]$ sudo pacman -Syu
:: Synchronizing package databases...
core is up to date
extra is up to date
community is up to date
:: Starting full system upgrade...
resolving dependencies...
looking for inter-conflicts...
Targets: rsync-3.0.2-1 abs-2.1-1 pam-1.0.1-1 coreutils-6.11-1
mkinitcpio-0.5.19-1 kernel26-2.6.25.4-1 atl2-2.0.4-3 m4-1.4.11-1
autoconf-2.62-1 bzip2-1.0.5-2 dialog-1.1_20080316-3 file-4.24-1
gpm-1.20.3-1 initscripts-2008.05-1 ipw3945-1.2.2-10
run-parts-2.28.6-2 ca-certificates-20080514-3 openssl-0.9.8h-3
libldap-2.3.40-1 libtool-2.2.4-1 licenses-2.4-1 links-2.1pre36-1
lvm2-2.02.36-1 madwifi-0.9.4.3382-5 ndiswrapper-1.52-4
openssh-5.0p1-1 pango-1.20.3-1 patch-2.5.9-1 pcre-7.7-1
pkgconfig-0.23-1 rt2500-1.1.0_B4-23 syslog-ng-2.0.9-1 tar-1.20-2
texinfo-4.12-2 tiacx-20080210-5 wget-1.11.2-1 wlan-ng26-0.2.8-17
Total Download Size: 0.00 MB
Total Installed Size: 115.06 MB
Proceed with installation? [Y/n] y
checking package integrity...
(37/37) checking for file conflicts [#####################] 100%
error: could not prepare transaction
error: failed to commit transaction (conflicting files)
gpm: /usr/lib/libgpm.so.1 exists in filesystem
Errors occurred, no packages were upgraded.
[krazybastid@krazy89709874976 ~]$
Well I'm stuck is there a way out of this cause I can't even use the (Don't Panic) CD now without running into more update problems.

Greetings. While trying to upgrade I got the following error
$sudo pacman -Syuf
:: Synchronizing package databases...
core is up to date
extra is up to date
community is up to date
:: Starting full system upgrade...
resolving dependencies...
looking for inter-conflicts...
error: failed to prepare transaction (could not satisfy dependencies)
:: ipw3945: requires kernel26<=2.6.25-0
pl help.
Note: with lspci | grep Wireless I noted that my wireless is intel PRO 2200 chip set. and in the modules ipw2200 was there for loading. I could not figure out why ipw3945 hinters the upgrade problem. I removed ipw3945 with sudo pacman --remove ipw3945 and removed the ignorepkg in rc.conf. made a try with pacman -Syu for a system upgrade operation.
After a completion of about 360 MB of updates down load it failed to update the system. It is late night. I decided to give a try with yaourt. This time with yaourt -Syf sytem got updated.
Last edited by kgas (2008-11-11 23:21:59)

Where to D/L latest img Linux source code tree (2.6.27.29)

I want to include a specific driver in my initrd, but in order to do so, I must first compile it using the proper kernel. I'm trying to find the kernel files (rpm I guess?) for the kernel used by the latest imaging ISO (2.6.27.29-0.1-default) but I can't find them anywhere.
The doc for updating initrd in ZDM7 (Novell Documentation) gives a link to "linux-2.6.16.46-0.12-pulsar.tgz Linux source code tree file", which is outdated by now. I did find this: NOVELL: Downloads - Linux kernel 20090817 , but I'm not sure it's the right thing and unlike the previous link, apparently you need special permissions to download this one.
Any idea where to find the latest files?

stubie,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://support.novell.com/forums/

GRUB error message 15 after installation[SOLVED]

during my installation from a live cd (on disk..not net install) I installed GRUB onto the mbr. I am dual booting with Windows Vista and thankfully it boots up from the GRUB menu. When I try to boot arch linux I get an error 15.
I've tried to install GRUB onto my arch root partition (/dev/sda3) using chroot but I can't seem to get those much needed files in order for arch to boot up properly. I am not sure whether or not GRUB was put onto the Windows partition or not.
This is basically what I did to try to fix the problem unsuccessfully:
grub root (hd0,2)
grub setup (hd0,2)
grub quit
#reboot
I looked at my /boot/grub/menu.lst and put root=UUID=<partition UUID for sda3> for both my fallback and regular arch.
Any help on this confusing issue would be much appreciated.
Last edited by rg_arc (2011-08-15 21:02:50)

Inxsible wrote:
DaemonOfChaos wrote:
PSW wrote:Is there a way to change the Arch Installer to compensate for this?
Definitely have to second this one.
I just completed a fresh net install and encountered this error. I spent more time correcting this issue than the install took.
It also does not provide for a good impression when a system cannot boot up after a fresh install.
There are releng isos available at http://releng.archlinux.org
These are very latest isos generated every couple of days, so you are guaranteed to be updated (almost). Use them, report bugs, so that they get fixed and then they will be released as official versions.
Unfortunately, every one complains about the official iso not working, but no one is willing to test the releng isos to help out the devs. I do understand the due the rolling release nature of Arch, its tedious to have to test installation isos, once you have completed the installation -- but no gain without some pain.
I will give those a try as I am happy to help test. Since I have a system I can play with a failure won't be an issue.
I have been using Ubuntu / Linux Mint and thought I would give Arch a try. I do understand your point of view but on the flip-side (devil's advocate perhaps?) an "official ISO" should always work. Otherwise what is the point of it being official?

[SOLVED] UDEV Failed at boot

hey all,
I'm having an issue with udev at boot failing and although I can get to the login prompt and login a whole load of hardware is undetected including network graphics and sound. I am able the start udevd without any apparant issue once logged in but unfortunatley I'm not all that clued up on how to find and load driver short of loading modules I've been told to for reasons X,Y and Z.
I am having to use a live disc to get online and send this post and pull log data from my system.
things I've tried include re-installing udev, kmod and the kernel plus reading alot on udev and how it is ment to work (starting to get major eye strain now)
here is a paste of my boot log
http://pastebin.com/K5L3pbm1
my messages.log
http://pastebin.com/qzEziaxY
and finally my dmesg log
http://pastebin.com/F4aSdfKe
I'm not sure which of these logs will be useful but if any more information is need let me know...
and Thank You in advance.
Last edited by balasarius (2012-05-17 20:33:10)

And it helped me too....but leaves me curious as to why the initscripts are not updating ?
Medium length story: I had to upgrade to current using the official iso (current release) dated last fall.
I tried c couple of recent releng isos and they failed to mount my usb partition as the targets. This was
also the case for the latest archbang iso as well. i.e. To do an install to a usb stick I had to use the old core.
All of that, albeit time comsuming, was more or less something I could plod along with on my own. The failure
of the dep-chain to pick-up on installing the latest initscripts was surprising as it required that I find the information
in this email thread.

GDM 3.6 wont start

I installed a brand new system two days ago, from the latest Arch ISO. I'm using Xorg 1.11 and Catalyst 12.6 from the official xorg111/hd234k repos. My DE is Gnome Shell 3.6.1. Arch is dual booted alongside Windows 8 (sda1/2 for Win8, sda3/4 for Arch, no Swap). The hardware is a AMD Phenome II x4 920, ATi HD Radeon 4870 512mb, and 8Gb of ram.
This is the first time I've tried to use both systemd and grub2. But so far all the help I've been able to get from the IRC has lead to dead-ends. As far as I know, I've read the docs very thoroughly and set everything up correctly, and everything does work perfectly except for GDM. Meaning if I put "exec gnome-session" in ~/.xinitrc and '$ startx' then Gnome Shell starts up and runs fine (though keyring doesn't remember my passwords).
Yes, I have set "nomodeset" in /etc/default/grub and generated Grub2 correctly
Yes, I have set up systemd correctly (hostname, locale, timezone, hwclock, kernel modules, etc). Like I said, everything works great in Gnome-Shell.
Yes, I have run "systemd enable gdm", but gdm fails to load, and while no error message display at boot (it just sits there after the "systemd-fsdisk : clean ... " message), disabling GDM then running it manually ("# gdm") says that Xorg failed to load, and to check the Xorg logs.
Well I've checked the Xorg logs, and the errors present don't return any useful results on Google... so I'm posting here in hope this isn't just some odd bug with my system specifically. The logs are as follows:
Log: /var/log/Xorg.log.old (this is the one generated [i believe] from running '# gdm')
[ 25.921]
X.Org X Server 1.11.4
Release Date: 2012-01-27
[ 25.924] X Protocol Version 11, Revision 0
[ 25.925] Build Operating System: Linux 3.3.7-1-ARCH x86_64
[ 25.926] Current Operating System: Linux philip-linux 3.6.4-1-ARCH #1 SMP PREEMPT Mon Oct 29 09:49:00 CET 2012 x86_64
[ 25.927] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=cc87c822-7ff7-43c0-9d61-4770c2e40d0c ro nomodeset quiet
[ 25.928] Build Date: 01 June 2012 05:44:06PM
[ 25.929]
[ 25.930] Current version of pixman: 0.26.2
[ 25.931] Before reporting problems, check [url]http://wiki.x.org[/url]
to make sure that you have the latest version.
[ 25.934] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 25.938] (==) Log file: "/var/log/Xorg.0.log", Time: Thu Nov 1 21:11:33 2012
[ 25.999] (==) Using config file: "/etc/X11/xorg.conf"
[ 26.001] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 26.022] (==) ServerLayout "aticonfig Layout"
[ 26.022] (**) |-->Screen "aticonfig-Screen[0]-0" (0)
[ 26.022] (**) | |-->Monitor "<default monitor>"
[ 26.023] (**) | |-->Device "aticonfig-Device[0]-0"
[ 26.023] (==) No monitor specified for screen "aticonfig-Screen[0]-0".
Using a default monitor configuration.
[ 26.023] (==) Automatically adding devices
[ 26.023] (==) Automatically enabling devices
[ 26.136] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 26.136] Entry deleted from font path.
[ 26.138] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 26.138] Entry deleted from font path.
[ 26.138] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 26.138] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 26.138] Entry deleted from font path.
[ 26.138] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 26.138] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/Type1/
[ 26.138] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 26.138] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 26.138] (II) Loader magic: 0x7c7ae0
[ 26.138] (II) Module ABI versions:
[ 26.138] X.Org ANSI C Emulation: 0.4
[ 26.138] X.Org Video Driver: 11.0
[ 26.138] X.Org XInput driver : 13.0
[ 26.138] X.Org Server Extension : 6.0
[ 26.140] (--) PCI:*(0:1:0:0) 1002:9440:1043:01fc rev 0, Mem @ 0xd0000000/268435456, 0xfbef0000/65536, I/O @ 0x0000d000/256, BIOS @ 0x????????/131072
[ 26.140] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 26.140] (II) "extmod" will be loaded by default.
[ 26.140] (II) "dbe" will be loaded by default.
[ 26.140] (II) "glx" will be loaded by default.
[ 26.140] (II) "record" will be loaded by default.
[ 26.140] (II) "dri" will be loaded by default.
[ 26.140] (II) "dri2" will be loaded by default.
[ 26.140] (II) LoadModule: "extmod"
[ 26.156] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 26.168] (II) Module extmod: vendor="X.Org Foundation"
[ 26.168] compiled for 1.11.4, module version = 1.0.0
[ 26.168] Module class: X.Org Server Extension
[ 26.168] ABI class: X.Org Server Extension, version 6.0
[ 26.168] (II) Loading extension MIT-SCREEN-SAVER
[ 26.168] (II) Loading extension XFree86-VidModeExtension
[ 26.168] (II) Loading extension XFree86-DGA
[ 26.168] (II) Loading extension DPMS
[ 26.168] (II) Loading extension XVideo
[ 26.168] (II) Loading extension XVideo-MotionCompensation
[ 26.168] (II) Loading extension X-Resource
[ 26.168] (II) LoadModule: "dbe"
[ 26.169] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 26.175] (II) Module dbe: vendor="X.Org Foundation"
[ 26.175] compiled for 1.11.4, module version = 1.0.0
[ 26.175] Module class: X.Org Server Extension
[ 26.175] ABI class: X.Org Server Extension, version 6.0
[ 26.175] (II) Loading extension DOUBLE-BUFFER
[ 26.175] (II) LoadModule: "glx"
[ 26.176] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 26.190] (II) Module glx: vendor="Advanced Micro Devices, Inc."
[ 26.191] compiled for 6.9.0, module version = 1.0.0
[ 26.191] (II) Loading extension GLX
[ 26.191] (II) LoadModule: "record"
[ 26.191] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 26.198] (II) Module record: vendor="X.Org Foundation"
[ 26.198] compiled for 1.11.4, module version = 1.13.0
[ 26.198] Module class: X.Org Server Extension
[ 26.198] ABI class: X.Org Server Extension, version 6.0
[ 26.198] (II) Loading extension RECORD
[ 26.198] (II) LoadModule: "dri"
[ 26.198] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 26.201] (II) Module dri: vendor="X.Org Foundation"
[ 26.201] compiled for 1.11.4, module version = 1.0.0
[ 26.201] ABI class: X.Org Server Extension, version 6.0
[ 26.201] (II) Loading extension XFree86-DRI
[ 26.201] (II) LoadModule: "dri2"
[ 26.201] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 26.202] (II) Module dri2: vendor="X.Org Foundation"
[ 26.202] compiled for 1.11.4, module version = 1.2.0
[ 26.202] ABI class: X.Org Server Extension, version 6.0
[ 26.202] (II) Loading extension DRI2
[ 26.202] (II) LoadModule: "fglrx"
[ 26.210] (II) Loading /usr/lib/xorg/modules/drivers/fglrx_drv.so
[ 26.441] (II) Module fglrx: vendor="FireGL - ATI Technologies Inc."
[ 26.455] compiled for 1.4.99.906, module version = 8.97.2
[ 26.455] Module class: X.Org Video Driver
[ 26.456] (II) Loading sub module "fglrxdrm"
[ 26.456] (II) LoadModule: "fglrxdrm"
[ 26.456] (II) Loading /usr/lib/xorg/modules/linux/libfglrxdrm.so
[ 26.466] (II) Module fglrxdrm: vendor="FireGL - ATI Technologies Inc."
[ 26.466] compiled for 1.4.99.906, module version = 8.97.2
[ 26.466] (II) ATI Proprietary Linux Driver Version Identifier:8.97.2
[ 26.466] (II) ATI Proprietary Linux Driver Release Identifier: UNSUPPORTED-8.97.100.3
[ 26.466] (II) ATI Proprietary Linux Driver Build Date: Jul 3 2012 23:56:30
[ 26.466] (++) using VT number 1
[ 26.467] (WW) Falling back to old probe method for fglrx
[ 26.506] (II) Loading PCS database from /etc/ati/amdpcsdb
[ 26.520] (--) Chipset Supported AMD Graphics Processor (0x9440) found
[ 26.527] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:17:0) found
[ 26.527] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:18:0) found
[ 26.527] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:18:1) found
[ 26.527] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:18:2) found
[ 26.527] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:19:0) found
[ 26.527] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:19:1) found
[ 26.527] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:19:2) found
[ 26.527] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:0) found
[ 26.527] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:1) found
[ 26.527] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:2) found
[ 26.527] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:3) found
[ 26.527] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:4) found
[ 26.528] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:5) found
[ 26.528] (WW) fglrx: No matching Device section for instance (BusID PCI:0@1:0:1) found
[ 26.528] (II) AMD Video driver is running on a device belonging to a group targeted for this release
[ 26.539] (II) AMD Video driver is signed
[ 26.539] (II) Loading /usr/lib/xorg/modules/drivers/fglrx_drv.so
[ 26.539] (II) Loading /usr/lib/xorg/modules/linux/libfglrxdrm.so
[ 26.539] (II) fglrx(0): pEnt->device->identifier=0xaebed0
[ 26.540] (II) fglrx(0): === [xdl_xs111_atiddxPreInit] === begin
[ 26.540] (II) Loading sub module "vgahw"
[ 26.540] (II) LoadModule: "vgahw"
[ 26.540] (II) Loading /usr/lib/xorg/modules/libvgahw.so
[ 26.541] (II) Module vgahw: vendor="X.Org Foundation"
[ 26.541] compiled for 1.11.4, module version = 0.1.0
[ 26.541] ABI class: X.Org Video Driver, version 11.0
[ 26.541] (**) fglrx(0): Depth 24, (--) framebuffer bpp 32
[ 26.541] (II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
[ 26.541] (==) fglrx(0): Default visual is TrueColor
[ 26.541] (==) fglrx(0): RGB weight 888
[ 26.541] (II) fglrx(0): Using 8 bits per RGB
[ 26.541] (==) fglrx(0): Buffer Tiling is ON
[ 26.542] (II) Loading sub module "fglrxdrm"
[ 26.542] (II) LoadModule: "fglrxdrm"
[ 26.543] (II) Loading /usr/lib/xorg/modules/linux/libfglrxdrm.so
[ 26.543] (II) Module fglrxdrm: vendor="FireGL - ATI Technologies Inc."
[ 26.543] compiled for 1.4.99.906, module version = 8.97.2
[ 26.546] ukiDynamicMajor: found major device number 251
[ 26.546] ukiDynamicMajor: found major device number 251
[ 26.546] ukiOpenByBusid: Searching for BusID PCI:1:0:0
[ 26.546] ukiOpenDevice: node name is /dev/ati/card0
[ 26.546] ukiOpenDevice: open result is 11, (OK)
[ 26.546] ukiOpenByBusid: ukiOpenMinor returns 11
[ 26.546] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
[ 26.546] (**) fglrx(0): NoAccel = NO
[ 26.546] (**) fglrx(0): ATI 2D Acceleration Architecture enabled
[ 26.546] (--) fglrx(0): Chipset: "ATI Radeon HD 4800 Series " (Chipset = 0x9440)
[ 26.546] (--) fglrx(0): (PciSubVendor = 0x1043, PciSubDevice = 0x01fc)
[ 26.546] (==) fglrx(0): board vendor info: third party graphics adapter - NOT original ATI
[ 26.546] (--) fglrx(0): Linear framebuffer (phys) at 0xd0000000
[ 26.546] (--) fglrx(0): MMIO registers at 0xfbef0000
[ 26.546] (--) fglrx(0): I/O port at 0x0000d000
[ 26.546] (==) fglrx(0): ROM-BIOS at 0x000c0000
[ 26.564] (II) fglrx(0): AC Adapter is used
[ 26.589] (II) fglrx(0): Primary V_BIOS segment is: 0xc000
[ 26.591] (II) Loading sub module "vbe"
[ 26.591] (II) LoadModule: "vbe"
[ 26.592] (II) Loading /usr/lib/xorg/modules/libvbe.so
[ 26.593] (II) Module vbe: vendor="X.Org Foundation"
[ 26.593] compiled for 1.11.4, module version = 1.1.0
[ 26.593] ABI class: X.Org Video Driver, version 11.0
[ 26.593] (II) fglrx(0): VESA BIOS detected
[ 26.593] (II) fglrx(0): VESA VBE Version 3.0
[ 26.593] (II) fglrx(0): VESA VBE Total Mem: 16384 kB
[ 26.593] (II) fglrx(0): VESA VBE OEM: ATI ATOMBIOS
[ 26.593] (II) fglrx(0): VESA VBE OEM Software Rev: 11.7
[ 26.593] (II) fglrx(0): VESA VBE OEM Vendor: (C) 1988-2005, ATI Technologies Inc.
[ 26.593] (II) fglrx(0): VESA VBE OEM Product: RV770
[ 26.593] (II) fglrx(0): VESA VBE OEM Product Rev: 01.00
[ 26.631] (II) fglrx(0): ATI Video BIOS revision 9 or later detected
[ 26.632] (--) fglrx(0): Video RAM: 524288 kByte, Type: GDDR5
[ 26.632] (II) fglrx(0): PCIE card detected
[ 26.632] (--) fglrx(0): Using per-process page tables (PPPT) as GART.
[ 26.632] (WW) fglrx(0): board is an unknown third party board, chipset is supported
[ 26.633] (II) fglrx(0): Using adapter: 1:0.0.
[ 26.665] (II) fglrx(0): [FB] MC range(MCFBBase = 0xf00000000, MCFBSize = 0x20000000)
[ 26.672] (II) fglrx(0): Interrupt handler installed at IRQ 44.
[ 26.672] (II) fglrx(0): RandR 1.2 support is enabled!
[ 26.672] (II) fglrx(0): RandR 1.2 rotation support is enabled!
[ 26.672] (==) fglrx(0): Center Mode is disabled
[ 26.672] (II) Loading sub module "fb"
[ 26.672] (II) LoadModule: "fb"
[ 26.672] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 26.685] (II) Module fb: vendor="X.Org Foundation"
[ 26.685] compiled for 1.11.4, module version = 1.0.0
[ 26.685] ABI class: X.Org ANSI C Emulation, version 0.4
[ 26.685] (II) Loading sub module "ddc"
[ 26.685] (II) LoadModule: "ddc"
[ 26.685] (II) Module "ddc" already built-in
[ 27.457] (II) fglrx(0): Finished Initialize PPLIB!
[ 27.479] (II) fglrx(0): Output DFP1 using monitor section 0-DFP1
[ 27.479] (**) fglrx(0): Option "PreferredMode" "1920x1080"
[ 27.479] (**) fglrx(0): Option "Position" "0 0"
[ 27.479] (**) fglrx(0): Option "Disable" "false"
[ 27.479] (**) fglrx(0): Option "Rotate" "normal"
[ 27.479] (**) fglrx(0): Option "TargetRefresh" "60"
[ 27.479] (II) fglrx(0): Output DFP2 using monitor section 0-DFP2
[ 27.479] (**) fglrx(0): Option "Position" "331 1080"
[ 27.479] (**) fglrx(0): Option "Disable" "true"
[ 27.479] (**) fglrx(0): Option "Rotate" "normal"
[ 27.479] (**) fglrx(0): Option "TargetRefresh" "60"
[ 27.479] (II) fglrx(0): Output CRT1 has no monitor section
[ 27.479] (II) fglrx(0): Output CRT2 has no monitor section
[ 27.479] (II) fglrx(0): Output TV has no monitor section
[ 27.479] (II) fglrx(0): Output CV has no monitor section
[ 27.479] (II) Loading sub module "ddc"
[ 27.479] (II) LoadModule: "ddc"
[ 27.479] (II) Module "ddc" already built-in
[ 27.479] (II) fglrx(0): Connected Display0: DFP1
[ 27.479] (II) fglrx(0): Display0 EDID data ---------------------------
[ 27.479] (II) fglrx(0): Manufacturer: ACR Model: 87 Serial#: 2435877271
[ 27.479] (II) fglrx(0): Year: 2009 Week: 13
[ 27.479] (II) fglrx(0): EDID Version: 1.3
[ 27.479] (II) fglrx(0): Digital Display Input
[ 27.479] (II) fglrx(0): Max Image Size [cm]: horiz.: 48 vert.: 27
[ 27.479] (II) fglrx(0): Gamma: 2.20
[ 27.479] (II) fglrx(0): DPMS capabilities: StandBy Suspend
[ 27.479] (II) fglrx(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 27.479] (II) fglrx(0): First detailed timing is preferred mode
[ 27.479] (II) fglrx(0): redX: 0.640 redY: 0.330 greenX: 0.300 greenY: 0.600
[ 27.479] (II) fglrx(0): blueX: 0.150 blueY: 0.060 whiteX: 0.313 whiteY: 0.329
[ 27.479] (II) fglrx(0): Supported established timings:
[ 27.479] (II) fglrx(0): 720x400@70Hz
[ 27.479] (II) fglrx(0): 640x480@60Hz
[ 27.479] (II) fglrx(0): 640x480@67Hz
[ 27.479] (II) fglrx(0): 640x480@72Hz
[ 27.479] (II) fglrx(0): 640x480@75Hz
[ 27.479] (II) fglrx(0): 800x600@56Hz
[ 27.479] (II) fglrx(0): 800x600@60Hz
[ 27.479] (II) fglrx(0): 800x600@72Hz
[ 27.479] (II) fglrx(0): 800x600@75Hz
[ 27.479] (II) fglrx(0): 832x624@75Hz
[ 27.479] (II) fglrx(0): 1024x768@60Hz
[ 27.479] (II) fglrx(0): 1024x768@70Hz
[ 27.479] (II) fglrx(0): 1024x768@75Hz
[ 27.479] (II) fglrx(0): 1280x1024@75Hz
[ 27.479] (II) fglrx(0): 1152x864@75Hz
[ 27.479] (II) fglrx(0): Manufacturer's mask: 0
[ 27.479] (II) fglrx(0): Supported standard timings:
[ 27.479] (II) fglrx(0): #0: hsize: 1152 vsize 864 refresh: 75 vid: 20337
[ 27.479] (II) fglrx(0): #1: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
[ 27.479] (II) fglrx(0): #2: hsize: 1680 vsize 1050 refresh: 60 vid: 179
[ 27.479] (II) fglrx(0): #3: hsize: 1920 vsize 1080 refresh: 60 vid: 49361
[ 27.479] (II) fglrx(0): #4: hsize: 1440 vsize 900 refresh: 60 vid: 149
[ 27.479] (II) fglrx(0): #5: hsize: 1600 vsize 1200 refresh: 60 vid: 16553
[ 27.479] (II) fglrx(0): #6: hsize: 1280 vsize 960 refresh: 60 vid: 16513
[ 27.479] (II) fglrx(0): #7: hsize: 1280 vsize 720 refresh: 60 vid: 49281
[ 27.479] (II) fglrx(0): Supported detailed timing:
[ 27.479] (II) fglrx(0): clock: 138.5 MHz Image Size: 531 x 299 mm
[ 27.479] (II) fglrx(0): h_active: 1920 h_sync: 1968 h_sync_end 2000 h_blank_end 2080 h_border: 0
[ 27.479] (II) fglrx(0): v_active: 1080 v_sync: 1083 v_sync_end 1088 v_blanking: 1110 v_border: 0
[ 27.479] (II) fglrx(0): Ranges: V min: 56 V max: 76 Hz, H min: 31 H max: 83 kHz, PixClock max 175 MHz
[ 27.479] (II) fglrx(0): Monitor name: H213H
[ 27.479] (II) fglrx(0): Serial No: LF80D0028500
[ 27.479] (II) fglrx(0): EDID (in hex):
[ 27.479] (II) fglrx(0): 00ffffffffffff000472870097893091
[ 27.479] (II) fglrx(0): 0d13010380301b78caee95a3544c9926
[ 27.479] (II) fglrx(0): 0f5054bfef80714f8180b300d1c09500
[ 27.479] (II) fglrx(0): a940814081c01a3680a070381e403020
[ 27.479] (II) fglrx(0): 3500132b21000018000000fd00384c1f
[ 27.479] (II) fglrx(0): 5311000a202020202020000000fc0048
[ 27.479] (II) fglrx(0): 323133480a20202020202020000000ff
[ 27.479] (II) fglrx(0): 004c46383044303032383530300a001a
[ 27.479] (II) fglrx(0): End of Display0 EDID data --------------------
[ 27.479] (II) fglrx(0): Connected Display1: DFP2
[ 27.479] (II) fglrx(0): Display1 EDID data ---------------------------
[ 27.479] (II) fglrx(0): Manufacturer: WAC Model: 1019 Serial#: 5284
[ 27.479] (II) fglrx(0): Year: 2008 Week: 5
[ 27.479] (II) fglrx(0): EDID Version: 1.3
[ 27.479] (II) fglrx(0): Digital Display Input
[ 27.479] (II) fglrx(0): DFP 1.x compatible TMDS
[ 27.479] (II) fglrx(0): Max Image Size [cm]: horiz.: 27 vert.: 17
[ 27.479] (II) fglrx(0): Gamma: 2.20
[ 27.479] (II) fglrx(0): DPMS capabilities: StandBy Off
[ 27.479] (II) fglrx(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 27.479] (II) fglrx(0): First detailed timing is preferred mode
[ 27.479] (II) fglrx(0): redX: 0.589 redY: 0.341 greenX: 0.321 greenY: 0.535
[ 27.479] (II) fglrx(0): blueX: 0.157 blueY: 0.145 whiteX: 0.313 whiteY: 0.329
[ 27.479] (II) fglrx(0): Supported established timings:
[ 27.479] (II) fglrx(0): 720x400@70Hz
[ 27.479] (II) fglrx(0): 640x480@60Hz
[ 27.479] (II) fglrx(0): 640x480@75Hz
[ 27.479] (II) fglrx(0): 800x600@60Hz
[ 27.479] (II) fglrx(0): 800x600@72Hz
[ 27.479] (II) fglrx(0): 800x600@75Hz
[ 27.479] (II) fglrx(0): 832x624@75Hz
[ 27.479] (II) fglrx(0): 1024x768@60Hz
[ 27.479] (II) fglrx(0): 1024x768@70Hz
[ 27.479] (II) fglrx(0): 1024x768@75Hz
[ 27.479] (II) fglrx(0): Manufacturer's mask: 0
[ 27.479] (II) fglrx(0): Supported standard timings:
[ 27.479] (II) fglrx(0): #0: hsize: 1280 vsize 800 refresh: 60 vid: 129
[ 27.479] (II) fglrx(0): Supported detailed timing:
[ 27.479] (II) fglrx(0): clock: 83.4 MHz Image Size: 261 x 163 mm
[ 27.479] (II) fglrx(0): h_active: 1280 h_sync: 1480 h_sync_end 1616 h_blank_end 1680 h_border: 0
[ 27.479] (II) fglrx(0): v_active: 800 v_sync: 824 v_sync_end 827 v_blanking: 828 v_border: 0
[ 27.479] (II) fglrx(0): Ranges: V min: 56 V max: 75 Hz, H min: 31 H max: 82 kHz, PixClock max 145 MHz
[ 27.479] (II) fglrx(0): Serial No: 8AC005284
[ 27.479] (II) fglrx(0): Monitor name: Cintiq 12WX
[ 27.479] (II) fglrx(0): EDID (in hex):
[ 27.479] (II) fglrx(0): 00ffffffffffff005c231910a4140000
[ 27.479] (II) fglrx(0): 05120103811b1178aad4459657528928
[ 27.479] (II) fglrx(0): 255054a5ee0081000101010101010101
[ 27.479] (II) fglrx(0): 0101010101019420009051201c30c888
[ 27.479] (II) fglrx(0): 830405a31000001e000000fd00384b1f
[ 27.479] (II) fglrx(0): 520e000a202020202020000000ff0038
[ 27.479] (II) fglrx(0): 414330303532383420202020000000fc
[ 27.479] (II) fglrx(0): 0043696e74697120313257580a200023
[ 27.479] (II) fglrx(0): End of Display1 EDID data --------------------
[ 27.767] (II) fglrx(0): EDID for output DFP1
[ 27.767] (II) fglrx(0): Manufacturer: ACR Model: 87 Serial#: 2435877271
[ 27.767] (II) fglrx(0): Year: 2009 Week: 13
[ 27.767] (II) fglrx(0): EDID Version: 1.3
[ 27.768] (II) fglrx(0): Digital Display Input
[ 27.768] (II) fglrx(0): Max Image Size [cm]: horiz.: 48 vert.: 27
[ 27.768] (II) fglrx(0): Gamma: 2.20
[ 27.768] (II) fglrx(0): DPMS capabilities: StandBy Suspend
[ 27.768] (II) fglrx(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 27.768] (II) fglrx(0): First detailed timing is preferred mode
[ 27.768] (II) fglrx(0): redX: 0.640 redY: 0.330 greenX: 0.300 greenY: 0.600
[ 27.768] (II) fglrx(0): blueX: 0.150 blueY: 0.060 whiteX: 0.313 whiteY: 0.329
[ 27.768] (II) fglrx(0): Supported established timings:
[ 27.768] (II) fglrx(0): 720x400@70Hz
[ 27.768] (II) fglrx(0): 640x480@60Hz
[ 27.768] (II) fglrx(0): 640x480@67Hz
[ 27.768] (II) fglrx(0): 640x480@72Hz
[ 27.768] (II) fglrx(0): 640x480@75Hz
[ 27.768] (II) fglrx(0): 800x600@56Hz
[ 27.768] (II) fglrx(0): 800x600@60Hz
[ 27.768] (II) fglrx(0): 800x600@72Hz
[ 27.768] (II) fglrx(0): 800x600@75Hz
[ 27.768] (II) fglrx(0): 832x624@75Hz
[ 27.768] (II) fglrx(0): 1024x768@60Hz
[ 27.768] (II) fglrx(0): 1024x768@70Hz
[ 27.768] (II) fglrx(0): 1024x768@75Hz
[ 27.768] (II) fglrx(0): 1280x1024@75Hz
[ 27.768] (II) fglrx(0): 1152x864@75Hz
[ 27.768] (II) fglrx(0): Manufacturer's mask: 0
[ 27.768] (II) fglrx(0): Supported standard timings:
[ 27.768] (II) fglrx(0): #0: hsize: 1152 vsize 864 refresh: 75 vid: 20337
[ 27.768] (II) fglrx(0): #1: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
[ 27.768] (II) fglrx(0): #2: hsize: 1680 vsize 1050 refresh: 60 vid: 179
[ 27.768] (II) fglrx(0): #3: hsize: 1920 vsize 1080 refresh: 60 vid: 49361
[ 27.768] (II) fglrx(0): #4: hsize: 1440 vsize 900 refresh: 60 vid: 149
[ 27.768] (II) fglrx(0): #5: hsize: 1600 vsize 1200 refresh: 60 vid: 16553
[ 27.768] (II) fglrx(0): #6: hsize: 1280 vsize 960 refresh: 60 vid: 16513
[ 27.768] (II) fglrx(0): #7: hsize: 1280 vsize 720 refresh: 60 vid: 49281
[ 27.768] (II) fglrx(0): Supported detailed timing:
[ 27.768] (II) fglrx(0): clock: 138.5 MHz Image Size: 531 x 299 mm
[ 27.768] (II) fglrx(0): h_active: 1920 h_sync: 1968 h_sync_end 2000 h_blank_end 2080 h_border: 0
[ 27.768] (II) fglrx(0): v_active: 1080 v_sync: 1083 v_sync_end 1088 v_blanking: 1110 v_border: 0
[ 27.768] (II) fglrx(0): Ranges: V min: 56 V max: 76 Hz, H min: 31 H max: 83 kHz, PixClock max 175 MHz
[ 27.768] (II) fglrx(0): Monitor name: H213H
[ 27.768] (II) fglrx(0): Serial No: LF80D0028500
[ 27.768] (II) fglrx(0): EDID (in hex):
[ 27.768] (II) fglrx(0): 00ffffffffffff000472870097893091
[ 27.768] (II) fglrx(0): 0d13010380301b78caee95a3544c9926
[ 27.768] (II) fglrx(0): 0f5054bfef80714f8180b300d1c09500
[ 27.768] (II) fglrx(0): a940814081c01a3680a070381e403020
[ 27.768] (II) fglrx(0): 3500132b21000018000000fd00384c1f
[ 27.768] (II) fglrx(0): 5311000a202020202020000000fc0048
[ 27.768] (II) fglrx(0): 323133480a20202020202020000000ff
[ 27.768] (II) fglrx(0): 004c46383044303032383530300a001a
[ 27.768] (II) fglrx(0): EDID vendor "ACR", prod id 135
[ 27.781] (II) fglrx(0): Using EDID range info for horizontal sync
[ 27.781] (II) fglrx(0): Using EDID range info for vertical refresh
[ 27.781] (II) fglrx(0): Printing DDC gathered Modelines:
[ 27.781] (II) fglrx(0): Modeline "1920x1080"x0.0 138.50 1920 1968 2000 2080 1080 1083 1088 1110 -hsync -vsync (66.6 kHz)
[ 27.781] (II) fglrx(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
[ 27.781] (II) fglrx(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
[ 27.781] (II) fglrx(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
[ 27.781] (II) fglrx(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)
[ 27.781] (II) fglrx(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
[ 27.781] (II) fglrx(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 27.781] (II) fglrx(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
[ 27.781] (II) fglrx(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
[ 27.781] (II) fglrx(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
[ 27.781] (II) fglrx(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
[ 27.781] (II) fglrx(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
[ 27.781] (II) fglrx(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
[ 27.781] (II) fglrx(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
[ 27.781] (II) fglrx(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
[ 27.781] (II) fglrx(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
[ 27.781] (II) fglrx(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
[ 27.781] (II) fglrx(0): Modeline "1680x1050"x0.0 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz)
[ 27.781] (II) fglrx(0): Modeline "1920x1080"x60.0 172.80 1920 2040 2248 2576 1080 1081 1084 1118 -hsync +vsync (67.1 kHz)
[ 27.781] (II) fglrx(0): Modeline "1440x900"x0.0 88.75 1440 1488 1520 1600 900 903 909 926 +hsync -vsync (55.5 kHz)
[ 27.781] (II) fglrx(0): Modeline "1600x1200"x0.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz)
[ 27.781] (II) fglrx(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
[ 27.781] (II) fglrx(0): Modeline "1280x720"x60.0 74.48 1280 1336 1472 1664 720 721 724 746 -hsync +vsync (44.8 kHz)
[ 27.781] (II) fglrx(0): Printing probed modes for output DFP1
[ 27.781] (II) fglrx(0): Modeline "1920x1080"x60.0 138.50 1920 1968 2000 2080 1080 1083 1088 1110 +hsync +vsync (66.6 kHz)
[ 27.781] (II) fglrx(0): Modeline "1776x1000"x60.0 147.05 1776 1880 2072 2368 1000 1001 1004 1035 +hsync -vsync (62.1 kHz)
[ 27.781] (II) fglrx(0): Modeline "1600x900"x60.0 108.00 1600 1624 1704 1800 900 901 904 1000 -hsync -vsync (60.0 kHz)
[ 27.781] (II) fglrx(0): Modeline "1600x1200"x60.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 -hsync -vsync (75.0 kHz)
[ 27.781] (II) fglrx(0): Modeline "1680x1050"x60.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 +hsync -vsync (65.3 kHz)
[ 27.781] (II) fglrx(0): Modeline "1400x1050"x60.0 121.75 1400 1488 1632 1864 1050 1053 1057 1089 +hsync -vsync (65.3 kHz)
[ 27.781] (II) fglrx(0): Modeline "1360x1024"x60.0 116.01 1360 1448 1592 1824 1024 1025 1028 1060 +hsync -vsync (63.6 kHz)
[ 27.781] (II) fglrx(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 -hsync -vsync (80.0 kHz)
[ 27.781] (II) fglrx(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 -hsync -vsync (64.0 kHz)
[ 27.781] (II) fglrx(0): Modeline "1440x900"x60.0 106.50 1440 1520 1672 1904 900 903 909 934 +hsync -vsync (55.9 kHz)
[ 27.781] (II) fglrx(0): Modeline "1280x960"x75.0 129.86 1280 1368 1504 1728 960 961 964 1002 +hsync -vsync (75.2 kHz)
[ 27.781] (II) fglrx(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 -hsync -vsync (60.0 kHz)
[ 27.781] (II) fglrx(0): Modeline "1280x800"x75.0 107.21 1280 1360 1496 1712 800 801 804 835 +hsync -vsync (62.6 kHz)
[ 27.781] (II) fglrx(0): Modeline "1280x800"x60.0 83.46 1280 1344 1480 1680 800 801 804 828 +hsync -vsync (49.7 kHz)
[ 27.781] (II) fglrx(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 -hsync -vsync (67.5 kHz)
[ 27.781] (II) fglrx(0): Modeline "1152x864"x60.0 81.62 1152 1216 1336 1520 864 865 868 895 +hsync -vsync (53.7 kHz)
[ 27.781] (II) fglrx(0): Modeline "1280x768"x75.0 102.25 1280 1360 1488 1696 768 771 778 805 +hsync -vsync (60.3 kHz)
[ 27.781] (II) fglrx(0): Modeline "1280x768"x60.0 79.50 1280 1344 1472 1664 768 771 778 798 +hsync -vsync (47.8 kHz)
[ 27.781] (II) fglrx(0): Modeline "1280x720"x60.0 74.25 1280 1390 1430 1650 720 725 730 750 -hsync -vsync (45.0 kHz)
[ 27.781] (II) fglrx(0): Modeline "1024x768"x75.0 78.75 1024 1040 1136 1312 768 769 772 800 -hsync -vsync (60.0 kHz)
[ 27.781] (II) fglrx(0): Modeline "1024x768"x70.0 75.00 1024 1048 1184 1328 768 771 777 806 +hsync +vsync (56.5 kHz)
[ 27.781] (II) fglrx(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 +hsync +vsync (48.4 kHz)
[ 27.781] (II) fglrx(0): Modeline "800x600"x72.0 50.00 800 856 976 1040 600 637 643 666 -hsync -vsync (48.1 kHz)
[ 27.781] (II) fglrx(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 -hsync -vsync (46.9 kHz)
[ 27.781] (II) fglrx(0): Modeline "800x600"x70.0 45.50 800 840 920 1040 600 601 604 625 +hsync -vsync (43.8 kHz)
[ 27.781] (II) fglrx(0): Modeline "800x600"x60.0 40.00 800 840 968 1056 600 601 605 628 -hsync -vsync (37.9 kHz)
[ 27.781] (II) fglrx(0): Modeline "800x600"x56.0 36.00 800 824 896 1024 600 601 603 625 -hsync -vsync (35.2 kHz)
[ 27.781] (II) fglrx(0): Modeline "720x480"x60.0 26.71 720 736 808 896 480 481 484 497 +hsync -vsync (29.8 kHz)
[ 27.781] (II) fglrx(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 +hsync +vsync (37.5 kHz)
[ 27.781] (II) fglrx(0): Modeline "640x480"x72.0 31.50 640 656 696 832 480 481 484 520 +hsync +vsync (37.9 kHz)
[ 27.781] (II) fglrx(0): Modeline "640x480"x60.0 25.18 640 648 744 800 480 482 484 525 +hsync +vsync (31.5 kHz)
[ 27.781] (II) fglrx(0): EDID for output DFP2
[ 27.781] (II) fglrx(0): Manufacturer: WAC Model: 1019 Serial#: 5284
[ 27.781] (II) fglrx(0): Year: 2008 Week: 5
[ 27.781] (II) fglrx(0): EDID Version: 1.3
[ 27.781] (II) fglrx(0): Digital Display Input
[ 27.781] (II) fglrx(0): DFP 1.x compatible TMDS
[ 27.781] (II) fglrx(0): Max Image Size [cm]: horiz.: 27 vert.: 17
[ 27.781] (II) fglrx(0): Gamma: 2.20
[ 27.781] (II) fglrx(0): DPMS capabilities: StandBy Off
[ 27.781] (II) fglrx(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 27.781] (II) fglrx(0): First detailed timing is preferred mode
[ 27.781] (II) fglrx(0): redX: 0.589 redY: 0.341 greenX: 0.321 greenY: 0.535
[ 27.781] (II) fglrx(0): blueX: 0.157 blueY: 0.145 whiteX: 0.313 whiteY: 0.329
[ 27.781] (II) fglrx(0): Supported established timings:
[ 27.781] (II) fglrx(0): 720x400@70Hz
[ 27.781] (II) fglrx(0): 640x480@60Hz
[ 27.781] (II) fglrx(0): 640x480@75Hz
[ 27.781] (II) fglrx(0): 800x600@60Hz
[ 27.781] (II) fglrx(0): 800x600@72Hz
[ 27.781] (II) fglrx(0): 800x600@75Hz
[ 27.781] (II) fglrx(0): 832x624@75Hz
[ 27.781] (II) fglrx(0): 1024x768@60Hz
[ 27.781] (II) fglrx(0): 1024x768@70Hz
[ 27.781] (II) fglrx(0): 1024x768@75Hz
[ 27.781] (II) fglrx(0): Manufacturer's mask: 0
[ 27.781] (II) fglrx(0): Supported standard timings:
[ 27.781] (II) fglrx(0): #0: hsize: 1280 vsize 800 refresh: 60 vid: 129
[ 27.781] (II) fglrx(0): Supported detailed timing:
[ 27.781] (II) fglrx(0): clock: 83.4 MHz Image Size: 261 x 163 mm
[ 27.781] (II) fglrx(0): h_active: 1280 h_sync: 1480 h_sync_end 1616 h_blank_end 1680 h_border: 0
[ 27.781] (II) fglrx(0): v_active: 800 v_sync: 824 v_sync_end 827 v_blanking: 828 v_border: 0
[ 27.781] (II) fglrx(0): Ranges: V min: 56 V max: 75 Hz, H min: 31 H max: 82 kHz, PixClock max 145 MHz
[ 27.781] (II) fglrx(0): Serial No: 8AC005284
[ 27.781] (II) fglrx(0): Monitor name: Cintiq 12WX
[ 27.781] (II) fglrx(0): EDID (in hex):
[ 27.781] (II) fglrx(0): 00ffffffffffff005c231910a4140000
[ 27.781] (II) fglrx(0): 05120103811b1178aad4459657528928
[ 27.781] (II) fglrx(0): 255054a5ee0081000101010101010101
[ 27.781] (II) fglrx(0): 0101010101019420009051201c30c888
[ 27.781] (II) fglrx(0): 830405a31000001e000000fd00384b1f
[ 27.781] (II) fglrx(0): 520e000a202020202020000000ff0038
[ 27.781] (II) fglrx(0): 414330303532383420202020000000fc
[ 27.781] (II) fglrx(0): 0043696e74697120313257580a200023
[ 27.781] (II) fglrx(0): Printing probed modes for output DFP2
[ 27.781] (II) fglrx(0): Modeline "1280x800"x60.0 83.40 1280 1480 1616 1680 800 824 827 828 -hsync -vsync (49.6 kHz)
[ 27.781] (II) fglrx(0): Modeline "1280x768"x60.0 79.50 1280 1344 1472 1664 768 771 778 798 +hsync -vsync (47.8 kHz)
[ 27.781] (II) fglrx(0): Modeline "1280x720"x60.0 74.25 1280 1390 1430 1650 720 725 730 750 -hsync -vsync (45.0 kHz)
[ 27.781] (II) fglrx(0): Modeline "1152x648"x60.0 59.90 1152 1200 1320 1488 648 649 652 671 +hsync -vsync (40.3 kHz)
[ 27.781] (II) fglrx(0): Modeline "1024x768"x75.0 78.75 1024 1040 1136 1312 768 769 772 800 -hsync -vsync (60.0 kHz)
[ 27.781] (II) fglrx(0): Modeline "1024x768"x70.0 75.00 1024 1048 1184 1328 768 771 777 806 +hsync +vsync (56.5 kHz)
[ 27.781] (II) fglrx(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 +hsync +vsync (48.4 kHz)
[ 27.781] (II) fglrx(0): Modeline "800x600"x72.0 50.00 800 856 976 1040 600 637 643 666 -hsync -vsync (48.1 kHz)
[ 27.781] (II) fglrx(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 -hsync -vsync (46.9 kHz)
[ 27.781] (II) fglrx(0): Modeline "800x600"x70.0 45.50 800 840 920 1040 600 601 604 625 +hsync -vsync (43.8 kHz)
[ 27.781] (II) fglrx(0): Modeline "800x600"x60.0 40.00 800 840 968 1056 600 601 605 628 -hsync -vsync (37.9 kHz)
[ 27.781] (II) fglrx(0): Modeline "720x480"x60.0 26.71 720 736 808 896 480 481 484 497 +hsync -vsync (29.8 kHz)
[ 27.781] (II) fglrx(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 +hsync +vsync (37.5 kHz)
[ 27.781] (II) fglrx(0): Modeline "640x480"x72.0 31.50 640 656 696 832 480 481 484 520 +hsync +vsync (37.9 kHz)
[ 27.781] (II) fglrx(0): Modeline "640x480"x60.0 25.18 640 648 744 800 480 482 484 525 +hsync +vsync (31.5 kHz)
[ 27.781] (II) fglrx(0): EDID for output CRT1
[ 27.781] (II) fglrx(0): EDID for output CRT2
[ 27.782] (II) fglrx(0): EDID for output TV
[ 27.782] (II) fglrx(0): EDID for output CV
[ 27.782] (II) fglrx(0): Output DFP1 connected
[ 27.782] (II) fglrx(0): Output DFP2 disabled by config file
[ 27.782] (II) fglrx(0): Output CRT1 disconnected
[ 27.782] (II) fglrx(0): Output CRT2 disconnected
[ 27.782] (II) fglrx(0): Output TV disconnected
[ 27.782] (II) fglrx(0): Output CV disconnected
[ 27.782] (II) fglrx(0): Using user preference for initial modes
[ 27.782] (II) fglrx(0): Output DFP1 using initial mode 1920x1080
[ 27.782] (II) fglrx(0): Display dimensions: (480, 270) mm
[ 27.782] (II) fglrx(0): DPI set to (101, 101)
[ 27.782] (II) fglrx(0): Adapter ATI Radeon HD 4800 Series has 2 configurable heads and 2 displays connected.
[ 27.782] (==) fglrx(0): PseudoColor visuals disabled
[ 27.782] (II) Loading sub module "ramdac"
[ 27.782] (II) LoadModule: "ramdac"
[ 27.782] (II) Module "ramdac" already built-in
[ 27.782] (==) fglrx(0): NoDRI = NO
[ 27.782] (==) fglrx(0): Capabilities: 0x00000000
[ 27.782] (==) fglrx(0): CapabilitiesEx: 0x00000000
[ 27.782] (==) fglrx(0): OpenGL ClientDriverName: "fglrx_dri.so"
[ 27.782] (==) fglrx(0): UseFastTLS=0
[ 27.782] (==) fglrx(0): BlockSignalsOnLock=1
[ 27.782] (II) fglrx(0): Desktop Vsync is enabled.
[ 27.782] (--) Depth 24 pixmap format is 32 bpp
[ 27.782] (II) Loading extension ATIFGLRXDRI
[ 27.782] (II) fglrx(0): doing swlDriScreenInit
[ 27.782] (II) fglrx(0): swlDriScreenInit for fglrx driver
[ 27.782] ukiDynamicMajor: found major device number 251
[ 27.782] ukiDynamicMajor: found major device number 251
[ 27.782] ukiDynamicMajor: found major device number 251
[ 27.782] ukiOpenByBusid: Searching for BusID PCI:1:0:0
[ 27.782] ukiOpenDevice: node name is /dev/ati/card0
[ 27.782] ukiOpenDevice: open result is 16, (OK)
[ 27.782] ukiOpenByBusid: ukiOpenMinor returns 16
[ 27.782] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
[ 27.782] (II) fglrx(0): [uki] DRM interface version 1.0
[ 27.782] (II) fglrx(0): [uki] created "fglrx" driver at busid "PCI:1:0:0"
[ 27.782] (II) fglrx(0): [uki] added 8192 byte SAREA at 0x2000
[ 27.782] (II) fglrx(0): [uki] mapped SAREA 0x2000 to 0x7f541545b000
[ 27.782] (II) fglrx(0): [uki] framebuffer handle = 0x3000
[ 27.782] (II) fglrx(0): [uki] added 1 reserved context for kernel
[ 27.782] (II) fglrx(0): swlDriScreenInit done
[ 27.782] (II) fglrx(0): Kernel Module Version Information:
[ 27.782] (II) fglrx(0): Name: fglrx
[ 27.782] (II) fglrx(0): Version: 8.97.2
[ 27.782] (II) fglrx(0): Date: Jul 4 2012
[ 27.782] (II) fglrx(0): Desc: ATI FireGL DRM kernel module
[ 27.782] (II) fglrx(0): Kernel Module version matches driver.
[ 27.782] (II) fglrx(0): Kernel Module Build Time Information:
[ 27.782] (II) fglrx(0): Build-Kernel UTS_RELEASE: 3.6.4-1-ARCH
[ 27.782] (II) fglrx(0): Build-Kernel MODVERSIONS: no
[ 27.782] (II) fglrx(0): Build-Kernel __SMP__: no
[ 27.782] (II) fglrx(0): Build-Kernel PAGE_SIZE: 0x1000
[ 27.782] (II) fglrx(0): [uki] register handle = 0x00004000
[ 27.799] (II) fglrx(0): DRI initialization successfull
[ 27.800] (II) fglrx(0): FBADPhys: 0xf00000000 FBMappedSize: 0x01068000
[ 27.804] (==) fglrx(0): Backing store disabled
[ 27.804] (II) Loading extension FGLRXEXTENSION
[ 27.804] (==) fglrx(0): DPMS enabled
[ 27.804] (II) fglrx(0): Initialized in-driver Xinerama extension
[ 27.804] (**) fglrx(0): Textured Video is enabled.
[ 27.804] (II) LoadModule: "glesx"
[ 27.805] (II) Loading /usr/lib/xorg/modules/glesx.so
[ 27.934] (II) Module glesx: vendor="X.Org Foundation"
[ 27.934] compiled for 1.4.99.906, module version = 1.0.0
[ 27.934] (II) Loading extension GLESX
[ 27.934] (II) fglrx(0): GLESX enableFlags = 528
[ 27.945] (II) fglrx(0): GLESX is enabled
[ 27.945] (II) LoadModule: "amdxmm"
[ 27.945] (II) Loading /usr/lib/xorg/modules/amdxmm.so
[ 27.955] (II) Module amdxmm: vendor="X.Org Foundation"
[ 27.955] compiled for 1.4.99.906, module version = 2.0.0
[ 27.955] (II) Loading extension AMDXVOPL
[ 27.955] (II) Loading extension AMDXVBA
[ 27.958] (II) fglrx(0): UVD feature is enabled(II) fglrx(0):
[ 27.961] (II) fglrx(0): Enable composite support successfully
[ 27.961] (II) fglrx(0): X context handle = 0x1
[ 27.961] (II) fglrx(0): [DRI] installation complete
[ 27.961] (==) fglrx(0): Silken mouse enabled
[ 27.962] (==) fglrx(0): Using HW cursor of display infrastructure!
[ 27.962] (II) fglrx(0): Disabling in-server RandR and enabling in-driver RandR 1.2.
[ 27.962] (II) fglrx(0): Cannot get TV Format. Set all TV geometry value to zero!
[ 27.962] (II) fglrx(0): Cannot set TV horizontal size.
[ 27.962] (II) fglrx(0): Cannot get TV Format for trying to adjust horizontal position after horizontal size changed.
[ 27.962] (II) fglrx(0): Cannot set TV horizontal position.
[ 27.962] (II) fglrx(0): Cannot set TV vertical position.
[ 27.984] (II) fglrx(0): User Preference Output DFP1 using refresh rate 60.0 Hz.
[ 28.079] (--) RandR disabled
[ 28.079] (II) Initializing built-in extension Generic Event Extension
[ 28.079] (II) Initializing built-in extension SHAPE
[ 28.079] (II) Initializing built-in extension MIT-SHM
[ 28.079] (II) Initializing built-in extension XInputExtension
[ 28.079] (II) Initializing built-in extension XTEST
[ 28.079] (II) Initializing built-in extension BIG-REQUESTS
[ 28.079] (II) Initializing built-in extension SYNC
[ 28.079] (II) Initializing built-in extension XKEYBOARD
[ 28.079] (II) Initializing built-in extension XC-MISC
[ 28.079] (II) Initializing built-in extension SECURITY
[ 28.079] (II) Initializing built-in extension XINERAMA
[ 28.079] (II) Initializing built-in extension XFIXES
[ 28.079] (II) Initializing built-in extension RENDER
[ 28.079] (II) Initializing built-in extension RANDR
[ 28.079] (II) Initializing built-in extension COMPOSITE
[ 28.079] (II) Initializing built-in extension DAMAGE
[ 28.081] ukiDynamicMajor: found major device number 251
[ 28.081] ukiDynamicMajor: found major device number 251
[ 28.081] ukiOpenByBusid: Searching for BusID PCI:1:0:0
[ 28.081] ukiOpenDevice: node name is /dev/ati/card0
[ 28.081] ukiOpenDevice: open result is 17, (OK)
[ 28.081] ukiOpenByBusid: ukiOpenMinor returns 17
[ 28.081] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
[ 28.808] (II) AIGLX: Loaded and initialized OpenGL driver(II) GLX: Initialized DRI GL provider for screen 0
[ 28.932] (II) fglrx(0): Enable the clock gating!
[ 28.977] (II) fglrx(0): Desktop Vsync is enabled.
[ 28.977] (II) fglrx(0): Setting screen physical size to 508 x 285
[ 29.247] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[ 29.247] (**) Power Button: Applying InputClass "system-keyboard"
[ 29.247] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 29.247] (II) LoadModule: "evdev"
[ 29.247] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 29.261] (II) Module evdev: vendor="X.Org Foundation"
[ 29.261] compiled for 1.10.99.902, module version = 2.6.0
[ 29.261] Module class: X.Org XInput Driver
[ 29.261] ABI class: X.Org XInput driver, version 13.0
[ 29.261] (II) Using input driver 'evdev' for 'Power Button'
[ 29.261] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 29.261] (**) Power Button: always reports core events
[ 29.261] (**) Power Button: Device: "/dev/input/event1"
[ 29.261] (--) Power Button: Found keys
[ 29.261] (II) Power Button: Configuring as keyboard
[ 29.261] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1/event1"
[ 29.261] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 29.261] (**) Option "xkb_rules" "evdev"
[ 29.261] (**) Option "xkb_model" "pc105+inet"
[ 29.261] (**) Option "xkb_layout" "us"
[ 29.261] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[ 29.305] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[ 29.305] (**) Power Button: Applying InputClass "system-keyboard"
[ 29.305] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 29.305] (II) Using input driver 'evdev' for 'Power Button'
[ 29.305] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 29.306] (**) Power Button: always reports core events
[ 29.306] (**) Power Button: Device: "/dev/input/event0"
[ 29.306] (--) Power Button: Found keys
[ 29.306] (II) Power Button: Configuring as keyboard
[ 29.306] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0/event0"
[ 29.306] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[ 29.306] (**) Option "xkb_rules" "evdev"
[ 29.306] (**) Option "xkb_model" "pc105+inet"
[ 29.306] (**) Option "xkb_layout" "us"
[ 29.306] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[ 29.307] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=3 (/dev/input/event15)
[ 29.307] (II) No input driver specified, ignoring this device.
[ 29.307] (II) This device may have been added with another device file.
[ 29.308] (II) config/udev: Adding input device Wacom Cintiq 12WX (/dev/input/event3)
[ 29.308] (**) Wacom Cintiq 12WX: Applying InputClass "evdev tablet catchall"
[ 29.308] (**) Wacom Cintiq 12WX: Applying InputClass "Wacom class"
[ 29.308] (II) LoadModule: "wacom"
[ 29.308] (II) Loading /usr/lib/xorg/modules/input/wacom_drv.so
[ 29.313] (II) Module wacom: vendor="X.Org Foundation"
[ 29.313] compiled for 1.11.3, module version = 0.13.0
[ 29.313] Module class: X.Org XInput Driver
[ 29.313] ABI class: X.Org XInput driver, version 13.0
[ 29.313] (II) Using input driver 'wacom' for 'Wacom Cintiq 12WX'
[ 29.313] (II) Loading /usr/lib/xorg/modules/input/wacom_drv.so
[ 29.313] (**) Wacom Cintiq 12WX: always reports core events
[ 29.313] (**) Option "Device" "/dev/input/event3"
[ 29.314] (II) Wacom Cintiq 12WX: type not specified, assuming 'stylus'.
[ 29.314] (II) Wacom Cintiq 12WX: other types will be automatically added.
[ 29.314] (--) Wacom Cintiq 12WX stylus: using pressure threshold of 27 for button 1
[ 29.314] (--) Wacom Cintiq 12WX stylus: Wacom USB CintiqV5 tablet maxX=53020 maxY=33440 maxZ=1023 resX=200000 resY=200000 tilt=enabled
[ 29.314] (II) Wacom Cintiq 12WX stylus: hotplugging dependent devices.
[ 29.314] (EE) Wacom Cintiq 12WX stylus: Invalid type 'cursor' for this device.
[ 29.314] (EE) Wacom Cintiq 12WX stylus: Invalid type 'touch' for this device.
[ 29.314] (II) Wacom Cintiq 12WX stylus: hotplugging completed.
[ 29.315] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:12.0/usb3/3-2/3-2:1.0/input/input3/event3"
[ 29.315] (II) XINPUT: Adding extended input device "Wacom Cintiq 12WX stylus" (type: STYLUS, id 8)
[ 29.316] (**) Wacom Cintiq 12WX stylus: (accel) keeping acceleration scheme 1
[ 29.316] (**) Wacom Cintiq 12WX stylus: (accel) acceleration profile 0
[ 29.316] (**) Wacom Cintiq 12WX stylus: (accel) acceleration factor: 2.000
[ 29.316] (**) Wacom Cintiq 12WX stylus: (accel) acceleration threshold: 4
[ 29.317] (II) config/udev: Adding input device Wacom Cintiq 12WX (/dev/input/mouse0)
[ 29.317] (II) No input driver specified, ignoring this device.
[ 29.317] (II) This device may have been added with another device file.
[ 29.317] (II) config/udev: Adding input device Microsoft Microsoft® SideWinder™ X5 Mouse (/dev/input/event6)
[ 29.317] (**) Microsoft Microsoft® SideWinder™ X5 Mouse: Applying InputClass "system-keyboard"
[ 29.317] (**) Microsoft Microsoft® SideWinder™ X5 Mouse: Applying InputClass "evdev pointer catchall"
[ 29.318] (**) Microsoft Microsoft® SideWinder™ X5 Mouse: Applying InputClass "evdev keyboard catchall"
[ 29.318] (II) Using input driver 'evdev' for 'Microsoft Microsoft® SideWinder™ X5 Mouse'
[ 29.318] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 29.318] (**) Microsoft Microsoft® SideWinder™ X5 Mouse: always reports core events
[ 29.318] (**) Microsoft Microsoft® SideWinder™ X5 Mouse: Device: "/dev/input/event6"
[ 29.318] (--) Microsoft Microsoft® SideWinder™ X5 Mouse: Found 9 mouse buttons
[ 29.318] (--) Microsoft Microsoft® SideWinder™ X5 Mouse: Found scroll wheel(s)
[ 29.318] (--) Microsoft Microsoft® SideWinder™ X5 Mouse: Found relative axes
[ 29.318] (--) Microsoft Microsoft® SideWinder™ X5 Mouse: Found x and y relative axes
[ 29.318] (--) Microsoft Microsoft® SideWinder™ X5 Mouse: Found absolute axes
[ 29.318] (--) Microsoft Microsoft® SideWinder™ X5 Mouse: Found x and y absolute axes
[ 29.318] (--) Microsoft Microsoft® SideWinder™ X5 Mouse: Found keys
[ 29.318] (II) Microsoft Microsoft® SideWinder™ X5 Mouse: Configuring as mouse
[ 29.318] (II) Microsoft Microsoft® SideWinder™ X5 Mouse: Configuring as keyboard
[ 29.318] (II) Microsoft Microsoft® SideWinder™ X5 Mouse: Adding scrollwheel support
[ 29.318] (**) Microsoft Microsoft® SideWinder™ X5 Mouse: YAxisMapping: buttons 4 and 5
[ 29.318] (**) Microsoft Microsoft® SideWinder™ X5 Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 29.318] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:12.0/usb3/3-3/3-3:1.0/input/input6/event6"
[ 29.318] (II) XINPUT: Adding extended input device "Microsoft Microsoft® SideWinder™ X5 Mouse" (type: KEYBOARD, id 9)
[ 29.318] (**) Option "xkb_rules" "evdev"
[ 29.318] (**) Option "xkb_model" "pc105+inet"
[ 29.318] (**) Option "xkb_layout" "us"
[ 29.318] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[ 29.319] (II) Microsoft Microsoft® SideWinder™ X5 Mouse: initialized for relative axes.
[ 29.319] (WW) Microsoft Microsoft® SideWinder™ X5 Mouse: ignoring absolute axes.
[ 29.319] (**) Microsoft Microsoft® SideWinder™ X5 Mouse: (accel) keeping acceleration scheme 1
[ 29.319] (**) Microsoft Microsoft® SideWinder™ X5 Mouse: (accel) acceleration profile 0
[ 29.319] (**) Microsoft Microsoft® SideWinder™ X5 Mouse: (accel) acceleration factor: 2.000
[ 29.319] (**) Microsoft Microsoft® SideWinder™ X5 Mouse: (accel) acceleration threshold: 4
[ 29.320] (II) config/udev: Adding input device Microsoft Microsoft® SideWinder™ X5 Mouse (/dev/input/js0)
[ 29.320] (**) Microsoft Microsoft® SideWinder™ X5 Mouse: Applying InputClass "system-keyboard"
[ 29.320] (II) No input driver specified, ignoring this device.
[ 29.320] (II) This device may have been added with another device file.
[ 29.321] (II) config/udev: Adding input device Microsoft Microsoft® SideWinder™ X5 Mouse (/dev/input/mouse1)
[ 29.321] (**) Microsoft Microsoft® SideWinder™ X5 Mouse: Applying InputClass "system-keyboard"
[ 29.321] (II) No input driver specified, ignoring this device.
[ 29.321] (II) This device may have been added with another device file.
[ 29.321] (II) config/udev: Adding input device Logitech USB Keyboard (/dev/input/event4)
[ 29.321] (**) Logitech USB Keyboard: Applying InputClass "system-keyboard"
[ 29.321] (**) Logitech USB Keyboard: Applying InputClass "evdev keyboard catchall"
[ 29.321] (II) Using input driver 'evdev' for 'Logitech USB Keyboard'
[ 29.321] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 29.321] (**) Logitech USB Keyboard: always reports core events
[ 29.321] (**) Logitech USB Keyboard: Device: "/dev/input/event4"
[ 29.322] (--) Logitech USB Keyboard: Found keys
[ 29.322] (II) Logitech USB Keyboard: Configuring as keyboard
[ 29.322] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:12.1/usb4/4-1/4-1:1.0/input/input4/event4"
[ 29.322] (II) XINPUT: Adding extended input device "Logitech USB Keyboard" (type: KEYBOARD, id 10)
[ 29.322] (**) Option "xkb_rules" "evdev"
[ 29.322] (**) Option "xkb_model" "pc105+inet"
[ 29.322] (**) Option "xkb_layout" "us"
[ 29.322] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[ 29.323] (II) config/udev: Adding input device Logitech USB Keyboard (/dev/input/event5)
[ 29.323] (**) Logitech USB Keyboard: Applying InputClass "system-keyboard"
[ 29.323] (**) Logitech USB Keyboard: Applying InputClass "evdev keyboard catchall"
[ 29.323] (II) Using input driver 'evdev' for 'Logitech USB Keyboard'
[ 29.323] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 29.323] (**) Logitech USB Keyboard: always reports core events
[ 29.323] (**) Logitech USB Keyboard: Device: "/dev/input/event5"
[ 29.323] (--) Logitech USB Keyboard: Found absolute axes
[ 29.323] (--) Logitech USB Keyboard: Found keys
[ 29.323] (II) Logitech USB Keyboard: Configuring as mouse
[ 29.323] (II) Logitech USB Keyboard: Configuring as keyboard
[ 29.323] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:12.1/usb4/4-1/4-1:1.1/input/input5/event5"
[ 29.323] (II) XINPUT: Adding extended input device "Logitech USB Keyboard" (type: KEYBOARD, id 11)
[ 29.323] (**) Option "xkb_rules" "evdev"
[ 29.323] (**) Option "xkb_model" "pc105+inet"
[ 29.323] (**) Option "xkb_layout" "us"
[ 29.323] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[ 29.324] (II) Logitech USB Keyboard: initialized for absolute axes.
[ 29.324] (**) Logitech USB Keyboard: (accel) keeping acceleration scheme 1
[ 29.324] (**) Logitech USB Keyboard: (accel) acceleration profile 0
[ 29.324] (**) Logitech USB Keyboard: (accel) acceleration factor: 2.000
[ 29.324] (**) Logitech USB Keyboard: (accel) acceleration threshold: 4
[ 29.325] (II) config/udev: Adding input device USB 2.0 Camera (/dev/input/event16)
[ 29.325] (**) USB 2.0 Camera: Applying InputClass "system-keyboard"
[ 29.325] (**) USB 2.0 Camera: Applying InputClass "evdev keyboard catchall"
[ 29.325] (II) Using input driver 'evdev' for 'USB 2.0 Camera'
[ 29.325] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 29.325] (**) USB 2.0 Camera: always reports core events
[ 29.325] (**) USB 2.0 Camera: Device: "/dev/input/event16"
[ 29.325] (--) USB 2.0 Camera: Found keys
[ 29.325] (II) USB 2.0 Camera: Configuring as keyboard
[ 29.325] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:12.2/usb1/1-1/1-1:1.0/input/input16/event16"
[ 29.325] (II) XINPUT: Adding extended input device "USB 2.0 Camera" (type: KEYBOARD, id 12)
[ 29.325] (**) Option "xkb_rules" "evdev"
[ 29.325] (**) Option "xkb_model" "pc105+inet"
[ 29.325] (**) Option "xkb_layout" "us"
[ 29.325] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[ 29.326] (II) config/udev: Adding input device HDA ATI SB Front Headphone (/dev/input/event10)
[ 29.326] (II) No input driver specified, ignoring this device.
[ 29.326] (II) This device may have been added with another device file.
[ 29.326] (II) config/udev: Adding input device HDA ATI SB Line Out Side (/dev/input/event11)
[ 29.326] (II) No input driver specified, ignoring this device.
[ 29.326] (II) This device may have been added with another device file.
[ 29.327] (II) config/udev: Adding input device HDA ATI SB Line Out CLFE (/dev/input/event12)
[ 29.327] (II) No input driver specified, ignoring this device.
[ 29.327] (II) This device may have been added with another device file.
[ 29.327] (II) config/udev: Adding input device HDA ATI SB Line Out Surround (/dev/input/event13)
[ 29.327] (II) No input driver specified, ignoring this device.
[ 29.327] (II) This device may have been added with another device file.
[ 29.327] (II) config/udev: Adding input device HDA ATI SB Line Out Front (/dev/input/event14)
[ 29.327] (II) No input driver specified, ignoring this device.
[ 29.327] (II) This device may have been added with another device file.
[ 29.327] (II) config/udev: Adding input device HDA ATI SB Line (/dev/input/event7)
[ 29.327] (II) No input driver specified, ignoring this device.
[ 29.327] (II) This device may have been added with another device file.
[ 29.327] (II) config/udev: Adding input device HDA ATI SB Front Mic (/dev/input/event8)
[ 29.327] (II) No input driver specified, ignoring this device.
[ 29.327] (II) This device may have been added with another device file.
[ 29.327] (II) config/udev: Adding input device HDA ATI SB Rear Mic (/dev/input/event9)
[ 29.327] (II) No input driver specified, ignoring this device.
[ 29.327] (II) This device may have been added with another device file.
[ 29.328] (II) config/udev: Adding input device PC Speaker (/dev/input/event2)
[ 29.328] (II) No input driver specified, ignoring this device.
[ 29.328] (II) This device may have been added with another device file.
[ 29.343] (**) Wacom Cintiq 12WX eraser: Applying InputClass "evdev tablet catchall"
[ 29.343] (**) Wacom Cintiq 12WX eraser: Applying InputClass "Wacom class"
[ 29.343] (II) Using input driver 'wacom' for 'Wacom Cintiq 12WX eraser'
[ 29.343] (II) Loading /usr/lib/xorg/modules/input/wacom_drv.so
[ 29.343] (**) Wacom Cintiq 12WX eraser: always reports core events
[ 29.343] (**) Option "Device" "/dev/input/event3"
[ 29.343] (**) Option "Type" "eraser"
[ 29.343] (--) Wacom Cintiq 12WX eraser: Wacom USB CintiqV5 tablet maxX=53020 maxY=33440 maxZ=1023 resX=200000 resY=200000 tilt=enabled
[ 29.360] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:12.0/usb3/3-2/3-2:1.0/input/input3/event3"
[ 29.360] (II) XINPUT: Adding extended input device "Wacom Cintiq 12WX eraser" (type: ERASER, id 13)
[ 29.360] (**) Wacom Cintiq 12WX eraser: (accel) keeping acceleration scheme 1
[ 29.360] (**) Wacom Cintiq 12WX eraser: (accel) acceleration profile 0
[ 29.360] (**) Wacom Cintiq 12WX eraser: (accel) acceleration factor: 2.000
[ 29.360] (**) Wacom Cintiq 12WX eraser: (accel) acceleration threshold: 4
[ 29.360] (**) Wacom Cintiq 12WX pad: Applying InputClass "evdev tablet catchall"
[ 29.360] (**) Wacom Cintiq 12WX pad: Applying InputClass "Wacom class"
[ 29.360] (II) Using input driver 'wacom' for 'Wacom Cintiq 12WX pad'
[ 29.360] (II) Loading /usr/lib/xorg/modules/input/wacom_drv.so
[ 29.360] (**) Wacom Cintiq 12WX pad: always reports core events
[ 29.360] (**) Option "Device" "/dev/input/event3"
[ 29.360] (**) Option "Type" "pad"
[ 29.360] (--) Wacom Cintiq 12WX pad: Wacom USB CintiqV5 tablet maxX=53020 maxY=33440 maxZ=1023 resX=200000 resY=200000 tilt=enabled
[ 29.360] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:12.0/usb3/3-2/3-2:1.0/input/input3/event3"
[ 29.360] (II) XINPUT: Adding extended input device "Wacom Cintiq 12WX pad" (type: PAD, id 14)
[ 29.360] (**) Wacom Cintiq 12WX pad: (accel) keeping acceleration scheme 1
[ 29.360] (**) Wacom Cintiq 12WX pad: (accel) acceleration profile 0
[ 29.360] (**) Wacom Cintiq 12WX pad: (accel) acceleration factor: 2.000
[ 29.360] (**) Wacom Cintiq 12WX pad: (accel) acceleration threshold: 4
[ 29.361] (II) fglrx(0): Restoring Recent Mode via PCS is not supported in RANDR 1.2 capable environments
[ 33.296] (II) fglrx(0): EDID vendor "ACR", prod id 135
[ 33.296] (II) fglrx(0): Using hsync ranges from config file
[ 33.296] (II) fglrx(0): Using vrefresh ranges from config file
[ 33.296] (II) fglrx(0): Printing DDC gathered Modelines:
[ 33.296] (II) fglrx(0): Modeline "1920x1080"x0.0 138.50 1920 1968 2000 2080 1080 1083 1088 1110 -hsync -vsync (66.6 kHz)
[ 33.296] (II) fglrx(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
[ 33.296] (II) fglrx(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
[ 33.296] (II) fglrx(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
[ 33.296] (II) fglrx(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)
[ 33.296] (II) fglrx(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
[ 33.296] (II) fglrx(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 33.296] (II) fglrx(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
[ 33.296] (II) fglrx(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
[ 33.296] (II) fglrx(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
[ 33.296] (II) fglrx(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
[ 33.296] (II) fglrx(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
[ 33.296] (II) fglrx(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
[ 33.296] (II) fglrx(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
[ 33.296] (II) fglrx(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
[ 33.296] (II) fglrx(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
[ 33.296] (II) fglrx(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
[ 33.296] (II) fglrx(0): Modeline "1680x1050"x0.0 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz)
[ 33.296] (II) fglrx(0): Modeline "1920x1080"x60.0 172.80 1920 2040 2248 2576 1080 1081 1084 1118 -hsync +vsync (67.1 kHz)
[ 33.296] (II) fglrx(0): Modeline "1440x900"x0.0 88.75 1440 1488 1520 1600 900 903 909 926 +hsync -vsync (55.5 kHz)
[ 33.296] (II) fglrx(0): Modeline "1600x1200"x0.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz)
[ 33.296] (II) fglrx(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
[ 33.296] (II) fglrx(0): Modeline "1280x720"x60.0 74.48 1280 1336 1472 1664 720 721 724 746 -hsync +vsync (44.8 kHz)
[ 33.743] (WW) fglrx(0): Cannot get updated TV attributes.
[ 37.495] (II) fglrx(0): EDID vendor "ACR", prod id 135
[ 37.495] (II) fglrx(0): Using hsync ranges from config file
[ 37.495] (II) fglrx(0): Using vrefresh ranges from config file
[ 37.495] (II) fglrx(0): Printing DDC gathered Modelines:
[ 37.495] (II) fglrx(0): Modeline "1920x1080"x0.0 138.50 1920 1968 2000 2080 1080 1083 1088 1110 -hsync -vsync (66.6 kHz)
[ 37.495] (II) fglrx(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
[ 37.495] (II) fglrx(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
[ 37.495] (II) fglrx(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
[ 37.495] (II) fglrx(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)
[ 37.495] (II) fglrx(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
[ 37.495] (II) fglrx(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 37.495] (II) fglrx(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
[ 37.495] (II) fglrx(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
[ 37.495] (II) fglrx(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
[ 37.495] (II) fglrx(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
[ 37.495] (II) fglrx(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
[ 37.495] (II) fglrx(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
[ 37.495] (II) fglrx(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
[ 37.495] (II) fglrx(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
[ 37.495] (II) fglrx(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
[ 37.495] (II) fglrx(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
[ 37.495] (II) fglrx(0): Modeline "1680x1050"x0.0 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz)
[ 37.495] (II) fglrx(0): Modeline "1920x1080"x60.0 172.80 1920 2040 2248 2576 1080 1081 1084 1118 -hsync +vsync (67.1 kHz)
[ 37.495] (II) fglrx(0): Modeline "1440x900"x0.0 88.75 1440 1488 1520 1600 900 903 909 926 +hsync -vsync (55.5 kHz)
[ 37.495] (II) fglrx(0): Modeline "1600x1200"x0.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz)
[ 37.495] (II) fglrx(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +h

The latest entry in the readout from "$ journalctl":
Nov 02 10:39:12 philip-linux pulseaudio[500]: [pulseaudio] bluetooth-util.c: org.bluez.Manager.ListAdapters() failed: org.freedesktop.system
Nov 02 10:39:15 philip-linux pulseaudio[544]: [pulseaudio] pid.c: Daemon already running.
Nov 02 10:39:18 philip-linux goa[569]: goa-daemon version 3.6.0 starting [main.c:112, main()]
Nov 02 10:39:20 philip-linux gnome-keyring-daemon[420]: keyring alias directory: /home/philip/.local/share/keyrings
Nov 02 10:39:23 philip-linux gnome-keyring-daemon[420]: Gkm: unsupported key algorithm in certificate: 1.2.840.10045.2.1
Nov 02 10:39:23 philip-linux gnome-keyring-daemon[420]: Gkm: unsupported key algorithm in certificate: 1.2.840.10045.2.1
Nov 02 10:39:23 philip-linux gnome-keyring-daemon[420]: Gkm: unsupported key algorithm in certificate: 1.2.840.10045.2.1
Nov 02 10:39:23 philip-linux gnome-keyring-daemon[420]: Gkm: unsupported key algorithm in certificate: 1.2.840.10045.2.1
Nov 02 10:39:23 philip-linux gnome-keyring-daemon[420]: Gkm: unsupported key algorithm in certificate: 1.2.840.10045.2.1
Nov 02 10:39:23 philip-linux gnome-keyring-daemon[420]: Gkm: unsupported key algorithm in certificate: 1.2.840.10045.2.1
Nov 02 10:39:23 philip-linux gnome-keyring-daemon[420]: Gkm: unsupported key algorithm in certificate: 1.2.840.10045.2.1
Nov 02 10:39:23 philip-linux gnome-keyring-daemon[420]: Gkm: unsupported key algorithm in certificate: 1.2.840.10045.2.1
Nov 02 10:39:23 philip-linux gnome-keyring-daemon[420]: Gkm: unsupported key algorithm in certificate: 1.2.840.10045.2.1
Nov 02 10:39:23 philip-linux gnome-keyring-daemon[420]: Gkm: unsupported key algorithm in certificate: 1.2.840.10045.2.1
and from "$ sudo journalctl":
...skipping...
Nov 02 10:39:20 philip-linux systemd[1]: Started Accounts Service.
Nov 02 10:39:20 philip-linux gnome-keyring-daemon[420]: keyring alias directory: /home/philip/.local/share/keyrings
Nov 02 10:39:20 philip-linux polkitd[268]: Registered Authentication Agent for unix-session:2 (system bus name :1.55 [/usr/bin/gnome-shell],
Nov 02 10:39:23 philip-linux gnome-keyring-daemon[420]: Gkm: unsupported key algorithm in certificate: 1.2.840.10045.2.1
Nov 02 10:39:23 philip-linux gnome-keyring-daemon[420]: Gkm: unsupported key algorithm in certificate: 1.2.840.10045.2.1
Nov 02 10:39:23 philip-linux gnome-keyring-daemon[420]: Gkm: unsupported key algorithm in certificate: 1.2.840.10045.2.1
Nov 02 10:39:23 philip-linux gnome-keyring-daemon[420]: Gkm: unsupported key algorithm in certificate: 1.2.840.10045.2.1
Nov 02 10:39:23 philip-linux gnome-keyring-daemon[420]: Gkm: unsupported key algorithm in certificate: 1.2.840.10045.2.1
Nov 02 10:39:23 philip-linux gnome-keyring-daemon[420]: Gkm: unsupported key algorithm in certificate: 1.2.840.10045.2.1
Nov 02 10:39:23 philip-linux gnome-keyring-daemon[420]: Gkm: unsupported key algorithm in certificate: 1.2.840.10045.2.1
Nov 02 10:39:23 philip-linux gnome-keyring-daemon[420]: Gkm: unsupported key algorithm in certificate: 1.2.840.10045.2.1
Nov 02 10:39:23 philip-linux gnome-keyring-daemon[420]: Gkm: unsupported key algorithm in certificate: 1.2.840.10045.2.1
Nov 02 10:39:23 philip-linux gnome-keyring-daemon[420]: Gkm: unsupported key algorithm in certificate: 1.2.840.10045.2.1
Nov 02 10:41:27 philip-linux dbus-daemon[251]: dbus[251]: [system] Activating via systemd: service name='org.freedesktop.hostname1' unit='db
Nov 02 10:41:27 philip-linux dbus[251]: [system] Activating via systemd: service name='org.freedesktop.hostname1' unit='dbus-org.freedesktop
Nov 02 10:41:27 philip-linux systemd[1]: Starting Hostname Service...
Nov 02 10:41:27 philip-linux dbus-daemon[251]: dbus[251]: [system] Successfully activated service 'org.freedesktop.hostname1'
Nov 02 10:41:27 philip-linux dbus[251]: [system] Successfully activated service 'org.freedesktop.hostname1'
Nov 02 10:41:27 philip-linux systemd[1]: Started Hostname Service.
Nov 02 10:42:30 philip-linux sudo[876]: philip : TTY=pts/0 ; PWD=/home/philip ; USER=root ; COMMAND=/usr/bin/journalctl
Nov 02 10:42:30 philip-linux sudo[876]: pam_unix(sudo:session): session opened for user root by philip(uid=0)
Nov 02 10:42:35 philip-linux sudo[876]: pam_unix(sudo:session): session closed for user root
Nov 02 10:53:18 philip-linux systemd[1]: Starting Cleanup of Temporary Directories...
Nov 02 10:53:18 philip-linux systemd-tmpfiles[958]: stat(/run/user/1000/gvfs) failed: Permission denied
Nov 02 10:53:18 philip-linux systemd[1]: Started Cleanup of Temporary Directories.
Nov 02 11:01:01 philip-linux /usr/sbin/crond[966]: pam_unix(crond:session): session opened for user root by (uid=0)
Nov 02 11:01:01 philip-linux /USR/SBIN/CROND[967]: (root) CMD (run-parts /etc/cron.hourly)
Nov 02 11:01:01 philip-linux /USR/SBIN/CROND[966]: pam_unix(crond:session): session closed for user root
Nov 02 11:23:13 philip-linux dbus-daemon[251]: dbus[251]: [system] Activating via systemd: service name='org.freedesktop.hostname1' unit='db
Nov 02 11:23:13 philip-linux dbus[251]: [system] Activating via systemd: service name='org.freedesktop.hostname1' unit='dbus-org.freedesktop
Nov 02 11:23:13 philip-linux systemd[1]: Starting Hostname Service...
Nov 02 11:23:13 philip-linux dbus-daemon[251]: dbus[251]: [system] Successfully activated service 'org.freedesktop.hostname1'
Nov 02 11:23:13 philip-linux dbus[251]: [system] Successfully activated service 'org.freedesktop.hostname1'
Nov 02 11:23:13 philip-linux systemd[1]: Started Hostname Service.
Nov 02 11:33:58 philip-linux sudo[1163]: philip : TTY=pts/0 ; PWD=/home/philip ; USER=root ; COMMAND=/usr/bin/systemctl status smbd
Nov 02 11:33:58 philip-linux sudo[1163]: pam_unix(sudo:session): session opened for user root by philip(uid=0)
Nov 02 11:33:59 philip-linux sudo[1163]: pam_unix(sudo:session): session closed for user root
Nov 02 11:34:23 philip-linux sudo[1165]: philip : TTY=pts/0 ; PWD=/home/philip ; USER=root ; COMMAND=/usr/bin/systemctl status nmbd
Nov 02 11:34:23 philip-linux sudo[1165]: pam_unix(sudo:session): session opened for user root by philip(uid=0)
Nov 02 11:34:24 philip-linux sudo[1165]: pam_unix(sudo:session): session closed for user root
Nov 02 11:45:38 philip-linux dbus-daemon[251]: dbus[251]: [system] Rejected send message, 2 matched rules; type="method_return", sender=":1.
Nov 02 11:45:38 philip-linux dbus[251]: [system] Rejected send message, 2 matched rules; type="method_return", sender=":1.1" (uid=0 pid=249
Nov 02 11:53:27 philip-linux dbus-daemon[251]: dbus[251]: [system] Rejected send message, 2 matched rules; type="method_return", sender=":1.
Nov 02 11:53:27 philip-linux dbus[251]: [system] Rejected send message, 2 matched rules; type="method_return", sender=":1.1" (uid=0 pid=249
Nov 02 12:01:01 philip-linux /usr/sbin/crond[1356]: pam_unix(crond:session): session opened for user root by (uid=0)
Nov 02 12:01:01 philip-linux /USR/SBIN/CROND[1357]: (root) CMD (run-parts /etc/cron.hourly)
Nov 02 12:01:01 philip-linux /USR/SBIN/CROND[1356]: pam_unix(crond:session): session closed for user root
Nov 02 12:13:25 philip-linux sudo[1475]: philip : TTY=pts/0 ; PWD=/home/philip ; USER=root ; COMMAND=/usr/bin/journalctl
Nov 02 12:13:25 philip-linux sudo[1475]: pam_unix(sudo:session): session opened for user root by philip(uid=0)
...skipping...
Nov 02 10:39:18 philip-linux systemd[1]: Starting Disk Manager...
Nov 02 10:39:18 philip-linux udisksd[577]: udisks daemon version 2.0.0 starting
Nov 02 10:39:18 philip-linux dbus-daemon[251]: dbus[251]: [system] Successfully activated service 'org.freedesktop.UDisks2'
Nov 02 10:39:18 philip-linux dbus[251]: [system] Successfully activated service 'org.freedesktop.UDisks2'
Nov 02 10:39:18 philip-linux udisksd[577]: Acquired the name org.freedesktop.UDisks2 on the system message bus
Nov 02 10:39:18 philip-linux systemd[1]: Started Disk Manager.
Nov 02 10:39:20 philip-linux dbus-daemon[251]: dbus[251]: [system] Activating via systemd: service name='org.freedesktop.Accounts' unit='acc
Nov 02 10:39:20 philip-linux dbus[251]: [system] Activating via systemd: service name='org.freedesktop.Accounts' unit='accounts-daemon.servi
Nov 02 10:39:20 philip-linux systemd[1]: Starting Accounts Service...
Nov 02 10:39:20 philip-linux accounts-daemon[598]: started daemon version 0.6.25
Nov 02 10:39:20 philip-linux dbus[251]: [system] Successfully activated service 'org.freedesktop.Accounts'
Nov 02 10:39:20 philip-linux dbus-daemon[251]: dbus[251]: [system] Successfully activated service 'org.freedesktop.Accounts'
Nov 02 10:39:20 philip-linux systemd[1]: Started Accounts Service.
Nov 02 10:39:20 philip-linux gnome-keyring-daemon[420]: keyring alias directory: /home/philip/.local/share/keyrings
Nov 02 10:39:20 philip-linux polkitd[268]: Registered Authentication Agent for unix-session:2 (system bus name :1.55 [/usr/bin/gnome-shell],
Nov 02 10:39:23 philip-linux gnome-keyring-daemon[420]: Gkm: unsupported key algorithm in certificate: 1.2.840.10045.2.1
Nov 02 10:39:23 philip-linux gnome-keyring-daemon[420]: Gkm: unsupported key algorithm in certificate: 1.2.840.10045.2.1
Nov 02 10:39:23 philip-linux gnome-keyring-daemon[420]: Gkm: unsupported key algorithm in certificate: 1.2.840.10045.2.1
Nov 02 10:39:23 philip-linux gnome-keyring-daemon[420]: Gkm: unsupported key algorithm in certificate: 1.2.840.10045.2.1
Nov 02 10:39:23 philip-linux gnome-keyring-daemon[420]: Gkm: unsupported key algorithm in certificate: 1.2.840.10045.2.1
Nov 02 10:39:23 philip-linux gnome-keyring-daemon[420]: Gkm: unsupported key algorithm in certificate: 1.2.840.10045.2.1
Nov 02 10:39:23 philip-linux gnome-keyring-daemon[420]: Gkm: unsupported key algorithm in certificate: 1.2.840.10045.2.1
Nov 02 10:39:23 philip-linux gnome-keyring-daemon[420]: Gkm: unsupported key algorithm in certificate: 1.2.840.10045.2.1
Nov 02 10:39:23 philip-linux gnome-keyring-daemon[420]: Gkm: unsupported key algorithm in certificate: 1.2.840.10045.2.1
Nov 02 10:39:23 philip-linux gnome-keyring-daemon[420]: Gkm: unsupported key algorithm in certificate: 1.2.840.10045.2.1
Nov 02 10:41:27 philip-linux dbus-daemon[251]: dbus[251]: [system] Activating via systemd: service name='org.freedesktop.hostname1' unit='db
Nov 02 10:41:27 philip-linux dbus[251]: [system] Activating via systemd: service name='org.freedesktop.hostname1' unit='dbus-org.freedesktop
Nov 02 10:41:27 philip-linux systemd[1]: Starting Hostname Service...
Nov 02 10:41:27 philip-linux dbus-daemon[251]: dbus[251]: [system] Successfully activated service 'org.freedesktop.hostname1'
Nov 02 10:41:27 philip-linux dbus[251]: [system] Successfully activated service 'org.freedesktop.hostname1'
Nov 02 10:41:27 philip-linux systemd[1]: Started Hostname Service.
Nov 02 10:42:30 philip-linux sudo[876]: philip : TTY=pts/0 ; PWD=/home/philip ; USER=root ; COMMAND=/usr/bin/journalctl
Nov 02 10:42:30 philip-linux sudo[876]: pam_unix(sudo:session): session opened for user root by philip(uid=0)
Nov 02 10:42:35 philip-linux sudo[876]: pam_unix(sudo:session): session closed for user root
Nov 02 10:53:18 philip-linux systemd[1]: Starting Cleanup of Temporary Directories...
Nov 02 10:53:18 philip-linux systemd-tmpfiles[958]: stat(/run/user/1000/gvfs) failed: Permission denied
Nov 02 10:53:18 philip-linux systemd[1]: Started Cleanup of Temporary Directories.
Nov 02 11:01:01 philip-linux /usr/sbin/crond[966]: pam_unix(crond:session): session opened for user root by (uid=0)
Nov 02 11:01:01 philip-linux /USR/SBIN/CROND[967]: (root) CMD (run-parts /etc/cron.hourly)
Nov 02 11:01:01 philip-linux /USR/SBIN/CROND[966]: pam_unix(crond:session): session closed for user root
Nov 02 11:23:13 philip-linux dbus-daemon[251]: dbus[251]: [system] Activating via systemd: service name='org.freedesktop.hostname1' unit='db
Nov 02 11:23:13 philip-linux dbus[251]: [system] Activating via systemd: service name='org.freedesktop.hostname1' unit='dbus-org.freedesktop
Nov 02 11:23:13 philip-linux systemd[1]: Starting Hostname Service...
Nov 02 11:23:13 philip-linux dbus-daemon[251]: dbus[251]: [system] Successfully activated service 'org.freedesktop.hostname1'
Nov 02 11:23:13 philip-linux dbus[251]: [system] Successfully activated service 'org.freedesktop.hostname1'
Nov 02 11:23:13 philip-linux systemd[1]: Started Hostname Service.
Nov 02 11:33:58 philip-linux sudo[1163]: philip : TTY=pts/0 ; PWD=/home/philip ; USER=root ; COMMAND=/usr/bin/systemctl status smbd
Nov 02 11:33:58 philip-linux sudo[1163]: pam_unix(sudo:session): session opened for user root by philip(uid=0)
Nov 02 11:33:59 philip-linux sudo[1163]: pam_unix(sudo:session): session closed for user root
Nov 02 11:34:23 philip-linux sudo[1165]: philip : TTY=pts/0 ; PWD=/home/philip ; USER=root ; COMMAND=/usr/bin/systemctl status nmbd
Nov 02 11:34:23 philip-linux sudo[1165]: pam_unix(sudo:session): session opened for user root by philip(uid=0)
Nov 02 11:34:24 philip-linux sudo[1165]: pam_unix(sudo:session): session closed for user root
Nov 02 11:45:38 philip-linux dbus-daemon[251]: dbus[251]: [system] Rejected send message, 2 matched rules; type="method_return", sender=":1.
Nov 02 11:45:38 philip-linux dbus[251]: [system] Rejected send message, 2 matched rules; type="method_return", sender=":1.1" (uid=0 pid=249
Nov 02 11:53:27 philip-linux dbus-daemon[251]: dbus[251]: [system] Rejected send message, 2 matched rules; type="method_return", sender=":1.
Nov 02 11:53:27 philip-linux dbus[251]: [system] Rejected send message, 2 matched rules; type="method_return", sender=":1.1" (uid=0 pid=249
Nov 02 12:01:01 philip-linux /usr/sbin/crond[1356]: pam_unix(crond:session): session opened for user root by (uid=0)
Nov 02 12:01:01 philip-linux /USR/SBIN/CROND[1357]: (root) CMD (run-parts /etc/cron.hourly)
Nov 02 12:01:01 philip-linux /USR/SBIN/CROND[1356]: pam_unix(crond:session): session closed for user root
Nov 02 12:13:25 philip-linux sudo[1475]: philip : TTY=pts/0 ; PWD=/home/philip ; USER=root ; COMMAND=/usr/bin/journalctl
Nov 02 12:13:25 philip-linux sudo[1475]: pam_unix(sudo:session): session opened for user root by philip(uid=0)

[Solved]Can't get past "Starting network" during installation from USB

I'm trying to do a fresh install of Archlinux on my laptop, following the Beginners Guide. However, I never get to the shell prompt because the installation gets stuck at "Starting network [Busy]".
These are steps I followed:
- I downloaded the latest Arch ISO.
- I wrote it to a usb stick ("Kingston Data Traveler") with "dd if=archlinux.iso of=/dev/sdb"
- I put the usb stick into my laptop (HP Pavilion dm1-4139sd), and booted it. I chose "x86_64". Everything seems to go fine, the only warning I get is: "microcode: failed to load file amd-ucode/microcode_amd.bin".
- I get the message "INIT: Entering runlevel: 3" and "Starting Syslog-NG [Done]", after that its endlessly (at least 20 minutes) stuck on "Starting network [Busy]".
I tried the following variations on the above:
- Wrote the ISO to a different USB, samen problem.
- Tried it with a different Arch version (from August), same problem.
- Turned kvm on and off, same problem.
- Pressed TAB at the "x86_64" line and added "acpi=off" to the end of it. I then get:
:: Triggering uevents....
[ 19.697932 ] usb 1-1: device not accepting address 2, error -110
:: Mounting '/dev/disk/by-label/ARCH_201209' to '/run/archiso/bootmnt'
Waiting 30 seconds for device /dev/disk/by-label/ARCH_201209
[ 35.312165 ] usb 1-1: device not accepting address 3, error -110
[ 45.821422 ] usb 1-1: device not accepting address 4, error -110
[ 56.330681 ] usb 1-1: device not accepting address 5, error -110
[ 56.330681 ] hub 1-0:1.0: unable to enumerate USB devices on port 1
ERROR: '/dev/disk/by-label/ARCH_201209' device did not show up after 30 seconds....
Falling back to interactive prompt
You can try to fix the problem manually, log out when you are finished
sh: can't access tty; job control turned off
[rootfs /]#
I'm not sure what to do in this prompt. At least the network isn't working and none of the normal commands.
- I reset the DHCP leases on my modem, same problem.
- I turned off/on the hardware WLAN, same problem.
- I tried it with or without the LAN cable plugged in, same problem.
- I tried it with or without the battery plugged in, and with or without the power cable plugged in. Same problem.
I also performed the Arch memory test, and the bios hard disk test. They both report no errors.
I did an Arch installation a month ago on this laptop, and back then it didn't have this problem. I still have that arch installed from back then and it boots/works without problem (I have Starting NetworkingManager [Done]). I know I technically don't need to install arch again, as I still have the old one, but I wanted to clean the changes I made to some settings files and I if it turns out this is some kind of hardware problem I'd like to return it to the store.
Please help! I'm not really that familiar with Linux in general, so it might have been a very basic mistake from me as well. I have no idea what to do next, except for formatting my harddisk (which I don't think should influence the installer?), or trying to install a different Linux distro.
Edit: The solution that solved this problem for me in the end was resetting the BIOS to its defaults.
Last edited by dbakker (2012-09-15 11:28:14)

DSpider wrote:Did you check the MD5 checksum? If you downloaded it using a BitTorrent client, then you don't need to (its hash is checked during downloading).
Yes, I downloaded it using BitTorrent and the MD5 matches.
DSpider wrote:Try a different stick?
Yes, I tried it with 2 different USB sticks. They are both from the same brand ("Kingston DataTraveler"), so I might try different brands as well, but I don't think it is the problem.
DSpider wrote:Or at least a different method from that wiki page. For example, "dd"-ing it should work just fine.
The methods for writing the ISO that I tried so far:
The base method:
dd if=archlinux.iso of=/dev/sdb
(from an Arch install)
The method without overwriting your USB drive (created a FAT32 drive with an VFAT filesystem, from an arch install)
Using Imagewriter (from Windows)
Each method gives the same result: the laptop gets stuck at "Starting network [Busy]" when booted from one of the USB sticks. My modem indicates that it "sees" the laptop, but that the laptop has no established connection. When the laptop is stuck at the "Starting network [Busy]", all the activity on the USB stick stops (the light stops flashing).
The thing I find most strange is that the OS currently installed on the laptop has no problems booting or accessing the internet (both wired and wireless) at all.

Update on windows 10 preview version 10130 blue screens with f-secure as cause supplied by talktalk

As soon as 10130 starts up blue screen critical process died the f-secure is supplied by talktalk version Super Safe Boost 2.21 build 285CCF CUIF 10.03 build 258
CCF DAAS2 1.10 build 369
CCF Guts2 2.01 build 418
CCF Upstream 2.01 build 980
CCF Diagnostics 8.01 build 924
CCF Scanning 1.51 build 112.309
CCF Network 1.03 build 102
CCF Reputation 2.0 build 1337 as soon as install is about to complete Blue Screen critical-process-died But as windows 10 no longer has F8 to enter safe mode and unable to do msconfig either it would leave a novice user with useless Computer. PS i had re-enabled F8 option so was able to do restore back having taken a checkpoint before adding the anti-virus also it left the pc in a mess and i had to do a chkdsk /F to recover the pc correctly as windows 10 was just like safe mode with no apps apart fromt event viewer and Run so able to do CMD.EXE and recover the situation i even re-installed the latest 10130 iso to guarantee a clean situation and again as soon as f-secure is installed it blue screens and can not be uninstalled as instalaion shows installed but as had nor completed will only remove icon all previous releases worked as i was testing office 2003, photoshop etc as wanted to ensure migration from windows 7 to 10 would be uneventfull running in dual boot mode ------------------------------- how can i debug this problem . event viewer shows 3 errors------------------------------------------------------------------------Fault bucket , type 0Event Name: WindowsUpdateFailure3Response: Not availableCab Id: 0Problem signature:P1: 10.0.10074.0P2: 800b0101P3: F4932C69-501D-49CA-B507-0DF0531CB356P4: DownloadP5: 202P6: 0P7: 0P8: Dynamic UpdateP9: {7971F918-A847-4430-9279-4A52D1EFE18D}P10: 0Attached files:These files may be available here:　Analysis symbol:Rechecking for solution: 0Report ID: 3a290198-0a02-11e5-ab6f-0016448c363fReport Status: 262144Hashed bucket:------------------------------------------------------------------------------ Fault bucket , type 0Event Name: WindowsUpdateFailure3Response: Not availableCab Id: 0Problem signature:P1: 10.0.10074.0P2: 800b0101P3: F4932C69-501D-49CA-B507-0DF0531CB356P4: DownloadP5: 202P6: 0P7: 0P8: Dynamic UpdateP9: {7971F918-A847-4430-9279-4A52D1EFE18D}P10: 0Attached files:C:\WINDOWS\Temp\WER15AB.tmp.WERInternalMetadata.xmlThese files may be available here:C:\ProgramData\Microsoft\Windows\WER\ReportQueue\NonCritical_10.0.10074.0_514ab7a9a8ce992752eb54e1dd1412dafd33beb5_00000000_cab_110415cbAnalysis symbol:Rechecking for solution: 0Report ID: 3a290198-0a02-11e5-ab6f-0016448c363fReport Status: 4Hashed bucket:------------------------------------------------------------------------------------- Fault bucket 91736524612, type 5Event Name: WindowsUpdateFailure3Response: Not availableCab Id: 0Problem signature:P1: 10.0.10074.0P2: 800b0101P3: F4932C69-501D-49CA-B507-0DF0531CB356P4: DownloadP5: 202P6: 0P7: 0P8: Dynamic UpdateP9: {7971F918-A847-4430-9279-4A52D1EFE18D}P10: 0Attached files:C:\WINDOWS\Temp\WER15AB.tmp.WERInternalMetadata.xmlThese files may be available here:C:\ProgramData\Microsoft\Windows\WER\ReportArchive\NonCritical_10.0.10074.0_514ab7a9a8ce992752eb54e1dd1412dafd33beb5_00000000_111c1bb6Analysis symbol:Rechecking for solution: 0Report ID: 3a290198-0a02-11e5-ab6f-0016448c363fReport Status: 0Hashed bucket: e0ac3ecdf8185ff6d24e9c67904da683 maybe the version supplied to talktalk has a flaw which you have fixed and talktalk need a new version

Hi
Currently all versions of F-Secure Internet Security / SAFE will bluescreen with Windows 10 starting from Windows 10 build 10130. Only the beta version of F-Secure SAFE ("fs protection") is compatible.
We know what is causing the problem and are working on maintenance releases. The products will be updated before Windows 10 launches.
Ville
(F-Secure R&D)

Rt61 Wireless no longer works in 2.6.34

This is related to https://bbs.archlinux.org/viewtopic.php?id=99117
I'm having the same problem, but what fixed the OP's problem didn't fix mine. To summarize, the base arch setup has wifi working just fine in the 2.6.33 kernel that came with the latest core iso. Once I did a pacman -Syu and updated to 2.6.34, wireless is no longer working. It can scan for SSIDs, but it cannot connect. It times out. I'm using netcfg with basic authentication. Tailing everything.log, I see this:
kernel: wlan0: direct probe to <my ap> (try 1)
kernel: wlan0: direct probe to <my ap> (try 2)
kernel: wlan0: direct probe to <my ap> (try 3)
kernel: wlan0: direct probe to <my ap> timed out
I installed linux-firmware, and the system is finding /lib/firmware/rt2561s.bin just fine. Are there any known issues with the rt2561s/rt61 wireless cards and the 2.6.34 kernel? Are there other things I can try?
Thanks,
Joe
Last edited by joemccall86 (2010-08-11 03:40:57)

Thank you for everyone's assistance
I actually figured out what the problem was, like most issues it comes back to operator error, it seem I had inadvertently chose a "rename file on import" template that I had set up to name the files based on a custom fill-in field in the Meta Data, I normally only used that template when I was exporting images that had been completely edited, so being these images were new imports that field was blank, hence it would import the first image and then do to " don't import subjected duplicates" being checked it would just stop the import process.

[SOLVED] Windows 8.1, lost Arch boot loader, cannot reinstall or boot

Hi all,
Apologies but I am only posting as I have exhausted my (admittedly quite limited) knowledge and have spent hours trying to get it back up and running but nothing seems to work at all. This will probably be quite long, apologies if there is something really obvious that I have missed on the Wiki or anywhere, but I'm only posting as I can't seem to get anywhere with it at all despite reading and trying.
Essentially I had a Toshiba Satellite p850-321 laptop (UEFI, secure boot off, fast boot off) which I had dual booting with Windows 8 and Arch using rEFInd. I then had several moments of madness, starting when for some reason - on very little sleep so didn't think - decided to upgrade Windows 8 to 8.1. Unsurprisingly (but a surprise for me at the time), it then booted straight into Windows 8.1, no rEFInd. In hindsight, it had probably just set itself as boot priority but I thought it had overwritten rEFInd with its own bootloader or set it back to default or something so started on a way to try and get it back.
I then spent many hours trying to get my old bootable Arch USB stick to work with no joy, updating it to the latest arch iso and all sorts. It eventually worked when I updated the laptop BIOS. Booted from the USB, chrooted into arch, reinstalled rEFInd, played around, eventually got it to reboot and display rEFInd but Arch wouldn't start. At this point I noticed that my fstab looked strange (devices/labels mixed up from what I expected), so followed the Beginner's Guide again and recreated the fstab. My disk is partitioned as follows (main partitions of note):
/dev/sda2 - Windows EFI partition
/dev/sda4 Windows 8.1
/dev/sda6 arch swap partition (archswap)
/dev/sda7 arch root partition (archroot)
/dev/sda8 arch home partition (archhome)
Couldn't get rEFInd to work so decided to start again with gummiboot. Installed gummiboot, followed Beginner's Guide to install and configure it. Edited arch.conf and after having to mess about with the location of vmlinuz-arch.efi in the conf file, I have the options part looking like this:
options root=/dev/sda7 rw
Now gummiboot loads on startup but all I get on trying to load Arch from gummiboot is the dreaded:
ERROR: device '' not found. Skipping fsck
ERROR: Unable to find root device ''.
I've tried changing the root in options in arch.conf to UUID, PARTUUID and even different partitions (just to see what happened...) - the same. Is it likely to be due to me recreating the fstab and something is messed up there?
Another problem is that now, whatever I do, I cannot boot from the USB again to get in to even try to fix anything. The laptop on boot just hangs for a while and then loads the gummiboot from the disk drive rather than from the USB (I've set the boot priority, everything) and nothing will allow me to boot from the USB. That is probably a secondary issue, I can probably try to reinstall the BIOS again and see if that helps.
If anyone has had anything similar and has any solutions I'd be really grateful - anything. I don't mind being shown to be incredibly stupid, I get that a lot so have a lot of experience! - just anything that can get me back into Arch again without having to reinstall from scratch!
Thanks.
Last edited by pilf (2013-11-02 19:45:44)

Thanks for replying, very much appreciated. The partitions were numbered sequentially, I only posted up the partitions that I thought were of interest to the issue (which wasn't very helpful!). The partitions are as follows:
Partition No Type
1 Win Recover
2 EFI System (EFI partition)
3 Microsoft Reserved
4 Microsoft Basic (Windows 8.1 installation)
5 Windows Recover
6 Linux Swap
7 Microsoft Basic (Arch root partition)
8 Microsoft Basic (Arch home partition)
9 Windows Recover
It looks like I have managed to solve it, but I admit I'm not sure what of the several changes I made that solved it. I managed to boot into the USB arch disk by resetting my BIOS back to defaults and then changing the boot order back, which was the only way it would boot the USB - without resetting back and putting the boot order back exactly how it was before it wouldn't boot from the USB. Anyway...
Checked the partitions with gdisk, no problems. I did sort the partitions as you mentioned, just in case. Changed the partition names using gdisk to the same names I had before (archroot, archhome, archswap). Changed the types from Microsoft Basic to Linux filesystem (partitions 7 and 8) and wrote the partition.
Mounted everything, chrooted, edited the gummiboot arch.conf file and noticed there were some strange characters in it, a forward slash before /root in the options for example. I had edited the arch.conf file from windows by booting into Windows, mounting the EFI partition (mountvol z: /s) and editing it that way, which would have messed up the formatting. It can't have only been that though as it wasn't booting anyway which is why I went into Windows to edit the file in the first place. Corrected the arch.conf file, rebooted and it booted. Some errors on boot which I need to correct but I can work on those as it boots into my arch installation.
So all solved. I thought I'd update just to say thanks for the advice and in case it helps anyone else in the future.

Latest releng ISO's

Similar Messages

Maybe you are looking for