Latest retina Macbook with GT750M - CUDA not available?

How can I get AE 12.2.1.5 (trial version) to use my Nvidea GT750m in my late 2013, 15 inch macbook pro (16 GB, all options ticked) for raytracing and other tasks AE can assign to the GPU? I am using the trial version of AE because I need to see it work before I get a year contract.
I would assume that the latest version of AE should run flawlessly on the latest and highest specced retina Macbook pro?
On start-up I get the warning that ray tracing is not enabled because it requires Cuda 5.0 or later.
Also, under preferences/preview/GPU information AE claims that I do only have CUDA 1.0 installed.
But I have the latest Cuda driver (5.5.47) installed. GPU driver is: 8.24.9 310.40.25f01
My macbook runs Mavericks (OS 10.9.2)
Under preferences/preview/GPU information the following information is displayed: 
Fast Draft: Available
Texture Memory: 818 MB [...]
Ray-tracing: CPU [GPU option is greyed out]
[enable untested, unsupported GPU for CUDA ... greyed out]
(GPU not available - incompatible device or Cuda driver)
OpenGL
[...] Device: Nvidea Geforce GT 750M Open GL Engine,
Version: 2.1 NVIDEA-8.24.9 310.40.25f01
Total Memory: 2.0 GB
Shader Model: -
CUDA
Driver version: 1.0 (5.0 or later required) [Note: this is wrong I have the latest CUDA driver installed - AE cannot see it, though]
Devices: -
Any advice is greatly appreciated!

Make sure you have installed the latest Cuda Driver, your OS is up to date, and that you have checked the box that says "Enable untested, unsupported GPU. . ." because the GPU in the new MacBook Pro R was introduced after it was decided to not continue down the Ray-traced rendering engine path and focus on integration with other 3-D Apps.

Similar Messages

  • After migrating to a retina macbook with mountain lion I can not play windows media player files with flip4mac anymore

    After migrating to a retina macbook with mountain lion I can not play windows media player files anymore. I use flip4mac pro 3.0 and quicktime 7.6.6.
    The message I receive is: De bewerking kan niet worden voltooid. (OSStatus fout -50). I also have problems with zip files that can not be saved on the desktop anymore while unzipping.

    I actually installed Quicktime pro and Flip4Mac Pro again after I bought the Retina Macbook. Today I did it again but still get the same OSStatus error -50. I guess there is some old file that has to be removed. Flip4Mac comes with an uninstaller. Quicktime does not.
    I read that his could be something with security that is why I mention the problem with the zip files as well.

  • I am trying to import my cd's onto itunes on a new macbook pro. i can import the cd fine but can not get track names or album art work. after going into advanced it is just coming up with "CDDB information not available"

    i can import the cd fine but can not get track names or album art work. after going into advanced it is just coming up with "CDDB information not available"
    thank you

    Use the trackpad to scroll, thats what it was designed for. The scroll bars automatically disappear when not being used and will appear if you scroll up or down using the trackpad.
    This is a user-to-user forum and most people will post on here if they have problems. You very rarely get people posting to say there update went smooth. The fact is the vast majority of Mountain Lion users will not be experiencing any major problems with the OS, or maybe with apps which are not compatible, but thats hardly Apple's fault if developers don't update their apps.

  • When will the iPad with retina display with wifi   cellular be available in Australia

    when will the iPad with retina display with wifi   cellular be available in Australia

    http://store.apple.com/au/buy/home/shop_ipad/family/ipad
    It already is. Estimated shipping time of 1-3 business days

  • Communiocation channel: Value with name asmaBaseFileName not available

    Hi friends,
    After upgrade our Dev system to PI 7.1. Whne i try to start the communication channels  from Communication channel monitoring.
    I am getting error for all the channels as follows :
    Configuration error: Value with name asmaBaseFileName not available (Software version: 3.0.15)
    Kindly guide  me how to rectify this issue.
    Renu

    After upgrade our Dev system to PI 7.1. Whne i try to start the communication channels from Communication channel
    monitoring.
    Which metadata are the channels using...SAP PI7.0 or SAP PI7.1? If you dont import the metadata of SAP PI7.0 in the PI7.1 system then you may get an error for the communication channels....you should either change the channels to point to PI7.1 or import the metadata in ESR.
    @Kiran: The tpz reference you have given seem to be of SAP PI7.11 .... will it also work for SAP PI7.1
    Regards,
    Abhishek.

  • Macbook Pro bluetooth is not available

    Recently my MacBook Pro bluetooth became not available and I cant do any thing about it. Can anyone help me in this case ?

    HellO:
    Try resetting the PRAM and SMC.
    Barry

  • I am trying to install photoshop elements from the shop bought card. After I put in redemption code the yellow line came up with "redemption is not available at the moment". What do I do?  Please help! Many thanks

    I am trying to install photoshop elements from the shop bought card. After I put in redemption code the yellow line came up with "redemption is not available at the moment". What do I do?  Please help! Many thanks

    There's been a few of these today. I think there must be a problem with the redemption server and you probably just need to wait a while and try again.
    Cheers,
    Neale
    Insanity is hereditary, you get it from your children
    If this post or another user's post resolves the original issue, please mark the posts as correct accordingly. This helps other users with similar trouble get answers to their questions quicker. Thanks.

  • My bluetooth is with the message, not available. What happened?

    My bluetooth is with the message, not available. What happened?

    What do you mean you found no information?  Was the window blank?  Should look like this -

  • CUDA not available when trying to render with GPU

    I have a Samsung Series 7 Chronos 17" laptop running Windows 7. It has a Nvidia Optimus 650m graphics card. All of my drivers and software are up to date.
    I am trying to get CUDA working in After Effects CC so I can use GPU rendering, but when I try to, After Effects does not see it, so I can't use the GPU rendering.   According to information from Nvidia, I should be able to use CUDA.
    In a brief Google search I saw one post by a guy when putting his laptop (same as mine) through the paces couldn't use CUDA. It was disabled or unavailable or something, but I have not found a solution. Anyone have an idea what could be happening?  Is this device really not supported?
    Here's the info from AE.
    Fast Draft:
    Available
    Texture Memory:
    1616.00 MB
    Ray-tracing:
    CPU
    (GPU not available - incompatible device or display driver)
    OpenGL
    Vendor:
    NVIDIA Corporation
    Device:
    GeForce GT 650M/PCIe/SSE2
    Version:
    2.1.2
    Total Memory:
    3.94 GB
    Shader Model:
    4.0 or later
    CUDA
    Driver Version:
    Devices:
    Current Usable Memory:
    Maximum Usable Memory:
    Thanks!

    Here is some more information on my graphics card.  For GPU-Z, it detects CUDA.   
    One thing about my computer that I didn't mention, that it uses an onboard Intel HD Graphics 4000 for display purposes along with the Nvidia card.  I don't know how Samsung has it setup, but I cannot disable the Intel graphics in BIOS and if I disable the Intel drivers, my screen goes blank.  I don't think I can use only the Nvidia card. 

  • Is it possible to install Windows 7 on Retina MacBook with a shared CD drive?

    My school provides Windows 7 Ultimate upgrades to students
    My friend installed Windows 7 normally even though it's technically an upgrade (burned the .img file to a DVD using Disk Utility and installed it through the Boot Camp Assistant tool in Snow Leopard)
    I own a 2008 MacBook which has an optical drive
    I own 1, 2 GB thumb drive and 1, 4 GB thumb drive
    Is it possible to install Windows 7 through my Retina MacBook Pro through a shared CD connection with my 2008 MacBook?
    I tried using the Boot Camp Assitant tool.
    I burned the Windows 7 upgrade .img file to a DVD with Disk Utility just like my friend
    I copied that DVD as a .cdr file to my Retina MacBook using the shared CD connection and Disk Utility, and changed the file extension to .iso
    With the Boot Camp Assistant, I set-up my 4 GB thumb drive
    When I get to the "Create a Partition for Windows" screen and I press install, I get the message "The installer disc could not be found".
    The DVD is in my 2008 MacBook and I mounted it on the Retina MacBook. The 4 GB Windows set-up thumb drive is connected to the Retina MacBook.
    I'm confused as to what I'm doing wrong.
    Any help is appreciated.

    You need the USB SuperDrive or an USB disk to install Windows on the computer

  • BENQ FP241W on Retina Macbook Pro - native resolution not supported?

    Hi there,
    I have tried connecting my BENQ FP241W monitor to my new Macbook Pro with retina display via HDMI.
    The monitor appears to be displaying at only 1600x900 and looks very blurry since the native resolution of the monitor is 1920x1200. I have actually tried this with an older 2009 model macbook pro and the same thing happend, although I was using a dispaly port to HDMI adaptor and never investigated further to the reason the native resolution was not supported.
    Going back to the Retina Macbook and the BENQ FP241W. It gives the following resolution options for scaled: 1080p, 1080i and 1600x900. When I choose 1080p or 1080i it looks the same as 1600x900 i.e very blury and not even close to the sharpness that is capable of the display - true 1080p should look sharper than how it looks selected so I dont believe it is actually displaying 1080p. It also has the option for 'best for display' which I would expect it to show native resolution of 1920x1200 - unfortunately it still apears to be 1600x900.
    Can anyone help me out? Is this a driver issue or something else?
    Thanks
    Rich

    I can sort this out by just using a HDMI > DVI cable which works fine. I think there must just be an issue with the BenQ HDMI input supporting 1920x1200. Its annoying because the screen is also connected to a PC workstation by DVI so it would be good to have the HDMI for the Macbook so I can quickly switch the display by pressing a button instead of having to unplug cables...

  • [Macbook Core Duo] Bluetooth not available errors

    When working with my macbook i have discoverd my bluetooth is sometimes not available (ie. ~ through the bluetooth logo in osx).
    I noticed some things like this in the logs:
    2007-01-07 00:36:19.111 GrowlHelperApp[172] 2007-01-07 00:36:19 +0100 HardwareGrowler: USB Disconnection (IOUSBWirelessControllerDevice) - Priority 0
    2007-01-07 00:36:20.049 GrowlHelperApp[172] 2007-01-07 00:36:20 +0100 HardwareGrowler: USB Connection (IOUSBCompositeDevice) - Priority 0
    2007-01-07 00:36:21.164 GrowlHelperApp[172] 2007-01-07 00:36:21 +0100 HardwareGrowler: USB Disconnection (IOUSBCompositeDevice) - Priority 0
    2007-01-07 00:36:21.562 GrowlHelperApp[172] 2007-01-07 00:36:21 +0100 HardwareGrowler: USB Connection (IOUSBWirelessControllerDevice) - Priority 0
    Is there any know hardware error?

    I had the same problem you are having. My bluetooth would always go in and out and my computer wouldnt be able to sleep because of this problem. I finally had Apple phone support send me a box.
    Apple support sent me a box for my Macbook repair. I received the computer back 2 days later with a replaced bluetooth module and I havent had a problem since.

  • Amazon Instant Video with pipelight: HD not available (HDCP)

    On my 64-bit archlinux-laptop I am using pipelight (0.2.5-2) and wine-silverlight (1.7.14-1) to watch video-streams of my "Amazon Instant Video"-account. Before end of february 2014, the provider of the video-stream-service was called "lovefilm" (Germany) and everything worked fine on archlinux. But now, I cannot watch movies in HD anymore and get this message:
    HD viewing isn't available because the display doesn't meet content protection (HDCP) requirements. This title will continue in Standard Definition.
    Maybe, I made something wrong with my pipelight/wine-silverlight-configuration. On my Playstation for example, I have no problems with "Amazon Instant Video" and HD. I guess, on ms-windows it should work as well. By the way, I am not using an external monitor (VGA-connections can cause HDCP-errors). And as ewaller told me in an e-mail, I should mention in this forum, that my intention is not to crack any copyright-protections but only want to watch my paid movies on my laptop.
    Andreas

    Hi andreas,
    the short answer is: its not (yet) supported with Pipelight. HDCP (or content protection in general) is a feature which is not available with any Linux driver (not even the proprietary ones), and besides that some other features are missing too. Nevertheless this is on our todo-list for future versions of Pipelight, but we can't give an exact schedule, especially as it involves a lot of legal problems and questions.
    For a bit more detailed information please take a look here, where Michael Müller (one of the other developers involved in Pipelight) summarized the current status. You can also subscribe to the bug report mentioned there if you want to be informed about all news concerning this issue.
    By the way: You would encounter exactly the same problem in some situations on Windows, for example when your monitor is only connected via VGA, and thus the video data cannot be securely transmitted.
    Sebastian
    Last edited by slackner (2014-03-14 01:48:38)

  • New Retina Macbook with New OS upgrade - Cannot Boot!

    This is a new Retina Macbook purchased in August 2013.  It was working fine till I upgraded it on last week.  Since the upgrade, I have had several boot up issues.  Now it is not booting up at all.  I just get a white screen after hitting the power button. 
    Is there a safe mode boot up procedure? 
    Has anyone had a similar problem? 
    Can anyone help?

    See if these procedures help:
    http://support.apple.com/kb/ts2570
    Ciao.

  • Createdb10.sql with error "ORACLE not available"

    guys..
    I have installed PeopleTools 8.49 and PeopleSoft HRMS 9. I installed Oracle 11gR1 on OEL 5.3
    I create /oradata/DEMO111/create by my self.
    I modified file createdb10.sql
    set termout on
    set echo on
    spool createdb.log
    startup nomount pfile=$ORACLE_HOME/dbs/initDEMO111.ora
    CREATE DATABASE "DEMO111"
    MAXINSTANCES 8
    MAXLOGHISTORY 1
    MAXLOGFILES 16
    MAXLOGMEMBERS 3
    MAXDATAFILES 100
    DATAFILE '/oradata/DEMO111/datafiles/system01.dbf' SIZE 300M REUSE AUTOEXTEND ON NEXT 10240K MAXSIZE UNLIMITED
    EXTENT MANAGEMENT LOCAL
    SYSAUX DATAFILE '/oradata/DEMO111/datafiles/sysaux01.dbf' SIZE 120M REUSE AUTOEXTEND ON NEXT 10240K MAXSIZE UNLIMITED
    SMALLFILE DEFAULT TEMPORARY TABLESPACE TEMP TEMPFILE '/oradata/DEMO111/datafiles/temp01.dbf' SIZE 20M REUSE AUTOEXTEND ON NEXT
    640K MAXSIZE UNLIMITED
    SMALLFILE UNDO TABLESPACE "PSUNDOTS" DATAFILE '/oradata/DEMO111/datafiles/psundots01.dbf' SIZE 200M REUSE AUTOEXTEND ON NEXT
    5120K MAXSIZE UNLIMITED
    CHARACTER SET AL32UTF8
    NATIONAL CHARACTER SET UTF8
    LOGFILE GROUP 1 ('/oradata/DEMO111/redologs/redo01.log') SIZE 51200K,
    GROUP 2 ('/oradata/DEMO111/redologs/redo02.log') SIZE 51200K,
    GROUP 3 ('/oradata/DEMO111/redologs/redo03.log') SIZE 51200K;
    spool off
    I get ORA-01034: ORACLE not available and also ORA-00371: not enough shared pool memory, should be at least 102341017 ( below startup nomount pfile=$ORACLE_HOME/dbs/initDEMO111.ora
    I set my ORACLE_SID at /home/ora111 and I edited bash_profile. Put and export ORACLE_SID=DEMO111
    any Idea..?? please help.
    best regard.

    well thats true. I changed shared_pool_size to 112500000. Database created. Then I add :
    undo_management=auto
    undo_tablespace=PSUNDOTS
    remote_login_passwordfile=NONE.
    Q : How do we make password file like the guide said?
    I ran utlspace.sql then PSTEMP and PSDEFAULT tablespace created.
    I ran dbowner.sql then PSDBOWNER table, Index, sysnonym created. then revoke connect, resource, dba from PS.
    I ran hcddl.sql then a lot of tablespaces created. But there are some tablespaces that were error.
    The notification are same. ERROR at line 1:
    ORA-19502: write error on file "/oradata/DEMO111/psindex.dbf", block number
    153856 (block size=8192)
    ORA-27072: File I/O error
    Linux Error: 2: No such file or directory.
    Additional information: 4
    Additional information: 153856
    Additional information: 839680
    Q: Do you get same error? Is it about block number or block size?
    I continued to run psroles.sql PSUSER role and PSADMIN role created. Also Grant succeeded.
    I continued to run psadmin.sql twice because I miss the name. Second time I runned psadmin.sql, I put SYSADM as Peoplesoft Owner ID and PS as Peoplesoft Owner ID Password.
    Q: What is Peoplesoft Owner ID Password? We create the Peoplesoft Owner ID Password in this running or it already created before.?
    I continued to run connect.sql.
    I cannot alter system set NLS_LENGTH_SEMANTICS=CHAR scope=both; But I can create spfile (I copy initDEMO111.ora to /apps/oracle/admin/DEMO111/pfile )
    I install peopletools 8.49 first and peoplesoft HRMS 9 at the same directory on Window XP. ( c:\apps\psoft\hrms9)
    but when I compare with your steps, it's different from this picture. I go to All Programs, I just see Peopletools 8.49 there.
    http://2.bp.blogspot.com/_GAPqu9CUk1k/R4aT2fOgWiI/AAAAAAAAAN4/WYYq8JdsAfw/s1600-h/1ScreenShot001_LoadAppl.jpg
    I go to Configuration Manager on my client computer, connect password is disable. What can I do for this
    When I installed peopletools 8.49 ( both on Window XP and OEL 5.3), the installer did not ask for cd 2 to cd 7. I just runned cd 1, and it said "installShield wizard successfully installed...." It should skip the cd 5 on Windows XP, the installer did not ask the cd 2 and the rest. What's wrong?
    (I just re-formated my computer with OEL 5.3 and installed again from tuxedo)
    well, I just downloaded Oracle Client 11gR1 and installed with Administrator Type.
    Q: How we connect to database server with Oracle Client like you said before that I will need Oracle Client runtime installation..?
    hope you can help. :)
    best Regard.

Maybe you are looking for