Latest Start and Requested Edn

Hi,
I know clearly about latest end and requested start.
Why again we need latest start and requested end ?

You don't need them, they are there if you want them.
Latest start = time that you want work on the workitem started by
Requested end = a "soft" latest end

Similar Messages

Send email notification in latest start and latest end

Hi all,
My requirement is to send email notification on latest start and latest end. For latest start, a notification needs to be sent to the manager asking him to start processing the Leave request.
Am not too concerned about the latest end, since the latest end takes the workitem(MODELED ACtion) to the next manager, where I can insert a email step in the workflow.
My concern is how can i send an email to the manager if he has not started processing the lave request within say 3 days
thanks a ton.
regards

Hi,
If you are looking to send notification ASA work item reaches a latest end then follow the below steps.
1. Open the step for which you have set the latest end and click latest end tab.
2. Under the same tab you will find a Drop down box you will find two entries 1 Display Text 2 Modeled choose the 1 option. and define the text in the task description by choosing Latest End description.
3. Choose the container element you might have populated the email address.
Now the configuration that you need to make sure to send a mail to external email id is SCOT settings if SMTP node is configured then this node would be sending mails to the
Regards
Pavan

Capture Latest start and latest end - date and time through PI category.

Hi Guys,
I want to capture latest start and latest date and time of each of the individual phases through PI categories. i.e these values should flow from process order.What characteristic do i have to include? I know PPPI_EVENT_DATE and time will not work for this.

Thanks for your response Avinash.
Btw, I have viewed all these notes 368289.1, 603233.1, 399056.1, 329692.1, 1146414.1 already, but these don't seem to solve my problem because in each of these are under assumption that the initial Joining Date of the employee (i.e. Effective Start Date and Latest Start Date) is entered correctly without an issue, and these notes talk about dealing with 'Updating or Correcting' the data.
But In my case the pre-conditions are different, although those are making the system to respond in the same way (i.e. showing same error) some how.
As far as deleting the employees is concerned, yes that could be one option, but I am not really sure about adapting this solution as the dates I used in my case were just example dates, and in actual these employees are created almost 1 month back and they are already used in Projects module, CRM module and others.

Deadline moniter - Dynamic latest start / latest end date and time

Hi all,
My requirement is to have the latest start and latest end time made dynamic. This is because each Personnel area or business unit has different requirements as to when they the notification and escalation to happen.
For example -
Business unit 1 wants escalation to happen after 5 days where as Business unit 2 wants escalation in 2 days itself.
Any ideas here

Hi,
You can create a method in your BO to calculate the date for calculating deadline and pass it on to the workflow .....
Calculate the date as per your requirement and later populate it in the deadline step using the EXP expression
for eg. if you have 5 days calculate the date as per 5 days and time 1 min etc...
Regards
Gautam
Edited by: gautam maini on Aug 18, 2011 9:06 PM

Earliest/Latest start - Earliest/Latest finish in master recipe scheduling

Hi everybody,
I'm struggling here to understand why only phases 0061 and 0071 have different earliest and latest starts and finishes.
This is a very simple example with all the relevant phases being set for a 1 hr duration.
This is a sequencial process (0011 - 0021 - 0031 - 0051 - 0061 - 0071 - 0081), except phases 0041 and 0091, which are not relevant for the analysis.
These are the relations of phase 0061:
And these are the relations of phase 0071:
Any idea about what else could I check?
Regards
Fernando

Hi Caetano.
This example uses backward scheduling.
What I don't understand is the different earliest and latest start time for phase 0071 and 0061.
My screenshot shows a example of a master recipe scheduling having as finish date 28/03. So, following a backward scheduling way:
phase 0091: not relevant (duration = zero)
phase 0081: duration = 1 hour. Finish = 24:00:00 / Start = 23:00:00 (for both earliest and latest dates)
phase 0071: duration = 1 hour. But then, latest finish = 23:00:00 and earliest finish = 22:00:00 ...
back to phase 0051 you can see that this doesn't happen.
Basically what I don't get is:
If the operations have a duration of 1 hour each, why latest start of phase 0061 is 21:00:00 and the latest finish of phase 0050 is 20:00:00 and not 21:00:00 ?
Regards
Fernando Luz

I have a mid 2007 iMac.    2 GHz Intel Core 2 Duo, 4 GB 667MHz DDR2 SDRAM, OSX 10.9.5.   I attempted to do the latest update and got the message: Start up disk is full. Delete files. How do I do that?

I have a mid 2007 iMac.    2 GHz Intel Core 2 Duo, 4 GB 667MHz DDR2 SDRAM, OSX 10.9.5.   I attempted to do the latest update and got the message: Start up disk is full. Delete files. How do I do that?

Freeing Up Space on The Hard Drive
1. See Lion/Mountain Lion/Mavericks' Storage Display.
2. You can remove data from your Home folder except for the /Home/Library/ folder.
3. Visit The XLab FAQs and read the FAQ on freeing up space on your hard drive.
4. Get an external hard drive on which to store some of your files after which you can
      erase the data from your internal drive to free up space.
5. Also see Freeing space on your Mac OS X startup disk.
6. See Where did my Disk Space go?.
7. See The Storage Display.
You must Empty the Trash in order to recover the space they occupied on the hard drive.
You should consider replacing the drive with a larger one. Check out OWC for drives, tutorials, and toolkits.
Try using OmniDiskSweeper 1.8 or GrandPerspective to search your drive for large files and where they are located.

I chose an option which eliminated the word Bookmarks from my start page menu, and of course all of the rest. i wish ti return to the original default, but see no option to do this. currently i see: most visited,getting started and latest headlines, which

i chose an option which replaced 'bookmarks' in the menu with most visited, getting started and latest headlines. I want to go back to the default, simply 'Bookmarks' How do I do this?

'''Can't see the Menu Bar''' (File, Edit, View, History...Help)? Hold down the key ( key in OSX) and press the following letters in this exact order: V T M
The Menu Bar should now be displayed permanently, unless you turn it off again (View > Toolbars). Turning the Menu Bar on and off is a new feature in version 3.6.
See: http://support.mozilla.com/en-US/kb/Menu+bar+is+missing
'''See other Toolbars''' under View > Toolbars. Clicking on one of them will place a check mark (display) or remove the check mark (not displayed).
'''To display the Status Bar''', View, then click Status bar to place a check mark (display) or remove the check mark (not displayed).
'''Full Screen mode'''
http://kb.mozillazine.org/Netbooks#Full_screen
Also see:
''' [[Back and forward or other toolbar buttons are missing]]'''
'''[[Navigation Toolbar items]]'''

I downloaded the latest itunes and i recieved a message that the apple mobile device failed to start. It asks me to verify that I have sufficient privileges to start system services. What does this mean and how do I fix this so computer will sync iphone

i downloaded the latest itunes and i recieved a message that the apple mobile device failed to start. It asks me to verify that I have sufficient privileges to start system services. What does this mean and how do I fix this so computer will sync iphone?

You need to follow the instructions of tt2 in https://discussions.apple.com/thread/5822086 to straighten it out.

I lost my Ipad 5 and requested delete all from find my phone, fortunately they found it and as soon as I activated deleted itshelf as expected, how do I start it again ?

I lost my Ipad 5 and requested delete all from find my phone, they found it and as soon as I activated deleted itshelf as expected, how do I start it again ?

The iPad should be asking you for the Apple ID and Password when you turn it on.

When i add text to PDFs and work on the file for awhile, my red added text starts to turn into red X's with a box around them. I have OCRs turned off, i have the latest update, and i have registered the product. What is happening to my text while i'm work

When i add text to PDFs and work on the file for awhile, my red added text starts to turn into red X's with a box around them. I have OCRs turned off, i have the latest update, and i have registered the product. What is happening to my text while i'm working on these files? On top of this, my red arrows get moved around also.

Hi ,
Could you please update me with few details like what version of Acrobat are you using?
What OS do you work on ?
Do you experience this any particular PDF or happens with all of them?
Did you try the same with turning on the OCR ?Please check the same and compare the outputs .Does that help you in anyway ?
If the file is not confidential ,could you please share the file with us so that we can analyse it our end and revert you with the appropriate answer .
Please share the file on [email protected] and please cc [email protected] as well .
Regards
Sukrit Dhingra

Recently the sound on my Iphone 4 for texts, and email alerts started working intermittently. I have upgraded to the latest software and the Apple store even replaced the phone but safe issues

Recently the sound on my Iphone 4 for texts, and email alerts started working intermittently. I have upgraded to the latest software and the Apple store even replaced the phone but safe issues

For each mail account, along with designating a primary SMTP server, you should be able to just turn off any and all other SMTP servers you have listed. In that case, if there is a problem with comcast, the message send should just fail.
Also make sure your comcast smtp settings are correct (port, likely 587 but might be something else for comcast, whether you should be suing SSL or not, do you need authentication or not).
You might find the comcast forums useful for getting the settings right - I found this:
http://forums.comcast.com/t5/E-Mail-and-Xfinity-Connect-Help/iphone-email/m-p/66 1151?view=by_date_ascending#M131151
The second poster notes, SSL should be on, authentication should be "password" and you should be using port 995

HT1766 I can't get my iPod to "backup" to iCloud. It started and told me the estimated time remaining. When I came back, it said it couldn't be completed because the verification request timed out. Can anyone tell me why this keeps happening?

I've tried several times to get it to Backup to iCloud. But every time I do, it will start and say it is "backing up". Then after a few minutes, it tells me that the backup could not be completed because the verification timed out. Can anyone tell me how to fix this?

I suggest that you Contact Customer Care - click on the Still need help? button to chat with an agent.

User Decision - Loop in Latest Start

Hi Experts,
My requirment is to send reminder emails every day till user responds to workitem. After 6 days, need to forward the workitem to superior. Here for forwarding the workitem, i'm using Latest End for user decision. For sending reminder emails, i'm trying to use Latest Start with the help of loop (for each day). Latest Start is triggering after specified time, but loop is not working. Can you plz tell me, why is it so? and how can we handle this.
Thanks in Advance,
Siva Sankar.

Hi Shiva,
Use Requested End of the task as deadline monitoring and action will be "Modeled". Then one outcome will be appeared. in that outcome first use a step to find out agents to whom you want to send the remainder mail using method and function module "RH_GET_ACTORS". Then create a loop according to your requirement and increase a counter to maintain the loop iteration. Inside the loop you can send the remainder mail. Once the loop will be finished use "Process control" to obsolete the particular step which is lying in current agents inbox. So that step will be obsolete after all remainder so one outcome will be appeared in that main task and in that new outcome you can create the same task to send the same workitem to suprior's sap inbox.
Thanks
Goutam Saha

Itunes will not start and keep getting send error report to MS message

I had a system crash and have re-built the sytem with XP Professional SP2 with all upto date patches. Symantec Norton Internet Security 2007.
Downloaded the latest Itunes and Quicktime update on Monday evening and now every time I click on the Itunes icon, i get unable to start application and do you want to send an error report to Microsoft.
I remember all the problems with the 6 to 7 upgrade and am hoping this is not a repeat.
Any help appreciated.

The quote below is from a previous thread where several people solved your same problem with the stated technique. Maybe it will work for you. Good Luck.
iTunes 7.0.2 FIX.........Have tried all 'fixes' suggested but iTunes STILL not opening
1. Uninstall iTunes and Quicktime.
2. Do a search in the C:\ drive for "QuickTime". Delete EVERYTHING that pops up.
3. Restart the computer.
4. Install QUICKTIME ONLY
5. THEN install iTunes......and IT WORKS.....Just remember to install Quicktime FIRST.

Start and Stop Trigger using PXI-6120 and DigitalStartAndStopTrigger.vi not working :-(

Hello,
I've been trying for a while now to get my PXI unit to capture a waveform between a Start and Stop (Reference) Trigger using the NI example DigitalStartAndStopTrigger.vi downloaded from the NI website. However, whilst the start trigger and stop trigger seem to be working i.e. the VI runs and stops at the correct times there is never any data read from my DAQmx compatible PXI-6120 card. So I can see the VI is running around the aquisition loop but the Property Node AvailSampPerChan is always returning zero... this has me slightly puzzled. I thought this might just be a driver issue so I've updated my box to the following software versions (see below) and installed the latest drivers e.g. DCDNov07.exe (also from the NI site) but nothing has changed.
my software as of now.
Labview 7.1 (with the 7.1.1 upgrade applied)
Max 4.3.0.49152
DAQmx 8.6.0f12
Trad DAQ 7.4.4f7
before I updated I had the same problem but with the following versions:
Labview 7.1 (with the 7.1.1 upgrade applied)
Max 4.2.1.3001
DAQmx 8.5.0f5
Trad DAQ 6.9.3f4
So to cut a long story short I still have the same problem with the triggers... does anybody have any ideas what is going wrong?
To add insult to injury it the traditional DAQ example ai_start-stop_d-trig.vi was almost working correctly before I did the upgrade. It had the strange behaviour of capturing the AI0 channel but on the wrong edges (e.g. if I set Start on Rise and Stop on Fall it would do the opposite, Start on Fall and Stop on Rise).
I'm going to leave my box doing a mass compile over night but i'd really like it if someone could suggest a solution or point me in the right direction.
Many thanks,
Mike

Hi Graham
I'm out of the lab today but I'll try and answer your questions as best I can...
1) What are the values you have set for Buffer size, Rate, samples per read and post trigger Samples?
At the moment I have all the values (e.g. sample rate, buffer size etc) unchanged apart from the ones I mentioned in my previous post (see above). I have in the past played around with changing the buffer sizes and rates in the example VI but as this appeared to have no effect on the behaviour I now have them setup as in the download.
2) Does the program end after the stop trigger is implemented?
Yep, if I toggle the trigger line high then low I see the program exits the read loop and the VI stops running as expected.
3) Lastly can you give me the details of triggering method. Are you
using a digital train of users set digital pulses? how long is the
program running.I'm using the WriteDigChan.vi to manually toggle the first digital line of the PXI-6733 card which is wired directly to PFI0 of the PXI-6120 card. Generally, I just start the VI running and then toggle the line high, wait a couple of seconds and then toggle it low.
To me it all looks like it should be acquiring samples but as I said yesterday it just refuses to fill the buffer with any data (and hence no samples are read).
Any ideas? and thanks for you help,
Mike

Latest Start and Requested Edn

Similar Messages

Maybe you are looking for