Latest thunderbird was unable to join cell for table.

I have just upgrade to ubuntu, and currently face with a few issue.
*The created cell was unable to merge using "join cell" function. Currently was on ubuntu 14.04 64bit
*was unable to select all the content in a single column.

It would appear to me it is just the last row of the table than can not be Joined. Is that your observation as well?

Similar Messages

  • "open project was cancelled or the application was unable to load database for..."

    I'm doing a project for my Professional Writing course and I
    have to use RoboHelp to create an online help document. The
    professor provided templates for us to use but when I go to open
    the project file I get the following error: "open project was
    cancelled or the application was unable to load database
    for....(then the directory)"
    I know the project file isn't corrupted because the members
    of my class are using the same one without issue. I tried
    re-downloading the file, I also re-installed the program itself,
    still with no luck. I'm using a Trial Version of RoboHelp 6.0 .
    The only other suggestions I have seen are that I don't have
    edit perms for the system, but it's my personal laptop and I have
    full admin privs. I thought at first that the folder was read-only,
    but when I opened it up all it displays is the little green box in
    the checkbox (which doesn't mean the folder is read-only, it's just
    some stupid windows default, it's only read-only if the box is
    actually checked). I tried making the entire directory read-only
    and then turn it off but still get the same error.
    Any suggestions?

    There's a topic on my site about Opening Projects that
    includes the method of deleting the CPD and XPJ files but I didn't
    cover that as the project is good for everyone else. Anything is
    worth a try at the moment though.
    Another thing to try is to rename the course folder, then
    create a new folder with the same name plus all sub folders. Then
    move the files across. That will ensure the folder properties are
    good and not read only. Yes I know what you said but again anything
    is worth a try.
    Also, in the last post you are saying the directory is not
    read-only. I assume the files are all good?
    Ref my previous post, is it the case that now you are getting
    an error before the original error would have popped up?

  • Open project was cancelled or application was unable to load database for pathname

    My pc is installed with Robohelp 3x. Recently I shifted the
    pc from one room to anther. Now when I attempt to open my existing
    workable solution, it give me the following message: "Open project
    was canceled or application was unable to load database for
    <pathname>". Do I need to call for Robohelp technical
    support? If yes, can someone provide me the toll free number?
    Can someone pls advise?

    Thanks Peter, managed to get in through the link you've
    given. I seriously doubt it has anything gotta do with a corrupted
    project. I have 2 working projects last week but they can no longer
    be opened this week.
    I tried even to created an empty project from scratch. It was
    created successfully but when I reopen the project, it shows the
    same error message.
    Could there have been other possibilities or ways which I can
    troubleshoot?
    *puzzled*

  • Errors with SharePoint Security Token Service: "The revocation function was unable to check revocation for the certificate"

    I'm getting these errors in the eventlog and ULS, "An operation failed because the following certificate has validation errors:\n\nSubject Name: CN=SharePoint Security Token Service, OU=SharePoint, O=Microsoft, C=US\nIssuer Name: CN=SharePoint Root
    Authority, OU=SharePoint, O=Microsoft, C=US\nThumbprint: <STS CERTIFICATE THUMBPRINT>\n\nErrors:\n\n RevocationStatusUnknown: The revocation function was unable to check revocation for the certificate."
    The errors point to the SharePoint Security Token Service as the issue ("The revocation function was unable to check revocation for the certificate") reported back by the Topology service.  This is apparent when executing a search, accessing
    the managed metadata service, issuing SPSite commands in Powershell, or anything that needs to run through the "SharePoint Web Services" site.  I've looked at the certificate assigned to that site and everything appears to be in order. 
    It would seem to me to be either an incorrect endpoint configuration (internally cached perhaps?) or related to security access for the configuration database (in order to validate the certificate root).
    What I’ve tried so far:
    I’ve been all over the certificate settings, both in the server store, and within SharePoint Token Service config.  Both appear to be configured correctly such that the root CAs can be validated.
    Re-entered the passwords for the application pool domain accounts to eliminate these as a potential cause.  I’ve also verified the service accounts reporting the error, do have access to the configuration database.
    Re-provisioned the STS service to see if that might clear out any cached issues and validated everything else according to this
    MS Tech note.
    So far nothing has worked.  Is there anything else I could be looking at that I've missed? (Full eventlog detail below)
    Log Name:      Application
    Source:        Microsoft-SharePoint Products-SharePoint Foundation
    Date:          2/20/2015 11:19:41 AM
    Event ID:      8311
    Task Category: Topology
    Level:         Error
    Keywords:      
    User:          <SP SERVICE ACCOUNT>
    Computer:      <SHAREPOINTSERVER>
    Description:
    An operation failed because the following certificate has validation errors:\n\nSubject Name: CN=SharePoint Security Token Service, OU=SharePoint, O=Microsoft, C=US\nIssuer Name: CN=SharePoint Root Authority, OU=SharePoint, O=Microsoft, C=US\nThumbprint: <STS
    CERT THUMBPRINT>\n\nErrors:\n\n RevocationStatusUnknown: The revocation function was unable to check revocation for the certificate.
    Event Xml:
    <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
      <System>
        <Provider Name="Microsoft-SharePoint Products-SharePoint Foundation" Guid="{6FB7E0CD-52E7-47DD-997A-241563931FC2}" />
        <EventID>8311</EventID>
        <Version>14</Version>
        <Level>2</Level>
        <Task>13</Task>
        <Opcode>0</Opcode>
        <Keywords>0x4000000000000000</Keywords>
        <TimeCreated SystemTime="2015-02-20T17:19:41.213852500Z" />
        <EventRecordID>1611121</EventRecordID>
        <Correlation />
        <Execution ProcessID="10212" ThreadID="10328" />
        <Channel>Application</Channel>
        <Computer><SHAREPOINTSERVER></Computer>
        <Security UserID="<SP SERVICE ACCOUNT>" />
      </System>
      <EventData>
        <Data Name="string0">CN=SharePoint Security Token Service, OU=SharePoint, O=Microsoft, C=US</Data>
        <Data Name="string1">CN=SharePoint Root Authority, OU=SharePoint, O=Microsoft, C=US</Data>
        <Data Name="string2"><STS CERT THUMBPRINT></Data>
        <Data Name="string3">RevocationStatusUnknown: The revocation function was unable to check revocation for the certificate.
    </Data>
      </EventData>
    </Event>

    Hi Darren,
    This problem seems to occur when an administrator deletes the local trust relationship of the farm from the Security section of the Central Administration website
    In order to resolve this problem, the local trust relationship has to be created. This can be done by running the following PowerShell commands
    $rootCert = (Get-SPCertificateAuthority).RootCertificate
    New-SPTrustedRootAuthority -Name "localNew" -Certificate $rootCert
    After running the above commands, perform an IISReset on all servers in the farm.
    More information:
    http://support.microsoft.com/kb/2545744
    Best Regards,
    Wendy
    Forum Support
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
    [email protected]
    Wendy Li
    TechNet Community Support

  • Unable to join 3 fact tables in obiee data model.

    Hi,
    I am unable to join the 3 fact tables in obiee rpd. If I join with 2 fact tables I got the data in repors, Once I add the one more fact table and join with related dimensions, I am getting nodata error. I am following all joins keys as per datamodel, I am able to see the data in database. anyone pls give me the solution. Thanks in advance.
    Edited by: 1007582 on May 23, 2013 2:17 AM

    Can you please give some more detail as in what you have model in RPD;
    For example, if There are 3 Fact table F1, F2, F3 and two Dimesion Confirmed_D1, Non_Conf_D2. Confirmed_D1 is joined to all three fact tables and Non_Conf_D2 is joined to F2.
    Now to implement this model we have to set the logical content level in BMM layer for Non_Conf_D2 in F1 & F2 to Total*. After this only we can report on Confirmed_D1, Non_Conf_D2, F1, F2, F3 whithout any error.
    Sometime join with multiple table can also result in No Data, since the join conditions filters out the result data.
    Please mark helpful or correct.
    Regards,
    Kashinath

  • Unable to merge cells in Table(WAD)

    HI Gurus,
    I am working on BI7.0,
    I am trying to create Web Templates to display reports in portal for that
    I have selected Table (rows and coloms), When I try to merge first two cells
    (to write descritpion of query) it is not allowing me to merge.
    Can anybody suggest me how to merge two cells in table.
    Thanks in advance.
    Maruthi
    Edited by: maruthi k on Dec 15, 2008 2:04 PM

    If you're talking simply about merging the cells in an HTML table, then you use the COLSPAN or ROWSPAN options in  HTML.
    Check out the following
    <html>
    <body>
        <table border="1" cellpadding="2" cellspacing="0">
            <tr>
                <td>
                    Heading 1</td>
                <td>
                    Heading 2</td>
                <td>
                    Heading 3</td>
            </tr>
            <tr>
                <td colspan="2">
                    Text covering 2 cells</td>
                <td>
                    Last cell</td>
            </tr>
            <tr>
                <td rowspan="2">
                    Text covering 2 cells across 2 rows</td>
                <td>
                    Text in cell 2 row 2</td>
                <td>
                    Text in cell 3 row 2</td>
            </tr>
            <tr>
                <td>
                    Text in cell 2 row 3</td>
                <td>
                    Text in cell 3 row 3</td>
            </tr>
        </table>
    </body>
    </html>
    Take the above code and put it in a simple HTML file and run that file in your browser, you should then be able to see how COLSPAN and ROWSPAN work.
    COLSPAN=2 means that the cell spans 2 columns. Similary, COLSPAN=3 would then span 3 columns.
    Remember though that when you set COLSPAN=2, you will need 1 less TD in that row, otherwise you end up with an extra cell in that row which makes your table look all messy.
    Now, in your template, get into the XHTML view, find the table, and set the COLSPAN / ROWSPAN accordingly.
    Hope this helps.
    Cheers,
    Andrew

  • Unable to get cells for the columns which have no data in cross-tab report

    Hi friends,
    I am developing a cross-tab report.
    Let's take an example to explain the problem.
    Here is the XML file i am using
      <?xml version="1.0" ?>
    - <!--  Generated by Oracle Reports version 6.0.8.11.3
      -->
    - <MODULE1>
    - <LIST_G_SCHEMECODE>
    - <G_SCHEMECODE>
      <SCHEMECODE>171091</SCHEMECODE>
      <AMOUNT>0</AMOUNT>
      <ASSET_TYPE>Govt Guarantee</ASSET_TYPE>
      <MARGIN>0</MARGIN>
      <AMOUNT_SECURED>0</AMOUNT_SECURED>
      <VALUE_OF_SECURITY>0</VALUE_OF_SECURITY>
      </G_SCHEMECODE>
    - <G_SCHEMECODE>
      <SCHEMECODE>171091</SCHEMECODE>
      <AMOUNT>0</AMOUNT>
      <ASSET_TYPE>Loans To Govt</ASSET_TYPE>
      <MARGIN>0</MARGIN>
      <AMOUNT_SECURED>0</AMOUNT_SECURED>
      <VALUE_OF_SECURITY>0</VALUE_OF_SECURITY>
      </G_SCHEMECODE>
    - <G_SCHEMECODE>
      <SCHEMECODE>171093</SCHEMECODE>
      <AMOUNT>0</AMOUNT>
      <ASSET_TYPE>Govt Guarantee</ASSET_TYPE>
      <MARGIN>120</MARGIN>
      <AMOUNT_SECURED>0</AMOUNT_SECURED>
      <VALUE_OF_SECURITY>0</VALUE_OF_SECURITY>
      </G_SCHEMECODE>
    - <G_SCHEMECODE>
      <SCHEMECODE>171093</SCHEMECODE>
      <AMOUNT>0</AMOUNT>
      <ASSET_TYPE>Loans To Govt</ASSET_TYPE>
      <MARGIN>0</MARGIN>
      <AMOUNT_SECURED>0</AMOUNT_SECURED>
      <VALUE_OF_SECURITY>0</VALUE_OF_SECURITY>
      </G_SCHEMECODE>
    - <G_SCHEMECODE>
      <SCHEMECODE>*171095*</SCHEMECODE>
      <AMOUNT>0</AMOUNT>
      <ASSET_TYPE>Govt Guarantee</ASSET_TYPE>
      <MARGIN>100</MARGIN>
      <AMOUNT_SECURED>0</AMOUNT_SECURED>
      <VALUE_OF_SECURITY>0</VALUE_OF_SECURITY>
      </G_SCHEMECODE>
      </LIST_G_SCHEMECODE>
      </MODULE1>Now I want SCHEMECODE in rows and ASSET_TYPE in columns.
    And the each ASSET_TYPE column is to be divided into 2 sub-columns (MARGIN,AMOUNT_SECURED).
    I am able to achevie this.
    The problem is that ,for the schemecode 171095, since there is no data for ASSET_TYPE "Loans To Govt",no cells are generated for this SCHEMECODE and ASSET TYPE.
    But the requirement is to generate blank cells.
    If needed i will send the template at xml files also.

    try this, there must be simpler one i guess...
    1. take a form field, and make its type as number. Paste the below one <?xdoxslt:set_variable($_XDOCTX,'v1',2)?>
    2. now take a table with as below,
    A l B |
    C l D1 l D2 l E1 l E2 l
    observe that i. A, C are in one column
    ii. cell B is on top of D1, D2
    iii. we have no cell on top of E1 and E2 cells
    iv. 'l' represents the wall of the cell :)
    A: <?horizontal-break-table:1?> SCHEMECODE
    B: <?for-each-group@column:G_SCHEMECODE;ASSET_TYPE?> <?ASSET_TYPE?> <?end for-each?>
    C: <?for-each-group:G_SCHEMECODE;SCHEMECODE?> <?xdoxslt:set_variable($_XDOCTX,'v1',2)?> <?SCHEMECODE?>
    D1: <?for-each-group@cell:current-group();ASSET_TYPE?> <?MARGIN?> <?xdoxslt:set_variable($_XDOCTX,'v1',xdoxslt:get_variable($_XDOCTX,'v1')-1)?>
    D2: <?AMOUNT_SECURED?> <?end for-each?> <?end for-each?>
    E1: <?for-each@column:xdoxslt:foreach_number($_XDOCTX,1,xdoxslt:get_variable($_XDOCTX,'v1'),1)?>
    E2: <?END FOR-EACH?>
    3. If you are confused gimme your email id, i will pass the template. But you should add credits to me.. :)

  • After importing spread sheet,unable to select cells for linking components

    I am not sure what causes this. Some times the spreadsheet gets locked after i import it to excelcius. I am not sure what i am missing.
    Also when a new version of the spread sheet with minor changes is imported for carrying out the changes in XLF, the new spreadsheet in the excelcius gets locked and i can select any cells.
    There should be a simple trick to over come this and please help!

    Thanks for the prompt response Amit>
    I have checked the spread sheet and it not protected. It used to happen once in while earlier but now i am stuck with this.
    Also, on the similar lines, can we import a new excel spread sheet of an XLF and modify the XLF to re link some of the cells? It is not allowig me to select the cells in the spread sheet in this situation also and every thing gets locked up and i can not do any thing!

  • Unable to join two fact tables via one common dimension in RPD(Repository)

    I have created two fact tables F1 & F2 and one dimension D.
    F1 is joined to D and F2 is also joined to D in Physical layer as well as in BMM layer.
    I created one report in OBI Answers using these three tables.It Showed me the following error.
    **Error Details**
    **Error Codes: OPR4ONWY:U9IM8TAC:OI2DL65P**
    **State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 15018] Incorrectly defined logical table source (for fact table dfghdfh) does not contain mapping for [Dashboard_Fact.Period_Sgt_Key]. (HY000)**
    **SQL Issued: SELECT dfghdfh.Period_Sgt_Key saw_0, "Period Dim".Period_Sgt_Key saw_1, Dashboard_Fact.Period_Sgt_Key saw_2 FROM service_delivery ORDER BY saw_0, saw_1, saw_2**
    How to cope up with the issue or can anyone tell me the alternate workaround for this?

    That is what i have tried.
    I have made a logical table TEST and dragged two fact tables f1 & f2 in source.
    Now when i drag different columns from different fact tables(that are in TEST logical table) in report, it gives an error and not making any joins that you are mentioning.
    ERROR MESSAGE:--
    State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 15018] Incorrectly defined logical table source (for fact table Test) does not contain mapping for [Test.SurveyName_Id, Test.SurveyHead_Id, Test.Respondent_Id, Test.SDBusiness_Area_Id, Test.Period_Sgt_Key, Test.OBS_Id, Test.VOCBusiness_Area_Id, Test.Question_Sgt_Key]. (HY000)
    The columns mentioned in the error message are all from test logical table..some are from F1 & some from F2.

  • Reg: Join Conditions for Tables to create a View for Generic Extraction

    Hi Experts,
    Am trying to extract the data from Solman, for this purpose am creating a Generic Extractor based on three tables. So, can anyone please help me out by providing the join conditions to create a view based upon the following three tables,
    1. CRM_ORDERM_H
    2. DNOD_NOTIF
    3. DNOD_NOTIF_S
    Anyways i require the following fields in the extractor finally:
    CRM CHANGED AT
    GUID
    SAP COMPONENT
    RELEASE
    REPORTED BY
    These are the some of the major fields that i require in the final extractior. Please help me out ASAP with the table join conditions..
    Will Assign Points for the helpfull answer...
    Thanks,
    Gattu.

    Hi,
    I don't know the table CRM_ORDERM_H however you can link DNOD_NOTIF and DNOD_NOTIF_S
    DNOD_NOTIF_S-CLIENT = DNOD_NOTIF-CLIENT
    DNOD_NOTIF_S-GUIDS = DNOD_NOTIF-GUIDS
    For the third table could you please paste here its definition like the hereunder?
    Transp. table      DNOD_NOTIF       Active                                                                   
    Short Text         Notification Header                                                                       
       Field           KeyInitData element    Data TyLengthDecimaShort Text                                      
       CLIENT        X    X   MANDT           CLNT        3     0Client                                          
       GUIDH         X    X   DNOT_GUIDH      RAW        16     0GUID Notification                               
       .INCLUDE               DNOS_NOTIF_INT  STRU        0     0Notifications (Header, Internal Fields)         
       OBJNR                  DNOT_OBJNR      CHAR       22     0Status Management Object Number                 
       STATUS                 DNOT_STATUS     CHAR        1     0Notification Status                             
       DELETED                DNOT_DELE_N     CHAR        1     0Deletion Indicator Notification                 
       PROCESSOR              DNOT_PROC       CHAR       12     0Current Processor                               
       TYPE_PROC              DNOT_TYPE_PRC   CHAR        2     0Type of Processor                               
       REPORTER               DNOT_REPORTER   CHAR       12     0Reported By                                     
       TYPE_REPO              DNOT_TYPE_REP   CHAR        2     0Type of Notification Creator                    
       CREA_TSTMP             DNOT_CREA_TSTMP DEC        15     0Entry Time Stamp                                
       CHNG_TSTMP             DNOT_CHNG_TSTMP DEC        15     0Time of Last Change                             
       START_TSTMP            DNOT_START_TSTMPDEC        15     0Initial Response Time - Time Stamp              
       END_TSTMP              DNOT_END_TSTMP  DEC        15     0Requested End of Processing - Time Stamp        
       CLO_TSTMP              DNOT_CLO_TSTMP  DEC        15     0Completion Time Stamp                           
       .INCLUDE               DNOS_NOTIF_EXT  STRU        0     0Notifications (Header, External Fields)         
       NUMB                   DNOT_NUM        CHAR       12     0Notification Number (External)                  
       REFNUM                 DNOT_REFNUM     CHAR       20     0External Reference Number                       
       TYPE_NOTIF             DNOT_TYPE_N     CHAR        6     0Message category                                
       CATEGORY               DNOT_CATEGORY   CHAR       12     0Topic, Area                                     
       SUBJECT                DNOT_SUBJECT    CHAR       60     0Re:                                             
       PRIORITY               DNOT_PRIORITY   CHAR        1     0Notification priority                           
       LANGUAGE               DNOT_LANG_N     LANG        1     0Notification Language                           
    hope this helps...
    Olivier.

  • Unable to add Action for table - throwing Fatal error while rendering the table after adding

    Hi,
    I am not able to add action to the table i created.
    when i click on events and then Create Action for "onFilter" event, it is giving me Internal Error. The message details is:
    eclipse.buildId=@qualifier@
    java.version=1.6.0_45
    java.vendor=Sun Microsystems Inc.
    BootLoader constants: OS=win32, ARCH=x86, WS=win32, NL=en
    Command-line arguments:  -os win32 -ws win32 -arch x86 -data C:\NWDS\Workspace
    Error
    Thu Jul 17 11:17:27 IST 2014
    Internal Error
       Plug-In Name: Web Dynpro HTML Rendering
       Internal Error  : com.sap.ide.webdynpro.rendering.html
       Class      : com.sap.ide.webdynpro.viewdesigner.ur.RenderingService
       Method     : renderDelta
       Message    : java.lang.RuntimeException: nullFatal rendering error at control com.sap.tc.webdynpro.clientserver.uielib.standard.uradapter.TableAdapter [] and renderer com.sap.tc.ls.renderer.ie6.LSSapTableRenderer. Please contact the developer of the renderer. com.sap.tc.webdynpro.clientserver.uielib.standard.uradapter.TableAdapter@1376233Fatal rendering error at control com.sap.tc.webdynpro.clientserver.uielib.standard.uradapter.FlowLayoutAdapter [] and renderer com.sap.tc.ls.renderer.ie6.LSFlowLayoutRenderer. Please contact the developer of the renderer. com.sap.tc.webdynpro.clientserver.uielib.standard.uradapter.FlowLayoutAdapter@1102ae6Fatal rendering error at control com.sap.tc.webdynpro.clientserver.uielib.standard.uradapter.GroupAdapter [] and renderer com.sap.tc.ls.renderer.ie6.LSGroupRenderer. Please contact the developer of the renderer. com.sap.tc.webdynpro.clientserver.uielib.standard.uradapter.GroupAdapter@70815bFatal rendering error at control com.sap.tc.webdynpro.clientserver.uielib.standard.uradapter.FlowLayoutAdapter [] and renderer com.sap.tc.ls.renderer.ie6.LSFlowLayoutRenderer. Please contact the developer of the renderer. com.sap.tc.webdynpro.clientserver.uielib.standard.uradapter.FlowLayoutAdapter@3cb708Fatal rendering error at control com.sap.tc.webdynpro.clientserver.uielib.standard.uradapter.ScrollContainerAdapter [] and renderer com.sap.tc.ls.renderer.ie6.LSScrollContainerRenderer. Please contact the developer of the renderer. com.sap.tc.webdynpro.clientserver.uielib.standard.uradapter.ScrollContainerAdapter@14a4b5Fatal rendering error at control com.sap.tc.webdynpro.clientserver.uielib.standard.uradapter.FlowLayoutAdapter [] and renderer com.sap.tc.ls.renderer.ie6.LSFlowLayoutRenderer. Please contact the developer of the renderer. com.sap.tc.webdynpro.clientserver.uielib.standard.uradapter.FlowLayoutAdapter@14983d6Fatal rendering error at control com.sap.tc.webdynpro.clientserver.uielib.standard.uradapter.ScrollContainerAdapter [] and renderer com.sap.tc.ls.renderer.ie6.LSScrollContainerRenderer. Please contact the developer of the renderer. com.sap.tc.webdynpro.clientserver.uielib.standard.uradapter.ScrollContainerAdapter@16e8151
       Exception  : java.lang.RuntimeException: java.lang.RuntimeException: nullFatal rendering error at control com.sap.tc.webdynpro.clientserver.uielib.standard.uradapter.TableAdapter [] and renderer com.sap.tc.ls.renderer.ie6.LSSapTableRenderer. Please contact the developer of the renderer. com.sap.tc.webdynpro.clientserver.uielib.standard.uradapter.TableAdapter@1376233Fatal rendering error at control com.sap.tc.webdynpro.clientserver.uielib.standard.uradapter.FlowLayoutAdapter [] and renderer com.sap.tc.ls.renderer.ie6.LSFlowLayoutRenderer. Please contact the developer of the renderer. com.sap.tc.webdynpro.clientserver.uielib.standard.uradapter.FlowLayoutAdapter@1102ae6Fatal rendering error at control com.sap.tc.webdynpro.clientserver.uielib.standard.uradapter.GroupAdapter [] and renderer com.sap.tc.ls.renderer.ie6.LSGroupRenderer. Please contact the developer of the renderer. com.sap.tc.webdynpro.clientserver.uielib.standard.uradapter.GroupAdapter@70815bFatal rendering error at control com.sap.tc.webdynpro.clientserver.uielib.standard.uradapter.FlowLayoutAdapter [] and renderer com.sap.tc.ls.renderer.ie6.LSFlowLayoutRenderer. Please contact the developer of the renderer. com.sap.tc.webdynpro.clientserver.uielib.standard.uradapter.FlowLayoutAdapter@3cb708Fatal rendering error at control com.sap.tc.webdynpro.clientserver.uielib.standard.uradapter.ScrollContainerAdapter [] and renderer com.sap.tc.ls.renderer.ie6.LSScrollContainerRenderer. Please contact the developer of the renderer. com.sap.tc.webdynpro.clientserver.uielib.standard.uradapter.ScrollContainerAdapter@14a4b5Fatal rendering error at control com.sap.tc.webdynpro.clientserver.uielib.standard.uradapter.FlowLayoutAdapter [] and renderer com.sap.tc.ls.renderer.ie6.LSFlowLayoutRenderer. Please contact the developer of the renderer. com.sap.tc.webdynpro.clientserver.uielib.standard.uradapter.FlowLayoutAdapter@14983d6Fatal rendering error at control com.sap.tc.webdynpro.clientserver.uielib.standard.uradapter.ScrollContainerAdapter [] and renderer com.sap.tc.ls.renderer.ie6.LSScrollContainerRenderer. Please contact the developer of the renderer. com.sap.tc.webdynpro.clientserver.uielib.standard.uradapter.ScrollContainerAdapter@16e8151
          [Error: com.sap.ide.tools.services.ui.dialog.DialogService  Thread[main,6,main]]
    The complete error details is also attached with the message.
    After creating the action, the table looks like below:
    Can someone help me on fixing this issue.
    Thanks,
    Abhishek.

    Its a rendering issue with the NWDS/IDE.
    Try, close and re-open for fix it. If it still persists, uninstall NWDS and re-install the right version of NWDS w.r.t the Portal server.
    Regards,
    Sharath

  • IPhone 5 unable to join airport extreme network, help!!!

    I just bought an airpot extreme a week ago. After I configured it, my macbook pro can connect the wi-fi flawlessly. However, my iphone 5 was unable to join the airport extreme network. It sees the network, just can't join it. It doesn't say unable to join, I choose my network on my iphone, it shows it is trying to join, and never successfully joined. I've been trying miliion's way to fix this problem. I reset my iphone completely, reset my airport extreme, and reset the model, still never worked. Any idea?

    Was one of the million ways that you tried.....changing the name of the wireless network on the AirPort Extreme and also changing the wireless network password?
    If not.....
    Keep the wireless network name simple
    Use only letters and numbers.....no special characters (like an apostrophe or asterisk, etc)
    Limit of 20 characters or less in the name....8-10 would be ideal.
    No blank spaces
    Same rules for the wireless network password
    If that does not work, I can only conclude that the operating system on the iPhone has become corrupted....and this is an iPhone problem....not an AirPort Extreme problem.
    Best to post in the iPhone support area to let the experts over there have a crack at things....but in general you will need to reset the iPhone back to its original default settings, then restore it again from your backup. If that does not work, the iPhone needs to be replaced.
    Using iPhone

  • Macbook air unable to join wifi network

    I have a brand new MacBook Air and am new to Macs, but have a very good understanding of PCs. I constantly have to reenter our wireless security code for Wi-fi.  Now I am receiving a message that says "the computer was unable to join the wi-fi network you selected".  What am I doing wrong?

    After a 30 minute phone call with Support, nothing worked still! In the end he suggested changing the channel of the wireless router/modem.  I tried to do this (after research online on my imac) and then lost all internet connection. The router/moden no longer worked at all!  Then had to call the support line for the router; spent another hour or so trying things, but to no avail. In the end have had to buy a new modern modem router (Belkin Dual band N+ PLAY N600 DB) and so far ......................it's working!  But we only bought it this morning. Will report back another day with an update!

  • Application was unable to load database

    I have a RoboHelp 9 project that I left open on my computer overnight and microsoft updates ran causing my computer to restart.  When I try to open my RoboHelp 9 project, i get the following error:
    Open project was cancelled or the application was unable to load database for "C:\CODE\HELP\HELP.CPD"
    How can I correct the CPD file without starting over?

    Hi there
    Just delete the CPD and re-open the project. When RoboHelp sees it missing, it will bake up a fresh one to use and all should then be well.
    Cheers... Rick

  • Project Server 2013 - This webpart was unable to load

    Hi all,
    I am getting the following error in project server 2013 project sites:
    This webpart was unable to load. For more information, please contact your server administrator.
    <Guid>
    I only get this error message on 'Project Summary Web Part'.
    Any idea what it could be?
    Thank you,
    SJ

    Hi there!
    I got similar problem in a PDP that was working perfectly even after migration to 2013. On this case, my PDP was showing the webpart that let you to choose what fields and custom fields want to show on a specific PDP.
    I created a copy of the crashed PDP and got the same error. So I bet for remove all the custom fields and add one by one to see what happens. The surprise came up when it started to work when my PDP had just pair of custom fields. With this procedure,
    I found that the problem was on some specific custom fields created that had null values to all the projects created before. Once I forced value on those fields it worked properly!!
    Sometimes EPM2013 has a very strange behavioural and in some cases just clicking on EDIT and SAVE  without any change have solved some of my problems too.
    I hope it helps this to you and feel free to contact me if I can somehow help you :)
    Diego

Maybe you are looking for