Latest update already installed but can't open file

I have recently downloaded the latest update for Pages (version 5.2), and my Appstore updates pages confirm this by showing "installed" but when I go to open a Pages documents, I get a message saying I need a newer version of Pages to open the file. Then when I open up my Pages, despite the appearance being that of the latest version (ie. starting with the iCloud window), when I check on my "about Pages", sure enough, it says my version is only 4.2. I'm completely at a loss as to what I should do? It was working fine for days after I had downloaded the latest version. But because my kid had stuffed up my desktop and deleted one of my folders, I went to the time machine to restore. Is that what caused the problem?

Pages 5.x is in the Appliations folder
Pages 4.2 is in the Applications/iwork 09 folder
You have to make sure you are opening the documents in the right version. I know it is confusing as the icon on the documents all shows Pages 5 icon.

Similar Messages

HT4623 im having problems with iphone 5 it keeps goin to recovery mode, i have the latest update already installed but it keeps goin to recovery every two day. can anyone help me on hoe to fix this issue? thanks

im having problems with iphone 5 it keeps goin to recovery mode, i have the latest update already installed but it keeps goin to recovery every two day. can anyone help me on hoe to fix this issue? thanks

Try to Restore with iTunes on your computer. If this does not work, there is full Warranty. Make Genius reservation or set up service and take or send to Apple for resolution.

Indesing updated to latest version (10.0) but can't open file created yesterday.

Created a file yesterday with Indesign. Wanted to continue work today but Indesign requests to update to 10.0. I updated allready I even created this file with this version with this edition of Indesign but can't open it anyway.
- Alert shown is: Cannot open "[documentname]" because it was saved with a newer version of Adobe InDesign CC (10.0). You must use that version or later to open the file. To then enable it to be opened in this version, choose Save As InDesign CS4 or later, or export to IDML. -
So to be clear; I created this document in this version of Indesign and it just doesn't open anymore although all possible updates are performed.
Am really in need of some help since it is about two documents and I just lost work like this...
Kind regards,
Linda

Aaaaaaahhhhh....FOUND IT!! The trick is to NOT use the alias-thumb in the dock, but to actually start up in the apps-folder where the Adobe Indesign 2014 edition is installed next to the 'old' edition.
Wow. Not sure to feel stupid or to be angry... pffff...
Back to work I say! (The best remedy...)

Help adobe reader listed as installed but can not open file

I need to open a file from email. It says adobe reader not installed but it shows it is installed when I look in control panel. Thanks for any help you can shre..

1.Which OS you are using?
2.What version of Reader is shown in in control panel?
Just try re installing Reader from Adobe website and report any issue you face during installation.

I´m trying to open a presentation created oct 2013 and asks me to update my KN version, but the latest is already instaled, and is not opening, what can I do?

I´m trying to open a presentation created oct 2013 and asks me to update my KN version, but the latest is already instaled, and is not opening, what can I do?

Put Keynote application in the trash, then install again from the Mac App Store fixes this.

I have a macbook pro and installed the latest version of numbers but can't open or create a new document

i have a macbook pro and have installed the latest version of numbers but can't open or create a new document

Melting,
Can you share any information regarding what you have tried? To create a new document select the menu item "File > New..."
What documents have you tried to open and what happened when you tried?

Just installed the latest update and now I can't open e mail attachments on my iPad and I phone 5s

just installed the latest update and now I can't open e mail attatchments on my I phone 5s and iPad 2

Try re-installing the big 10.6.8 Combo...
http://support.apple.com/kb/DL1399
Repair Permissions afterwords, reboot.

I just upgraded to Numbers 3.0 but can´t open files of Numbers 9 version, help...!!!!!!

I just upgraded to Numbers 3.0 but can´t open files of Numbers 9, help...!!!!!!
Can someone please help me, because those files in Numbers 9 version, are for my work and now I can´t open them

Hi rabg,
I am using OS X 10.8 on a Mac. This may be different if you are using iOS.
Does Numbers'09 still exist in your Applications folder? Maybe inside a new folder? Perhaps you could use Numbers'09 to open your documents.
Regards,
Ian.

My EBAY app has disappeared, but when I go to App Store, it is already installed but won't open

My EBAY app has dissappeared from my screen. It is already installed, but it won't open (in App Store). How do I get it back?

Sounds like the above solution worked for you I'm posting this for other readers:
One reason this can occur is because of parental settings. eBay has a rating of 12+; if this is not allowed in
Settings > General > Restrictions > Apps
...then the app will not show up.

After latest update to yosemite I can not open finder or any other windows from my desktop

I can not open any windows after last update to yosemite. Finder can not be reopened. Software version is OS X 10.9.5, Macbook pro mid 2009.

Good day Jeff.
I am running most current Adobe Reader X.
Tks Mark

Already Installed but won't Open

I installed iTunes about a month ago and it has worked successfully until today. If i click on the shortcut it says "the action is only valid for products that are already installed." If i go to Add/Remove Programs and Repair or try to reinstall it, it says "the feature you are trying to use is on a network resource that is unavailable. Click Ok to try again, or enter an alternate path to a folder containing the package "iTunes.msi" in the box below. Please help asap

Sounds like the above solution worked for you I'm posting this for other readers:
One reason this can occur is because of parental settings. eBay has a rating of 12+; if this is not allowed in
Settings > General > Restrictions > Apps
...then the app will not show up.

[SOLVED] Samba: Can browse shared folders, but can't open files

Hi all, I've been using Samba to share some folders from my Arch box over the local network, and have not had any issues until just now. As the title says, I am able to browse (via Samba, both on a different device and from the Arch box itself) the folders being shared as well as see their contents, but trying to open a file fails, as does attempting to create a file in one of the shared folders. Accessing the files from the computer itself directly (not via Samba) works fine.
The error given by Thunar when trying to create a file is simply:
Failed to create empty file "test file".
Invalid argument.
Trying to read a file results in the same "invalid argument" error being given by the app that should open the file.
I've removed Samba and reinstalled, following the steps on the wiki to get it set up. Still have the issue.
Further, I only seem to be able to add shares via the smb.conf file - previously I was able to share folders via Thunar or the net usershare command, but now those also give an error:
$ net usershare add tmp /tmp "tmp" everyone:F guest_ok=y
net usershare add: cannot convert name "everyone" to a SID. Undetermined error.
Any ideas on what could be causing the problems would be greatly appreciated!
edit: my smb.conf file:
# This is the main Samba configuration file. You should read the
# smb.conf(5) manual page in order to understand the options listed
# here. Samba has a huge number of configurable options (perhaps too
# many!) most of which are not shown in this example
# Any line which starts with a ; (semi-colon) or a # (hash)
# is a comment and is ignored. In this example we will use a #
# for commentry and a ; for parts of the config file that you
# may wish to enable
# NOTE: Whenever you modify this file you should run the command "testparm"
# to check that you have not made any basic syntactic errors.
#======================= Global Settings =====================================
[global]
usershare path = /var/lib/samba/usershare
usershare max shares = 100
usershare allow guests = yes
usershare owner only = False
# workgroup = NT-Domain-Name or Workgroup-Name
workgroup = WORKGROUP
# server string is the equivalent of the NT Description field
server string = archpc
# This option is important for security. It allows you to restrict
# connections to machines which are on your local network. The
# following example restricts access to two C class networks and
# the "loopback" interface. For more examples of the syntax see
# the smb.conf man page
; hosts allow = 192.168.1. 192.168.2. 127.
# if you want to automatically load your printer list rather
# than setting them up individually then you'll need this
printcap name = /etc/printcap
load printers = yes
# It should not be necessary to spell out the print system type unless
# yours is non-standard. Currently supported print systems include:
# bsd, sysv, plp, lprng, aix, hpux, qnx
; printing = bsd
# Uncomment this if you want a guest account, you must add this to /etc/passwd
# otherwise the user "nobody" is used
; guest account = pcguest
# this tells Samba to use a separate log file for each machine
# that connects
log file = /var/log/samba/%m.log
# Put a capping on the size of the log files (in Kb).
max log size = 50
# Security mode. Most people will want user level security. See
# security_level.txt for details.
security = user
# Use password server option only with security = server
; password server = <NT-Server-Name>
# Password Level allows matching of _n_ characters of the password for
# all combinations of upper and lower case.
; username level = 8
# You may wish to use password encryption. Please read
# ENCRYPTION.txt, Win95.txt and WinNT.txt in the Samba documentation.
# Do not enable this option unless you have read those documents
; encrypt passwords = yes
; smb passwd file = /etc/samba/smbpasswd
# The following are needed to allow password changing from Windows to
# update the Linux sytsem password also.
# NOTE: Use these with 'encrypt passwords' and 'smb passwd file' above.
# NOTE2: You do NOT need these to allow workstations to change only
# the encrypted SMB passwords. They allow the Unix password
# to be kept in sync with the SMB password.
; unix password sync = Yes
; passwd program = /usr/bin/passwd %u
; passwd chat = *New*UNIX*password* %n\n *ReType*new*UNIX*password* %n\n *passwd:*all*authentication*tokens*updated*successfully*
# Unix users can map to different SMB User names
; username map = /etc/samba/smbusers
# Using the following line enables you to customise your configuration
# on a per machine basis. The %m gets replaced with the netbios name
# of the machine that is connecting
; include = /etc/samba/smb.conf.%m
# Configure Samba to use multiple interfaces
# If you have multiple network interfaces then you must list them
# here. See the man page for details.
; interfaces = 192.168.12.2/24 192.168.13.2/24
# Configure remote browse list synchronisation here
# request announcement to, or browse list sync from:
# a specific host or from / to a whole subnet (see below)
; remote browse sync = 192.168.3.25 192.168.5.255
# Cause this host to announce itself to local subnets here
; remote announce = 192.168.1.255 192.168.2.44
# Browser Control Options:
# set local master to no if you don't want Samba to become a master
# browser on your network. Otherwise the normal election rules apply
; local master = no
# OS Level determines the precedence of this server in master browser
# elections. The default value should be reasonable
; os level = 33
# Domain Master specifies Samba to be the Domain Master Browser. This
# allows Samba to collate browse lists between subnets. Don't use this
# if you already have a Windows NT domain controller doing this job
; domain master = yes
# Preferred Master causes Samba to force a local browser election on startup
# and gives it a slightly higher chance of winning the election
; preferred master = yes
# Use only if you have an NT server on your network that has been
# configured at install time to be a primary domain controller.
; domain controller = <NT-Domain-Controller-SMBName>
# Enable this if you want Samba to be a domain logon server for
# Windows95 workstations.
; domain logons = yes
# if you enable domain logons then you may want a per-machine or
# per user logon script
# run a specific logon batch file per workstation (machine)
; logon script = %m.bat
# run a specific logon batch file per username
; logon script = %U.bat
# Where to store roving profiles (only for Win95 and WinNT)
# %L substitutes for this servers netbios name, %U is username
# You must uncomment the [Profiles] share below
; logon path = \\%L\Profiles\%U
# All NetBIOS names must be resolved to IP Addresses
# 'Name Resolve Order' allows the named resolution mechanism to be specified
# the default order is "host lmhosts wins bcast". "host" means use the unix
# system gethostbyname() function call that will use either /etc/hosts OR
# DNS or NIS depending on the settings of /etc/host.config, /etc/nsswitch.conf
# and the /etc/resolv.conf file. "host" therefore is system configuration
# dependant. This parameter is most often of use to prevent DNS lookups
# in order to resolve NetBIOS names to IP Addresses. Use with care!
# The example below excludes use of name resolution for machines that are NOT
# on the local network segment
# - OR - are not deliberately to be known via lmhosts or via WINS.
; name resolve order = wins lmhosts bcast
# Windows Internet Name Serving Support Section:
# WINS Support - Tells the NMBD component of Samba to enable it's WINS Server
; wins support = yes
# WINS Server - Tells the NMBD components of Samba to be a WINS Client
# Note: Samba can be either a WINS Server, or a WINS Client, but NOT both
; wins server = w.x.y.z
# WINS Proxy - Tells Samba to answer name resolution queries on
# behalf of a non WINS capable client, for this to work there must be
# at least one WINS Server on the network. The default is NO.
; wins proxy = yes
# DNS Proxy - tells Samba whether or not to try to resolve NetBIOS names
# via DNS nslookups. The built-in default for versions 1.9.17 is yes,
# this has been changed in version 1.9.18 to no.
dns proxy = no
# Case Preservation can be handy - system default is _no_
# NOTE: These can be set on a per share basis
; preserve case = no
; short preserve case = no
# Default case is normally upper case for all DOS files
; default case = lower
# Be very careful with case sensitivity - it can break things!
; case sensitive = no
#============================ Share Definitions ==============================
[homes]
; comment = Home Directories
; browseable = no
; writable = yes
# Un-comment the following and create the netlogon directory for Domain Logons
; [netlogon]
; comment = Network Logon Service
; path = /home/netlogon
; guest ok = yes
; writable = no
; share modes = no
# Un-comment the following to provide a specific roving profile share
# the default is to use the user's home directory
;[Profiles]
; path = /home/profiles
; browseable = no
; guest ok = yes
# NOTE: If you have a BSD-style print system there is no need to
# specifically define each individual printer
[printers]
comment = All Printers
path = /var/spool/samba
browseable = no
# Set public = yes to allow user 'guest account' to print
guest ok = no
writable = no
printable = yes
# This one is useful for people to share files
[tmp]
comment = Temporary file space
path = /tmp
read only = no
public = yes
writable = yes
# A publicly accessible directory, but read only, except for people in
# the "staff" group
;[public]
; comment = Public Stuff
; path = /home/samba
; public = yes
; read only = yes
; write list = @staff
# Other examples.
# A private printer, usable only by fred. Spool data will be placed in fred's
# home directory. Note that fred must have write access to the spool directory,
# wherever it is.
;[fredsprn]
; comment = Fred's Printer
; valid users = fred
; path = /homes/fred
; printer = freds_printer
; public = no
; writable = no
; printable = yes
# A private directory, usable only by fred. Note that fred requires write
# access to the directory.
;[fredsdir]
; comment = Fred's Service
; path = /usr/somewhere/private
; valid users = fred
; public = no
; writable = yes
; printable = no
# a service which has a different directory for each machine that connects
# this allows you to tailor configurations to incoming machines. You could
# also use the %u option to tailor it by user name.
# The %m gets replaced with the machine name that is connecting.
;[pchome]
; comment = PC Directories
; path = /usr/pc/%m
; public = no
; writable = yes
# A publicly accessible directory, read/write to all users. Note that all files
# created in the directory by users will be owned by the default user, so
# any user with access can delete any other user's files. Obviously this
# directory must be writable by the default user. Another user could of course
# be specified, in which case all files would be owned by that user instead.
;[public]
; path = /usr/somewhere/else/public
; public = yes
; only guest = yes
; writable = yes
; printable = no
# The following two entries demonstrate how to share a directory so that two
# users can place files there that will be owned by the specific users. In this
# setup, the directory should be writable by both users and should have the
# sticky bit set on it to prevent abuse. Obviously this could be extended to
# as many users as required.
;[myshare]
; comment = Mary's and Fred's stuff
; path = /usr/somewhere/shared
; valid users = mary fred
; public = no
; writable = yes
; printable = no
; create mask = 0765
Last edited by m00se (2014-05-26 11:35:28)

It seems your Samba is denying access to these files & dirs. My best guess would be that either the Samba user is not allowed to write (and read) those (in which case you'd have to modify the permissions accordingly) or Samba sets, when the share is mounted, the permissions such that your user is not allowed to read and write (you may in this case try to just set permissions for you to allow you what you want to do; or use "create mask" or "directory mask" or "writable" in your samba config. ).
Also, what do the logs say about this? According to your samba conf they are in /var/log/samba/%m.log where %m is the hostname or IP.

Trying to use document 2 but can't open file on computer!

I put a .rta document from my iPad into Dropbox. Now I can't open it on my Mac, but the message says the file can't be read. Does anyone know how to do this?

I don't believe you put the correct file in dropbox.

I have Adobe reader installed, but can't open pdfs in Firefox and it doesn't show in the Applications tab.

When I click on a pdf link, the new tab opens but doesn't show the content of the pdf. There is no error message. When I look under Tools, Options, applications, there is no option for handling pdfs. I have the Adobe reader for Firefox installed.

https://support.mozilla.com/en-US/kb/Using+the+Adobe+Reader+plugin+with+Firefox
https://support.mozilla.com/en-US/kb/Opening+PDF+files+within+Firefox

After installing Mavericks I can no longer print to my hp Laserjet 3015 (latest driver is installed) but can print to my Canon Ink Jet.

Can anyone help me or do I have to go back to Mountain Lion? I also can no longer connect to my external hard drive.

Installing the new os may have tricked one of the three devices involved. If it used to work, it will again.
Reboot the printer. Reboot the router. On the pad, general, reset, reset network connections.
Make sure all the devices are on the same wifi network. Talk nice to it.

Latest update already installed but can't open file

Similar Messages

Maybe you are looking for