Latest update broke something

This morning I installed the latest updates, and upon reboot it was stuck on the blue screen for several minutes (>10). I then cold-booted, and it booted fine, however I'm missing all the icons next to Spotlight on the menubar. It also won't do a software-shutdown.
I tried Software Update again, it lists the following updates:
Safari 3.1
Security Update 2008-002
Time Machine and Airport.
I click Install and restart, and nothing happens.

FWIW, here's the system log (lots of errors) :
mac kernel[0]: System Sleep
Mar 20 11:04:31 mac [0x0-0x11011].SSHKeychain[167]: Identity added: /Users/norman/.ssh/itc.rsa_key (/Users/norman/.ssh/itc.rsa_key)
Mar 20 11:04:35 mac kernel[0]: System Wake
Mar 20 11:04:35 mac kernel[0]: AirPort: Link Up on en1
Mar 20 11:04:35 mac [0x0-0x11011].SSHKeychain[167]: All identities removed.
Mar 20 11:04:31 mac SSHKeychain[167]: Buggy password in keycahin workaround
Mar 20 11:04:35 mac kernel[0]: AppleYukon2 - en0 link active, 100-Mbit, full duplex, symmetric flow control enabled port 0
Mar 20 11:04:34 mac airportd[19062]: Error: Apple80211Associate() failed -25
Mar 20 11:04:35 mac airportd[19062]: Could not find any preferred networks; trying broadcast requests..
Mar 20 11:04:39 mac kernel[0]: AirPort: Link Up on en1
Mar 20 11:04:39 mac mDNSResponder[16]: Note: Frequent transitions for interface en1 (FE80:0000:0000:0000:0217:F2FF:FE4D:7B01); network traffic reduction measures in effect
Mar 20 11:04:41 mac airportd[19062]: Error: Apple80211Associate() failed -25
Mar 20 11:04:42 mac mDNSResponder[16]: Note: Frequent transitions for interface en1 (FE80:0000:0000:0000:0217:F2FF:FE4D:7B01); network traffic reduction measures in effect
Mar 20 11:04:46 mac mDNSResponder[16]: Note: Frequent transitions for interface en1 (FE80:0000:0000:0000:0217:F2FF:FE4D:7B01); network traffic reduction measures in effect
Mar 20 11:06:16 mac login[11758]: DEAD_PROCESS: 11758 ttys000
Mar 20 11:14:04 mac authexec[19116]: executing /System/Library/CoreServices/Software Update.app/Contents/Resources/suapphelper
Mar 20 11:24:05 mac /System/Library/CoreServices/backupd[19136]: Starting standard backup
Mar 20 11:24:05 mac /System/Library/CoreServices/backupd[19136]: Backing up to: /Volumes/Time Machine/Backups.backupdb
Mar 20 11:24:06 mac /System/Library/CoreServices/backupd[19136]: No pre-backup thinning needed: 376.0 MB requested (including padding), 50.18 GB available
Mar 20 11:24:10 mac /System/Library/CoreServices/backupd[19136]: Copied 684 files (9.7 MB) from volume Macintosh HD.
Mar 20 11:24:10 mac /System/Library/CoreServices/backupd[19136]: Starting post-backup thinning
Mar 20 11:24:11 mac /System/Library/CoreServices/backupd[19136]: Deleted backup /Volumes/Time Machine/Backups.backupdb/mac/2008-03-19-111713: 50.18 GB now available
Mar 20 11:24:12 mac /System/Library/CoreServices/backupd[19136]: Deleted backup /Volumes/Time Machine/Backups.backupdb/mac/2008-03-19-101713: 50.19 GB now available
Mar 20 11:24:13 mac /System/Library/CoreServices/backupd[19136]: Deleted backup /Volumes/Time Machine/Backups.backupdb/mac/2008-03-19-091714: 50.19 GB now available
Mar 20 11:24:14 mac /System/Library/CoreServices/backupd[19136]: Deleted backup /Volumes/Time Machine/Backups.backupdb/mac/2008-03-19-081712: 50.20 GB now available
Mar 20 11:24:14 mac /System/Library/CoreServices/backupd[19136]: Post-back up thinning complete: 4 expired backups removed
Mar 20 11:24:14 mac /System/Library/CoreServices/backupd[19136]: Backup completed successfully.
Mar 20 11:37:29 mac SSHKeychain[167]: handleAgentConnections: select() encountered a fatal error
Mar 20 11:37:32 mac kernel[0]: smbfssmblookup: smbfssmbqpathinfo error = 60
Mar 20 11:37:32: --- last message repeated 5 times ---
Mar 20 11:37:32 mac loginwindow[33]: DEAD_PROCESS: 0 console
Mar 20 11:37:33 mac kernel[0]: smbfssmblookup: smbfssmbqpathinfo error = 60
Mar 20 11:37:33: --- last message repeated 3 times ---
Mar 20 11:37:33 mac com.apple.launchd[111] ([0x0-0x368368].com.Briksoftware.Camouflage[6257]): Exited: Terminated
Mar 20 11:37:33 mac com.apple.launchd[111] ([0x0-0x27027].com.apple.AppleSpell[258]): Exited: Terminated
Mar 20 11:37:33 mac com.apple.launchd[111] (com.apple.pboard[136]): Exited: Terminated
Mar 20 11:37:33 mac com.apple.launchd[111] (com.apple.UserEventAgent-Aqua[133]): Exited: Terminated
Mar 20 11:37:33 mac com.apple.launchd[111] (org.openbsd.ssh-agent[11792]): Exited with exit code: 2
Mar 20 11:37:33 mac AirPort Base Station Agent[6351]: CGSShutdownServerConnections: Detaching application from window server
Mar 20 11:37:33 mac com.apple.AirPortBaseStationAgent[6351]: Thu Mar 20 11:37:33 mac.local AirPort Base Station Agent[6351] <Warning>: CGSShutdownServerConnections: Detaching application from window server
Mar 20 11:37:33 mac com.apple.AirPortBaseStationAgent[6351]: Thu Mar 20 11:37:33 mac.local AirPort Base Station Agent[6351] <Warning>: CGSDisplayServerShutdown: Detaching display subsystem from window server
Mar 20 11:37:33 mac AirPort Base Station Agent[6351]: CGSDisplayServerShutdown: Detaching display subsystem from window server
Mar 20 11:37:33 mac /System/Library/CoreServices/loginwindow.app/Contents/MacOS/loginwindow[19160]: Login Window Application Started
Mar 20 11:37:33 mac AirPort Base Station Agent[6351]: HIToolbox: received notification of WindowServer event port death.
Mar 20 11:37:33 mac AirPort Base Station Agent[6351]: port matched the WindowServer port created in BindCGSToRunLoop
Mar 20 11:37:35 mac com.apple.launchctl.LoginWindow[19163]: launchctl: Dubious ownership on file (skipping): /Library/LaunchAgents/com.norman.postip.plist
Mar 20 11:37:38 mac loginwindow[19160]: USER_PROCESS: 19160 console
Mar 20 11:37:39 mac Software Update[19168]: arguments={\n RootInstallMode = YES;\n SkipConfirm = YES;\n}
Mar 20 11:37:40 mac Software Update[19168]: cookie=""
Mar 20 11:37:40 mac Software Update[19168]: Looking for products to install
Mar 20 11:37:41 mac kernel[0]: smbfssmblookup: smbfssmbqpathinfo error = 60
Mar 20 11:37:41: --- last message repeated 3 times ---
Mar 20 11:37:41 mac Software Update[19168]: No eligible products found for installation
Mar 20 11:37:41 mac Software Update[19168]: Running /sbin/reboot
Mar 20 11:37:41 mac reboot[19174]: rebooted by norman
Mar 20 11:37:41 mac reboot[19174]: SHUTDOWN_TIME: 1206034661 263264
Mar 20 11:37:41 mac com.apple.KernelEventAgent[34]: KernelEventAgent: sysctl_queryfs: No such file or directory
Mar 20 11:37:43: --- last message repeated 1 time ---
Mar 20 11:37:43 mac Software Update[19168]: Terminating
Mar 20 11:37:43 mac ManagedClient[19165]: CGSShutdownServerConnections: Detaching application from window server
Mar 20 11:37:43 mac com.apple.loginwindow[19160]: Thu Mar 20 11:37:43 mac.local ManagedClient[19165] <Warning>: CGSShutdownServerConnections: Detaching application from window server
Mar 20 11:37:43 mac ManagedClient[19165]: CGSDisplayServerShutdown: Detaching display subsystem from window server
Mar 20 11:37:43 mac com.apple.loginwindow[19160]: Thu Mar 20 11:37:43 mac.local ManagedClient[19165] <Warning>: CGSDisplayServerShutdown: Detaching display subsystem from window server
Mar 20 11:37:44 mac ManagedClient[19165]: HIToolbox: received notification of WindowServer event port death.
Mar 20 11:37:44 mac ManagedClient[19165]: port matched the WindowServer port created in BindCGSToRunLoop
Mar 20 11:37:44 mac com.apple.loginwindow[19160]: 2008-03-20 11:37:44.228 ManagedClient[19165:10b] HIToolbox: received notification of WindowServer event port death.
Mar 20 11:37:44 mac com.apple.loginwindow[19160]: 2008-03-20 11:37:44.229 ManagedClient[19165:10b] port matched the WindowServer port created in BindCGSToRunLoop
Mar 20 11:37:44 mac com.apple.SystemStarter[28]: Stopping Privoxy
Mar 20 11:37:44 mac Parallels[19185]: Stopping DHCP/NAT daemon...
Mar 20 11:37:45 mac com.apple.SystemStarter[28]: Mar 20 11:37:45 Privoxy(000002dc) Info: exiting by signal 15 .. bye
Mar 20 11:37:46 mac Parallels[19192]: Unloading Network module...
Mar 20 11:37:46 mac com.apple.SystemStarter[28]: kextunload: unload kext /System/Library/Extensions/Pvsnet.kext succeeded
Mar 20 11:37:46 mac Parallels[19194]: Unloading ConnectUSB module...
Mar 20 11:37:46 mac com.apple.SystemStarter[28]: kextunload: unload kext /System/Library/Extensions/ConnectUSB.kext succeeded
Mar 20 11:37:46 mac Parallels[19196]: Unloading Monitor module...
Mar 20 11:37:47 mac mds[32]: (Error) Import: importer:0x847600 Importer start failed for -2 (kr:268435459 (ipc/send) invalid destination port)
Mar 20 11:37:47 mac mds[32]: (Fatal) Server: Assertion failure in -[MDSServiceUtil machPortForBootstrapName:targetClassName:andUid:usingRosetta:] (/SourceCache/Spotlight/Spotlight-398.7/server/MDSWorkerProcess/MDSServiceUtil. m:98) -- Mach error 1105: unknown error code
Mar 20 11:37:47 mac mdworker[19166]: (Fatal) Import: Importer mach message failure on request work: (-308) (ipc/mig) server died
Mar 20 11:37:47 mac com.apple.launchd[1] (com.apple.metadata.mds[32]): Exited abnormally: Illegal instruction
Mar 20 11:37:49 mac com.apple.SystemStarter[28]: kextunload: unload kext /System/Library/Extensions/vmmain.kext succeeded
Mar 20 11:37:49 mac kernel[0]: [Parallels] Parallels VM observer thread stopped
Mar 20 11:37:49 mac Parallels[19200]: Unloading Hypervisor module...
Mar 20 11:37:49 mac com.apple.SystemStarter[28]: kextunload: unload kext /System/Library/Extensions/hypervisor.kext succeeded
Mar 20 11:37:49 mac kernel[0]: [Parallels] Parallels Hypervisor exited.
Mar 20 11:37:49 mac Parallels[19202]: Shutdown complete.
Mar 20 12:06:54 localhost kernel[0]: npvhash=4095
Mar 20 12:06:48 localhost com.apple.launchctl.System[2]: fsck_hfs: Volume is journaled. No checking performed.
Mar 20 12:06:48 localhost com.apple.launchctl.System[2]: fsck_hfs: Use the -f option to force checking.
Mar 20 12:06:53 localhost com.apple.launchctl.System[2]: launchctl: Please convert the following to launchd: /etc/machinit.d/airportwps.plist
Mar 20 12:06:53 localhost com.apple.launchctl.System[2]: launchctl: Please convert the following to launchd: /etc/mach_init.d/dashboardadvisoryd.plist
Mar 20 12:06:53 localhost com.apple.launchd[1] (org.cups.cupsd): Unknown key: SHAuthorizationRight
Mar 20 12:06:53 localhost com.apple.launchd[1] (org.ntp.ntpd): Unknown key: SHAuthorizationRight
Mar 20 12:06:54 localhost DirectoryService[11]: Launched version 5.2 (v514.4)
Mar 20 12:06:55 localhost kernel[0]: hi mem tramps at 0xffe00000
Mar 20 12:06:54 localhost DirectoryService[11]: WARNING - dsTouch: file was asked to be opened </Library/Preferences/DirectoryService/.DSIsRunning>: (File exists)
Mar 20 12:06:55 localhost kernel[0]: PAE enabled
Mar 20 12:06:55 localhost kernel[0]: Darwin Kernel Version 9.2.0: Tue Feb 5 16:13:22 PST 2008; root:xnu-1228.3.13~1/RELEASE_I386
Mar 20 12:06:55 localhost kernel[0]: standard timeslicing quantum is 10000 us
Mar 20 12:06:56 localhost kernel[0]: vmpagebootstrap: 508294 free pages and 15994 wired pages
Mar 20 12:06:56 localhost kernel[0]: migtable_maxdispl = 79
Mar 20 12:06:56 localhost kernel[0]: 102 prelinked modules
Mar 20 12:06:56 localhost kernel[0]: AppleACPICPU: ProcessorApicId=0 LocalApicId=0 Enabled
Mar 20 12:06:56 localhost kernel[0]: AppleACPICPU: ProcessorApicId=1 LocalApicId=1 Enabled
Mar 20 12:06:56 localhost kernel[0]: Loading security extension com.apple.security.TMSafetyNet
Mar 20 12:06:56 localhost kernel[0]: calling mpopolicyinit for TMSafetyNet
Mar 20 12:06:56 localhost kernel[0]: Security policy loaded: Safety net for Time Machine (TMSafetyNet)
Mar 20 12:06:56 localhost kernel[0]: Loading security extension com.apple.nke.applicationfirewall
Mar 20 12:06:56 localhost kernel[0]: Loading security extension com.apple.security.seatbelt
Mar 20 12:06:56 localhost kernel[0]: calling mpopolicyinit for mb
Mar 20 12:06:56 localhost kernel[0]: Seatbelt MACF policy initialized
Mar 20 12:06:56 localhost kernel[0]: Security policy loaded: Seatbelt Policy (mb)
Mar 20 12:06:56 localhost kernel[0]: Copyright (c) 1982, 1986, 1989, 1991, 1993
Mar 20 12:06:56 localhost kernel[0]: The Regents of the University of California. All rights reserved.
Mar 20 12:06:54 localhost mDNSResponder mDNSResponder-170 (Jan 4 2008 18:04:07)[15]: starting
Mar 20 12:06:56 mac com.apple.launchctl.Background[18]: launchctl: Dubious ownership on file (skipping): /Library/LaunchAgents/com.norman.postip.plist
Mar 20 12:06:54 mac kextd[10]: 416 cached, 0 uncached personalities to catalog
Mar 20 12:06:57 mac kernel[0]: MAC Framework successfully initialized
Mar 20 12:06:57 mac kernel[0]: using 10485 buffer headers and 4096 cluster IO buffer headers
Mar 20 12:06:57 mac com.apple.launchctl.System[2]: bind(): Address already in use
Mar 20 12:06:57 mac com.apple.launchd[1] (com.apple.ftpd): Unknown key: SHAuthorizationRight
Mar 20 12:06:57 mac com.apple.launchd[1] (com.openssh.sshd): Unknown key: SHAuthorizationRight
Mar 20 12:06:57 mac com.apple.launchctl.System[2]: com.openssh.sshd: Already loaded
Mar 20 12:06:57 mac kernel[0]: devfsmakenode: not ready for devices!
Mar 20 12:06:56 mac configd[14]: setting hostname to "mac.local"
Mar 20 12:06:57 mac kernel[0]: IOAPIC: Version 0x20 Vectors 64:87
Mar 20 12:06:57 mac kernel[0]: ACPI: System State [S0 S3 S4 S5] (S3)
Mar 20 12:06:57 mac kernel[0]: mbinit: done
Mar 20 12:06:57 mac kernel[0]: Security auditing service present
Mar 20 12:06:57 mac kernel[0]: BSM auditing present
Mar 20 12:06:57 mac kernel[0]: rooting via boot-uuid from /chosen: 97B08CD9-6153-325F-B089-A6649A6E9ACC
Mar 20 12:06:57 mac kernel[0]: Waiting on <dict ID="0"><key>IOProviderClass</key><string ID="1">IOResources</string><key>IOResourceMatch</key><string ID="2">boot-uuid-media</string></dict>
Mar 20 12:06:57 mac kernel[0]: FireWire (OHCI) Lucent ID 5811 built-in now active, GUID 0017f2fffe66baa8; max speed s400.
Mar 20 12:06:57 mac kernel[0]: Got boot device = IOService:/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/SATA@1F,2/AppleAHCI/PRT2 @2/IOAHCIDevice@0/AppleAHCIDiskDriver/IOAHCIBlockStorageDevice/IOBlockStorageDri ver/ST9120821AS Media/IOGUIDPartitionScheme/Customer@2
Mar 20 12:06:57 mac kernel[0]: BSD root: disk0s2, major 14, minor 2
Mar 20 12:06:57 mac kernel[0]: jnl: unknown-dev: replay_journal: from: 7568896 to: 5627904 (joffset 0xa701000)
Mar 20 12:06:57 mac kernel[0]: CSRHIDTransitionDriver::start []
Mar 20 12:06:57 mac kernel[0]: CSRHIDTransitionDriver::switchToHCIMode legacy
Mar 20 12:06:57 mac kernel[0]: USBF: 2.712 CSRHIDTransitionDriver[0x4176680](IOUSBCompositeDevice) GetFullConfigDescriptor(0) returned NULL
Mar 20 12:06:57 mac kernel[0]: CSRHIDTransitionDriver... done
Mar 20 12:06:57 mac kernel[0]: jnl: unknown-dev: journal replay done.
Mar 20 12:06:57 mac kernel[0]: HFS: Removed 1 orphaned unlinked files or directories
Mar 20 12:06:57 mac kernel[0]: Jettisoning kernel linker.
Mar 20 12:06:57 mac kernel[0]: Resetting IOCatalogue.
Mar 20 12:06:57 mac kernel[0]: GFX0: family specific matching fails
Mar 20 12:06:57 mac kernel[0]: display: family specific matching fails
Mar 20 12:06:57 mac kernel[0]: Matching service count = 1
Mar 20 12:06:57 mac kernel[0]: Matching service count = 17
Mar 20 12:06:57: --- last message repeated 4 times ---
Mar 20 12:06:57 mac kernel[0]: display: family specific matching fails
Mar 20 12:06:57 mac kernel[0]: Previous Shutdown Cause: 3
Mar 20 12:06:57 mac kernel[0]: GFX0: family specific matching fails
Mar 20 12:06:57 mac kernel[0]: yukon: Ethernet address 00:16:cb:a7:06:f4
Mar 20 12:06:58 mac kernel[0]: AppleYukon2 - en0 link active, 100-Mbit, full duplex, symmetric flow control enabled port 0
Mar 20 12:07:02 mac com.apple.dnbobserverd[43]: bfobserver: Starting up (pid: 43).
Mar 20 12:07:02 mac bootlog[47]: BOOT_TIME: 1206036398 0
Mar 20 12:07:02 mac rpc.statd[31]: statd.notify - no notifications needed
Mar 20 12:07:02 mac VMware Fusion 43733[53]: Starting VMware Fusion:
Mar 20 12:07:02 mac com.vmware.launchd.vmware[51]: VMware Fusion 43733: Starting VMware Fusion:
Mar 20 12:07:03 mac kernel[0]: ALF ALERT: sockwallcntlupdaterules ctl_enqueuedata rts err 55
Mar 20 12:07:04: --- last message repeated 10 times ---
Mar 20 12:07:04 mac fseventsd[39]: bumping event counter to: 0x5e5b9f (current 0x0) from log file '00000000005cad07'
Mar 20 12:07:04 mac blued[48]: Apple Bluetooth daemon started.
Mar 20 12:07:04 mac com.apple.kextd[10]: kld(): Undefined symbols:
Mar 20 12:07:04 mac com.apple.kextd[10]: __ZN16IO80211Interface11postMessageEi
Mar 20 12:07:04 mac com.apple.kextd[10]: _ZN16IO80211Interface22monitorModeInputPacketEP6_mbuf
Mar 20 12:07:04 mac com.apple.kextd[10]: _ZN17IO80211Controller20outputRaw80211PacketEP16IO80211InterfaceP6_mbuf
Mar 20 12:07:04 mac kextd[55]: kldload_frommemory() failed for module /System/Library/Extensions/IO80211Family.kext/Contents/PlugIns/AirPortAtheros54 24.kext/Contents/MacOS/AirPortAtheros5424
Mar 20 12:07:04 mac kernel[0]: ath_attach: devid 0x1c
Mar 20 12:07:04 mac kextd[55]: a link/load error occured for kernel extension /System/Library/Extensions/IO80211Family.kext/Contents/PlugIns/AirPortAtheros54 24.kext
Mar 20 12:07:06 mac kernel[0]: mac 10.3 phy 6.1 radio 10.2
Mar 20 12:07:06 mac kernel[0]: AirPort_Athr5424ab: Ethernet address 00:17:f2:4d:7b:01
Mar 20 12:07:06 mac /System/Library/CoreServices/loginwindow.app/Contents/MacOS/loginwindow[34]: Login Window Application Started
Mar 20 12:07:06 mac com.vmware.launchd.vmware[51]: kextload: kmod_control/start failed for com.vmware.kext.vmmon; destroying kmod
Mar 20 12:07:06 mac com.vmware.launchd.vmware[51]: kextload: a link/load error occured for kernel extension /Library/Application Support/VMware Fusion/kexts/vmmon.kext
Mar 20 12:07:06 mac com.vmware.launchd.vmware[51]: link/load failed for extension /Library/Application Support/VMware Fusion/kexts/vmmon.kext
Mar 20 12:07:06 mac com.vmware.launchd.vmware[51]: (run kextload with -t for diagnostic output)
Mar 20 12:07:06 mac com.apple.launchd[1] (com.vmware.launchd.vmware[51]): Exited with exit code: 1
Mar 20 12:07:07 mac kernel[0]: vmmon: Initializing module.
Mar 20 12:07:07 mac kernel[0]: vmmon: Warning: Cannot create the empty task: 5.
Mar 20 12:07:07 mac Parallels[74]: Loading Hypervisor module...
Mar 20 12:07:07 mac com.apple.SystemStarter[29]: Starting Privoxy
Mar 20 12:07:07 mac com.apple.SystemStarter[29]: kextload: extension /System/Library/Extensions/hypervisor.kext is already loaded
Mar 20 12:07:07 mac kernel[0]: [Parallels] Parallels Hypervisor started.
Mar 20 12:07:07 mac Parallels[80]: Loading Monitor module...
Mar 20 12:07:07 mac com.apple.SystemStarter[29]: Mar 20 12:07:07 Privoxy(000002dc) Info: loading configuration file '/Library/Privoxy/config':
Mar 20 12:07:08 mac kernel[0]: [Parallels] Parallels VM observer thread started
Mar 20 12:07:07 mac com.apple.SystemStarter[29]: Mar 20 12:07:07 Privoxy(000002dc) Info: Privoxy version 3.0.6
Mar 20 12:07:07 mac com.apple.SystemStarter[29]: Mar 20 12:07:07 Privoxy(000002dc) Info: Program name: ./privoxy
Mar 20 12:07:07 mac com.apple.SystemStarter[29]: Mar 20 12:07:07 Privoxy(000002dc) Info: Listening on port 8118 for local connections only
Mar 20 12:07:07 mac com.apple.SystemStarter[29]: kextload: extension /System/Library/Extensions/vmmain.kext is already loaded
Mar 20 12:07:07 mac com.apple.SystemStarter[29]: kextload: extension /System/Library/Extensions/ConnectUSB.kext is already loaded
Mar 20 12:07:08 mac com.apple.SystemStarter[29]: kextload: extension /System/Library/Extensions/Pvsnet.kext is already loaded
Mar 20 12:07:07 mac Parallels[84]: Loading ConnectUSB module...
Mar 20 12:07:08 mac kernel[0]: display: Not usable
Mar 20 12:07:07 mac Parallels[86]: Loading Network module...
Mar 20 12:07:08 mac Parallels[88]: Loading Virtual Ethernet module...
Mar 20 12:07:08 mac com.apple.SystemStarter[29]: kextload: /Library/StartupItems/Parallels/Pvsvnic.kext loaded successfully
Mar 20 12:07:09 mac kernel[0]: comparallels_kextPvsvnic1: Ethernet address 00:1c:42:00:00:01
Mar 20 12:07:09 mac kernel[0]: comparallels_kextPvsvnic0: Ethernet address 00:1c:42:00:00:00
Mar 20 12:07:09 mac Parallels[91]: Staring DHCP/NAT daemon...
Mar 20 12:07:10 mac Parallels[95]: Restarting InternetSharing...
Mar 20 12:07:10 mac Parallels[97]: Restaring CiscoVPN...
Mar 20 12:07:10 mac com.apple.SystemStarter[29]: /Library/StartupItems/Parallels/Parallels: line 62: /System/Library/StartupItems/CiscoVPN/CiscoVPN: No such file or directory
Mar 20 12:07:10 mac Parallels[99]: Initialization complete.
Mar 20 12:07:13 mac kernel[0]: ALF ALERT: sockwallcntlupdaterules ctl_enqueuedata rts err 55
Mar 20 12:07:16 mac kextd[10]: writing kernel link data to /var/run/mach.sym
Mar 20 12:07:17 mac /usr/sbin/ocspd[107]: starting
Mar 20 12:07:17 mac kernel[0]: ALF ALERT: sockwallcntlupdaterules ctl_enqueuedata rts err 55
Mar 20 12:07:27 mac kernel[0]: AirPort: Link Up on en1
Mar 20 12:07:29 mac com.apple.launchctl.LoginWindow[111]: launchctl: Dubious ownership on file (skipping): /Library/LaunchAgents/com.norman.postip.plist
Mar 20 12:07:30 mac airportd[56]: Error: Apple80211Associate() failed -25
Mar 20 12:07:42 mac airportd[56]: Could not find any preferred networks; trying broadcast requests..
Mar 20 12:07:43 mac com.apple.launchctl.Background[113]: launchctl: Dubious ownership on file (skipping): /Library/LaunchAgents/com.norman.postip.plist
Mar 20 12:07:45 mac kernel[0]: AirPort: Link Up on en1
Mar 20 12:07:45 mac kernel[0]: disk0s2: memory allocation error.
Mar 20 12:07:46 mac kernel[0]:
Mar 20 12:07:47 mac kernel[0]:
Mar 20 12:07:48 mac com.apple.launchctl.System[2]: BootCacheControl: could not fetch history: Cannot allocate memory
Mar 20 12:07:48 mac com.apple.launchctl.System[2]: BootCacheControl: could not stop cache/fetch history: Cannot allocate memory
Mar 20 12:07:48 mac airportd[56]: Error: Apple80211Associate() failed -25
Mar 20 12:07:49 mac mDNSResponder[15]: Note: Frequent transitions for interface en1 (FE80:0000:0000:0000:0217:F2FF:FE4D:7B01); network traffic reduction measures in effect
Mar 20 12:07:53 mac mDNSResponder[15]: Note: Frequent transitions for interface en1 (FE80:0000:0000:0000:0217:F2FF:FE4D:7B01); network traffic reduction measures in effect
Mar 20 12:08:01 mac loginwindow[34]: Login Window Started Security Agent
Mar 20 12:08:01 mac kernel[0]: hfs: early journal init: volume on disk1s3 is read-only and journal is dirty. Can not mount volume.
Mar 20 12:08:01 mac mds[33]: (/Volumes/Time Machine/.Spotlight-V100/Store-V1/Stores/A932E7ED-416E-4ACB-92E4-B0E0B4D65364)(E rror) IndexCI in ContentIndexOpenBulk:Could not open /Volumes/Time Machine/.Spotlight-V100/Store-V1/Stores/A932E7ED-416E-4ACB-92E4-B0E0B4D65364/li ve.0.; needs recovery
Mar 20 12:08:01 mac kernel[0]: jnl: disk1s3: replay_journal: from: 7021056 to: 14006272 (joffset 0xacd000)
Mar 20 12:08:02 mac authorizationhost[132]: MechanismInvoke 0x127640 retainCount 2
Mar 20 12:08:02 mac SecurityAgent[141]: MechanismInvoke 0x101620 retainCount 1
Mar 20 12:08:03 mac mds[33]: (/Volumes/Time Machine/.Spotlight-V100/Store-V1/Stores/A932E7ED-416E-4ACB-92E4-B0E0B4D65364)(E rror) IndexStore in SIStoreDirytySDBChunks:Error storing dirty sdb pages: 30
Mar 20 12:08:06 mac kernel[0]: jnl: disk1s3: journal replay done.
Mar 20 12:08:06 mac authorizationhost[132]: MechanismDestroy 0x127640 retainCount 2
Mar 20 12:08:06 mac SecurityAgent[141]: MechanismDestroy 0x101620 retainCount 1
Mar 20 12:08:06 mac loginwindow[34]: Login Window - Returned from Security Agent
Mar 20 12:08:06 mac loginwindow[34]: USER_PROCESS: 34 console
Mar 20 12:08:06 mac com.apple.dnbobserverd[43]: ClientGotSpace: Client 0x1032d0 lifted write-side flow control.
Mar 20 12:08:06 mac com.apple.launchd[1] (com.apple.UserEventAgent-LoginWindow[114]): Exited: Terminated
Mar 20 12:08:06 mac com.apple.dnbobserverd[43]: ClientGotData: Client 0x1032d0 died unexpectedly.
Mar 20 12:08:06 mac com.apple.launchctl.Aqua[151]: launchctl: Please convert the following to launchd: /etc/machinit_peruser.d/PCIESlotCheck.plist
Mar 20 12:08:06 mac com.apple.launchctl.Aqua[151]: launchctl: Please convert the following to launchd: /etc/machinit_peruser.d/RemoteUI.plist
Mar 20 12:08:07 mac com.apple.launchd[148] (0x100ed0.PCIESlotCheck): Failed to check-in!

Similar Messages

Office 2013 latest update broke new profile creation on all network computers

Hi,
Reporting a bug here!
Setup details:
We're using samba 3 as our backend and all workstation are Windows 7 Pro x64.
Office 2013 Home and Business Retail (en-us) Click 2 Run version
Context:
Deployed to the whole network of one of our client using the Office Deployement Tool.
We update their base update (no updates) to the latest update 15.0.4569.1508
Everything was working alright after initial Office 2013 installation with no updates. After updating the all the PCs to the latest version as of 31/03/2014, the user profile creation broke for newly created user.
Symptoms and causes:
Trying to log on as a new user on the machine would give the following error on Logon before automatically loging off because it cannot copy the following file to the new user profile:
D:\Users\Default\AppData\Local\Microsoft\Windows Live\Bici\_00.sqm
D:\Users\Default\AppData\Local\Microsoft\Windows Live\Bici\_01.sqm
D:\Users\Default\AppData\Local\Microsoft\Windows Live\Bici\_02.sqm
The Bici folder has Read and Execute permissions for everyone but the _XX.sqm files inside only have permissions (Full Control) for SYSTEM and Administrators and LOCAL SERVICE with the all permissions EXCEPT:
- FULL CONTROL
- TRAVERSE FOLDERS/EXECUTE FILES
- CHANGE PERMISSIONS
- TAKE OWNERSHIP
Solution:
I gave "everyone" Read and Execute permission on those files and the new user could log in and his profile got created alright.
The files with broken permissions time stamp shows they've been modified during the Office 2013 update and Bici seems to be a OneDrive related service. This bug should get fixed ASAP.
Event log error:
Windows cannot copy file \\?\D:\Users\Default\AppData\Local\Microsoft\Windows Live\Bici\_01.sqm to location \\?\D:\Users\TEMP\AppData\Local\Microsoft\Windows Live\Bici\_01.sqm. This error may be caused by network problems or insufficient security rights.
DETAIL - Access is denied.
- <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
- <System>
<Provider Name="Microsoft-Windows-User Profiles General" Guid="{DB00DFB6-29F9-4A9C-9B3B-1F4F9E7D9770}" />
<EventID>1509</EventID>
<Version>0</Version>
<Level>3</Level>
<Task>0</Task>
<Opcode>0</Opcode>
<Keywords>0x8000000000000000</Keywords>
<TimeCreated SystemTime="2014-04-04T07:15:51.922563800Z" />
<EventRecordID>9615</EventRecordID>
<Correlation />
<Execution ProcessID="940" ThreadID="1764" />
<Channel>Application</Channel>
<Computer>F00241D1DAAAD</Computer>
<Security UserID="S-1-5-21-1582357797-4105456612-768596941-1206" />
</System>
- <EventData Name="EVENT_COPYERROR">
<Data Name="Source">\\?\D:\Users\Default\AppData\Local\Microsoft\Windows Live\Bici\_01.sqm</Data>
<Data Name="Target">\\?\D:\Users\TEMP\AppData\Local\Microsoft\Windows Live\Bici\_01.sqm</Data>
<Data Name="Error">Access is denied.</Data>
</EventData>
</Event>

Hi dude,
I appreciate that your sharing your experience and solution here. And, I would report it through our internal channel. Thanks again.
Tony Chen
TechNet Community Support

Latest update broke pdf reading in scripts?

I use a lot of datasheet catalogs and such and most of them use scripts to load pdf data sheets, however after the latest update I can't open them, I either get a error 130:103 or something like that (gotten it a few times) that tells me to turn off adobe if it is running, or I just get a blank/black page or a blue loading bar that stops at 100% (full bar).
I'm using Win7 with latest updates, I've tried removing and reinstalling adobe reader, the reader works without issues on normal pdf on my computer (not thrilled over the new design to be honest), the sites work as I have no problem with the exact same pdf on Linux, it worked without any issue until last update.
Any idea how I can fix this problem?

Should add, half a solution is changing the browser to load the normal adobe reader and not adobe in firefox, works for now but really annoying with multiple windows up instead of tabs.

After latest update (11. something) most of my library is gone

I don't know what I did, or what itunes did, but I downloaded the latest update and then synced my ipod touch and ran out the door. When I returned, I was looking for a particular album and that's when I realized that 70% or more of my library is gone. It's not in my music files in My Computer. I don't know where to look for it. I had songs/albums in my library that I no longer have the CDs for. Most of that music was sentimental things. Please help!

See this post.
tt2

RazrM: Latest update 'broke' the phone

Just received a replacement RazorM and still having a problem that I attribute to the latest update. Phone seems very slow and the camera doesn't work at all most of the time. Also, phone is freezing and is difficult to restart.
Anyone else having these issues? Is there a way to rollback to prior Android release?

http://www.nokia.co.uk/nokia/0,,58162,00.html
Gadget
Remember to mark all correctly answered questions as Solved. A forum is only as great as the sum of its parts, together we will prevail.

Latest update broke xscreensaver

I am using
dbus-send --system --print-reply --dest="org.freedesktop.UPower" /org/freedesktop/UPower org.freedesktop.UPower.Suspend
to suspend my laptop. I also have xscreensaver which asks for password upon resume or upon 5 minutes of not using the computer.
Since the last Arch update yesterday, upon resume all I can see is just mouse cursor, which I can move, but the xscreensaver box with field to type in the password doesn't appear, even though xscreensaver is blanking the entire screen.
This does not happen upon boot or upon time-out, when xscreensaver box appears instantly if I press any key or move mouse cursor.

I don't really see how your issue is similar (except for the fact that xscreensaver is one of the affected packages).
Now, if you would just make an effort (other than posting extremely detailed posts such as your latest one) and copy/paste that error into the forum's search box; you'll find roughly a dozen threads explaining exactly how to fix it.

Latest updates broke my system, anyone else?

I just performed a pacman -Syu and installed the following updates:
[09/09/06 23:40] upgraded initscripts (0.7.2-5 -> 0.7.2-7)
[09/09/06 23:40] upgraded kernel26 (2.6.17.11-1 -> 2.6.17.13-1.1)
[09/09/06 23:41] upgraded lftp (3.5.4-1 -> 3.5.4-2)
[09/09/06 23:41] upgraded libgl-dri (6.4.2-2 -> 6.5.1rc2-1)
[09/09/06 23:41] upgraded libmysqlclient (5.0.24-1 -> 5.0.24a-1)
[09/09/06 23:41] upgraded libwmf (0.2.8.4-3 -> 0.2.8.4-4)
[09/09/06 23:41] upgraded libxfixes (3.0.1.2-2 -> 4.0.1-1)
[09/09/06 23:41] warning: extracting /etc/lilo.conf as /etc/lilo.conf.pacnew
[09/09/06 23:41] upgraded lilo (22.7.2-1 -> 22.7.3-1)
[09/09/06 23:41] upgraded m4 (1.4.5-1 -> 1.4.6-1)
[09/09/06 23:41] upgraded man-pages (2.36-1 -> 2.39-1)
[09/09/06 23:41] upgraded mesa (6.4.2-1 -> 6.5.1rc2-1)
[09/09/06 23:41] upgraded musicbrainz (2.1.4-1 -> 2.1.4-2)
[09/09/06 23:41] upgraded openssl (0.9.8b-1 -> 0.9.8c-1)
[09/09/06 23:41] upgraded shadow (4.0.14-1 -> 4.0.18.1-1)
[09/09/06 23:41] upgraded smbclient (3.0.23B-2 -> 3.0.23C-1)
[09/09/06 23:41] upgraded sysfsutils (2.0.0-1 -> 2.1.0-1)
[09/09/06 23:41] upgraded xf86-input-keyboard (1.0.1.3-1 -> 1.1.0-1)
[09/09/06 23:41] upgraded xf86-input-mouse (1.0.4-1 -> 1.1.1-1)
[09/09/06 23:41] upgraded xf86-video-savage (2.0.2.3-1 -> 2.1.1-2)
[09/09/06 23:41] upgraded xf86-video-vesa (1.0.1.3-1 -> 1.2.1-1)
[09/09/06 23:41] upgraded xorg-server (1.0.2-3 -> 1.1.1-2)
[09/09/06 23:50] synchronizing package lists
[09/09/06 23:50] starting full system upgrade
I had rebooted prior to running the pacman -Syu and everything was fine. I rebooted after the updates and was presented with a console login instead of a KDE login. I tried startx at the console login and was presented with errors about my ~/.xinitrc . I found exec startkde commented out and replaced with exec wmaker. I never installed wmaker or gnome or anything else, only KDE. I made the change and tried startx again. I got another error that /usr/lib/libexpat.so.0 could not be found. I created a softlink in /usr/lib from libexpat.so to libexpart.so.0 . I attemped another startx and finally was presented with my KDE desktop. The fonts seem a little different, but I am not sure if this is me thinking something is wrong or if there is a font problem. They seem smaller and thinner to me. Everytime I perform a pacman -Syu I do received this error:
fontconfig: local (2.3.95-1) appears to be newer than repo (current/2.3.2-7)
I think I added that fontconfig package a few months ago to prevent another problem but I do not recall. I receive no font loading problems in my Xorg.log file or when it starts. Anyone else?

[ronald@linux-pressh ~]$ pacman -Qo /usr/lib/libexpat.so.0
/usr/lib/libexpat.so.0 is owned by expat 1.95.8-2
You do not have to create the link to libexpat, you need to install expat if you have not done so, or reinstall if you have done so (in that case the package seems te got corrupted)
About the fontconfig message, is not an error, just a message. If you want do downgrade to the repo version, you have to manually do: pacman -S fontconfig

Latest update broke window snapping for me...

I cannot hold the Windows key + an Arrow key to get a window to snap any more :( Really annoying for someone who has multiple monitors where dragging to the sides does not work.

Here is a confirmation from MSFT that the snap assist feature is broken in MSFT and will be corrected in future builds (hopefully in 1 month I hope ... guessing ...)
https://social.technet.microsoft.com/Forums/en-US/b82948e0-5a89-49e4-be97-b183fd10ca39/snap-assist-doesnt-work-on-build-9860?forum=WinPreview2014General
We're aware of snap assist and shortcut key problems with 9860. We don't have a workaround at this time, sorry. It is fixed in future builds and we will get that out to you as quickly as we can.
Gabe Aul [MSFT] Microsoft (MSFT)

Anyone having printing problems after latest update?

I could print right up to the time I installed the newest update last night.
Help!

In a follow up, The printers are a brother mfc-4800 and an Epson 870. It seems like Apple in the latest update did something to make the software so secure that you are not allowed to print whats in your computer?
Hey Apple can you update the update? My other drive is loaded with the 10.4.4 and everything works

Latest iTunes update broke Nano 7G detection/sync

The latest update to iTunes (v11.3.0.54) for PC has broken my ability to connect my Nano 7G and sync.
First let me give you the conditions.
I have 2 PCs. Both are running Windows 8.1 with all Windows updates installed. PC 1 is my main desktop and I recently updated iTunes to the latest version, 11.3.0.54. PC 2 is a laptop that is still running v.11.2.2.3. After the update I attempted to connect my Nano to PC 1 and was given this error message.
"An iPod has been detected, but it could not be identified properly. Please disconnect and reconnect the iPod, then try again. If the problem persists, uninstall iTunes, then install iTunes again"
After clicking OK, the iPod does not appear to be detected or connected to iTunes. It also does not show up in My Computer as an attached device, and does not show up in Device Manager as either a USB device or Portable device.
At first I thought I had just broken the Nano, but I attempted to connect it to PC 2 running the earlier version of iTunes and it works 100% perfectly. I have indeed tried uninstalling and re-installing iTunes multiple times, rolling back to an earlier version on PC 1 (which won't load due to the library file being modified by the later version) and then upgrading again. I have tried connecting on multiple USB ports and used 2 different USB/Lightning cables. All work fine with PC 2 running the older version, none work with PC 1 running the latest. I have tried doing a reset of the Nano while disconnected and connected. Both fail.
Again the iPod worked fine before the update and still works fine on a PC with an identical operating system/updates running an earlier version of iTunes. Is this something I can fix myself? How? Or is it something I will just have to wait for Apple to patch?

Hello joejoehoppy,
Look for it to pop up next to the iTunes Store icon. Also check out the article below to troubleshoot your iPod nano connecting to iTunes.
iPod not appearing in iTunes
http://support.apple.com/kb/TS3716
Thanks for using Apple Support Communities.
Regards,
-Norm G.

Since the latest update I am unable to carry a search from one playlist over to another. Is there something in settings that would allow me to do this?

Since the latest update I am unable to carry a search from one playlist over to another (example: looking for one song or one artist over several different playlists looking for duplicates). Is there something in settings that would allow me to do this?

The T1i was first supported by Camera Raw 5.4 which is only compatible with CS4 and later
Camera Raw plug-in | Supported cameras
Camera Raw-compatible Adobe applications
Some options:
Upgrade to CS6
Join the Cloud
Download the free Adobe DNG converter, convert all T1i Raw files to DNGs then edit the DNGs in CS3
Camera raw, DNG | Adobe Photoshop CC

Latest Flash update broke fullscreen

I am used to watch youtube videos on full screen while doing other stuff. I pause the videos, alt tab to do stuff in other windows, then resume watching the video
But since latest update, whenever I alt tab while video is paused, it exits full screen mode, so I have to enable full screen again every time. This did not happen before update - I could watch videos and then just alt tab back to the full screen
Tried different computers and different browsers, so the problem is with Flash and not with something else
Please patch this is an EXTREME inconvenience for me and others as well most likely!

I'm sorry you're going through this. You might be running into a conflict with our Protected Mode which was introduced in Flash Player 11.4. Please try the troubleshooting steps outlined in this FAQ:
How do I troubleshoot Flash Player's protected mode for Firefox?
In particular, I'd recommend temporarily disabling protected mode (for troubleshooting purposes only) to see if that addresses the issue.
If the crashing continues, please open a new bug report on this issue over at bugbase.adobe.com. The following FAQ will walk you through the information we'll need and instructions for generating a crash log (if applicable):
How do I report a Flash Player crash to Adobe?
Once the bug has been added, please post back with the bug URL or bug number so that others effected can add their comments and votes.

With the latest update, i have some trouble with youtube. Every videos that i watch are shaking. Is there something to fix it?

With the latest update, i have some trouble with youtube. Every videos that i watch are shaking. Is there something to fix it?

Instantly worked, found this on other thread!!
1. System Preferences > Flash Player > Advanced > Delete All
Press the "Delete All" button
2. Safari > Preferences > Privacy
Press the button “ Remove All Website Data”.
*Dont forget to restart Safari

I'm afraid to do the latest update because in the past when I update I always loose something . Last time it was my "pinned" tabs. What is the solution?

I'm afraid to install the latest update because in the past when I update I always loose something . Last time it was my "pinned" tabs. What is the solution?

Hello,
Firefox automatically creates backups of your bookmarks, which can be helpful if your bookmarks are lost or missing. To recover them, follow the instructions below.
#Use <u>one</u> of these methods to open the Bookmarks Library window:
#*Click the ''[[Display the Firefox button menu instead of the menu toolbar|Firefox button]]'' to open the menu and click on ''Bookmarks''.
#*Click the ''Bookmarks'' menu and click on ''Show All Bookmarks''.
# At the top of the Library window, click the "Import and Backup" menu and select Restore.
# Click the date of the bookmark backup you want to recover.
# In the new window that appears, click OK.
# Your bookmarks from the selected date should now be restored.
For more information, see the [[Restore bookmarks from backup or move them to another computer]] article. For other solutions, see the [[Recover lost or missing Bookmarks]] article.
Thank you.

After the latest update to Photoshop 2014, something went wrong and started spray-like black oil on canvas. I have deadline with cover. Can you help me please?

How do I undo whatever went wrong after installing the latest update to Photoshop 2014 and suddenly when I tried to paint or touch up my illustration (book cover I'd drawn and painted, then scanned in and continued painting, changing. It's mostly done but I needed to send it like yesterday!!) OR touch up a photograph, black-like oily smudge-like substance sprayed around the point of the brush. I tried to fix by resetting but really didn't know what to do and probably made it worse. However, the problem happened after I updated the Photoshop Creative Cloud 2014 on my desktop 8.1 Windows and after a Tech helped update the regular CC Photoshop on my laptop 2007, 64 bit Windows to 2014. He promised to call back after giving it time to install but didn't for whatever reason on Friday. That happened to go up to the same update I did on my Windows 8.1 Windows. I have this deadline and really stressed. COULD IT BE THE UPDATE OR BOTH. REGARDLESS, CAN SOME EXPERT HELP ME UNDO WHATEVER THE UPDATE AND/OR I DID? I'm a God-gifted artist but only started using Photoshop CC, then updated to 2014--which, again, I like even better--when I began my monthly membership January or February 2014, although I had paid version 2002 and updated to paid version 2004 (ownership, not paid subscription like now). I've learned so much, including transforming, moving, stretching, with layers--all in the painting area with my illustrations--a little touch ups with photography. MY EMAIL IS: [email protected] I really appreciate any help. This needs to be resolved today, the latest tomorrow--I could call tomorrow, however. I was chatting with a Tech support but lost him about an hour or less back. I have the case number and name and gave him my contact number, but they won't be in until tomorrow. He's supposed to give info and escalate the case. I really need an answer--if possible, today. It may require going back to before installing the latest update. THANK YOU KINDLY. Glena Jessee-King

Update your graphics driver and/or turn off GPU acceleration in the Performance prefs.
Mylenium

Latest update broke something

Similar Messages

Maybe you are looking for