Latest update doesn't recognize iPod

After I updated iTunes yesterday, my iPod doesn't show up or sync. I know it's not the USB cable, because when attached to my computer, my iPod starts charging. It just won't appear on iTunes. I know I'm not the only one having this problem. Is there anyway to uninstall the latest update, or will we just have to wait until Apple creates something to fix the issue?

I'm running Windows 8.1 and ran into same issue.
Updated to latest version of iTunes, Windows could see the device but iTunes could not.
Here's how I fixed the issue:
Go to Device Manager:  winkey+pause/break on keyboard then select "Device Manager".
Look for "Apple Mobile Device USB Driver". 
It should be located under "Universal Serial Bus Controllers", mine was not.  It was found under "Mobile Devices".
If your driver is located under any heading other than, "Universal Serial Bus Controllers" iTunes will not recognize your device(s).  Be sure to search under all the device manager headers until you locate that specific driver.
Once you have found the driver location, make sure your device is plugged into a USB port on your PC/Laptop.
1. Right-click "Apple Mobile Device USB Driver" and select "uninstall".  Follow prompts to uninstall.
2. Right-click heading "Universal Serial Bus Controllers" and select "Scan for hardware changes".
    "Apple Mobile Device USB Driver" will now be installed under the proper heading and iTunes will discover and sync with your device(s).
Hope this helps,
Cheers!

Similar Messages

  • Everything deleted & iTunes & Updater doesn't recognize iPod

    Yeah, that's my problem. Funny thing is, I didn't do anything to the iPod to cause the problem. One day I was just adding songs to the iPod & using it like a hard drive (things I've done before with no problems) & then I turn it on two days later to find all my songs deleted. It was returned to factory settings when I didn't do anything.
    I hooked iPod up to my computer & it's not recognized by iTunes or the Updater. My computer, however, recognizes it & says that the iPod has the memory it did before the problem. I read the article for when iPod isn't recognized by iTunes or iPod, but I don't know if this would also apply because I also have the another problem. I didn't try this yet because I gave my iPod to some one to help me. He couldn't solve my problem so I'm turning it over to all of you.
    Thanks so much!

    Try Resetting Your iPod while it's connected to the computer.
    Hold down the Menu and Select buttons until you see the Apple logo (or Menu & Play/Pause in older models).
    This will often get it recognized. It may take several attempts.
    Also See:
    Your Windows PC doesn't recognize iPod
    iPod does not appear in iTunes or on the desktop
    iPod appears in Windows Explorer but does not appear in iTunes

  • IPod Updater doesn't recognize my iPod anymore

    The iPod Updater doesn't recognize my iPod Nano anymore. Only Windows recognizes it.
    What should I do now?

    Try downloading the Latest iPod Updater and then Restoring the iPod to factory settings.

  • On my ipod touch, i can't seem to get the imessage app.. I have updated my itunes and even restored the ipod to factory settings with the latest update. Maybe the ipod is too old? Help

    On my ipod touch, i can't seem to get the imessage app.. I have updated my itunes and even restored the ipod to factory settings with the latest update. Maybe the ipod is too old? Is that even a thing? Is there another app I can download to have access to my contacts with imessage?

    That comes with iOS 5 (Settings>General>About>Version) and only the 3G abd later iPods can go to iOS 5 or later
    Identifying iPod models

  • Windows 7 doesn't recognize ipod touch 4g

    windows 7 doesn't recognize ipod touch 4g.  I have restarted my computer and it doesn't work. I tried it yesterday and it work. I have tried it on my laptop and it recognize it. so what the problem?

    See:
    iOS: Device not recognized in iTunes for Windows
    I would start with
    Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
    Run this to help if it identifies the cause
    iTunes for Windows: Device Sync Tests

  • Imac 10.7.5 doesn't recognize iPod touch 32gb 5th gen, iPad and iPad mini all work ok

    imac 10.7.5 doesn't recognize iPod touch 32gb 5th gen, iPad and iPad mini all work ok.
    Itunes 11.3
    7.1.2 iPod touch 32gb, V/ 5th generation
    I just don't get it. I got the iPod from a friend which didn't use it at all. If I connect my iPad or iPad mini to my mac, they all get connected well and iTunes sees them too. iPod touch not for some reason
    The iPod touch is completely new, no missing contacts etc. It works on other macs as well. Only my iMac doesn't see the iPod Touch. Maybe I can repost this problem in The IMAC section in stead of the iPod Touch, since I think its a iMac problem from now on...
    please help!

    Iphone 5 lightning port charging problem - SOLUTION!
    - Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
    - Make an appointment at the Genius Bar of an Apple store.
      Apple Retail Store - Genius Bar

  • Ipod updater doesn't see ipod shuffle

    ipod updater doesn't see ipod shuffle...can any body help...

    Restore your Ipod from a Mac computer not a PC it will normally be reconized then by the Pc if not send it to the store

  • Itunes doesn't recognize ipod screen stuck on do not disconnect

    itunes doesn't recognize ipod screen stuck on do not disconnect

    Have you worked through each of the troubleshooting steps in this  support document yet?
    http://support.apple.com/kb/TS1410
    B-rock

  • Itunes doesn't recognize Ipod even though Itunes appears!!!!

    Itunes doesn't recognize Ipod even though Itunes pops up! I dropped it like 1 foot in the air once and landed on concrete. Now everything's fine until I play a song and it will just skip, freeze or just play a little bit and then skip. I don't think this is the problem but this is getting more wierd. I've tried almost every solution in this site but none of them worked so please, anyone, help me if you have a solution to this problem!!!

    When your iPod does not appear in iTunes:
    http://docs.info.apple.com/article.html?artnum=61771
    You might want to reset your iPod to prevent any more skipping and freezing. Press and hold the MENU and CENTER buttons - at the same time - until the Apple logo shows. This should take about 6 seconds. Also, you want to do this while your iPod is connected to your computer.
    When your iPod skips while playing a song:
    http://docs.info.apple.com/article.html?artnum=61018

  • ITunes doesn't recognize iPod since last software update

    I updated to iTunes 5.0.1 & iPod 2005-09-23 updater & now when I plug in the iPod w/ USB to my PowerBook G4 running 10.4.2, iTunes doesn't recognize it-- no icon in bottom-right grey area, nor left-hand column-- and the iPod says "Do not disconnect." Which means I'm kinda stuck. Tried restarting, didn't help. Advice? Thanks.

    I have the EXACT same problem. Support line suggeste that the iPod updater must have newer software than the iTunes, so I should go to Apple & download the iTunes update. Well, I did, and it didn't do a @#%ing thing to help. I'm NEW to mac & I'm P.O.'ed!!! (paid significantly extra money for iBook compared to Dell, etc since it's supposedly so easy & user-friendly... NOT an impressive start!!!)

  • ITunes & Updater doesn't recognize my iPod :(

    Hi,
    I have a 20GB iPod (wheel). I haven't had a problem with my iPod once until 3 days ago when I tryed to put in more music to my iPod. When I plugged in the usb line into my iPod and when into iTunes it didnt recognize my iPod. So, I reformated my computer to see if it helped but it didn't. So I tryed to restore my iPod using the updater, but it froze and didn't recognize my iPod..
    So I called the apple costumer support people asked them how to fix my iPod. They said to download the newest updater and itunes which i did and the problem still wasn't fixed. I also tryed restarting my ipod.
    Should I send in my iPod or go to a apple store near my house? Before I do this can someone give me some advices and tips... Please help me, I am bored out of my mind when I am on the cheese bus when going to school.
    you can reach me on AIM : irich1L
    please help me
    -Rich!

    You could take it to the nearest Apple Store where they will either connect it to a Mac, run RESTORE using the latest updater and return it to you or completely replace it. Regardless, your main problem is a connection issue concerning USB. I suggest moving to Firewire(that's what most of the Mac users use).
    http://www.kelleytown.com/ikelleytown.htm#top

  • Updater doesn't see iPod shuffle

    My iPod Shuffle shows up on the desktop. The amber recharge light is blinking. When iTunes opens, I get the following message: "iTunes has detected a software update for the iPod. Would you like to install it now?" When I click "Okay", the updater opens and I get the following message: "An unexpected error occurred". When I click "okay", the updater now tells me to plug in an iPod to update it. My iPod is plugged in and charging, and is on the desktop. When I quit the updater, my iPod does not appear in the iTunes source list.
    I then quit and reopened iTunes. This time when prompted regarding the software update, I click cancel. iTunes now opens with my iPod listed in the Source list. However, when I go to add songs to the iPod I get the following message: "Some of the songs in the iTunes music library were not copied to the iPod because your iPod software is too old. Go to www.apple.com/ipod to get the latest iPod software update."
    I've reinstalled the updater 3 times now. I got the same results as described above each time. The updater doesn't see the iPod. What is the "unexpected error"? Why doesn't the Updater see the iPod?
    Also also - I ordered, received, and installed an Iogear 4 port USB 2.0 pci card, hoping against hope that that would solve the issue. It didn't. I've been working on this since the day after Christmas. The problem seems so uniquely simple, and yet I've never been more frustrated with an Apple product.
    Why won't the updater recognize my iPod and allow me to install the software? I personally believe that there is some communications glitch between iTunes 6.0.1, OS 10.3.9, and iPod updater. Any word on new versions coming out of the Apple bat cave?
    Thanks for any help.
    a very frustrated... Gee
    Dual 1 GHz PowerPC G4   Mac OS X (10.3.9)  

    Restore your Ipod from a Mac computer not a PC it will normally be reconized then by the Pc if not send it to the store

  • Windows PC doesn't recognize iPod

    I have bought my iPod (20GB, click wheel) one year ago with an extended warranty of 3 years. It was working well all the time. But now my Windows computer doesn't recognize the iPod any more although I haven't changed anything on it.
    The battery can still be charged using the docking station. But as soon as I plug in the iPod on my laptop USB port the iPod freezes. The only message on my laptop screen says that the external hardware can not be recognized.
    The USB port is working properly.
    I have also tried to install the iPod update and to reset the iPod. Nothing is working. I guess I can't restore the iPod since it's not even recognized.
    Thanks, Annemarie

    I thought I was alone with this problem. I recently went traveling last weekend, and began to think the X-Ray machines killed my iPod!
    Whenever I connect my iPod to any computer using the USB connection, Windows will not mount it as a removable drive. The cable is good, because the iPod is being charged but Windows will not recognize it.
    I have tried all the different USB ports, even on several different computers. Including my work, laptop, and my desktop. Windows will not recognize my iPod using the USB connection.
    I'm in the process of restoring my desktop computer after a hard-drive failure (lucky me all my vital data were on a separate drive), so my desktop has a nice clean install of Windows.
    My desktop has a firewire port, so I tried connecting to that port and Ta-Da, Windows recognized and mounted my iPod as a removable drive! Unfortunately my laptop nor my work computers do not have firewire ports.
    Can anyone explain why the USB function suddenly stopped working? Does this mean I need to restore and loose all my music from my iPod? I do not let iTunes manage my music, I do that all myself. I can put my music back onto the device but it will be time consuming. If anyone knows the answer to this USB problem, perhaps you can reply to this thread or contact me.
    Thanks,
    Joe Vill

  • ITunes and iPod updater won't recognize iPod

    I'm running Windows XP and it shows the iPod is there but it won't show up in iTunes and iPod updater after 'initializing' for a good 5-10 minutes says either 'could not recognize the iPod' or if it does let me restore give the 'Firmware update failure. Diskwrite error.' I have the latest iTunes and iPod update and went through all the steps in the 'Windows recognizes iPod but iTunes does not' Troubleshooting help section. All these problems started when I tried to update with the new iPod updater software and got an error, everything worked fine before. I have also tried using a friends USB cable the problem is obviously in the Nano itself. Is there any way to safely format without using the iPod updater? or what should I try doing next?
    Also it seems like when the nano isn't plugged into a power source it drains the battery, with nothing showing on the screen because it always starts charging when I hook it up to the computer even though it was fully charge before.
    Thanks for any help.

    Hello,
    I too am having this exact same problem. My iPod nano was working perfectly until this "latest update" Since I installed that update my itunes and my ipod updater will NOT recognize my iPod. I am getting all the same error messages as you.
    I have done EVERYTHING recommeded in the support pages. Reinstall, uninstall, install, reboot I've done it all a hundred times. I have over 5 pages of support documents I printed up and I followed them to the T. I have 10 different USB ports including 3 2.0 USB ports. My windows recognizes the iPod instantly, but the updater will not.
    I 'm starting to think it's a problem with the update software.
    Please, if anybody has any advice other than "www.apple.com/support/ipod" please post something. I have had my Nano since October and never had a problem with it and I really, really miss it right now.
    Thanks
      Windows XP  
      Windows XP  

  • Shuffle On Desktop/Updater doesn't see iPod

    My iPod Shuffle shows up on the desktop. The amber recharge light is blinking. When iTunes opens, I get the following message: "iTunes has detected a software update for the iPod. Would you like to install it now?" When I click "Okay", the updater opens and I get the following message: "An unexpected error occurred". When I click "okay", the updater now tells me to plug in an iPod to update it. My iPod is plugged in and charging, and is on the desktop. When I quit the updater, my iPod does not appear in the iTunes source list.
    I then quit and reopened iTunes. This time when prompted regarding the software update, I click cancel. iTunes now opens with my iPod listed in the Source list. However, when I go to add songs to the iPod I get the following message: "Some of the songs in the iTunes music library were not copied to the iPod because your iPod software is too old. Go to www.apple.com/ipod to get the latest iPod software update."
    I've reinstalled the updater 3 times now. I got the same results as described above each time. The updater doesn't see the iPod. What is the "unexpected error"? Why doesn't the Updater see the iPod?
    Thanks for any help.

    I just downloaded the latest updater version, plugged in my iPod Shuffle, and sat in wide eyed amazement as it actually recognized that the iPod was, in fact, plugged into the computer!!!
    I held my breath while the updater did it's thing... could this actually be it? Could I finally join the army of gleeful millions, listening to my favorite tunes and newscasts while jogging? Would the wonderful little gift I got for Christmas finally - gulp! - work?
    Alas, no. Just as the updater was finishing up I got the following glass if ice water in my face:
    "An error occurred updating or restoring iPod. Disconnect iPod, reconnect and then try restoring again. If that does not work, go to http://www.apple.com/support/ipod"
    I did that, and noticed that "restoring" was not an option, as the "restore" button wasn't active. Ah well... my iPod shuffle goes back into it's neat little packaging, and back onto the shelf while I await the next round of potential solutions to slowly work their way down to the Discussions Sub-basement.
    I swear to God, I will not give up on this. I know it can work. Someday, someday...
    Gee

Maybe you are looking for

  • Utl file - I need to get new line for each value

    I wrote an utl_file package to generate an html file. It is working fine, however, I am having difficulty formating my output. I like to have values returned one line at a time. For instance, Name:Sam Ok area code: 407 phone: 333-4444 picture: displa

  • IWeb Photo Captioning from Aperture Metadata

    I'm not sure if this should be under iWeb or Aperture. I use Aperture 2.1 and iWeb '08 2.0.3. In iWeb I have albums of photos from Aperture. When using the media browser for adding Aperture photos into iWeb, the standard nomenclature is for the iWeb

  • Charts corrupted at runtime

    Hi, I have a dashboard which have charts using dynamic visibility and some combo boxes. When i preview the dashboard and make some selections in combo boxes charts are getting corrupted (there background is not visible, data dont change etc)         

  • Oracle 8.05 client

    I need to download the 8.05 client. I'm downloading the 8.17 client, but it is 208 mb! That seems a little too big to be just a client, and I don't know if the 8.17 will work with my app (Bently Microstation J). Is there a place I can download the 8.

  • Amount is coming  in million or trillion instead of  lakh or crore in scrip

    hi everybody,    i am modifying a standard fi script for payment advice . in that form i  showed  the total amount in words. for that i am using HR_IN_CHG_INR_WRDS function module.  the amount in word is coming as million or trillion , but i need it