Latest update locked my mac
This is going to sound unbelievable, however, after applying the latest update to my mac it acted as if it had been remotely locked from icloud, I even got the email to say I had locked it 8 hours before it actually locked itself. I don't really want to phone apple and be charged a bomb for an issue that I did not cause. Any ideas?
Okay so I got the timing wrong it was locked 58 minutes ago as of writing this message. I'm on GMT time.
Similar Messages
-
I am trying to download adobe reader for my macbook air but it keeps stopping at 44%. I have downloaded the latest updates for my mac and retried numerous times. Please advise. Thank you
As posted about a dozen times every day, try the offline installer from http://get.adobe.com/reader/enterprise/
-
What is the latest update available for Mac OSX 10.5.8 that will allow me to get the latest update for iTunes. I really need to update my iPhone and CAN'T!! GRRRR!!!
Minimally you need Snow Leopard or greater:
Upgrade Paths to Snow Leopard, Lion, and/or Mountain Lion
You can upgrade to Mountain Lion from Lion or directly from Snow Leopard. Mountain Lion can be downloaded from the Mac App Store for $19.99. To access the App Store you must have Snow Leopard 10.6.6 or later installed.
Upgrading to Snow Leopard
You can purchase Snow Leopard through the Apple Store: Mac OS X 10.6 Snow Leopard — Apple Store (U.S.). The price is $19.99 plus tax. You will be sent physical media by mail after placing your order.
After you install Snow Leopard you will have to download and install the Mac OS X 10.6.8 Update Combo v1.1 to update Snow Leopard to 10.6.8 and give you access to the App Store. Access to the App Store enables you to download Mountain Lion if your computer meets the requirements.
Snow Leopard General Requirements
1. Mac computer with an Intel processor
2. 1GB of memory
3. 5GB of available disk space
4. DVD drive for installation
5. Some features require a compatible Internet service provider;
fees may apply.
6. Some features require Apple’s iCloud services; fees and
terms apply.
Upgrading to Lion
If your computer does not meet the requirements to install Mountain Lion, it may still meet the requirements to install Lion.
You can purchase Lion by contacting Customer Service: Contacting Apple for support and service — this includes international calling numbers. The cost is $19.99 (as it was before) plus tax. It's a download. You will get an email containing a redemption code that you then use at the Mac App Store to download Lion. Save a copy of that installer to your Downloads folder because the installer deletes itself at the end of the installation.
Lion System Requirements
1. Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7,
or Xeon processor
2. 2GB of memory
3. OS X v10.6.6 or later (v10.6.8 recommended)
4. 7GB of available space
5. Some features require an Apple ID; terms apply.
Upgrading to Mountain Lion
To upgrade to Mountain Lion you must have Snow Leopard 10.6.8 or Lion installed. Purchase and download Mountain Lion from the App Store. Sign in using your Apple ID. Mountain Lion is $19.99 plus tax. The file is quite large, over 4 GBs, so allow some time to download. It would be preferable to use Ethernet because it is nearly four times faster than wireless.
OS X Mountain Lion — System Requirements
Macs that can be upgraded to OS X Mountain Lion
1. iMac (Mid 2007 or newer) — Model Identifier 7,1 or later
2. MacBook (Late 2008 Aluminum, or Early 2009 or newer) —
Model Identifier 5,1 or later
3. MacBook Pro (Mid/Late 2007 or newer) — Model Identifier 3,1 or later
4. MacBook Air (Late 2008 or newer) — Model Identifier 2,1 or later
5. Mac mini (Early 2009 or newer) — Model Identifier 3,1 or later
6. Mac Pro (Early 2008 or newer) — Model Identifier 3,1 or later
7. Xserve (Early 2009) — Model Identifier 3,1 or later
To find the model identifier open System Profiler in the Utilities folder. It's displayed in the panel on the right.
Are my applications compatible?
See App Compatibility Table — RoaringApps.
For a complete How-To introduction from Apple see Upgrade to OS X Mountain Lion. -
The latest update for my Mac is taking over an hour
I am updating with the latest update and it looks like it is stuck on the last 90%.
Wait overnight. Sometimes network traffic can cause problems.
Turn off Energy Saver.
You may need to download the 10.9.2 combo from here, if it fails:
http://support.apple.com/kb/DL1726
If it fails, but you are able to boot, backup your data if you haven't already.
If it fails, and you can't boot, see this tip on data recovery if you aren't backed up:
https://discussions.apple.com/docs/DOC-1689 -
HT6065 Problems after latest updates for the mac
After the updates my computer keeps freezing the wheel keeps spinning! any sulutions?
When you have the problem, note the exact time: hour, minute, second.
If you have more than one user account, these instructions must be carried out as an administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Each message in the log begins with the date and time when it was entered. Scroll back to the time you noted above. Select the messages entered from then until the end of the episode, or until they start to repeat, whichever comes first. Copy the messages to the Clipboard by pressing the key combination command-C. Paste into a reply to this message (command-V).
The log contains a vast amount of information, almost all of it useless for solving any particular problem. When posting a log extract, be selective. In most cases, a few dozen lines are more than enough. It is never necessary or helpful to post more than about 100 lines. "The more, the better" is not the rule here.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Anonymize before posting. -
Hi, since I installed the latest update on my Mac I have been unable to open the contents of some emails because it is saying that pages does not recognise the font. For example it is saying 'some features aren't supported, the font Calibri isn't available on OS X. It was replaced with TrebuchetMS' This means that I cannot open letters from my daughters school. Is there any way round this other than getting rid of this nightmare MAC and going back to Windows!?
http://www.mozilla.com/en-US/firefox/3.6.13/releasenotes/
Had the same problem; would have been nice if they had told s that we need an intel processor on our older Macs! I am up and running again. -
Whats up with the system lockups just frustrated as to why. I could be checking mail, surfing the web or using PS Elements 9. Makes no difference what I am doing it occationaly locks up and requires a cold boot (windows talk).
I don't think so, Lion with the latest updates is running fine for most of us.
Post the log for your next lockup or the previous one if you can isolate the timeframe.
/Applications/Utilities/Console > system.log -
Hello everybody, Im trying to update my ITunes on my MAC (laptop) to the newer version so I can then be able to update the latest updates for my Iphone-3G. I don’t require a complete reinstall just need to be able to update my itunes.
What I have tried so far is I had my MAC search for update’s and it said that I should update to (ITunes version 10 . 6 . 3 ) So I asked it to do the update but after 2hrs of waiting for it to download/update it then puts up a message saying the following- (In order to continue installation, please close the following application: ITunes).
When I tried to do this another message comes up that says- (The update ITunes can’t be installed. The following install step failed: run preupgrade script for Apple mobile device support. Contact the software manufacturer for assistance.)
I have also tried to run the update while having closed ITunes before I even start the update but the same problem happens after waiting about 2hrs.
Some one that had the same problem said this might be happening in the older operating systems. But that does not make sense because surely Apple want customers who own a MAC and i-phone to still buy from iTunes.
My MAC is about 4-5years old. I have a i-phone.3G,
Can anybody help me please and Thank you?Download iTunes using the tab at the top of this page. Then run the update with iTunes closed.
-
My Ipod shuffle appears in itunes on mac but not on windows 7 even though we have the latest update of itunes. We have also tried the other solutions on the apple support site.
Hi reinkristine86!
I know you’ve said that you have tried other suggestions for troubleshooting this issue, so pardon me if you have already seen this article, but have you tried all of the troubleshooting steps listed in the article below?
iPod not recognized in My Computer and in iTunes for Windows
http://support.apple.com/kb/ts1369
Thanks for coming to the Apple Support Communities!
Cheers,
Braden -
Bridge 5.0.2.4 with camera RAW 8.4.0.199 ON a MAC 10.10.1. Trying to update to camera RAW 8.7 to get my canon 7dMK2 raw files to work. But the updater say I have the latest update! Witch I clearly don't have . And my Photoshop have to different camera RAW plug-ins. The old 8.4 and the new 8.7. But it doesn't work. Have removed and reinstalled several times. What is going on? Why can't I update bridge to the latest version 8.7 or read my raw files from the Canon 7dmk2?
Try this:
http://blogs.adobe.com/crawlspace/2011/03/keeping-photoshop-up-to-date.html#notconnected -
I wonder if somebody can help me. I am not able to use my internet bank anymore, since Java launched their latest update (7.51) a few days ago. Appearently this one is not compatible with my hardware. I am using Mac OSX version 10.6.8, and Java version 17.0, which seems to be the newest one for my op sys. Anybody know how I can solve this? In advance thank you!
Apple support article to enable Java 6.
Java 6 Enable -
When I try to install Lion it tell's me "You can't use this version of the application install mac os x Lion with this version of Mac os X" even though I have the latest update 10.5.8 of Mac os X?
The install icon has this sign on itmoose0422 wrote:
You can't install Lion over Leopard. To install Lion, a requirement is Snow Leopard. So you can either upgrade to Snow Leopard first or you can make a bootable Lion install disc and use that to wipe your hard drive and install a fresh copy of Lion.
So to make a disk would require you to purchase Snow Leopard and upgrade to 10.6.8 so you can use the App Store, unless you have access to another computer to download it from with your Apple ID. Remember it is about a 3.4GB download.
Good Luck -
Getting error 16 in CC2014 Photoshop even after installing and re-installing mac maverick latest update 10.9.5
Check if this helps. http://helpx.adobe.com/x-productkb/policy-pricing/configuration-error-cs5.html
~ Arpit -
After the latest Security Update 2012-001 (Mac OS X 10.6.8) my Adobe Photoshop CS 8, Dreamweaver 8, and InDesign CS programs crash when I try to save a file. HELP!!!
Howdy,
Apparently some are reporting that this causes the older PowerPC (PPC) applications that are supported in 10.6 via 'Rosetta' to crash upon attempting to open/save/print using any dialog box, or fail in other similar ways such as simply not printing or quitting, or freezing/hanging/crashing of the application.
I have read of some companies that have indeed submitted proper bug reports to Apple, but that is not a guarantee of a bug-fix being issued.
You might wish to read:
http://www.macintouch.com/readerreports/snowleopard/index.html#d02feb2012
If you are unsure if you are still using PowerPC apps, if the application is currently running, look under the 'Activity Monitior' (in Applications -> Utilities), or alternatively you could check in the System Profiler, Applications. Check the column "Type".
Here is a fairly simple way you can restore you system and restore you applications functionality again, if you don't have a recent clone or good Time Machine backup that you can restore from. If you do, restore from your backup prior to having installed the Security Update 2012-001.
Time Machine restore: http://support.apple.com/kb/ht1427
If you are restoring a backup made by a Mac to the same Mac
With your backup drive connected, start up your Mac from the Lion recovery partition (Command-R at startup) or Mac OS X v10.6 installation disc. Then use the "Restore From Time Machine Backup" utility. Select the backup prior to your issues, and it will be restored back to the state it was in at that time.
If you can't easily restore from a backup, you can instead do the following:
- You first start by reinstalling your OS X 10.6.x, this will preserve all your user data, your applications, no worries there.
- Then install the Mac OS X 10.6.8 Update Combo v1.1 (links provided below)
- Make sure you're printers are showing up correctly in your system preferences, if not, re-add the printers
- Then finally, run the Apple Software Update (by pulling down the Apple Menu), and install any and all remaining updates, except do not then re-install the Security Update 2012-001. It is possible that you may have to reboot after installing some of the updates, and you may even need to run it a 2nd time to make sure that you've got all updates, except NOT the Security Update 2012-001.
Links for 10.6.8 Update Combo v1.1:
http://support.apple.com/kb/DL1399
or the link to directly download this 1.09GB combo updater:
http://support.apple.com/downloads/DL1399/en_US/MacOSXUpdCombo10.6.8.dmg
Cheers,
Daniel Feldman
=======================
MacMind
Certified Member of the
Apple Consultants Network
Apple Certified (ACHDS)
E-mail: [email protected]
Phone: 1-408-454-6649
URL : www.MacMind.com
======================= -
Mac extremely slow since recently downloading latest "numbers" software update. Also Mac when put to sleep, will now wake up by itself and go back to sleep etc, etc. Please Help!
Macsimple wrote:
Sorry, I am running version 3.2.2. (1878) for Numbers
OS X 10.9.4
OK, thanks. First, open Disk Utility and the Repair Disk Permissions on your internal HD. You can find DU in Applications - Utilitie. After doing so please restart in Safe Mode, this is easily done by holding down the Shift Key on your keyboard when you hear the start up tone, you will see a progress bar appear letting yuo know it's starting in Safe Mode. Then reset the SMC and PRAM, instructions can be found by clicking iMac SMC and PRAM reset. Then retest.
Maybe you are looking for
-
IPhone 4S sound problem please help?!
I have a 4s and updated to ios7 when it came out. Today my phone has no audio apart from ringtone. The volume bar for example is not available in you tube. The buttons when pressed to adjust sound do not show no volume increase or decrease. The speak
-
Is Oracle relase any certification for Primavera Unifier ?
Hello Team, Request you to please provide info of any certification for Primavera Unifier ?? Provide link if any Regards, Ankit
-
I have installed Windows 7 Home Premium along with all the requisite drivers which I had downloaded from the lenovo website. But yet my camera is not functioning. Please help me out. Thank You
-
Why to have Employees as vendors
We have FI and HR imlemented on same system. Now we are going to have Travel management also. We have not created employees as vendors. Could someone please explain why to have employees as vendors. What are the benifits of having employees as vendor
-
How apply De interlace filter fast
I've been setting in and out points in the timeline then going through the menu and manually selecting the de interlace filter to apply it. Is there a quicker way to do this? I thought I read that the filter can be opened in the viewer and then I gue