Latest Update of Itunes will not open on my PC

I have installed the latest update and itunes will not open on my PC.  I have uninstalled and reinstalled with no luck.

Hi there Apple Sean,
You may find the troubleshooting steps in the article below helpful.
iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
http://support.apple.com/kb/ts1717
-Griff W. 

Similar Messages

  • Error code msvcr80 after last update now itunes will not open

    Error code msvcr80 after last update now itunes will not open.  Reinstalled and still does not work

    Click here and follow the instructions. If they don't work, perform a complete reinstallation (Windows XP, Windows Vista and newer).
    (98968)

  • Installed 10.4 update and itunes will not open

    Installed itunes10.4 32 bit version - after successful installation itunes will not open
    any advise?

    Update to my last post.  I have finally "fixed" whatever problem was causing the Apple software products to malfunction on my PC, Windows Vista 32 Bit SP2.  After updating to iTunes 10.4 and Safari 5.1, a series of error messages would appear:1) AppleSyncNotifier.exe 2) iTuneshelper.exe 3) iTunes Failed to properly install - Error 7 (Windows error 126).  I had tried uninstalling and reinstalling iTunes & Safari as well as downdating iTunes to an earlier version, but this had all failed to correct the problem and the error messages still appeared when the programs were suppose to have been removed. 
    I ended up using the Windows Program Manager (in Control Panel) to remove every single Apple product from my PC, including the Apple Installer.  Then I restarted the system.  Taking bits and pieces of advice from this forum, I started the system, went to the Apple website, downloaded and SAVED the newest iTunes version (which includes QuickTime), but did not run the program.  Then I disconnected from the net, turned off all virus and firewall protections, and finally installed the saved iTunes program.  It took an extraordinarily long time to complete the install, but I was able to restore my libraries from my iPod Touch (4th gen) by performing a simple sync.  I reconnected to the net and updated the device software . . . so far, so good [knock on wood], no error messages yet.  I will add each of the removed programs as they are needed in the future so that whatever conflict exists can be fixed - until then, I'm at least happy to have iTunes back!  Hope this is helpful to someone and saves them the 4 hours it took me to get back on track

  • Since updating yesterday iTunes will not open/sync/recongnize my iPhone. No error messages, ive tryed un/re-installing it but the same thing occurs.. Anyone! Please can you Help? Thank-you

    HELP!!  my iTunes will not respond to connection via usb, it does not reconize it or sync it, no purchased,  wont re-charge etc, when it used to work Yesterday
    and i did an update... ive tryed un/re-install and its the same problem... how ever on my other computer its fine...... Please HELP !! Thank-you

    Hey!
      Glad to hear that you and your family made it through relatively unscathed!  I think we all need to take better care of our wonderful planet, because I think we are upsetting Mother Nature! 
      I have the Windows Installer Clean-Up screen up and tried to upload a screen cap for you, but IE immediately shuts down every time I try.  So I'll have to transcribe the screen for you:
      I see the following:
    (All Users)
    (All Users) [1.2.0.10]
      Those are the top two lines.  The following lines after that are programs he has installed on the machine like Acrobat, Adobe, Autodesk Inventor, and such and they all have a name and program number in brackets.
      And I now again have the obligatory Apple programs installed and listed again:
    (All Users) Apple Application Support [1.5.1]
    (All Users) Apple Mobile Device Support [3.4.0.25]
    (All Users) Apple Software Update [2.1.2.120]
    (All Users) Bonjour [2.0.5.0]
      Please note that iTunes is NOT LISTED.
      Everything else 'appears' to be normal, I'd say.
    Take care, and I'll see you on the flipside!  According to my clock, it's 4:11am Thursday morning there!
    See ya!
    - Austin 

  • After latest updates july 2013 will not open cds

    since my recent updates about 3 days ago, the cds I try to load will not read. Even cds that have been previously put onto itunes will not load. MAC mini spits them out.

    Apple Computers: Troubleshooting the slot-loading SuperDrive

  • The latest update for ITunes will not completely update. It tells me to try manually but how do I do that?

    I'm trying to find out why the latest ITunes update will not update completely on my computer. It goes so far and then it stops with an error message saying to try installing it manually. I don't know how to do this. All other updates have been ok. This one is 11.1.
    Thank you for your help.
    Frogladyford

    Download iTunes 11.1.4 from here - http://www.apple.com/itunes/download/
    Hope that helps.

  • After installing new update, my itunes will not open and it says to reinstall it. I did this two or three times and it still won't open. HELP!!!!!!

    After installing the new iTunes update (10.5, if that's the newest update)
    when i try to open iTunes, an error message pops up that says
    iTunes.exe - Entry Point Not Found
    "The procedure entry point
    kCMByteStreamNotification_AvailableLengthChanged could not be
    located in the dynamic link library CoreMedia.dll."
    When I click OK, another message pops up saying
    "iTunes was not installed correctly. Please reinstall iTunes."
    "Error 7 (Windows Error 127)
    I tried reinstalling it several times and the same thing keeps happening.
    WHAT DO I DO?!!!
    Please help!
    Thanks!

    Followed the steps in http://support.apple.com/kb/HT1925?viewlocale=en_US then downloaded and it worked.

  • Latest update of itunes will not install correctly - January 31, 2014

    I just tried to download and install the latest edition (update) of itunes.  I am getting this error message R6034 an application has made an attempt to load the C runtime library incorrectly, please contact the application support team for information. Fixes?

    Click here and follow the instructions. You may need to completely remove and reinstall iTunes and all related components, or run the process multiple times; this won't normally affect its library, but that should be backed up anyway.
    (99283)

  • ITunes will not open on Windows Vista after upgrading to new version

    After installing the latest version, my iTunes will not open. I have uninstall and reinstall two times and still nothing, any suggestions or tips?

    King Penguin set you on the right track. It's probably security software not recognizing the new version of itunes, and blocking it.
    http://support.apple.com/kb/TS3125

  • Did a software update (the latest for iMac) for iTunes and now iTunes will not open

    iTunes will not open after the update completed. I tried to downgrade back to the previous for iTunes but I cannot access my downloads....I seriously need help from someone.....HELP

    The phone is in restore mode and the picture is telling you what to do. Connect the phone, by cable, to iTunes in the computer you normally use for syncing, and retore the phone.

  • Error R6034 during update. iTunes will not open due to error.

    Get Error R6034, Application attmempting to load C runtime library incorrectly.  iTunes will not install ammanulaly and now iTunes will not open due to error.

    Try updating your QuickTime Player to the latest version. Does that clear up the DEP errors in iTunes?

  • My newly updated itunes will not open

    To Whom this may concern,
         I have a 15" mac book pro laptop, running snow leopard operating system. I updated my Itunes account about 2 days ago when my security updated popped up, and now i cannot open my itunes. When I click on the itunes icon to open it, it pops up this box that has no writing, however it has a button to press ok, and my itunes will not open. I have tried restarting my computer, i have tried turning off my computer. Please Help!

    Hello Ms. Dunbar,
    I recommend that we complete uninstall iTunes from your computer, then reinstall the latest version from www.apple.com/itunes
    For steps on uninstalling, please follow this resource:
    iTunes: How to remove and reinstall the Apple Mobile Device Service on Mac OS X 10.6.8 or Earlier
    http://support.apple.com/kb/HT1747
    Thanks,
    Matt M.

  • TS1717 Started a software update this morning which didn't work.  Now Itunes will not open at all.  I get the following message."The program can't state becasue MSVCR80.dll is missing from your computer."

    Started a Itunes software update this morning which didn't work.  Now Itunes will not open at all.  I get the following message."The program can't state becasue MSVCR80.dll is missing from your computer."

    There are a couple of options that I know of to fix the issue.
    One is listed in this thread - https://discussions.apple.com/message/24606478#24606478 - and involves uninstalling iTunes and related components and then re-installing iTunes.  You will need to read the instructions in the thread to see the correct uninstall order.
    Second option is use System Restore to set your system back to a date prior to the iTunes update.  I did this before finding the thread mentioned above.
    Not sure exactly what the problem is but I know, after a search, that MSVCR80.dll was indeed already installed on my computer. 
    Message was edited by: karivers

  • After installing the OS 10.10.3 update iTunes will not open.  Re-downloading iTunes and re-installing did not help.

    After downloading and installing OS 10.10.3 iTunes will not open.  Spotlight does not find it.  I have repaired permissions, re-downloaded iTunes, and re-installed it.  The problem remains.  ITunes appears in the directory of Applications, the update shown in the info in Finder.  Double clicking does not open it.

    kjo04 wrote:
    After installing snow leopard 10.6.8 my mail application will not open. It says you can not use this version of the application Mail with this OS X. You have Mail 3.6. What do I do? I thought everything would just automatically update... am I doing something wrong?
    I suggest visiting the following Apple Support Communities Thread, your problem is similar to the one described there...
    Re: Just installed snow leopard but i can't use mail b/c 3.6 version

  • After an update itunes will not open. there is a missing msvcr80.dll i tried to re install itunes and now it says check system services. I have full admin to pc

    after an update itunes will not open. there is a missing msvcr80.dll i tried to re install itunes and now it says check system services. I have full admin to pc

    turingtest2 post 01/2014: MSVCR80.dll missing, cannot install iTunes - https://discussions.apple.com/message/24618776
    iTunes for Windows: Missing MSVCR80.dll - https://sites.google.com/site/appleclubfhs/support/advice-and-articles/itunes-wi ndows-missing-msvcr80-dll - install as administrator.

Maybe you are looking for

  • FBV0 - Error while posting prked document..

    Hi Team, I am getting the below error while trying to post a Parked Document in FBV0* Field BSEG-SECCO. does not exist in the screen SAPMF05A 0302 Message no. 00349 Diagnosis The specified field does not exist on the screen. Procedure Check your batc

  • Application Folder Cloned

    In a previous question to the community I asked about the cloning of desk top files. No reply. I have now discovered that my entire Applications folder has been cloned along with my Home folder. I believe this was caused by Super Duper the back-up so

  • Problème avec contrôleur MCLM-3003-06-S de chez Faulhaber

    Bonjour, Je suis actuellement en stage en Écosse, je dois faire un programme LabVIEW qui envoie un programme et le lance (pas de soucis) puis qui demande au contrôleur de renvoyer la position et courant du moteur (LM 1247). Il envoie et de départ du

  • Adobe Dreamweaver CS5

    Why is my Internet Security warning me that Adobe Dreamweaver CS5 is trying to act as Internet Server?  Is adobe collecting information about me?  I attach a picture here for you guys to see it first hand: I am posting this picture on Microsoft Serve

  • How to print the call stack of a thread?

    I would like to print out the call stack of a thread, something that looks like the output of pstack. From within the thread itself, I suppose I can fork1() to duplicate the thread and fork another process to run pstack on the duplicated thread. I wo