Latest updates to Apple caused Nano 7th generation to no longer work with vista

Hi, Itunes updates occurring thi summer (2014) seem to have compromised my Nano 6th generation's ability to sync with Vista. It does sync with my Win 7 and Win 8 machines, however. All of the suggestions put forth by Apple to resolve this Nano issue are, sadly, not working. I sincerely believe that this is an Apple/Vista problem, and wonder if there is a patch. I suspect not as Vista is going to be outmoded in early 2015, but if there are suggestions outside of the R's, I'd appreciate some input from the community. The ipod is recognized by the computer, and it is able to 'juice', but the sync feature is not available. Any ideas? Old operating system for me, likely going to be retired - but I'm sure I'm not alone with the nano/itunes 11+ updates. I have options and access to other operating systems, but other folks may not, so if there is any way to address this Itunes/Vista issue, that would be a big help.

Make sure your headset is in pairing mode before attempting to pair again to your nano.

Similar Messages

HT201413 apple ipod nano 7th generation will not sync with itunes

My new apple nano 7th generation ipod does not sync with itunes. can you suggest something other than reinstalling itune?

yes i have a solution to my problem only because of a recent phone call from apple they were great.......... in the right hand side of itunes my i pod was displayed. click on the ipod symbol........at the top of the page you will see summary,,,,,,music,,,,,,movies,,,,,,tvshow,,,,,,photo,,,,,on this ipod.
click on music check mark music done and sync
problem solved
thanks apple

HT1339 my ipod nano 7th generation....works fine as long as it's on the docking station. when off the station, the display goes dark after a few seconds. it's fully charged. please help. this is the heartbeat of my business. thanks

my ipod nano 7th generation....works fine as long as it's on the docking station. when off the station, the display goes dark after a few seconds. it's fully charged. please help. this is the heartbeat of my business. thanks

In the worst case, it's still under warranty (all 7th gen nanos are still under one year from purchase).
So, you disconnect it from power, and it almost immediately goes dead? You can try a Restore... but it doesn't sound like the type of problem a Restore will fix.
You should probably have it looked by Apple Tech Support. If there's an Apple Store nearby, you can take it to the store's Genius Bar. To avoid waiting, you can make a reservation at the store's web page
http://www.apple.com/retail/

Ipod nano 7th generation touch screen doesnt work

Ipod nano 7th gen touch screen wont respond only 6weeks old?

Have you reset it? Hold down the power and home buttons, wait for the Apple logo, let go of the buttons.

My ipod nano 3rd Generation has just stopped working with no warning signs!

It has a black blank screen and is unresponsive to charging when plugged into a USB port and a standard USB mains powered charger that came with my iphone.
I have tried pressing the menu and centre button and nothing happens.
Please help if possible.
Thank you.

How long have you left it to charge? That is a pretty good chance that the battery may just be shot and in need of replacement.
B-rock

IPod nano 4th generation backlight no longer works.

After 2 years of faithful service my iPod nono no longer allows me to view the screen without the help of a bright light pointed at the screen. I tried the 5 'Rs' in the manual, it is fully charged, plays as it always has but without the backlight. Please help.

If the 5 R's didn't address the issue, it's likely hardware related, meaning you'll need to have your iPod serviced in order to gain full functionality of it again.
Otherwise, it's time to start saving for a new iPod.
B-rock

Apple Lightning to SD Card Reader no longer working with iOS 8.0.2

I just tried to copy photos from my wedding to my iPhone 5 and iPad Mini w/Retina(both with iOS8.0.2), and I get the message "This device is not supported". I find this odd, as it is the official Apple branded SD card reader.
Does anyone have any ideas as to why this would all of a sudden not be working? I had no issues prior to updating to 8.0.2.
If it is just this version of iOS, I do hope that it is fixed in 8.1.

The lightning to SD card reader has NEVER been supported on the iPhone only on iPads
Compatibility
Questions about compatibility?
Call
0800 048 0408 or Chat now
iPad models
iPad with Retina displayiPad miniiPad mini with Retina displayiPad Air
To sort the iPad suggest you restore the device especially if you did the update ovrer the air

My iPod Nano 7th generation is not detected in Itunes

Hey there,
I have a iPod Nano 7th generation and I'm working with a Windows 7 64-bit version.
So when I got my iPod, I installed iTunes and everything went very well..
but today I tried to sync my iPod and it is not even detected from my iTunes or my computer.
I had the error -42110, but I found the solution on here, but it didn't work either.
I went through a lot of questions on here, but I couldn't find any solution for my problem
Has anyone got any idea?

well actually I did connect my iPod 3 days later or so to my charger, because a friend of mine asked me if I'm sure that the cable is not broken. So I connected it and it charged, when I thought "Well let's try on the computer again". I plugged it in and it was detected again.. so uhm I don't really know why it did not worked the last times.
So maybe try to restart your computer and turn off an on again the device and try it later on again.. maybe it will work then:)
I'm sorry I can't help more!

Ipod Nano 7th generation not recognized by computer or iTunes

Neither my computer nor ITunes recognizes my Ipod nano 7th generation. It was working fine until I ran an intensive AVG PC tuneup on the laptop. Device manager recognizes the Ipod and says it is working correctly. I have done all suggested troubleshooting and nothing has yet worked. Additional suggestions or info I should provide?

diagnostic shows....
**** Device Connectivity Tests ****
iPodService 11.3.1.2 (x64) is currently running.
iTunesHelper 11.3.1.2 is currently running.
Apple Mobile Device service 3.3.0.0 is currently running.
Universal Serial Bus Controllers:
Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27C8. Device is working properly.
Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27C9. Device is working properly.
Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27CA. Device is working properly.
Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27CB. Device is working properly.
Intel(R) 82801G (ICH7 Family) USB2 Enhanced Host Controller - 27CC. Device is working properly.
No FireWire (IEEE 1394) Host Controller found.
Most Recent Devices Not Currently Connected:
iPod nano (4th Generation) running firmware version 1.0.4
Serial Number: Y(I removed info)
**** Device Sync Tests ****
No iPod, iPhone, or iPad found.
it looks like everything is fine, except it can't find the ipod... why?
when I plug in a thumb drive, it recognizes that, why not the ipod?

HT3176 Apple TV sleep mode remote shortcut no longer works? with new software update. Why? Is there an alternative other than nav to settings menu?

Apple TV sleep mode remote shortcut no longer works with newest software update. Why? Is there an alternative other than nav to settings menu? Reset remote shortcut dead as well. :(

Hold Menu + Play/Pause to reboot the box from the main menu.

Iphone 2.0 update no longer working with Chrysler Uconnect Hands Free

Hello. I recently downloaded the 2.0 update for my original iphone and it will no longer work with the my Uconnect hands free setup in my 2008 Dodge Ram. I am a Chrysler Dealer Parts Manager and have installed and shown many people how to set these uconnect hands free devices up but I have no connection with the 2.0 update. I pair the phone as a new phone and it will pair but will not show up at all and it says "No Phone". Anybody know a fix for this. Help Apple!!!

I have a new Dodge Nitro. U Connect and iphone were working great. I had no problems until the 2.0 update. I tried calling apple care but gave up quickly when I realized I was going to be waiting forever with everything else they have going on.
The weird thing was that I was on a call trying to get some help from a friend of mine and all of a sudden the phone started working with the u connect. Then after leaving and returning to the car it stopped working again. Haven't been able to get it working since. I though maybe you had to be on a call for a while before it would transfer over. That wasn't it.
I tried turning off wireless too. Again no effect.
The phone shows that it is paired with the u connect. I've tried unpairing and repairing several times still to no effect. They just aren't working. This is a HUGE problem. I love my iPhone but may have to give it up and switch if they don't come up with a fix in the next month or so.
Anybody who can help me solve this would definitely move to the top of my Christmas Card List!

I have an ipod nano 7th generation and can not get it recognised by my Windows 8.1 laptop (it appears briefly on My computer, then disappears). This happened after I updated iTunes to the latest version. Does that have something to do with it?

I have an ipod nano 7th generation and can not get it recognised by my Windows 8.1 laptop (it appears briefly on My computer, then disappears). This happened after I updated iTunes to the latest version. Does that have something to do with it?

Hello there, kiwilucea.
The following Knowledge Base article offers up some in-depth steps for troubleshooting your issue:
iPod not recognized in My Computer and in iTunes for Windows
http://support.apple.com/kb/ts1369
Keep in mind if you get to Step 12 Reinstall iTunes, those steps need to be followed exactly as outlined for the reinstall to be effective.
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

Ipod Nano 7th generation touch interface is now screwed with due to apple update.

Hi, I recently purchased a new laptop switching over from a macbook pro 2010 of which the logicboard died. In this newly configured windows 7 64 bit laptop I downloaded the latest itunes. I then connected my ipod nano 7th generation to it and it requested to format it since it was formatted for a mac. I did so and restored my ipod nano 7th generation. After this however my previously perfectly working nano touch interface (swiping, touch to select) is now completely messed up. This has to be due to the formatting and/or the new nano update or itunes update from apple. I can't even swipe to the right or left to move between screen interfaces on my nano anymore. As well the touch icons require double taps and have rectangular white selection boxes over each icon (NOT NORMAL)
Overall I am very displeased and want apple to fix this with either a new firmware nano 7th generation update or apple itunes update for windows 7 64bit. I'm thinking of buying a replacement iphone 4 but now that this issue is prevalent how can I TRUST Apple that nothing wrong will occur with connecting a new iphone 4 to my itunes on a windows 7 64 bit PC.
I am NOT the only one with this issue as you can check out for yourself: http://answers.yahoo.com/question/index?qid=20130727205241AAOmiuC
REASON FOR POSTING THIS HERE: I want more exposure to this issue. I couldn't get access to customer support since my ipod nano 7th generation is over a year old. This is cruel but whatever, Apple does what it wants and I will post this here to do what I want. Gain exposure to this defect that clearly Apple is not addressing since the above link displays a user with the same issue and posted the problem 3 months ago.
DO SOMETHING ABOUT THIS APPLE

Hi ImAMinion.
Very good question. I should have explained that part. VoiceOver changes how the navigation functions so it's a little tricky.
From the home screen I got to settings by swiping up and down instead of the normal left and right.
To open settings I first tapped once on the settings icon so that the box appeared around the icon. Then I double tapped the icon to open it.
I repeated the "tap once to get the box then double tap to open" process to navigate through the settings menu. Navigate to: Settings -> General -> Accessibility -> VoiceOver -> set to off. Once it's off the navigation will return to normal.
Hope that helps.

My new ipod nano 7th generation will not sync with i tunes, followed all the apple on line trouble shooting ideas, this device will not show up in itunes but i can see it from explorer, windows 7 user.

ipod nano 7th generation will not sysc with i tunes is updated , device does not show up in itunes under devices but shows itself in explorer.ran diagnostics failed sync. about ready to take this back to best buy.

yes i have a solution to my problem only because of a recent phone call from apple they were great.......... in the right hand side of itunes my i pod was displayed. click on the ipod symbol........at the top of the page you will see summary,,,,,,music,,,,,,movies,,,,,,tvshow,,,,,,photo,,,,,on this ipod.
click on music check mark music done and sync
problem solved
thanks apple

I just recently updated my iPod Nano 7th Generation, and, after the upgrade finished, my iTunes library, playlists and all, vanished. How can I restore the playlists and songs to iTunes?

I updated my iPod Nano 7th Generation, and it wiped my iTunes library. I no longer have my playlists or movies. I was able to recover my music, but the many, many playlists I had, I could not recover. Is there any way I could recover them?

Hello apbvieira,
It sounds like your iPod Nano is not recognized in iTunes anymore after a recent update. I recommend the following article to help you get that in order named:
iPod not recognized in My Computer and in iTunes for Windows
http://support.apple.com/kb/ts1369
1. Start with the iPod Troubleshooting Assistant
If you haven't already done so, use the iPod Troubleshooting Assistant that applies to your iPod. This will often solve your issue.
If you're still experiencing the issue after going through each of the steps in the assistant, continue with the steps below in this article. The most likely solutions are listed below (for both USB and FireWire (IEEE 1394) iPod connections). Check each section starting from the top of the list to see if that is what's keeping your iPod from appearing.
Note: To determine if your iPod syncs via USB or FireWire, check the table in the Additional Information section below.
This step will get you started, but there are additional steps in the article if you need them.
Thank you for using Apple Support Communities.
Regards,
Sterling

Latest updates to Apple caused Nano 7th generation to no longer work with vista

Similar Messages

Maybe you are looking for