Latest upgrade for fb failed

I have a bb curve 8520 last week I had an upgrade to facebook available to download which I did. It went through all the motions ok and then at the end it came up with the usuall t/c's to confirm so i clicked on " I agree" and thats where it has stuck ? So now I have no fb on my phone . Can someone please tell me how to take fb off so I can have a go at re-installing again. Thank you inadvance for any help. ( I went to a o2 store yesterday and their guru told me he didnt know how to do it either...some guru !!)

Hello bluepop
Welcome to BlackBerry Support Community Forums
If your previous Installation of FaceBook for BlackBerry failed , then first Uninstall facebook from your device. KB10040 : How to view or remove installed application on a blackberry smartphone .Once deleted perform a battery pull restart.Then from your BlackBerry Browser type or click www.blackberry.com/facebook and download it again .So try it and let us know.
Prince
Click " Like " if you want to Thank someone.
If Problem Resolves mark the post(s) as " Solution ", so that other can make use of it.
Click " Like " if you want to Thank someone.
If Problem Resolves mark the post(s) as " Solution ", so that other can make use of it.

Similar Messages

Just installed the latest upgrade for iTunes. Cannot open iTunes store?

Just installed the latest upgrade for iTunes. Cannot open iTunes store?

Hey there Ray Neilson,
It sounds like you are able to open iTunes but cannot access the store. I recommend the troubleshooting from the article named:
Can't connect to the iTunes Store
http://support.apple.com/kb/ts1368
Troubleshoot issues in Windows
If you haven't been able to connect to the iTunes Store for more than a day (and other customers on our discussion boards aren't experiencing similar issues) a software or Internet service provider (ISP) configuration issue may be blocking your access to the iTunes Store. Find out which ports and servers need to be allowed for iTunes Store access.
Update iTunes to the latest version.
If iTunes Store appears empty and only displays the message iTunes Store, follow these steps.
Try the steps to troubleshoot iTunes Store connectivity in Windows.
As with all firewalls not manufactured by Apple, you may need to configure Windows Firewall to allow iTunes to access the iTunes Store. Follow these steps for Windows XP, Windows Vista, and Windows 7.
Try disabling any proxies built-in to Windows. You should avoid proxies because they can cause issues.
If you're receiving a specific error message, follow these steps.
If the issue still persists, contact your Internet service provider and confirm that these ports and servers are enabled over your network.
Note: The hosts file may be blocking the iTunes Store.Microsoft's article How do I reset the hosts file back to the default? has instructions and a FixIt to have Windows try to reset the hosts defaults for you.Note: Some workplaces may put internal resources in the hosts file and may block iTunes Store. The FixIt doesn't work for Windows 8.To create a copy of your hosts file and replace it with an empty hosts file, follow the instructions below:
You can find the hosts file at: C:\WINDOWS\SYSTEM32\DRIVERS\ETC.
Select the hosts file. There should now be a duplicate of the hosts file named "Copy of hosts" (Windows XP) or "hosts-copy" (Windows Vista, Windows 7, or Windows 8).
Drag the original hosts file to your desktop.
Right-click the duplicate file and choose Open. You may be prompted to choose the program you want to use to open this file. Double-click Notepad.
When Notepad opens, choose Edit > Select All.
Choose Edit > Delete.
Choose File > Save.
Close Notepad.
Right-click the duplicate file, and choose Rename.
Type "hosts" (without quotation marks) and press Enter.
Restart your computer and try connecting to the iTunes Store.
If you still can't connect to the iTunes Store, your security software or firewall may be blocking the ability of iTunes to communicate with the Internet. Learn how to resolve security software issues.
If the issue persists, try the troubleshooting in this article:
iTunes: Advanced iTunes Store troubleshooting
http://support.apple.com/kb/TS3297
Thank you for using Apple Support Communities.
All the very best,
Sterling

In the latest upgrade for iMovie 11' there is no "export to QuickTime" or other way to set your preferred export settings? can anyone explain how to do this now?

In the latest upgrade for iMovie 10' there is no "export to QuickTime" or other way to set your preferred export settings? can anyone explain how to do this now?

Export to Quicktime file in imoie 10 is explained here:
http://help.apple.com/imovie/mac/10.0/#move6e0cb2ad
Geoff.

Where can I find the latest upgrades for Crystal Reports 2008

Hello all
My question is rather simple, I need to know. Where can I find the latest upgrades for:
1) Crystal Reports 2008 Merge Modules
2) Crystal Reports 2008 Runtimes.
Are they incremental upgrades ????
Thanks in advance..
ADrián.-

Downloads page is here:
http://service.sap.com/sap/bc/bsp/spn/bobj_download/main.htm
[This|https://wiki.sdn.sap.com/wiki/display/BOBJ/CrystalReports2008-VersionandDownloadinformationforSPsand+FPs] wiki tracks latest SPs and FPs with download links.
[This|https://wiki.sdn.sap.com/wiki/pages/viewpage.action?pageId=56787567] wiki has links to runtime (I believe I have not updated this for FP 2.5 yet, but the downloads page has these)
And yes, they are incremental.
Ludek
Follow us on Twitter http://twitter.com/SAPCRNetSup

Downloading the latest upgrades for Mac 10.8.2 keeps stalling. I still have Firefox 17.0.1 - has been many tries but process just hangs.

Downloading the latest upgrades for Mac 10.8.2 keeps stalling. I still have Firefox 17.0.1. the system has tried many times but the process just hangs.

Try to create a new profile as a test to check if your current profile is causing the problems.
See "Creating a profile":
*https://support.mozilla.org/kb/profile-manager-create-and-remove-firefox-profiles
*http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Profile_issues
If the new profile works then you can transfer some files from an existing profile to the new profile, but be careful not to copy corrupted files.
*http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

Trying to download the latest upgrade for Lightroom but the download will not accept my password. The password works on the Adobe site when I log in. What am I doing wrong?

I am trying to install the latest upgrade for Adobe Photoshop Lightroom 5.pkg but the program will not accept my password, which works when I log into Adobe. What am I doing wrong?

G¹Day Ned, Thank you very much. That worked. I like simple solutions. Thank
you, again, for taking the time to respond. Steve

VolumeMediaFormat upgrade for volume failed. Status 20888

Hello All;
I have 2 x OES 11 SP2 with NCS servers with the latest updates. These servers are virtuialized on a SLES 11 SP3 with KVM
Following the Docs on putting DHCP on a NCS with NSS volumes
https://www.novell.com/documentation...a/bbe81cc.html
Installing and Configuring a Cluster 8.3.3
Step 9
9. To hardlink, enable the shared volume on which the dhcpd.conf and dhcpd.leases files are hosted eg.DHCPVOL.
Invoke nsscon in the linux terminal and execute the following commands:
/ZLSSUpgradeCurrentVolumeMediaFormat=VolName
/hardlinks=VolName
in doing the first command, I receive
nss /ZLSSUpgradeCurrentVolumeMediaFormat=VOL1
VolumeMediaFormat upgrade for volume "VOL1" failed. Status = 20888.
The second command states the first command must be done.
nss /hardlinks=Vol1
Hardlinks may not be created on volume "vol1" until it is upgraded using the "ZLSSUpgradeCurrentVolumeMediaFormat" command...
I can offline, online, migrate the pool (with a single volume) between the 2 servers with no issues.
I have checked the nss and ncs modules on the 2 SLES 11 SP3 servers and they are exactly the same.
using nsscon, I can see the _ADMIN and VOL1 volumes. The _ADMIN has the hardlink attribute. So why does VOl1 not upgrade the media format? And what must be done to make this command work?
I cannot continue until this step is fully completed.
Thank you.

>>> So why does VOl1 not upgrade the media format?
Because we believe there is still a node is not fully upgraded to OES11 SP2. Volume upgrade cannot proceed until all nodes are capable of understanding the new media format.
>>> And what must be done to make this command work?
1. Run "sbdutil -v" on one node to check SBD signatures of all nodes.
The signature for all slots should be
"SBD*"
If some of them have "SBD+" (or other signatures), that's the cause of the problem.
2. Make sure those nodes are really on OES11 SP2, or no longer a participant of the cluster.
3. Run command "sbdutil -i" on one of the nodes to update all signatures.
You can do all of the above while NCS is running. You can now try to upgrade the volume without restarting anything.
Best regards,
Changju

On latest upgrade iTunes store fail to open

After upgrading latest upgrade all fine other than unable to access store.

The problems appears to be related to upgrading your iTunes to 10.4.1 in Windows 7 (in my case). You need to do a full uninstall and then reinstall iTunes. You need to uninstall all 6 iTunes related components and in the right order. See this link for more assistance...
http://support.apple.com/kb/HT1923?viewlocale=en_US

HT4061 uploaded latest upgrade for I phone 5 and I am unable to access my phone ás upgrade hás changed password after trying to access phone with original password numerous time it hás disabled my phone

After upgrading my phone with the latest upgrade, i have entered my old pasword and my phone doesnt recognise it. I have tred numerous times and bêen denied access. My phone hás beên díabled. After re-booting it I get 1 shot then it disables it again. what can i do now???

AllanQuatermain wrote:
Just for the record, and I dont think its going off-topic on this thread, McAfee seems ok on my newish laptop on Windows 7 ATM.
The desktop, and older PC running XP seems to have a new lease of life after installing MSE. Faster boot up; much less resources in use etc, all the points that Potters and others have mentioned on the forum about MSE. Running Malware, Super Anti Spyware in conjunction with it.
Exactly my experience. I've said before that McAfee was tolerable on my reasonably powerful laptop, but it absolutely throttled the (upgraded) netbook rendering it unusable for up to 10 mins after boot and when it scanned. I was so impressed with the change that MSE brought to the netbook that I went for it on both computers and have not regretted it for a moment.
You can click the white star next to this message if you think it was helpful.

Cannot get latest upgrade for i pod touch

Hi, I am trying to update my I Pod to the latest software but cannot get past 4.2.1 . Some of the apps I want to install say I need 4.3 but it seems it is not available for my I pod.
Any info would be appreciated.
Kind Regards.

You may already have the latest update for your iPod Touch, but check here to be sure:
iOS 4: Updating your device to iOS 5 or later
Here are the last OS versions for each iPod generation:
An original iPod Touch can run iPhone OS 3.1.3
2G model: maximum iOS 4.2.1
3G model: maximum iOS 5.1.1
4G, 5G can run iOS 6.
To determine which of these you have click here: Identifying iPod models

Has anyone had any problems with the latest upgrade for iPad?

I have an iPad 1 and am being prompted to upgrade to the latest version software. Has anyone had any problems when doing this? Our PC runs on Wndows 7.
Having just resolved iTunes not connecting to the store after the recent upgrade, I'm reluctant to do something that could potentially screw up the iPad which does what we want as it is.

bobtheblob wrote:
Ok, thanks for that. I'll hang fire for the moment & see if anyone else has any comments.
That's probably a good idea. If you are happy with the system as is, I'd wait to upgrade. I can report that my friends and family have mostly upgraded to iOS 5 without any problems, but as you can probably tell from other posts on this board, lots of people have run into problems.
As the old saying goes, if it ain't broke, don't fix it!

Latest upgrade for the ACS.

Hi
I have a ACS 1113, it is running the following software:
Cisco Secure ACS: 4.0.1.44
Applicance Management Software: 4.0.1.44
Applicance Base Image: 4.0.1.2
CSA Build 4.0.1.543.2: (Patch: 4_0_1_543)
What I was wondering what is the latest version/patch.
I have had a look and I am unsure of what is required for the upgrade.
Any help much appreciated.
Regards MJ

General version is 4.1
http://www.cisco.com/en/US/products/sw/secursw/ps2086/prod_software_versions_comparison.html
Latest available patch is Acs-4.1.1.23.4
Check available ACS downloads
http://www.cisco.com/cgi-bin/tablebuild.pl/acs-win-3des?sort=date
M.

Error when trying to upload latest upgrade for iPod Touch

*when i try to upgrade to 4.0.2 it say error (-5000) and says if i continue i will lose all my data. what do i do?*

under the 'advanced' drop down menu, i select 'convert selection for iPod'

Firmware upgrade for keyboard failed now keys won't work

Hi
Hope someone can help, I recently upgraded my sisters intel imac and during the aluminium (USB) keyboard firmware upgrade it failed and now computer doesn't recognise keyboard keys but usb hub on keyboard that mouse is plugged into works fine. Another keyboard works fine which was handy when trying to type in the passwords to try to re update.
I have tried the following
1) searched discussions found advice on resetting nvram, and in open firmware (which on further research doesn't seem possible on this imac?) did control, option P R on start up.
3) EFI firmware upgrade was successful
4) have used disk utility to repair permissions
5) Looked in system profiler and keyboard usb hub is recognised but no keyboard. When another keyboard attached it recognises this fine and is in the system profiler
6) checked all usb ports
Main question - can I fix or do I have to get a new keyboard or perhaps it would be less stress, time wasted etc to just buy a new keyboard???
thanks
G

Hi, if the K/B is under warranty Apple will replace it FOC..Call Apple Help or ->
call in at the local Apple Store or Apple Approved Service Agent.

Latest upgrade for LV 6i

I have procured LV 6i some years ago. I have upgraded to LV 6.0.2 for base package & application builder by downloads from your site. Recenty I noticed LV 6.0.3 mentioned somewhere on your website.
What is the last upgrade download for LV 6i base package + app Builder?
if there is a download for LV 6.0.>>>>3<<<< please inform me where I can download it from.
Also, I am unable to open the following example vi's & can not locate them on your website, could you please email them to me.
"Simple Test Report" or "sample Test Report" or "withHTML.llb"
& "Example HTML Report"
if the files are part of a library, pl send the the entire llb.
Thanks
Shaps

6.0.2 is the only update you need to worry about, unless you are using LabVIEW Real-Time. The 6.0.3 update is only for LabVIEW Real-Time.
-Jim

Latest upgrade for fb failed

Similar Messages

Maybe you are looking for