Latest version of Firefox (version 32) can't access web sites. Using Windows 8.1 Compatibility problems?
Firefox automatically updates to the latest version which is now version 32. I get the following error message: "Firefox can't find the server at us.data.toolbar.yahoo.com" Preceded by "Sever Not Found" This happens on any web site I try to access. Reloading version 31 Firefox works fine, but then it will update itself again.
Windows 8.1 is my operating system.
The latest Release is Firefox '''31.0''' as the only way you would get updated to the current Beta build which is Firefox 32.0'''b2''' (b2 = Beta 2 as there can be say six to twelve Betas) build is if you were on the Beta channel due to having installed a Beta build and continued using it since. If the Firefox 31.0 you installed is updating to 32.0b2 then the 31.0 you installed was a Beta build (make sure the file name did not have say 31.0'''b'''# as there were nine Betas) and not the Firefox '''31.0''' Release say from mozilla.org or https://www.mozilla.org/en-US/firefox/all/
The typical reason for a new version (on Windows) not being able to connect after a new major version Firefox update or install is usually due to a software Firewall blocking the new .exe yet it may stll have the previous version allowed.
*https://support.mozilla.org/en-US/kb/firefox-cant-load-websites-other-browsers-can
*https://support.mozilla.org/en-US/kb/configure-firewalls-so-firefox-can-access-internet
Similar Messages
-
Safari Mac can't access web site that Windows can
None of my Macs can access the site http://cards.123greetings.com . I get Can't Find Server messages in both Safari and Firefox. (Clearing caches doesn't help)
cards.123greetings.com is part of a large free card site that did a major upgrade in October. It still renders correctly on a PC running Windows XP Home which runs on the same network as the Macs, so it's not an isp problem.
Since both Macs (G4 iBook running 10.3, MacBook running 10.4) have the same Can't Find Server problem with both Safari and Firefox, it appears that some setting in the Macs themselves is causing this.
Any help or insight would really be appreciated - Thanks!A big Thank You to Mulder for letting me know that you can access the site (with Mac Safari I presume) - That's good news.
The bad news: I still can't access the site.
The problem affects two separate computers and four browers. Taking your advice, I repaired permissions and logged in as a new account on both machines. Unfortunately that didn't work.
I next tried accessing the site on the MacBook through Parallels running Windows XP Home. The site came up fine using Internet Explorer.
Then I realized that Parallels operates with a different ip address. So I went back on the Mac using a proxy, and the site came right up.
It now seems that the ip addresses of both computers are being blocked at some level. I want to thank Mulder for replying and virtually ruling out that it might be a Safari issue. I'm now "off topic" and will no longer post in this section. But I'm also over my head... If anyone has advice about how to proceed now, I'd truly appreciate it.
Thanks! -
How can i access web sites configured for internet explorer?
I try to access web sites thatwork with internet explorer from my mac and cannot load the home page. How can i access these pages?
Not sure if you're using a different browser than Safari. If not try Firefox or Chrome.
-
How can I see Web sites using Adobe Flash Player with my IPad?
I've realised that it's not possible to visit web sites using Adobe Flash Player.
Is There a program by which Apple allows you to solve this problem?Not from Apple, no, and probably never will be. You can try one of the third-party app/service combinations for playing Flash such as Skyfire , Puffin, or iSwifter. One of those might work for you, though they all have limitations and do not work with all Flash-based sites and services. You may find other suggestions for apps in the many other threads on Flash in this forum.
Regards. -
I am trying to access a web site that I normally have no problems accessing. Now Safari tells me:
Safari can't find the server
Safari can’t open the page “http://www.xxxx.edu/” because Safari can’t find the server “www.xxxx.edu”.
We are using an apple time capsule and no device on the wireless network can open the above web site. We asked a friend to log on and they had no problem accessing the web site.Hi,
Check Network pane in System Preferences. Select the Proxies tab.
If there are any boxes selected on the left, deselect then quit Safari. (Command + Q)
You can also access that information from System Preferences - Advanced. Click the *Change Settings* button.
Relaunch Safari.
Carolyn -
IPhone user, Can Not Access iTunes Store, Using Windows 7
Dear Sir
I used to access the iTune Store from my computer everyday. But since a couple of weeks I started receiving the following (Connecting to the iTune Store) message after clicking on the Store link in iTunes.
http://i50.tinypic.com/1glc8.jpg
It just stays there loading forever.
But I can access the store normally using my iPhone and using other laptops over the same network.
What can the reason be? I am using the latest versions of iTunes and iPhone on Windows 7.
I have tried the iTunes built-in connectivity test and it passed all the tests, I have tried re-installing iTunes, And I have also checked support article (TS1470) and I already have the mentioned options enabled.
Thanks.With that one, try launching iTunes. Go "Edit > Preferences" and select the "Parental control" tab.
Is "Disable iTunes Store" checked? If so, try unchecking that and clicking OK.
Can you get through to the Store now? -
Can't access Web Site, super slowly and time out!
Hi all,
I am using Server 2012 R2 with Hyper-V, HP DL360 G6 Server
The Master OS have a NIC1 to VLAN1 Switch (Also in the Cisco SG300 Switch)
Plus other NIC2 connect to Cisco SG300 28 Switch (Running in L3 Mode), this Cisco then connect to a SonicWALL NSA 2400.
I build some VLAN31 on SonicWALL NSA 2400, and add this to the Cisco SG300 as Truck Port connect Both...
Other Port on the SG300 are untouch, so mean default running mode is Truck mode, and one of it port connect to the NIC2 to the Server ...
Ok, if Hyper-V VM, not enable VLAN in the Hyper-V Management in 2012 R2, it can take the DHCP from the SonicWALL NSA 2400 no problems, can see other LAN (VLAN1) machine well both direction, and go to Internet too.
But, if I setting the VLAN31 on Hyper Manager to some VM, it can take the DHCP and take the IP from SonicWALL for this VALN31, include DNS, GW etc...
But ... it just can ping internet, for example, ping www.yahoo.com it ok, but open IE, enter www.yahoo.com will super super slowly and time out, if running CentOS 6.5 Linux, enter yum update, it total not work, time out, 0.2kb/s etc. But it can ping to www.yahoo.com
no problems...
And If Windows run routert www.yahoo.com, over 10s to see next hub ...
I am double checked SonicWALL NSA2400 Firewall Policy is allow all VLAN and LAN to WAN, and VLAN TO VLAN too..
What is wrong on the Hyper-V VLAN? Do I am setting wrong of my switch port mode (Access/Trunking)?
I am now out of direction what is go on to troubleshooting this.
Thank you.Microsoft Windows [Version 6.3.9600]
(c) 2013 Microsoft Corporation. All rights reserved.
C:\Users\Administrator>ipconfig /all
Windows IP Configuration
Host Name . . . . . . . . . . . . : JimmyChan-G6-01
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No
Ethernet adapter Ethernet 5:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Intel(R) PRO/1000 PT Dual Port Network Co
nnection #2
Physical Address. . . . . . . . . : 00-1B-78-5A-B2-81
DHCP Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
Ethernet adapter Ethernet 4:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : HP NC382T PCIe DP Multifunction Gigabit S
erver Adapter #52
Physical Address. . . . . . . . . : 00-26-55-23-1F-E2
DHCP Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
Ethernet adapter Ethernet 3:
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : HP NC382i DP Multifunction Gigabit Server
Adapter #49
Physical Address. . . . . . . . . : 00-26-55-1A-26-F8
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
Link-local IPv6 Address . . . . . : fe80::1de6:509d:b011:775a%14(Preferred)
IPv4 Address. . . . . . . . . . . : 192.168.218.157(Preferred)
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . : 192.168.218.1
DHCPv6 IAID . . . . . . . . . . . : 436217429
DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-19-D3-8A-8D-00-26-55-23-1F-E0
DNS Servers . . . . . . . . . . . : 8.8.8.8
NetBIOS over Tcpip. . . . . . . . : Enabled
Ethernet adapter Ethernet 2:
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Intel(R) PRO/1000 PT Dual Port Network Co
nnection
Physical Address. . . . . . . . . : 00-1B-78-5A-B2-80
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
Link-local IPv6 Address . . . . . : fe80::acb8:319f:2c75:f829%13(Preferred)
IPv4 Address. . . . . . . . . . . : 192.168.101.11(Preferred)
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . :
DHCPv6 IAID . . . . . . . . . . . : 218110840
DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-19-D3-8A-8D-00-26-55-23-1F-E0
DNS Servers . . . . . . . . . . . : fec0:0:0:ffff::1%1
fec0:0:0:ffff::2%1
fec0:0:0:ffff::3%1
NetBIOS over Tcpip. . . . . . . . : Enabled
Ethernet adapter Ethernet:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : HP NC382T PCIe DP Multifunction Gigabit S
erver Adapter #51
Physical Address. . . . . . . . . : 00-26-55-23-1F-E0
DHCP Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
Tunnel adapter isatap.{A9915F4B-84C6-4168-8E25-909FD2105BD9}:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Microsoft ISATAP Adapter
Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
Tunnel adapter isatap.{E893BCF0-EA57-4E6D-8406-1B6ECF27A1C1}:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Microsoft ISATAP Adapter #2
Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
C:\Users\Administrator>
Above is the Server 2012 R2 Master Host (Mother)
But ... actually still have one Ethernet 6 NIC Card there, it also NC382i, buildin HP DL360 G6 NIC... This card is connect to the Cisco SG300 28 Switch and the Server, and make this card as for Hyper-V Switch (Extenal) ...
I don't why run ipconfig /all not see this card above ..
If you need Screen Capture, let me know ...
THX -
Can't access several sites from Windows XP. What should I do?
Can't access Wikipedia and other sites. Mostly when I click on links from facebook and twitter. And can't access wiki at all. Tried restarting the pc, uninstalling and reinstalling, resetting firefox. Nothing works.
Hi ifaz29,
It looks like the troubleshooting information provided was from the device you reported the issue. Can you please copy the troubleshooting information on the about:support page of the affected installation. This will tell if there are any add ons that might be affecting your browsing. However to skip this step you may also be able to try to start Firefox in Safe Mode to make sure that it is not an add on affecting what sites are displayed. [[Troubleshoot Firefox issues using Safe Mode]]
In order to make sure that it is not the cache you can bypass the cache when you reload the page with these instructions: Reload the webpage while bypassing the cache using '''one''' of the following steps:
*Hold down the ''Shift'' key and click the ''Reload'' button with a left click.
OR
*Press ''Ctrl'' + ''F5'' or ''Ctrl'' + ''Shift'' + ''R'' (Windows and Linux)
*Press ''Command'' + ''Shift'' + ''R'' (Mac)
Let us know if this solves the issues you are having. -
e-mail program used is windows outlook web
Firefox 4 works with the Outlook Web App generated by Exchange Server 2010. At least in my limited testing; I use my phone more than OWA.
Do you know which version of Exchange Server you're accessing? -
Intermittent can not access web sites.
I have a HughsNet satelight dish/ HughsNet modem. I have a
WRT 160N v3 rounter that routes two computers (mine and my wife's) that are
connected to the router with Cat 5 cables. Each computer has a printer attached to
the local computer only (no sharing). We have had several power outages.
We have been having increasing problems with connecting to websites and
connecting to AOL. We have these problems with both AOL and Google Chrome.
The error messages are: "The web address could not be found", and onece I got:
"More than one device is performing address translation (NAT)". Also, some
downloads fail.
What I have already tried: I opened a utility (trouble shooter?) where you type in the
name of the website and it shows the numerical translation...it was working without
error.
These problems occur on both computers and it does not matter if only one is being used and
the other is sleeping/shut off.
I flushed the DNS cache on both PCs:
(Open up a command prompt (Start > Run > cmd.exe > OK).
Type in the command ipconfig /flushdns)
I made sure that my router's firmware was the latetest available.
I changed the router to distribute Goggle's DNS (8.8.8.8, 8.8.4.4.) instead of the default
I.S.P's.
I opened my Local Host file and checked to make sure that there was not any ip
addresses listed that were not commented out (#).
However, when I went to my wife's comptuer to do the same thing, C:\Windows
\System32\dirivers\etc, there was NO host fire or any other file in the etc folder. Do
not know why, I never deleted it and my wife would not know how to delete it.
When I typed the the ip address for the router on my wifes compter (mine was o.k.),
instead of a blank user name and "admin" as the password, both fields were
blank...keeping me from access it. I tried entering admin as the password and
leaving the username blank, but it told me I had not entered the correct password.
I have disabled my Firewall, no change.
I have run Malwarebytes, and have reset (little red button on the back), the router all
to no avail.
What to do? Any help, ideas please.
Note: I am a rank amature. If you give me an abstract of a possible solution (like: set
your router to bridge mode, I will not be able to do it. Please give any possible
solutions in the "just like I am six years old", format: First type in XXXX then select
XXX, then go to XXXXX etc. An abstract answer will only make sense to other
experts (which I am not), and frustrate me.
Thanks for any help.In this example, they show you how to change the local IP address to 192.168.2.1. But use 192.168.4.1 to be safe. Don't worry that it says DSL. It's the same principal.
http://kb.linksys.com/Linksys/ukp.aspx?pid=80&vw=1&articleid=3687 -
Error Message
"Script: chrome://tavgp/content/libs/include.js:595"
Choice of "Continue" or "Stop script"
When choosing "continue" firefox launches but after a while crashes. Using Windows 7That is a problem with an AVG extension (toolbar).
Start Firefox in [[Safe Mode]] to check if one of the add-ons is causing the problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
* Don't make any changes on the Safe mode start window.
See:
* [[Troubleshooting extensions and themes]]
* [[Troubleshooting plugins]] -
since installing the latest version... when I open a new window it opens everything I have minimized too... very annoying. How can I fix this, I minimize to go back to a window not have multiple windows open.
== This happened ==
Every time Firefox opened
== after installed last version...Well, then isn't there some way to induce Firefox to give Windows parameters that make it open the fershlugginer window in the *same* position, instead of an offset position?
Dafydd -
My company can't use anything beyond ver.3.6 but, I want the latest version. Can I run both?
My company's website can only handle ver 3.6 and I want to run the latest version. Can I run both?
Yes but only one can be your default browser.
See http://kb.mozillazine.org/Using_multiple_profiles_-_Firefox
And take a backup while Firefox is down all of your profiles before hand to an external drive and store offline. It's easy once you've created and used different profiles once. You on a Mac so I can't provide details but you want to backup
starting with the folder above the one your profile is in. You can find the profile
you are by typing about:support into the location bar, then click on button "Open Containing Folder" that is your profile but since you will be having multiple profile go up one more director above that and backup that folder.
Whether you know what do with the backup now is not as important as having them. -
I just updated my pages and now it won't load. This is on my iPad. The first version which has the latest version it can have 5.1 or something like that. I am trying to open a document and am worried that if I uninstall and reinstall I will lose all my documents
I just uninstalled it and am waiting for it to reinstall. I sincerely hope that I have not lost everything that I worked on so hard. Now that mobile me is gone, I have not been able to go between devices to transfer things. I was merely trying to take a document I had worked on and open it in pages, but it said my version was too old. When I updated, it wouldn't load. Now I cannot do anything. I hope that the reinstall fixes it without losing everything. Please advise!!! Yes, I am in panic mode.
-
after updating an older intel macbook to Snow Leopard and ilife 11, Software Update says everything is up to date, but when I try to open iPhoto, it tells me I have to update to the latest version, what can I do?
Download 9.1 and 9.2.3 updates and install them
Maybe you are looking for
-
What is the Tcodes for Uploading of data using BDC & CATT
PP members: I was going through the <b>cutover activities</b> , and what I understood is we transfer all the legacy system data into SAP before going live The data upload follows certain steps (depends on the organizational design load strategies)
-
if Firefox is already running and click on any link in Word, Excel, Outlook, etc. A message box pops up and I have to hit OK to close it. "firefox is already running, but not reponding. To open a new window, you must first close the existing firefox
-
[SOLVED] TF2 (Team Fortress 2) glitchy during gameplay
Check out this awesome glitchy video Any ideas on why this is happening? Thanks! I don't think I got it installed in time for the penguin :-( EDIT, because I forgot to list information: Video card: 05:00.0 VGA compatible controller: Advanced Micro De
-
Manually Move Public Folders from Exchange 2010 to 2013
Hi all, I have a issue to finishing my migration from Exchange 2010 to Exchange 2013, I have been trying to migrate my Public folders but always after a couple hours, the migration state is failed. The final error is the following: FailureCode
-
SM20 : IP/DNS address Terminal column
Hi, English not my main language sorry in advance. I've set a Security Audit Log (SM19/SM20 and mofided my instance profile -> rsau/enable, rsau/local/file, rsau/max_diskspace/local, rsau/selection_slots) All working well but when i ch