Latest version of ITunes has no provision to import CD's
The latest version of ITunes for PC has no provisions to import CD's to my library. Is there a work-around or update?
When you put a CD in your drive, click on the menu;
and when you click on the drive;
Similar Messages
-
The latest version of iTunes has completely changed the format and also why will it not allow me to burn a CD compatible with other devices?
I'm using iTunes 11.1.1 on a Mac mini running OS 10.7.5 and I burn CDs which play in this machine's external optical drive, my car, and the Pioneer audio CD players downstairs. I typically use Verbatim recordble CDs. After selecting the playlist I want to burn, I make sure that "Audio CD" is selected - this has always been the default for me. If this isn't working for you, I don't know what to say - but I'd suspect the drive you're using to burn CDs is getting wonky.
Good luck
srb -
I have a Macbook Pro operating system OSX 10.7.5 My Itunes version is 12.01.26. Here's the problem: with the older versions of ITunes I could connect a device and highlight and drag whatever music I wanted to load from my library to the device. Now, there's a different process which I cannot fathom. I don't want to sync my i-pod every time i want to add music; i don't want to restore my iPhone to do the same or to add photographs which were sent to me and then uploaded to my computer. Can anyone out there give me a step by step process on how to do these what used to be very simple procedures. Thanks in advance. Also, how do I contact someone in Apple who deals with consumer complaints?
Hi Edward,
You should still be able to manually manage the music on your iPhone within iTunes. Make sure that when your iPhone is plugged in, look in the Summary tab to see if “Manually manage music and videos” is enabled and you can even you turn off Automatically Sync when this iPhone is connected. Take a look at the first article below to give more information on that. As far as your other questions about calling someone, I have provided two options for you. If it is for feedback on iTunes, you can use the second link to give detailed feedback on what is going on. If you want to actually talk to someone, the last link has a list of numbers for you to call for any support or service that you may need.
Manage content manually on your iPhone, iPad, and iPod
http://support.apple.com/en-us/HT201593
Product Feedback
http://www.apple.com/feedback/
Contact Apple for support and service
http://support.apple.com/en-us/HT201232
Take it easy,
-Norm G. -
I have three ipod 4th gen and the latest version of itunes has killed them all
can anyone help?
I have had to open the ipods reformat on a pc and reassemle
then the pc will see the ipod and itunes offers to restore.
I pick restore then it says connect to a power source to complete the update
I left it for a day and it still has the connect to power socket picture on the ipod screen
these were all working ipods until version 11 itunes
any help greatly appreciatedHi Edward,
You should still be able to manually manage the music on your iPhone within iTunes. Make sure that when your iPhone is plugged in, look in the Summary tab to see if “Manually manage music and videos” is enabled and you can even you turn off Automatically Sync when this iPhone is connected. Take a look at the first article below to give more information on that. As far as your other questions about calling someone, I have provided two options for you. If it is for feedback on iTunes, you can use the second link to give detailed feedback on what is going on. If you want to actually talk to someone, the last link has a list of numbers for you to call for any support or service that you may need.
Manage content manually on your iPhone, iPad, and iPod
http://support.apple.com/en-us/HT201593
Product Feedback
http://www.apple.com/feedback/
Contact Apple for support and service
http://support.apple.com/en-us/HT201232
Take it easy,
-Norm G. -
I have downloaded the latest version of I tunes but now cannot find the path to sync my Iphone 4 to Outlook calendar and contacts on my PC. can anyone assist?
Does the process described here work for you?
It might be a subset of the steps you have already tried, in which case my apologies, or you might have glossed over them while working through the support document with all its hidden sections.
tt2 -
I'm trying to get this out of the way. I'm getting an error about Apple Mobile Device isnt registering. I have my phone attached but i dont understand what else to do. Any help?
Strip it out and start again.
For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
If you really want to roll back to 11.4 uninstall all iTunes/Apple components as described in the second box, restore the pre-upgrade version of the library as described in Empty/corrupt iTunes library after upgrade/crash, then download and install from one of these direct links:
iTunes 11.4.0.18 for Windows (32-bit) - iTunesSetup.exe (2014-09-09)
iTunes 11.4.0.18 for Windows (64-bit) - iTunes64Setup.exe (2014-09-09)
tt2 -
Why can't I download latest version of iTunes in Windows 8 on my Asus laptop?
When I try to install the latest version of iTunes in Windows 8 on my laptop I get the error "errors occurred during installation before it could be configured. System has not been modified".
When I connect my iphone 4s, I get the message "this iphone cannot be recognized because the latest version of iTunes has not been installed.
Round and round we go!Hey gallaleo3,
I would run through the recommended troubleshooting steps in the following article:
Issues installing iTunes or QuickTime for Windows
http://support.apple.com/kb/HT1926
Best,
Delgadoh -
I have a new laptop with Windows 8 as operating system. Installed latest version of iTunes ontop computer. I can play music in My Library but when I click on iTunes, I get the message " iTunes has stopped working. A problem caused the program to stop working correctly. Windows will close the program and notify if a solution is available."
Anyone know what is the cause and if there is a resolution? Have tried to re-installing iTunes and have also tried restoring laptop to an earlier date.iPad not appearing in iTunes
http://www.apple.com/support/ipad/assistant/itunes/
iOS: Device not recognized in iTunes for Mac OS X
http://support.apple.com/kb/TS1591
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
iTunes for Windows: Device Sync Tests
http://support.apple.com/kb/HT4235
IOS: Syncing with iTunes
http://support.apple.com/kb/HT1386
Apple - Support - iPad - Syncing
http://www.apple.com/support/ipad/syncing/
iTunes 10.5 and later: Troubleshooting iTunes Wi-Fi Syncing
http://support.apple.com/kb/ts4062
The Complete Guide to Using the iTunes Store
http://www.ilounge.com/index.php/articles/comments/the-complete-guide-to-using-t he-itunes-store/
iTunes Store: Associating a device or computer to your Apple ID
http://support.apple.com/kb/ht4627
Can't connect to the iTunes Store
http://support.apple.com/kb/TS1368
iTunes: Advanced iTunes Store troubleshooting
http://support.apple.com/kb/TS3297
Best Fixes for ‘Cannot Connect to iTunes Store’ Errors
http://ipadinsight.com/ipad-tips-tricks/best-fixes-for-cannot-connect-to-itunes- store-errors/
Try this first - Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
This works for some users. Not sure why.
Go to Settings>General>Date and Time> Set Automatically>Off. Set the date ahead by about a year.Then see if you can connect to the store.
Cheers, Tom -
Hi! I can't upgrade my iTunes 10.3.1.55 on my Windows XP 2002 SP3 to the latest version of iTunes. Got the message: "A problem has occured with the Windows Installer-package. A program needed for this installation could not be run." What to do?
Perhaps let's first try updating your Apple Software Update.
Launch Apple Software Update ("Start > All Programs > Apple Software Update"). Does it launch and offer you a newer version of Apple Software Update? If so, choose to install just that update to Apple Software Update. (Deselect any other software offered at the same time.)
If the ASU update goes through okay, try another iTunes install. Does it go through without the errors this time? -
Also, the "burn playlist to disc" command has disappeared from the File options. I downloaded the latest version of iTunes but that only restored tracks I'd bought from the iTunes store. I also tried setting up another logon.
Empty/corrupt library after upgrade/crash
Hopefully it's not been too long since you last upgraded iTunes, in fact if you get an empty/incomplete library immediately after upgrading then with the following steps you shouldn't lose a thing or need to do any further housekeeping. Note that in iTunes 11 an "empty" library may show your past purchases with links to stream or download them.
In the Previous iTunes Libraries folder should be a number of dated iTunes Library files. Take the most recent of these and copy it into the iTunes folder. Rename iTunes Library.itl as iTunes Library (Corrupt).itl and then rename the restored file as iTunes Library.itl. Start iTunes. Should all be good, bar any recent additions to or deletions from your library.
Alternatively, depending on exactly when and why the library went missing, there may be a more recent .tmp file in the main iTunes folder that can be copied & renamed as iTunes Library.itl to restore the library to an earlier state. Look for a recent .tmp file that is similar in size to the .itl files in the Previous iTunes Libraries folder. If it has happened repeatedly you may want the earliest such file generated since the last iTunes upgrade.
If applicable, see iTunes Folder Watch for a tool to catch up with any changes since the backup file was created.
When you get it all working make a backup!
Should you be in the unfortunate position where you are no longer able to access your original library, or a backup of it, then see Recover your iTunes library from your iPod or iOS device.
I've noticed more of these missing library posts of late and a common factor to most since I started asking is AVG Anti-Virus. It seems in some cases it might be at least part of the reason why the library file disappears. Try excluding the iTunes folder from any AV scanning process.
tt2 -
I can not dowload the new updated software for my Ipod touch 4G. When i do I get an error message that says Network connection has timed out. I have done the trouble shooting steps. Downloaded the latest version of Itunes, and checked network connection
Disabling the computer's antivirus and firewall during the download and update usually resolves the timeout error.
-
When I try to download the latest version of iTunes from apple.com, I get the message "Content was blocked because it was not signed by a valid security certificate."When I open iTunes and try to download the latest version there, I get the message "iTunes has an invalid signature. The download has been removed." I have also gotten an Internet Script Error stating that an error has occured in Line 0, Char O and that "Access is denied to images.apple.com/global/scripts/lib/iepngfix.htc." This problem has never occurred with earlier versions of ITunes. Anyone know how to fix this problem?
Are you downloading iTunes form an Apple website or somewhere else? If the answer is somewhere else, try downloading it from Apple. Click on iTunes in the black menu bar above and go from there.
Let us know what happens. -
I tried to download the latest version of iTunes but failed half way through. It suggested that i reinstall we I tried. However, i now get this message which states "Application has failed to start because MSVCR80.dll was not found. Reinstalling the application may fix the problem"
I have tried this but with no success. I have therefore found that I cannot access my iTunes library at all now.
What should I do.Click here and follow the instructions. You may need to completely remove and reinstall iTunes and all related components, or run the process multiple times; this won't normally affect its library, but that should be backed up anyway.
(99792) -
After installing the latest version of ITunes I get an error message that says this application has failed to start because MSVCR80.dll was not found. how do I get Itunes to start working again?
See... Unable to install or open > http://support.apple.com/kb/TS5376
Also See this User Tip by turingtest2
https://discussions.apple.com/docs/DOC-6562 -
I can not sync my IPhone to My Imac. I have the latest version of ITunes on my Imac. I have tried reseting my phone (3), changing ports. Nothing works. I was thinking maybe my phone has the earlier version of ITunes but I can't update it.
Did you already have a look at this article?
iPhone, iPad, iPod touch: Device not recognized in iTunes for Mac OS X
Maybe you are looking for
-
Getting fed up after almost 3 months of issues the...
Hi, well long story that around 3 months ago my net connection went down (solid amber light) got a BT engineer visit though 2 hours before he came the Internet connect came back up. The Engineer keep his appointment and re-wired everything for me and
-
How to mirror iPad video using ATVS and wireless projector
I have an iPad2 (iOS 7.1.2) that I have connected to an Apple TV, - which is connected to a wireless projector. It works great except when I try to play video. It doesn't matter what type of video...movies, user created, safari website...I get a mes
-
Hello, Since a couple of hours, my Ethernet interface (through a Thunderbolt or USB connector) remains "not connected". I couldn't find a clear answer to this problem ... Any idea ?
-
Hi everyone, I have a report that uses a strongly typed ref cursor to get its data. When I run the report on my local machine (oc4j and report server running on my local machine), the report runs fine. That makes me believe that the data types being
-
Batch Rename causes error with 1000 files
If I perform a batch rename with more than 1000 files or more I get an error filled batch rename. I may have 6 difference sets of model poses with unique numeric names. I select all files and rename with model's name and named sequentially with a