Latest Vista 64 bit drivers not install

It don't matter what I do, I cannot get the "SBXF_PCDVTBETA_L3_2_0_0000" drivers working with my X-fi Fatality sound card.
Things I have done:
Turned off the signiture thingy as per the read-me (both at start-up and premient way)
Turned off windows firewall
Turned off Windows Defender
No Antivirus/Firewall/Spyware/Adware protection
Run the file as a normal user and right clicked and selected "run as administrator".
Made sure no previous sound drivers were installed.
As soon as it gets to the "Updating the windows files", I get another box come up:
Creative Device Driver Installation has stopped working.
A problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is avalible.
The only button I have is, close program, I click that and it goes to the audio console. At that stage I cancel the installation because ther sound apps dont work without the sound driver.
So I am left with a very muted PC.
My PC Specs:
Windows Vista Beta 2 5384
AMD Athlon 4000 2.4 Ghz
Asus Geforce 7800GT
2GB of RAM
Proacti've Asus A8n-Sli Deluxe Motherboard
Asus TV card
Creative X-fi Fataty Soundcard
Logitech 2. Speakers
Hopefully somebody can help me out with my issue
Thanks alot
Scott Seggons Message Edited by Seggons on 07-5-2006 09:05 PM

Boot Camp will not support Vista on newer iMacs, you will need to upgrade to Windows 7. Also as an FYI there is a Boot Camp forum, you can locate it by clicking Apple Support Communities and then in the search field type Boot Camp.
Best of luck,
Roger

Similar Messages

  • Windows 7  64 bit will not install itunes..it tries to install and keeps telling quick time for windows did not properly install  any help?

    windows 7  64 bit will not install itunes..it tries to install and keeps telling quick time for windows did not properly install  any help?

    Hi Tamekia,
    I am sorry to hear nothing has worked yet. I have looked up some additional information and possible solutions. Follow the steps in this document to perform a level-three uninstall, register the Windows Installer Service, and then reinstall the HP software. An uninstall and reinstall of the software deletes and overwrites any of the files that might cause the error and resets the Windows Installer. HP recommends that you download the latest software from the HP Web site to remove any files that might be causing this error.
    Level-three uninstall, and register the Windows Installer Service
    Note: The title of this document is not specific to the issue you are experiencing or the operating system you have, but the 3 steps and instructions are what I suggest we do to resolve the issue you are experiencing.
    Hope this helps.
    Please click the Thumbs up icon below to thank me for responding.
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Sunshyn2005 - I work on behalf of HP

  • HP 5610xi "drivers not installed"

    Setup and printed from a HP 5610xi on a iBook G4 (10.3.9) using USB. Then tried to setup through Airport Express (USB printing enabled)-Rendezvous 'sees' the printer but "drivers not installed' message stops the process? 'Latest' HP drivers are installed

    HP 'answered' my question - the 5610 AIO is not compatible with the Airport Express! Compatible list is at: http://h10025.www1.hp.com/ewfrf/wc/genericDocument?lc=en&cc=us&docname=c00035369

  • 309g printer will install wireless on Vista but will not install on XP

    Trying to install Photosmart 309g printer wireless, will install on computer with Vista but will not install on computer with XP, it finds printer on network but fails part way thur install. Installes great on Vista computer. What can I do??

    The steps for XP in this document from HP are a great start to resolving issues of this nature.  While the behavior is not exactly identical, the steps have the best chance of resolving the issue.
    ↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

  • PC suite - Cable drivers not installed???

    After installing the PC suite VER 6.82.22.0, though PC recognizes N70 phone, the PC suite does not get connected. When clicked 'About PC suite' and 'system info', message cable drivers not installed is found. However, if checked in the control panel, the drivers are found installed. The earlier version did not have any problems. Can any body solve this.

    try this:
    /discussions/board/message?board.id=pcsuite&message.id=11480

  • Computer says itunes drivers not installed?

    computer doesnt recognize ipods. tried to update itunes and it shut my computer down and blew out all my ports. had computer repaired, seems that update worked but cant plug in ipods to sync music and the box comes up saying the itunes drivers not installed. how do i install them? im  a little hesitant to download itunes again after what happened last time, so just wanted some advice.

    No, you will not lose your library. The actual installation and where your files are stored are in separate locations. When you uninstall, you are only uninstalling the program, and therefore, your library will not be affected.
    Only thing to note is if you changed the location of your itunes library, you will have to tell itunes where you keep your library, so itunes can load it from there.

  • TS3212 When I upgraded to the latest iTunes, it did not install properly on my PC. I get the message: Runtime Error, Program C:\Program Files (x86), R6034, An application made an attempt to laod C runtime library incorrelcty. I have empted temp folder & r

    When I upgraded iTunes to the latest version, it did not install proberly. I get the message: Runtime error, Program C\Program Files (x86), R6034, An application has made an attempt to load C runtime library incorreltyl. I have empted all of the temp folder I can find, uninstalled iTunes, and restarted my PC. How can I get iTunes to load properly?

    Click here and follow the instructions.
    (99035)

  • TS1538 I have a 4th generation iPod. My system is Windows 7 64-bit. iPod not recognized in iTunes. Also getting iTunes error about cd/dvd drivers not installed. I have reinstalled 4 times and finally got iPod software installed properly. Please help!

    I have a 4th generation iPod. My system is Windows 7, 64-bit. iPod not recognized in iTunes. It is in my computer. Also getting iTunes error message about cd/dvd drivers not properly installed. I've restalled 5 times and still not working.  Finally got iPod software to properly install. Please help!

    Did you try this:
    Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7

  • S206 Windows 8 64-bit drivers: Not a smooth install

    I've just taken the plunge for Windows 8 via the upgrade offer, but seeing as I already got a copy for my desktop PC with the 64-bit disc included, and that the S206 I bought came preinstalled with 4Gb of RAM (almost half of which is unusable in a 32-bit environment), I decided to boot from the 64-bit disc through an external USB DVD rewriter and install fresh. I had previously made sure that the Lenovo support site had Windows 8 64-bit drivers available.
    Well, was I in for a shock.
    First of all, practically every installer tried to extract to the C:\Drivers folder, dumping all the files in a single subfolder with no hierarchy. Then it tried to access the individual files from sub-subfolders which didn't exist. The only way I could get them to install was to create the folders it was missing as the error messages cropped up, dump a copy of the driver files into those folders, click retry, and repeat until it said it was done.
    Secondly, the Catalyst drivers didn't find any graphics card. I downloaded the latest version from the AMD website, and that picked it up fine.
    Thirdly, when I installed the audio driver, it said that the device I had was not the one that the drivers were intended for, and it would install generic drivers instead.
    Fourthly, the Lenovo energy management program defaulted to the balanced profile which was the only one to totally disable the backlight to the LCD screen. Boy did that one take some time to sort out.
    Fifthly, installing the wireless and Bluetooth driver seems to have not added in Bluetooth. I'm fairly sure it had Bluetooth to start with. The network adapter is still using the Microsoft driver.
    Sixthly, the webcam does not appear in my devices list. Skype can't see it at all. Neither driver supplied on the website can actually find a device. I have just had the laptop back from repair due to a faulty keyboard, and I've not actually had a need to test it before now so I wonder if it maybe was left disconnected or maybe the camera in the screen frame is a dummy - I may have to restore the old Windows 7 operating system to check that...
    Finally, when I tried to install the Synaptics touchpad drivers, clearly marked as 32 and 64 bit in a single installer, the installer told me it's not designed for a 64-bit system and told me to get the correct version from my vendor! The Synaptics website doesn't have Windows 8 drivers up yet.
    So basically the default drivers leave the PC in a working condition but I currently have no Bluetooth, no webcam, I'm stuck on either high or low performance energy management, basic audio with no options, basic touchpad with no configuration.
    So, for Lenovo: Your drivers leave a lot to be desired and need reviewing.
    For other users: If you want to adopt 64-bit Windows 8, prepare to spend a lot of time fiddling with drivers.
    For anyone with more knowledge than me: Can anyone suggest how I might get the above hardware fully functional?

    After seeing that Lenovo have updated some of their installers, I decided to give it another go and see if I could get 64-bit Windows 8 on it.
    First hitch, it was a bit of a struggle getting the computer to recognise the USB DVD drive. In the end I had to plug it into the USB2 port (The not-blue one), go into BIOS, save and exit and immediately go back into BIOS before it would be recognised as hardware.
    It seems Lenovo overhauled all their installers, because they all extracted with the correct folder hierarchy. The only problem was with the "WLAN Driver and Bluetooth Driver (Ralink, Atheros)" (0swg11ww.exe) which totally failed to find the correct target installation executables after extraction. Also I'm sure this laptop had bluetooth connectivity but it didn't find any bluetooth hardware, but I'm not bothered too much about that as I use Logitech devices with unifying recievers anyway. When I finished installing them manually I checked on a tip-off I read elsewhere on these forums that the installer keeps the computer using the Microsoft driver, rather than switching to the Broadcom driver. I told it to change drivers (Some fiddling about in Device Manager) and it works fine.
    Lenovo Energy Management still installs with the "Balanced" profile having zero backlight brightness, totally out-of-line with the other two profiles. I note that while the RSS feed says Lenovo Energy Management was updated on 29/11/2012, the download page says the latest version available is the initial 24/10/2012 release. Also the WLAN/Bluetooth driver was supposedly updated on 09/01/2013 but the download page says the latest revision was released on 09/12/2012, and when I installed the AMD Catalyst graphics drivers (supposedly v8.0.881.0) it actually installed the latest version (v12.10).
    Clearly in the case of the Catalyst drivers the page hasn't been updated to reflect the updated driver release, but the on the other hand Lenovo Energy Management software doesn't appear to have been updated at all. At least I have a copy of all the install files now though, so I can tell if anything does change by inspecting file sizes.
    The computer is now in as useable a state as I would like it however, and this time it was for the most part a fairly smooth install.

  • After I installed the latest update, MSVCR80 was not installed and itunes will not work

    After I installed the latest updat to itunes, it did not install properly. I received the following messages:
    Service "Apple Mobile Devise (Apple Mobile Devise) failed to start. verify that you have sufficent privileges to start system services Abort, Retry, Ignore
    Itunes was not installed correctly. Please reinstall itunes. Error 7 (Windows error 126)
    When I click on the itunes icon, I get the following message:
    The computer can not start because MSVCR80.dll is missing from your compyter. Try reinstalling the program to fix this problem.

    I've revised my advice slightly...
    Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
    Remove all of these items in the following order:
    iTunes
    Apple Software Update
    Apple Mobile Device Support (if this won't uninstall go to the next item)
    Bonjour
    Apple Application Support
    Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
    The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
    Please note:
    Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
    HT1925: Removing and Reinstalling iTunes for Windows XP
    HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
    Should you get the error iTunes.exe - Entry Point Not Found after the above then search the computer for copies of the file QTMovieWin.dll - you should only have one copy in the relevant folder for your system.
    C:\Program Files\Common Files\Apple\Apple Application Support (32-bit Windows)
    C:\Program Files (x86)\Common Files\Apple\Apple Application Support (62-bit Windows)
    Delete any others and not only should this fix the problem, but prevent it from recuring on subsequent updates.
    tt2

  • Device drivers not installing

    GOt a palm pilot tx, need to put a kaba access control system on it.  Tried win 7 64 bit computer, vista 32 bit computer, xp 32 bit computer and win 2000 computer.  drivers will not install with plug and play nor with installation cd.  I can't find anything online, as I am the only IT guy and I have many projects on the go right now.  Any help would be appreciated.
    Post relates to: Palm TX

    PalmOS devices do not use "plug and play" to install software.  They use a software program called "Quick Install" to install apps.  Install Palm Desktop on the 32bit XP computer, then try the installation disk.
    Echoing what smkranz said, are you sure you're trying to install a PalmOS program?
    WyreNut
    I am a Volunteer here, not employed by HP.
    You too can become an HP Expert! Details HERE!
    If my post has helped you, click the Kudos Thumbs up!
    If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

  • Windows 7 (64-bit) did not install scanner part of 1310 Series 1315xi.,,

    Just bought 64-bit Windows 7, which  detected and reInstalled my All-in-One's Printer and Copier, working well, so I don't want to buy new,  but did  not  install  Scanner.   My 1310 Series installation disk was  not  for  Windows 7, actually, nothing past  Vista and XP, and   Win 7 doesn't  seem to be recognizing  even  new  dIsks, taking it in tomorrow for a D-Drive. Is   there  a  1310 Series  installation disk   for  Windows  7?   My All-in-One is actually year  2004 ,   1315xi,  and   when  I bought it,  only the Series disk would install  it.    The  printing and copying  equipment works   so  well  that  I  do  not  want  to  buy a  new  printer.   Would I have to first UnInstall  the whole thing to use  new  installation  disk  to  include  Scanning?  Thanks in  Advance.     
    This question was solved.
    View Solution.

    You need to have the TWAIN driver for the 1315xi in order to use the scanner.
    There is no Windows 7 scanner software available from HP.
    Please mark the post that solves your issue as "Accept as Solution".
    If my answer was helpful click the “Thumbs Up" on the left to say “Thanks”!
    I am not a HP employee.

  • CD drivers not installed on PSE 5

    I'm using ver 5 on a new machine (Vista 64 bit) and things are going fine with the program.
    Except, when I want to burn a disc. I get the message: The CD device driver is not installed. Please reinstall Photoshop Elements.
    I did. Still the same result and the same message.
    Is this link the solution to this problem?
    http://www.adobe.com/go/kb402306
    Thanks.
    Al

    Hi,
    Did you try burning a CD with a software other than Photoshop Elements, Something like Nero? Are you able to burn your discs through that?
    - Priyanka

  • ISE Webpack, Cable Drivers not installing for Debian Wheezy

    Trying to install ISE Webpack with cable drivers yield the following error during installation:
    Driver installation failed. Please check the /.xinstall/install.log file for more information on the cause of the installation failure.
    Since drivers are not installed, attempting to launch iMPACT later on gives:
    WARNING:iMPACT - Module windrvr6 is not loaded. Please reinstall the cable drivers. See Answer Record 22648.
    WARNING:iMPACT - Module windrvr6 is not loaded. Please reinstall the cable drivers. See Answer Record 22648.
    WARNING:iMPACT - Module windrvr6 is not loaded. Please reinstall the cable drivers. See Answer Record 22648.
    WARNING:iMPACT - Module windrvr6 is not loaded. Please reinstall the cable drivers. See Answer Record 22648.
    WARNING:iMPACT - Module windrvr6 is not loaded. Please reinstall the cable drivers. See Answer Record 22648.
    WARNING:iMPACT:923 - Can not find cable, check cable setup !
    The entire install.log can be found here:
    --Install log = /tmp/xilinx_ise_webpack/14.7/ISE_DS/.xinstall/install.log
    --Installing cable drivers.
    --Driver versions in this package: windrvr=1301, xpc4drvr=1041
    --Script name = /tmp/xilinx_ise_webpack/14.7/ISE_DS/common/bin/lin64/install_script/install_drivers/install_drivers
    --HostName = invidia
    --Current working dir = /home/andreas/documents/diku/master_thesis/Xilinx_ISE_DS_14.7_1015_1-1
    --Script location = /home/andreas/documents/diku/master_thesis/Xilinx_ISE_DS_14.7_1015_1-1
    --Script argument=/tmp/xilinx_ise_webpack/14.7/ISE_DS/ISE.
    Digilent Cable Drivers Installer
    Checking for prerequisite: libusb-1.0
    libusb-1.0.so.0 is present
    Installing component: Digilent Adept Runtime
    Adept Runtime Installer
    64-bit operating system detected
    Installing runtime libraries.....
    Checking to see if libdabs.so is already installed....
    Existing installation of libdabs.so found. Checking to see if this version should be installed.
    Version 2.11.1 is currently installed. Version libdabs.so.2.11.1 will not be installed.
    Checking to see if libdaci.so is already installed....
    Existing installation of libdaci.so found. Checking to see if this version should be installed.
    Version 2.7.2 is currently installed. Version libdaci.so.2.7.2 will not be installed.
    Checking to see if libdaio.so is already installed....
    Existing installation of libdaio.so found. Checking to see if this version should be installed.
    Version 2.7.2 is currently installed. Version libdaio.so.2.7.2 will not be installed.
    Checking to see if libdemc.so is already installed....
    Existing installation of libdemc.so found. Checking to see if this version should be installed.
    Version 2.7.2 is currently installed. Version libdemc.so.2.7.2 will not be installed.
    Checking to see if libdepp.so is already installed....
    Existing installation of libdepp.so found. Checking to see if this version should be installed.
    Version 2.7.2 is currently installed. Version libdepp.so.2.7.2 will not be installed.
    Checking to see if libdftd2xx.so is already installed....
    Existing installation of libdftd2xx.so found. Checking to see if this version should be installed.
    Version 1.0.1 is currently installed. Version libdftd2xx.so.1.0.1 will not be installed.
    Checking to see if libdgio.so is already installed....
    Existing installation of libdgio.so found. Checking to see if this version should be installed.
    Version 2.7.2 is currently installed. Version libdgio.so.2.7.2 will not be installed.
    Checking to see if libdjtg.so is already installed....
    Existing installation of libdjtg.so found. Checking to see if this version should be installed.
    Version 2.10.1 is currently installed. Version libdjtg.so.2.10.1 will not be installed.
    Checking to see if libdmgr.so is already installed....
    Existing installation of libdmgr.so found. Checking to see if this version should be installed.
    Version 2.7.2 is currently installed. Version libdmgr.so.2.7.2 will not be installed.
    Checking to see if libdmgt.so is already installed....
    Existing installation of libdmgt.so found. Checking to see if this version should be installed.
    Version 2.7.2 is currently installed. Version libdmgt.so.2.7.2 will not be installed.
    Checking to see if libdpcomm.so is already installed....
    Existing installation of libdpcomm.so found. Checking to see if this version should be installed.
    Version 2.10.1 is currently installed. Version libdpcomm.so.2.10.1 will not be installed.
    Checking to see if libdpcutil.so is already installed....
    Existing installation of libdpcutil.so found. Checking to see if this version should be installed.
    Version 2.7.2 is currently installed. Version libdpcutil.so.2.7.2 will not be installed.
    Checking to see if libdpio.so is already installed....
    Existing installation of libdpio.so found. Checking to see if this version should be installed.
    Version 2.7.2 is currently installed. Version libdpio.so.2.7.2 will not be installed.
    Checking to see if libdpti.so is already installed....
    Existing installation of libdpti.so found. Checking to see if this version should be installed.
    Version 2.8.2 is currently installed. Version libdpti.so.2.8.2 will not be installed.
    Checking to see if libdspi.so is already installed....
    Existing installation of libdspi.so found. Checking to see if this version should be installed.
    Version 2.8.2 is currently installed. Version libdspi.so.2.8.2 will not be installed.
    Checking to see if libdstm.so is already installed....
    Existing installation of libdstm.so found. Checking to see if this version should be installed.
    Version 2.7.2 is currently installed. Version libdstm.so.2.7.2 will not be installed.
    Checking to see if libdtwi.so is already installed....
    Existing installation of libdtwi.so found. Checking to see if this version should be installed.
    Version 2.7.2 is currently installed. Version libdtwi.so.2.7.2 will not be installed.
    Checking to see if libjtsc.so is already installed....
    Existing installation of libjtsc.so found. Checking to see if this version should be installed.
    Version 2.7.2 is currently installed. Version libjtsc.so.2.7.2 will not be installed.
    Successfully installed runtime libraries.
    Installing system binaries.....
    installed "/usr/local/sbin/dftdrvdtch"
    Successfully installed system binaries in "/usr/local/sbin".
    Installing firmware images.....
    Successfully installed firmware images in "/usr/local/share/digilent/data/firmware".
    Installing JTSC device list.....
    Successfully installed JTSC device list "/usr/local/share/digilent/data/jtscdvclist.txt".
    Installing CoolRunner support files.....
    Successfully installed CoolRunner support files in "/usr/local/share/digilent/data/xpla3".
    Installing CoolRunner 2 support files.....
    Successfully installed CoolRunner 2 support files in "/usr/local/share/digilent/data/xbr".
    Installing Adept Runtime configuration.....
    Successfully installed Adept Runtime configuration "/etc/digilent-adept.conf".
    Installing USB UDEV rules.....
    Successfully installed USB UDEV rules "/etc/udev/rules.d/52-digilent-usb.rules".
    Successfully reloaded UDEV rules.
    Successfully updated dynamic loader cache.
    Successfully installed Adept Runtime.
    Successfully installed component: Digilent Adept Runtime
    Installing component: FTDI Drivers (libftd2xx)
    FTDI Driver Installer
    64-bit operating system detected
    Checking to see if libftd2xx.so is already installed....
    Existing installation of libftd2xx.so found. Checking to see if this version should be installed.
    Version 1.0.4 is currently installed. Version libftd2xx.so.1.0.4 will not be installed.
    Successfully updated dynamic loader cache
    Successfully installed FTDI Driver
    Successfully installed component: FTDI Drivers (libftd2xx)
    Installing component: libCseDigilent
    Installer for Plugins for Xilinx Tools
    Plugins will be installed in the following directory: "/tmp/xilinx_ise_webpack/14.7/ISE_DS/ISE"
    Found plugin "libCseDigilent" version "14.1" by "Digilent".
    Successfully installed plugin in "/tmp/xilinx_ise_webpack/14.7/ISE_DS/ISE/lib/lin64/plugins/Digilent/libCseDigilent".
    Successfully installed 1 plugin(s) for Xilinx Tools.
    Successfully installed component: libCseDigilent
    Successfully installed Digilent Cable Drivers
    --Kernel version = 3.2.0-4-amd64.
    --Arch = x86_64.
    --Installer version = 1100
    --Unsetting ARCH environment variable.
    --File /lib/modules/misc/install_windrvr6 does not exist.
    --Installing USB drivers------------------------------------------
    --File /etc/hotplug/usb/xusbdfwu.fw/xusbdfwu.hex exists.
    --File /etc/hotplug/usb/xusbdfwu.fw/xusbdfwu.hex version = 1030
    --File xusbdfwu.hex exists.
    --File xusbdfwu.hex version = 1030
    --File xusbdfwu.hex is already updated.
    --File /etc/hotplug/usb/xusbdfwu.fw/xusb_xlp.hex exists.
    --File /etc/hotplug/usb/xusbdfwu.fw/xusb_xlp.hex version = 1028
    --File xusb_xlp.hex exists.
    --File xusb_xlp.hex version = 1028
    --File xusb_xlp.hex is already updated.
    --File /etc/hotplug/usb/xusbdfwu.fw/xusb_emb.hex exists.
    --File /etc/hotplug/usb/xusbdfwu.fw/xusb_emb.hex version = 1028
    --File xusb_emb.hex exists.
    --File xusb_emb.hex version = 1028
    --File xusb_emb.hex is already updated.
    --File /etc/hotplug/usb/xusbdfwu.fw/xusb_xpr.hex exists.
    --File /etc/hotplug/usb/xusbdfwu.fw/xusb_xpr.hex version = 2004
    --File xusb_xpr.hex exists.
    --File xusb_xpr.hex version = 2004
    --File xusb_xpr.hex is already updated.
    --File /etc/hotplug/usb/xusbdfwu.fw/xusb_xup.hex exists.
    --File /etc/hotplug/usb/xusbdfwu.fw/xusb_xup.hex version = 1030
    --File xusb_xup.hex exists.
    --File xusb_xup.hex version = 1030
    --File xusb_xup.hex is already updated.
    --File /etc/hotplug/usb/xusbdfwu.fw/xusb_xp2.hex exists.
    --File /etc/hotplug/usb/xusbdfwu.fw/xusb_xp2.hex version = 2300
    --File xusb_xp2.hex exists.
    --File xusb_xp2.hex version = 2300
    --File xusb_xp2.hex is already updated.
    --File /etc/hotplug/usb/xusbdfwu.fw/xusb_xse.hex exists.
    --File /etc/hotplug/usb/xusbdfwu.fw/xusb_xse.hex version = 2006
    --File xusb_xse.hex exists.
    --File xusb_xse.hex version = 2006
    --File xusb_xse.hex is already updated.
    --Product ID 0007 is already in the usermap.
    --Product ID 0009 is already in the usermap.
    --Product ID 000d is already in the usermap.
    --Product ID 000f is already in the usermap.
    --Product ID 0013 is already in the usermap.
    --Product ID 0015 is already in the usermap.
    --Product ID 0008 is already in the usermap.
    --Installing windrvr6---------------------------------------------
    --Checking version.
    --File /lib/modules/3.2.0-4-amd64/kernel/drivers/misc/windrvr6.ko does not exist.
    --File LINUX.3.2.0-4-amd64.x86_64/windrvr6.ko does not exist.
    --Setting source version to 1301.
    --File LINUX.3.2.0-4-amd64.x86_64/windrvr6.ko is newer than the destination file.
    USE_KBUILD = no
    checking for cpu architecture... x86_64
    checking for WinDriver root directory... /tmp/xilinx_ise_webpack/14.7/ISE_DS/common/bin/lin64/install_script/install_drivers/linux_drivers/windriver64
    checking for linux kernel source... found at /lib/modules/3.2.0-4-amd64/build
    checking for lib directory... ln -sf $(ROOT_DIR)/lib/$(SHARED_OBJECT)_32.so /usr/lib/$(SHARED_OBJECT).so; ln -sf $(ROOT_DIR)/lib/$(SHARED_OBJECT).so /usr/lib64/$(SHARED_OBJECT).so
    checking which directories to include... -I/lib/modules/3.2.0-4-amd64/source/include
    checking linux kernel version... not found
    make -f makefile.wd clean
    make[1]: Entering directory `/tmp/xilinx_ise_webpack/14.7/ISE_DS/common/bin/lin64/install_script/install_drivers/linux_drivers/windriver64/windrvr'
    make[1]: Leaving directory `/tmp/xilinx_ise_webpack/14.7/ISE_DS/common/bin/lin64/install_script/install_drivers/linux_drivers/windriver64/windrvr'
    make -f makefile.wd
    make[1]: Entering directory `/tmp/xilinx_ise_webpack/14.7/ISE_DS/common/bin/lin64/install_script/install_drivers/linux_drivers/windriver64/windrvr'
    make[1]: Leaving directory `/tmp/xilinx_ise_webpack/14.7/ISE_DS/common/bin/lin64/install_script/install_drivers/linux_drivers/windriver64/windrvr'
    make -f makefile.wd
    make[1]: Entering directory `/tmp/xilinx_ise_webpack/14.7/ISE_DS/common/bin/lin64/install_script/install_drivers/linux_drivers/windriver64/windrvr'
    make[1]: Leaving directory `/tmp/xilinx_ise_webpack/14.7/ISE_DS/common/bin/lin64/install_script/install_drivers/linux_drivers/windriver64/windrvr'
    --make windrvr install rc= 2
    --install_windrvr6 rc = 2
    --Module windrvr6 is not running.
    --Module xpc4drvr is not running.
    --Note: By default, the file permission of /dev/windrvr6 is enabled for the root user only
    and must be changed to allow access to other users.
    --real rc=2
    --Driver installation failed.
    --Digilent Return code = 0
    --Xilinx Return code = 1
    --Return code = 1
    INFO ::Mon Dec 02 10:59:01 TZ 2013:: Console message preference has been changed to INFO
    INFO ::Mon Dec 02 10:59:01 TZ 2013:: Xilinx Installer/Updater launched.
    INFO ::Mon Dec 02 10:59:05 TZ 2013:: Proxy choice: IE
    INFO ::Mon Dec 02 10:59:05 TZ 2013:: install version: 14.7
    INFO ::Mon Dec 02 10:59:05 TZ 2013:: dat file URL: www.xilinx.com/direct/swhelp/14_wiclient.dat
    INFO ::Mon Dec 02 11:03:14 TZ 2013:: Install Location: /tmp/xilinx_ise_webpack/14.7/ISE_DS
    INFO ::Mon Dec 02 11:03:14 TZ 2013:: Option: Acquire or Manage a License Key
    INFO ::Mon Dec 02 11:03:14 TZ 2013:: Edition : ISE WebPACK
    INFO ::Mon Dec 02 11:03:14 TZ 2013:: ISE DS Common
    INFO ::Mon Dec 02 11:03:14 TZ 2013:: Install Location: common
    INFO ::Mon Dec 02 11:03:14 TZ 2013:: Module: ISE DS Common
    INFO ::Mon Dec 02 11:03:14 TZ 2013:: EDK
    INFO ::Mon Dec 02 11:03:14 TZ 2013:: Install Location: EDK
    INFO ::Mon Dec 02 11:03:14 TZ 2013:: Module: EDK
    INFO ::Mon Dec 02 11:03:14 TZ 2013:: PlanAhead Analysis Tool
    INFO ::Mon Dec 02 11:03:14 TZ 2013:: Install Location: PlanAhead
    INFO ::Mon Dec 02 11:03:14 TZ 2013:: Module: PlanAhead Files
    INFO ::Mon Dec 02 11:03:14 TZ 2013:: Option: setupEnv.sh
    INFO ::Mon Dec 02 11:03:14 TZ 2013:: ISE
    INFO ::Mon Dec 02 11:03:14 TZ 2013:: Install Location: ISE
    INFO ::Mon Dec 02 11:03:14 TZ 2013:: Module: Design Environment Tools
    INFO ::Mon Dec 02 11:03:14 TZ 2013:: Module: WebPACK Devices
    INFO ::Mon Dec 02 11:03:14 TZ 2013:: Option: Install Linux System Generator Info XML
    INFO ::Mon Dec 02 11:03:14 TZ 2013:: Option: Ensure Linux System Generator Symlinks
    INFO ::Mon Dec 02 11:03:14 TZ 2013:: Option: Enable WebTalk to send software, IP and device usage statistics to Xilinx (Always enabled for WebPACK license)
    INFO ::Mon Dec 02 11:03:14 TZ 2013:: Option: Install Cable Drivers
    INFO ::Mon Dec 02 11:08:59 TZ 2013:: fileset.txt written.
    INFO ::Mon Dec 02 11:08:59 TZ 2013:: Migrating registry and creating file association
    WARN ::Mon Dec 02 11:08:59 TZ 2013:: Unable to copy "/home/andreas/documents/diku/master_thesis/Xilinx_ISE_DS_14.7_1015_1-1/common/idata/.pref.bin" to "/tmp/xilinx_ise_webpack/14.7/ISE_DS/common/.xinstall/idata/.pref.bin" source does not exist.
    INFO ::Mon Dec 02 11:09:00 TZ 2013:: Post-GUI updates completed.
    INFO ::Mon Dec 02 11:11:41 TZ 2013:: fileset.txt written.
    INFO ::Mon Dec 02 11:11:41 TZ 2013:: Migrating registry and creating file association
    INFO ::Mon Dec 02 11:11:42 TZ 2013:: Post-GUI updates completed.
    INFO ::Mon Dec 02 11:13:23 TZ 2013:: fileset.txt written.
    INFO ::Mon Dec 02 11:13:23 TZ 2013:: Migrating registry and creating file association
    INFO ::Mon Dec 02 11:13:24 TZ 2013:: Post-GUI updates completed.
    INFO ::Mon Dec 02 11:19:00 TZ 2013:: fileset.txt written.
    INFO ::Mon Dec 02 11:19:00 TZ 2013:: Migrating registry and creating file association
    INFO ::Mon Dec 02 11:19:01 TZ 2013:: Post-GUI updates completed.
    INFO ::Mon Dec 02 11:19:07 TZ 2013:: Execute: setupEnv.sh
    INFO ::Mon Dec 02 11:19:07 TZ 2013:: Execute: Install Linux System Generator Info XML
    INFO ::Mon Dec 02 11:19:07 TZ 2013:: Execute: /tmp/xilinx_ise_webpack/14.7/ISE_DS/ISE/sysgen/util/ensure_symlinks.sh /tmp/xilinx_ise_webpack/14.7/ISE_DS/ISE/sysgen lin64
    INFO ::Mon Dec 02 11:19:07 TZ 2013:: Execute: /tmp/xilinx_ise_webpack/14.7/ISE_DS/PlanAhead/data/webtalk/webtalk_install.sh on
    INFO ::Mon Dec 02 11:19:07 TZ 2013:: Execute: /bin/sh -c "/tmp/xilinx_ise_webpack/14.7/ISE_DS/common/bin/lin64/install_script/install_drivers/install_drivers >>/tmp/xilinx_ise_webpack/14.7/ISE_DS/.xinstall/install.log /tmp/xilinx_ise_webpack/14.7/ISE_DS/ISE"
    INFO ::Mon Dec 02 11:19:14 TZ 2013:: Driver installation failed. Please check the /.xinstall/install.log file for more information on the cause of the installation failure.
    INFO ::Mon Dec 02 11:19:36 TZ 2013:: Execute: /tmp/xilinx_ise_webpack/14.7/ISE_DS/common/bin/lin64/xlcm
    INFO ::Mon Dec 02 11:20:14 TZ 2013:: Xilinx Installer/Updater exited with return status "0".
    INFO ::Mon Dec 02 11:20:14 TZ 2013:: ################################################################
    What are the steps required to fix the drivers on Debian Wheezy?
    Thanks in advance
    Andreas Frisch

    I'm a bit surprised that the only supported Linux distros are commercial (costing money) distros!
    What's the point in providing Linux support for your tools then. The overwhelming majority of Linux users use free distros like Mint, Ubuntu, Debian, Fedora etc.
    I had exactly the same problem and now I'm forced  to BUY a Linux distro in order to build PetaLinux?
    Anyway, a) are there any plans to support these tools on the more popular (free) distros? and b) Does anyone know if we can use CentOS 6, since that's supposed to be a community (free) clone of the supported (but not free) RHEL 6 distro?
    Anyone know of an 'unsuported' Linux distro that 'works' anyway (especially for the cable drivers)?
    It LOOKS as if that one cable driver install issue is the only thing preventing us from using a boat load of other distros. Can't this be fixed?
     

  • Where are WinXP 32-bit drivers to install CP1518 connected to Win7 64-bit

    I have a CP1518ni connected locally via USB to a Win7 64-bit PC. I want to print to this printer from a WinXP 32-bit PC. The printer is shared under Win7. When I try to add a printer under WinXP, is sees the shared printer and asks for the location of the driver. I've downloaded and installed various PCL6 drivers, the Universal PLC6 driver and even inserted the original CD-ROM for the printer. No matter what location I give, it says an appropriate driver is not found. I had no problem when the printer was connected to another WinXP PC, which has now been replaced by a Win7 PC. Is it that a 32-bit PC cannot use the printer when it's connected to a 64-bit PC? I've spent several hours trying to install it and it should not be this difficult. Can someone tell me where I can find the WinXP drivers for a CP1518ni?

    A little more progress on this issue: You must install the Universal PCL6 drivers on the Win7 PC, and include the WinXP PCL6 drivers there too. The printer was installed using standard Win7 drivers, which leads to the problem. Now I can install the printer as I normally would on my WinXP PC and it finds the drivers to install. Now the problem is, whenever I print to that printer on my WinXP PC, the queue either shows a print error, or, the print job continually shows it is printing, then spooling, then printing, then spooling, etc. These lines rapidly and alternately flash in the print queue window and the job never prints. I've disabled my WinXP firewall and removed user name/password credentials on the Win7 PC.

Maybe you are looking for