Latin-2 Polish installation for reference

Hello group.
We are running Latin-1 codepage ERP2004.
We want to install a Z3 correspondence language for defining sapscripts for outgoing documents in the Polish language. So, to be clear, we don't plan to convert to Unicode at this point and do not intend to install full Polish language support.
However , our developers would like to have a reference to a standard SAP system with the Polish language installed in order to have a look at the Polish translations.
I would hate to install an ERP system from scratch in Latin-2 or Unicode just for reference purposes.
Any other ideas ?
Jo

Hi Jo,
nice to hear from you )
We could provide you with a logon to our IDES systems in all languages ... if possible for you in ECC6 if necessary in ECC5 - as this would be available as well.
Regards
Volker Gueldenpfennig, consolut.gmbh
http://www.consolut.de - http://www.4soi.de - http://www.easymarketplace.de

Similar Messages

How do I create an installer for my project that allows for variable data entry like a server unc path?

Hello All,
I have a questions and a few hours of scouring the internet hasn't brought me much closer to an answer.
Here's what I want to do. I have created a visual c# wpf application. I want to have an installer that during install time will have a text box or something where I can enter a server path as a string. Basically my application needs to know where to look
for a server unc path \\server\somesharedfolder that it will be accessing primarily for its work. Secondly, how do I reference said information from within my code.
I have come across application/user scoped settings, which appears to be what I'm looking for. However I can't find a way to have the installer prompt for a value "Server Path:" __________ that I could type into during installation. So far it appears
the only way would be to edit the config.deploy file before running the installer, which isn't a big deal but you'd think there'd be an easy way to take in variables during install.
EDIT: Apparently I can't edit the config.deploy file as I get an error message about the hash not matching.
Thanks for your help!
Lance

Hello,
The forums I found confusing, didn't know the best place to put this question so I put it here.
I have found the answer over at stackoverflow and will detail here for anyone who may stumble across the same problem.
The problem is ClickOnce seemingly doesn't support this feature. Installshield LE either doesn't or does but its incredibly too complicated if all you need is one variable passed to the registry during installation. And it seems the words used for googling
this particular problem will never lead you to the solution.
So here's how to do it (we will be first adding the Visual Studio Installer Add-on to restore original installer project functionality):
1) Inside of visual studio 2013 go to Tools -> Extensions and Updates
2) On the left-hand side click on Online -> Visual Studio Gallery
3) In the upper-right search box search for "Visual Studio Installer"
4) Download the extension labeled "Microsoft Visual Studio Installer Projects"
5) Install, then open a new project under Templates -> Other Project Templates -> Visual Studio Installer -> Setup Project
6) Now for the gold. In the solution explorer there are icons in a bar just below its title bar, highlight till you see "User Interface Setup" and open it.
7) Now you can right click on Start, Progress, End etc any Category heading and hit Add Dialog.
8) From here for my purposes, I used TextBoxes A
9) Once you add it, click on it and observe its properties window. You will see Label, Property, and Value. Make a note of the property name as it will be used to store the data directly into the registry. *Note: there appears to be no way to perform data
validation using the built in textbox dialogs, users can enter whatever they want and move on.
10) Go to the registry editor on the same icon bar under solution explorer.
11) Specify your registry folder, make a new value (I used string) and name it whatever you like. In the value section enter the property label formatted as such [EDITA1] depending on your value.
12) Now when you run the installer for your project, it will take data into that field and place it into the registry provided it has access to that key with the permissions you run the program under.

Installer for Labview 8.5

Hi Labview experts..
I have tried to make an installer for use in a computer without labview..
It includes DSC Historical trend with reference to a database..
In the dialog box for “additional installer” I use “Enhanced DSC Employment support” and
And “Labview Run-Time Engine”
I have this error when I try to run it on a computer that don’t have Labview installed..
-1967362015
HIST_GetHistTagListCORE.vi, IAK_SHARED: (Hex 0x8ABC7021) Failed to load library.
Is there anybody that can help me, and give me some ideas??
Thanks
Very best regards Benjii

Hi Benji
Take a look at the following thread:
http://forums.ni.com/ni/board/message?board.id=170&message.id=313108&requireLogin=False
I think it will explain why you are having problems.
Regards
Øyvind
Message Edited by Øyvind Ø on 07-07-2008 01:58 AM

Where do I find the installer for AAMEE 3.0 for the Creative Cloud?

I try to setup a local Adobe Update Server. I've seen the video online on Adobe TV, but I don't find the actual installer file called AAMEE 3.0...

Hi wieneke,
You can find the installer for AAMEE3.0 at : http://blogs.adobe.com/oobe/2012/05/aamee-3-0-for-cs6-available-now-removes-puffer-fishes. html
The link is : http://download.macromedia.com/pub/developer/creativesuite/AAMEE/win/ApplicationManagerEnt erprise_3_0_all.exe
Regards,
Rave

I am using the Order Analysis Toolkit and want to get more information about the compensation for "Reference Signal Processing", which is scarce in the manuals, the website and the examples installed with the toolkit.

I am using the Order Analysis Toolkit and want to get more information about the compensation for "Reference Signal Processing", which is scarce in the manuals, the website and the examples installed with the toolkit.
In particular, I am analyzing the example "Even Angle Reference Signal Processing (Digital Tacho, DAQmx).vi", whose documentation I am reproducing in the following:
DESCRIPTIONS:
This VI demonstrates how to extract even angle reference signals and remove the slow-roll errors. It uses DAQmx VIs to acquire sound or vibration signals and a digital tachometer signal. This VI includes a two-step process: acquire data at low rotational speed to extract even angle reference; use the even angle reference to remove the errors in the vibration signal acquired at normal operation.
INSTRUCTIONS:
1. Run the VI.
2. On the DAQ Configurations tab, specify the sample rate, samples per channel, device and channel configurations, and tachometer channel information.
NOTE: You need to use DSA PXI-447x/PXI-446x and PXI TIO device in a PXI chassis to run this example. The DSA device must be in slot 2 of the PXI chassis.
3. Switch to Extract Even Angle Reference tab. Specify the number of samples to acquire and the # of revs in reference which determines the number of samples in even angle reference. Click Start to take a one-shot data acquisition of the vibration and tachometer signals. After the acquisition, you can see the extracted even angle references in Even Angle Reference.
4. Switch to the Remove Slow-roll Errors tab. Click Start to acquire data continuously and view the compensate results. Click Stop in this tab to stop the acquisition.
ORDER ANALYSIS VIs USED IN THIS EXAMPLE:
1. SVL Scale Voltage to EU.vi
2. OAT Digital Tacho Process.vi
3. OAT Get Even Angle Reference.vi
4. OAT Convert to Even Angle Signal.vi
5. OAT Compensate Even Angle Signal.vi
My question is: How is the synchronization produced at the time of the compensation ? How is it possible to eliminate the errors in a synchronized fashion with respect to the surface of the shaft bearing in mind that I am acquired data at a low rotation speed in order to get the "even angle reference" and then I use it to remove the errors in the vibration signal acquired at normal operation. In this application both operations are made in different acquisitions, therefore the reference of the correction signal is lost. Is it simply compensated without synchronizing ?
Our application is based on FPGA and we need to clarity those aspects before implementing the procedure.
Solved!
Go to Solution.

Hi CracKatoA.
Take a look at the link bellow:
http://forums.ni.com/ni/board/message?board.id=170&message.id=255126&requireLogin=False
Regards,
Filipe Silva

Error in Plugin Installation For MS Office 2013 on Windows 8 and 8.1

Hello,
We have developed an installer for MS Word and MS Excel plugins. So far it has been working fine for MS Office 2003, 2007 etc. but since I have upgraded to a Windows 8.1 machine with MS Office 2013 installed, the plugin installation is giving error.
The installation fails and an error dialog appears with Error Code Type: Error, Error:1, Owner:30a.
The installer works well for MS Office 2010 on Windows 8/ 8.1 machine or MS Office 2010 on Windows 7 machine.

HiDinesh,
Is there any other error message when installation fails?
According to this error message “Error Code Type: Error, Error:1, Owner:30a.”
This is problem conclusion provided by IBM:
This issue is no longer reproducible in V6R2012x.
Installation checks have been modified to throw an error only when none of the Office applications
(Word, Excel, PowerPoint and Outlook) are installed. This error will not occur if one or more of the Office products are installed.
For more detail information:
http://www-01.ibm.com/support/docview.wss?uid=swg1HE09464
Please Note: Since the web site is not hosted by Microsoft, the link may change without notice. Microsoft does not guarantee the accuracy of this information.
If there is anything I can do for you regarding this issue, feel free to post back.
Best regards,
Greta Ge
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.

Item is not available for reference to Excise Invoice, Deselect Item OK!

Hai,
I am doing a Sub contracting scenario, in which the excise is applicable to main material, i have maintained condition records, captured excise But while doing GRN i am getting Item is not available for reference to Excise Invoice, Deselect Item OK!
Message no. 4F279
above errror
Plz solve my problem

Whether you tested case in development server ???
Are you sure SAP Note applies to our version & support package level ?

Is there any way to create an installer for Mac OS and Linux OS once a stand alone application is created?

Is there any way to create an installer for Mac OS and Linux OS once a stand alone application is created? I have created an executable application that I want to distribute to Mac and Linux users (different applications were created in the respective OS). I was wondering if there is any way to create an installer? I think there probably isn't... If the user were to simply download the Labview Run-time Engine from ni.com would they be able to run the application or is it more complicated than that?
Thanks so much for your time.

I think Shane tried to say, that it is on the Mac OS X installation DVD, NOT the LabVIEW for Mac OS X installation medium. And that could very well have changed in recent Mac OS X versions as well. They used to have Xcode on it too, but that seems gone as well.
Rolf Kalbermatter
CIT Engineering Netherlands
a division of Test & Measurement Solutions

You do not have sufficient privileges to complete this installation for all users of the machine. Log on as administrator and then retry this installation

Hi all
Have seen a couple threads regarding this but unfortunately nothing that solves my problem thus far!
Right now, our developers are using the Domain Admin account to promote their website code using MSI files. I'd like to change this as I feel the Domain Admin account should be on lock down and only used when absolutely necessary, pretty common. The
same goes for my account too, I would like to absolve as much use of the Domain Admin as I can.
Problem is, when they run installers from their own accounts, they receive this error: You do not have sufficient privileges
to complete this installation for all users of the machine. Log on as administrator and then retry this installation
The accounts they are using are part of the Built In Administrators group and the Domain Admins group... I'm not sure what other permission you'd need in a domain? We've gone as far as explicitly giving them local admin access on this server and still
nothing changes.
Is there a Group Policy or something that I can change to provide install rights and possibly remove these accounts as Domain Admin and more along the line of Power User?
Thanks much for your help!
Ryan

Hi,
You could use Software Restriction Policies (SRP’s) or Applocker(supported on Windows server 2008 R2/Windows 7 only) to restrict the running
of the application for specific user.
Description of the Software Restriction Policies
http://support.microsoft.com/kb/310791
HOW TO: Restrict Users from Running Specific Windows Programs
http://support.microsoft.com/kb/323525
How to Implement Group Policy Security Filtering
http://www.windowsnetworking.com/articles_tutorials/Group-Policy-Security-Filtering.htmlPlease remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

11.2.0.2 Grid Installation for a Standalone Server FAILED!

OS: OEL-5.5 x86_64 (kernel-2.6.18-194.17.4.0.1.el5, glibc-2.5-49.el5_5.7)
Product: Oracle 11gR2 (11.2.0.2.0) x86_64 for Linux
Hi,
I was trying to perform a clean and full 11.2.0.2 installation for a Standalone Server (Single database + ASM + Restart), but unlike 11.2.0.1, this standalone patch, shipped as set of full installation files, has serious flaws mainly due to insane installation and configuration scripts. My environment is as follows:
ORACLE_BASE=/opt/oracle
ORACLE_HOME=/opt/oracle/product/11.2.0/db_1
GRID_HOME=/opt/oracle/product/11.2.0/grid
all owned by oracle:dba. ASMLib was configured with four 256 GB partitions on four physical disks.
1. During grid installation the Prepare, Copy files, Link binaries, Setup files, Execute Root Scripts (root.sh), Update Inventory, Oracle Net Configuration Assistant all succeeded, but ASM Configuration Assistant FAILED and installation couldn't continue. That was because root.sh script (and inside it calling scripts) changed the ownership of ORACLE_BASE and GRID_HOME to root:dba, so that admin and diag directories creations in ORACLE_BASE were not permitted. After fixing that manually as root (immediately after executing root.sh), the installation continues and succeeds.
2. During installation of Client software the error message window appears stating that cannot find the /opt/oracle/product/11.2.0/db_1/oui/bin/runInstaller.var file. By pressing the Continue button the installation continues ignoring this.
3. If Oracle Scheduler Agent is selected for installation during Client software installation, the Oracle Enterprise Manager 11g Database Control Release 11.2.0.2.0 cannot start (https problem - cannot establish connection). To fix this, I had to deinstall Client software and install it again without Oracle Scheduler Agent.
4. The Performance window in Enterprise Manager 11g Database Control Release 11.2.0.2.0 cannot display any graph ("Initializing" and "Transferring data from localhost..." never end).
Are those issues known issues? If they are, why did Oracle ship that standalone patch without testing it before? Given that prior release (11.2.0.1) was free of any errors above, it is really beyond me to figure out this negligence.
NJ

Are those issues known issues? Have you created service request ? That would be much better to be sure about the workaround you found.
Nicolas.

Problem using Toshiba Software Installer for Win 7 on Satellite L750-1MT

Hello!
I have problem using Toshiba Software Installer for Win 7 on Satellite L750-1MT (PSK30E-02T002B3) with no OS preinstalled.
I do the following:
1. Install Windows 7 x64, SP1.
2. Install LAN driver (device was not recognized by Windows 6) (downloaded from [http://se.computers.toshiba-europe.com/innovation/jsp/supportMyProduct.do?service=SE&LNG=26&userAction=S MP_RESULTS_PAGE&partNumber=PSK30E-02T002B3&serialNumber=&USER_ACTION=Serial%20number])
3. Install all Windows Updates from Microsoft
4. Run Toshiba Software Installer for Win 7 - it installs a couple of drivers and then asks to reboot.
Here is the log file for the first try (win7update.log):
Update started 12\28\2011 at 21:11
Installed TVALZ_O.INF
Installed IO & Memory Access Driver
driver_bluetooth_TC00241200A.exe /s /log /test has been installed with the result code of PASS
util_tvap_TC00215000H.exe /s /log /test /wait15 has been installed with the result code of PASS
Update completed at 21:29
After reboot I run it again and the result is:
Update started 12\28\2011 at 21:38
Toshiba Bluetooth stack has already been installed.
Toshiba Value Added Package has already been installed.
Update completed at 21:40
Any help is appreciated!
Thanks in advance!

You are right this notebook model was delivered without OS.
Win7 64bit is supported for this notebook model and all necessary drivers, tools and utilities are available on Toshiba download page.
What I can say is that all this stuff must be installed in right install order. I know it sounds stupid now but I recommend you to make clean OS again and continue installation following this installation order:
Win7 SP1
Intel Chipset SW Installation Utility 9.2.0.1015
TOSHIBA Supervisor Password Utility 4.8.6.0
TOSHIBA HW Setup Utility 4.8.6.0
TOSHIBA Bulletin Board V2.1.10
TOSHIBA ReelTime 1.7.17.0
Intel Management Engine Interface 7.0.2.1164
NVIDIA Display Driver 8.17.12.6669
Intel Rapid Storage Technology Driver 10.1.2.1004
TOSHIBA Value Added Package 1.5.4.64
USB3.0 Driver 2.0.32.0
NVIDIA HD Audio Driver 1.1.13.1
Conexant Audio Driver 8.51.1.0a
Intel Wireless LAN Driver 14.0.2.2.1.s64_wCAT
or
Atheros Wireless LAN Driver 9.2.0.206.0.s3264_wCAT
or
Realtek Wireless LAN Driver 2.00.0013
TOSHIBA Wireless LAN Indicator 1.0.3
Synaptics Touch Pad Driver 15.2.11.1
TOSHIBA Software Modem 2.2.97(SM2297ALS05)
Conexant Modem Driver 7.80.4.53
TOSHIBA HDD Protection 2.2.1.12
Atheros Bluetooth Filter Driver Package v1.0.7
Bluetooth Stack for Windows by Toshiba v8.00.04(T)
Atheros LAN Driver 1.0.0.46
Realtek Card Reader 1.0.0.12
TOSHIBA Sleep Utility 1.4.2.7
TOSHIBA Face Recognition V3.1.8
TOSHIBA eco Utility 1.2.25.64
Intel Proset 14.0.2.0.1.s64_wCAT
Intel Wireless Display 2.0.29T
TOSHIBA HDD_SSD Alert 3.1.64.7
TOSHIBA Service Station V2.1.52
TOSHIBA PC Health Monitor 1.7.4.64
ConfigFree 8.0.37
TOSHIBA Web Camera Application V2.0.0.19
TOSHIBA Network Device ID Registry Setting Tool 3.0.32.4-14_wMSI
TOSHIBA Media Controller 1.0.86.2
TOSHIBA Media Controller Plug-in 1.0.6.1
PatchFiles$$2 PCIIDEREG-1.2
PatchFiles$$3 TosVolRegulator_x64_1.1
It is very important to use right installation order.
Please post some feedback.

My installation for Photoshop Elements 12 Failed. I have Windows Vista. I get an error message stating:installer failed to initialze. Please help!!

My installation for Photoshop Elements 12 Failed. I have Windows Vista. I get an error message stating:installer failed to initialize. Please help!!

Error "Installer Failed to Initialize" | Install desktop application | Windows

How can I create an installer for my project that can work on 32-bit Windows if I have 64-bit Windows Vista?

Hi,
I made a LabVIEW project that works perfectly and made an installer for it. I tested the installer on my own computer and everything worked well. The goal for my installer was to put it on multiple computers. So I tried to do this on another computer that has Vista 32-bit and it told me that the installer can only run on 64-bit computers. I tried to choose to install run-time 32bit and it did not change anything, there was still a message to tell me that this installer only can be ran on 64-bit computers. How can I make an installer that works on 32-bit computers?
Thank you.
Solved!
Go to Solution.

Langelier wrote:
Will my project work on 32-bit version even if created on 64-bit version?
The code will have to recompile, but yes it should work. I recommend making a backup before proceeding just in case.
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines

Can you download a 32 bit installer for photoshop elements 12 to install on a 64 bit system (windows 7)

can you download a 32 bit installer for Photoshop elements 12 to install on a 64 bit system (windows 7). Thanks in advance

yes, if you follow all 7 steps you can directly download a trial here: Adobe Photoshop Elements 12 Direct Download Links, Premiere too | ProDesignTools
and activate with your serial number.
if you have a problem starting the download, you didn't follow all 7 steps, or your browser does not accept cookies.
the most common problem is caused by failing to meticulously follow steps 1,2 and/or 3 (which adds a cookie to your system enabling you to download the correct version from adobe.com).
failure to obtain that cookie results in an error page being displayed after clicking a link on prodesigntools.com or initiates the download of an incorrect (eg, current) version.

Should I use time machine, CCC or a bootable installer for OS X Yosemite

I am about to change my mid-2010 MBP and install a Samsung 850 pro. I have Yosemite (by the way: Yosemite performance is good, no slowness; hdd filled only 50%) - I have VPN Tracker and Microsoft Remote Desktop as main applications at the moment. I will also use it for itunes.
I have made a backup on time machine.
The process instructions on the net vary:
1) After replacing the HDD with the SSD, press down Command + R, this opens boot utility of Yosemite; then with disk utility format the SSD as MacOs ext journal. then: Back-up from time machine.
2) OR: Use Carbon Copy Cloner. Connect the SSD on a USB tray (I have one) and commence from there before installing. On re
3) OR: Should I first - Create a bootable installer for OS X Yosemite; the instruction says: Download the OS X Installer app from the Mac App Store. But I can't find it. And then clone as Kappy describes.
- Isn't that replaced by the Command + R startup procedure?
& I am looking for insight in this tip:
4) I read someone failed in installing an SSD because he forgot an I/F sensor connection (Temperature gauge??) ; but I see such a connector nowhere in the video's.
Of course I prefer 1), looks most straightforward as being within the Apple software mindset.
anything will help me.

First I would explore the potential problems you may face installing a third party SSD in a MBA running Yosemite. Just a sample:
http://www.zdnet.com/article/os-x-yosemite-and-third-party-ssds-heres-what-you-n eed-to-know/
The simplest way of installing a new storage device is to connect it to the MBP via USB and then format it Mac OS Extended (Journaled) in Disk Utility>Erase.
Then use CCC or Disk Utility>Restore to copy the data to the SSD from the internal HDD.
Then test to see if the external SSD will boot the MBP. If so, make the physical swap.
Ciao.

Latin-2 Polish installation for reference

Similar Messages

Maybe you are looking for