Latitude and longitude co-ordinates not appearing correctly

I am trying to allocate a 'place' to a photograph by inputting the latitude and longitude. The place is 'The Needles" at the extreme western point of the Isle of Wight, the co-ordinates being 50.3973N and 01.3552W. However, when I enter these co-ordinates in the format as indicated in the 'help' section of iphoto (i.e. 50.3973, 01.3552), the place comes up somewhere off the coast of France in the English Channel! Can anyone please advise me if I am not entering the numbers correctly or is there a problem with iphoto?

When I show extended photo info on a photo that is correctly positioned it displays as
GPS Latitude l.llllll˚ N
GPS longitude n.nnnnn˚ W
Have you tried with a space between the digits and the N or W?
Also you might try experimenting with adding a minus sign to one or the other of the fields although that does not sound correct off the top of my head
If you have a photo that is correctly located there you can use HoudahGeo - http://www.houdah.com/houdahGeo/ - to locate the rest of the photos from the correct photo's location - this is a very useful function to take lots of photos with a non GPS camera and take one with your iPhone and use its location for the others
LN

Similar Messages

IPhoto '09 - Adding your own latitude and longitude

It appears that iPhoto 09 does not allow you to add your own Geo location (e.g.: latitude and longitude data). Is this correct?
Are we limited to the list Apple provides?

I downloaded a Exif viewer app to double check to, and it was there the 2nd time I exported and ticked locations, and text and keywords.
I also just downloaded Picasa for MAC, and it doesnt support direct looking at Google Earth on the Mac yet, but the L/L is there in the pic data, but the keywords are not shown, in picasa
So is this the only way to get it out then?
can you make a new album with all your pics in, and then export all at once?
Or can I take it that if I pick the picture direct from the iPhoto library in Finder and copy it , it will have the L/L and keyword data in?
cheers

Getting Power View on Sharepoint to interpret latitude and longitude correctly

After pulling my hair for a few dozen hours I come here with a simple question.
I have a SQL Server 2012 View - joining 3 different tables, one of which contains latitude and longitude in Decimal(9,6) format.
I have a Tabular model using this view which I push to Analysis services and further on to Sharepoint 2013.
However, when I pull the longitude and latitude columns to the corresponding fields in Power View, the data is just placed standardly in the Artic Sea. Now I have tried changing to and from commas and periods as decimal separator but nothing seems to work.
I can get it to work using Power Map and Power View for Excel 2013 but not on Sharepoint.
I have spent a great deal of time on Google searching for answers but nothing seems to adress this issue, despite it being asked before

I too have been frustrated by this behavior. I also have issues with locations in Puerto Rico showing up in Europe using the zip code and/or state. I've found when I use lat/long things look correct which makes resolving this
issue even more pressing for me.
Unfortunately in the SharePoint construct you cannot control how the api interrupts the address like you can in Excel. I think that is why models in excel recognize latitude and longitude without issue but in SharePoint it's a no go. I have
not tried to see if the tabular construct recognizes lat/long.

Custom Map using latitude and longitude data points

Hi,
I am new to Apex and I want to lost custom data points using latitude and longitude data points. I
have seen posts referring to the chart example (http://apex.oracle.com/pls/apex/f?p=36648:65:2214483882702::NO:::) ; could someone help me with the following:
1) How to add On Demand Application Process to a map page (step 4 in the demo)
2) What is a hidden item and how to add it to a page (step 6)
Any help would be greatly appreciated.
Kind regards,
Lisa

I am trying to do the same thing. I have got the get_data function working to create the desired output. However when I replace the xml <data> block with &P65_DATA, it does not work. If I display P65_DATA on the page, it has correct output. If I cut and paste the output into custom XML, it works fine. Anyone have come across this issue..any ideas how to fix it?

Calculate distance between Latitude and Longitude

Hi All,
I have one Latitude and Longitude points. I need to calculate distance between them.
Right now we are using HAVERSINE formula but the query takes longer time to complete.
Reference: http://www.movable-type.co.uk/scripts/latlong.html
Please assist on this.
Thanks in advance.

Check this link...
http://www.mrexcel.com/forum/excel-questions/202255-calculating-distance-between-two-latitude-longitude-points.html
I never did this before, but gave it a try using the formula mentioned in that link..
Data:
                   Lat                      Long                               R = 6,371 (Radius of earth (approximated))
Origin:        44.844263(B2)      -92.914803(C2)
Destination: 44.822075(B3)     -92.912498(C3)
Formula used:
A: =SIN(ABS(B3-B2)*PI()/180/2)^2+COS(B2*PI()/180)*COS(B3*PI()/180)*SIN(ABS(C3-C2)*PI()/180/2)^2
B: =2*ATAN2(SQRT(1-A),SQRT(A))
C: =R*B                  ---> DISTANCE!!!!
WITH t AS
        (SELECT POWER (
                   SIN (ABS (44.822075 - 44.844263) * ( (22 / 7) / 180 / 2)),
                   2)
                + COS (44.844263 * ( (22 / 7) / 180))
                  * COS (44.822075 * ( (22 / 7) / 180))
                  * POWER (
                       SIN (
                          ABS (-92.912498 - (-92.914803))
                          * ( (22 / 7) / 180 / 2)),
                       2)
                   E2
           FROM DUAL)
SELECT (2 * ATAN2 (SQRT ( (1 - E2)), SQRT (E2))) * 6371
FROM t;
Check if this gives correct values... (I did not verify this properly.. ) And this is faster in my opinion..
Please post your code for better suggestions from volunteers...
Cheers,
Manik.

XMP metadata: latitude and longitude

I have tried to pull in latitude/longitude data on a photo. Most of the XMP fields are not populated. I am wondering if the XML is correct within FCS... It could be my issue though. I used my iPhone to test. iPhoto is able to read the coordinates as well as photoshop. Why can't FCS pull this information in?
This is going to be a very important function for us in the very near future. Any help would be greatly appreciated. Thanks!

So if I'm right, the Latitude and Longitude from the photo you posted maps to location in South Florida.
The XMP EXIF GPS Dynamic metadata values are completely wrong in FCSvr. The timestamp is set to 12/31/69 for some reason, but inspecting the file via the mdls command in the terminal
i.e.
mdls iphonephotogps.jpg
Reveals the following Latitude and Longitude values.
kMDItemLatitude = 28.59650039672852
kMDItemLongitude = -81.36000061035156
If this is correct, then you could write a script that could slurp the Spotlight Metadata from the file and inject it into FCSvr.
I have a script that does something very similar for extracting audio files. I wrote this for a client, so I can't open source it, but if you contact me offline, I may be able to customize it for your needs and point you in the correct direction development wise.
Nicholas Stokes
XPlatform Consulting
email: [email protected]

Plotting Latitude and Longitude in Screen

Hi ,
Iam trying to implement applet application reads Latitude and Longitude from database and plots in the screen.
For this i converted Latitude and Longitude To Screen X and Y.
Some how when draw its always out of window.
Is there a way by which we can do it only using java.
Please guide
Thanks,
arvin

aravind123 wrote:
Thanks for the suggestion,
The objective is i want to plot a route (set of lat lon ) using applet.
Below is the code used for that,
double newLon= (180 + Lon );
double screenX = newLon* (screenHeight / 360);
double newLat= (90 + Lat );
double screenY = newLat* (screenWidth / 180);Lat and Lon in degrees.
Iam i doing correctly?
Please help,It's going to be upside down for a start, since Y position is measured downward from the top of the screen.
It can be complex issue, though, plotting coordinates which refer to positions on a round planet on a flat screen. The transformations are called geographical projections and there about a half dozen kinds in common usage with names like "Transverse Mercator" and "Albers Equal Area". Different projections suit different maps. For example maps of North America typically use Albers Equal Area (because it works best with areas with more East to West than North to South, but maps of Britain, a North to South country, almost always use Transverse Mercator.
However maps of the whole world typically use on of the the Mercator projection, which is essentially plotting latitude and longitude directly (or you can use the sin of the latitude, which gives a slightly more realistic impression of areas). However you would still need to think about the relationship between horizontal and vertical scale, if makes quite a difference to the appearance of the map. The Mercator is mathematically simple, but often very misleading.

IPhoto latitude and longitude

Has anyone had problems when entering latitude and longitude manually in iPhoto? I just put in the location of some pictures taken in the Alps and the little map in the bottom right corner put my lat/long somewhere over in the Loire valley, half the width of France away. On Google Maps in Safari my Lat/long identifies the correct location.
As the iPhoto help pages say, you can drag the pointer to the correct location, but only in the tiny box, it does not work if you go to full screen. What a pain that was!

using Lat/long is easy as described in this article - http://support.apple.com/kb/PH2381
You also can use the paste location command if you have another photo in the place you want - copy that photo, select the remaining photos at tha location and paste location
Graphic converter is an option
HouDahGeo is another option that can safely deal directly with the iPhtoo library - http://houdah.com/houdahGeo/
LN

Website suddenly not appearing correctly in Firefox under Windows 7

I've had a website running for a couple of years now with no problems, but one of my clients sent me an email saying it's not appearing correctly on her system, Windows 7 runnning Firefox v. 15. I am on a MAC and have looked at the site on 4 different browsers and it looks fine, I also installed Firefox (v. 16) on a PC running Windows 7 and it looks fine there. Near as I recall I haven't made any changes to the site's structure, so I'm stumped. The website is http://www.horizonwings.org. Can anyone help? I've attached a couple of screen captures showing what she sees. Thank you.

I see the same problem as your client in Firefox 16 on Windows 7. To fix the problem, add clear: left to the style for leftColMain
#leftColMain {
    clear: left;     float: left;
    padding: 30px 0 0;
    position: relative;
    width: 210px;

Navigation Drop Down Menu Does Not Appear Correctly with Internet Explorer.

Website was designed with Dreamweaver CS5 on a Mac. The navigation drop down menu does not appear correctly with Internet Explorer. When you mouse over a navigation option that has a drop-down menu, the drop-down portion appears on top of the first level. Hope someone can help me out.Thanks!
http://www.catchaghosttoursofkansas.com

Hi,
and you should then iron out this minor inaccuracy, which I found in your source code, for example here:
<div align="center"><a class="MenuBarItemSubmenu" href="hays.html">HAYS</a>
        <ul>
          <li><a href="hayswalkingtour.html">Walking Tour</a> </li>
          <li><a href="forthays.html">Fort Hays</a></li>
        </ul>
All your "first" entries have to show a '#", like this:
      <div align="center"><a class="MenuBarItemSubmenu" href="#">HAYS</a>
        <ul>
          <li><a href="hayswalkingtour.html">Walking Tour</a> </li>
          <li><a href="forthays.html">Fort Hays</a></li>
        </ul>
      </div>
after that you can link to the individual subgroups. See here e.g. (screenshots from my German DW):
Hans-G.

Buttons do not appear correctly in Firefox

My company uses IE 7 as their standard browser within the company. I am developing an extranet application so that the public can access my company's information. Since APEX supports both IE and Firefox, the application needs to appear the same in both versions. Everything looks fine except for the buttons.The buttons in my applications appears correctly in IE 7 but it does not appear correctly in Firefox 3.5.5.
You can access my application via the following link:
https://miniprofile.panynj.gov/pls/apexcfp8/f?p=120:1
Can someone assists please. I will forward you the customized CSS and templates that the application references via e-mail, if needed.
Thanks in advance,
Robert

Hi Robert,
According to FireBug, the following style in the PA_t15WL class is causing the problem:
background-position:0 50%;If you remove this, the button displays ok in FireFox - not sure what effect it has on IE7, though
Andy

Help with indesign epub not appearing correctly on ipad

Can someone please tell me why my epub does not appear correctly when viewed on my ipad? It seems to push like a quarter of my full page image onto the next page. I don't want it to do this! I want it to looks like it does in ibooks on my mac.
See the links to below images that show how it looks on indesign, ibooks and ipad.
https://www.flickr.com/photos/118558552@N02/15536244571"
"https://www.flickr.com/photos/118558552@N02/15352308439"
https://www.flickr.com/photos/118558552@N02/15538941145"
Thankyou for looking, and I hope someone can answer!

Check this thread regarding the same issue and see if some of the suggestions there help you: IMAGES cut off when converting to epub

Horizontal Spry Submenu does not appear correctly in IE

I am building a site in Dreamweaver CS5 and my spry submenus do not appear correctly in IE.   I work on a mac, but have been checking my work on a pc.   I have tried looking through other posts and have made some corrections (I at least got the submenus to appear vertically instead of laterallly in IE) but still have two problems:
   * The submenus are shifted to the right rather than aligning under the menu headings
   * One one menu (Attorneys) the submenus appear above, rather than below, the menu heading
Here is the website and I am really hoping someone can help! I've spent several hours trying to figure this out with no luck.
http://webdesign.protas.org/olg/English/olg%20eng.html

1. Especially IE takes offence to the DOCTYPE declaration not being on the first line
2. There is no end tag for the HEAD section
3. Your use of the Library Item for the menubar is not correct
Please have a look here http://validator.w3.org/check?verbose=1&uri=http%3A%2F%2Fwebdesign.protas.org%2Folg%2FEngl ish%2Folg%2520eng.html
Gramps

Websites do not appear correctly.

After about a few hours of being on the internet (continuously or not), web pages will start to not appear correctly. The only way I have found to fix this is to clear the history. (Cookies, cache, etc.) This is only a temporary fix though and I would like to not have to do this every few hours when I'm in the middle of something. I haven't been able to find anything else on this at all besides the temp. fix of clearing the cache.

If you use extensions (Firefox/Tools > Add-ons > Extensions) that can block content (e.g. Adblock Plus, NoScript, Flash Block, Ghostery) then make sure that such extensions aren't blocking content.
You can try basic steps like these in case of issues with web pages:
Reload web page(s) and bypass the cache to refresh possibly outdated or corrupted files.
*Hold down the Shift key and left-click the Reload button
*Press "Ctrl + F5" or press "Ctrl + Shift + R" (Windows,Linux)
*Press "Command + Shift + R" (Mac)
Clear the cache and cookies only from websites that cause problems.
"Clear the Cache":
*Firefox/Tools > Options > Advanced > Network > Cached Web Content: "Clear Now"
"Remove Cookies" from sites causing problems:
*Firefox/Tools > Options > Privacy > Cookies: "Show Cookies"
Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Firefox/Tools > Add-ons > Appearance).
*Do NOT click the Reset button on the Safe Mode start window.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

Recent iOS update has made my iPad 2 unusable. The screen locks up. It's very laggy and web pages do not load correctly. Is there a fix for this or are they even working on a fix.

Recent iOS update has made my iPad 2 unusable. The screen locks up. It's very laggy and web pages do not load correctly. Is there a fix for this or are they even working on a fix.

Try some basic troubleshooting:
(A) Try reset iPad
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
(B) Try reset all settings
Settings>General>Reset>Reset All Settings
(C) Setup as new (data will be lost if you do not have backup)
Settings>General>Reset>Erase all content and settings

Latitude and longitude co-ordinates not appearing correctly

Similar Messages

Maybe you are looking for