Lauching webdynpro java application

hi gurus
our scenario is like this..
when employee fills the educational assistance form (customized webdynpro java application) and clicks on the submit button , it should go for approval..while manager opens the workitem it should lauch the same WD form in display mode with approve and reject button. and when he approves ..it should update the data base & it should sends a intimation mail to the employee that his application has been approved...
MY QUESTIONS :
1) how to trigger a event from WD java application to start this workflow ...
2) how the values can be passed from WD application container to workflow container .i got some ideas by reading some forums for this i want to use SAP_WAPI_READ_CONTAINER , where i want to use this function module
3) it is better to use the user decision step for the approval process ? . if i am using this then i want to send the form as a attachment in user decision step, how it can be achieved ?
4)what all r the other settings i want to maintain .

3) it is better to use the user decision step for the approval process ? . if i am using this then i want to send the form as a attachment in user decision step, how it can be achieved ?
I would definitely prefer to open a form with "Approve" and "Reject" buttons instead of having it as an attachment in a user decision step. Especially if it is a application where a user never approves without opening the attachment. For example i may not prefer to approve a leave requisition without viewing it! In that case it will just be an overhead for the user to open the form manually everytime before approving. So make a decision on this based on the use of your application.
Moreover it is not that tough either (atleast from a workflow perspective) to launch the webdynpro from UWL. Create a custom task and create appropriate entries in transaction SWFVISU (hope you are on or above ECC 5.0) to link your task and WD application. Thats it your application should be ready and shud be launched from UWL.
But definitely in a custom application your webdynpro developers need to do a lot of work (as we did one in our previous projects) irrespective of whether it is launched directly as a task or as an attachment.
Performacewise providing "Approve" and "Reject" will just increase one RFC call from your application (to complete your workitem).
Thanks,
Prasath N

Similar Messages

Problem while deploying a webdynpro java application in NWDS 7.1 version

HI All,
        I got the below error when i deploying the webdynpro java application in NWDS 7.1 version..help me out...........................................
Exception:
com.sap.ide.eclipse.deployer.api.APIException: ConnectionException,cause=[Ecc]
NameNotFoundException.The SAP J2EE ENGINE service 'tcbldeploy_controller' is not available
because of deployment or down engine( service ).
Reason: Object not found in lookup of
tcbldeploy_controller.
     at
com.sap.ide.eclipse.deployer.dc.ComponentManagerImpl.getDeployProcessor(ComponentManagerImpl
.java:64)
     at com.sap.ide.eclipse.sdm.threading.DCDeployThread.run(DCDeployThread.java:118)
Caused by: com.sap.engine.services.dc.api.ConnectionException: [ERROR CODE DPL.DCAPI.1118]
NameNotFoundException.The SAP J2EE ENGINE service 'tcbldeploy_controller' is not available
because of deployment or down engine( service ).
Reason: Object not found in lookup of
tcbldeploy_controller.
     at
com.sap.engine.services.dc.api.session.impl.SessionImpl.createCM(SessionImpl.java:320)
     at
com.sap.engine.services.dc.api.deploy.impl.DeployProcessorImpl.<init>(DeployProcessorImpl.ja
va:136)
     at
com.sap.engine.services.dc.api.deploy.impl.DeployProcessorFactoryImpl.createDeployProcessor(
DeployProcessorFactoryImpl.java:26)
     at
com.sap.engine.services.dc.api.impl.ComponentManagerImpl.getDeployProcessor(ComponentManager
Impl.java:46)
     at
com.sap.ide.eclipse.deployer.dc.ComponentManagerImpl.getDeployProcessor(ComponentManagerImpl
.java:58)
     ... 1 more
Caused by: com.sap.engine.services.jndi.persistent.exceptions.NameNotFoundException: Object
not found in lookup of tcbldeploy_controller.
     at
com.sap.engine.services.jndi.implserver.ServerContextImpl.lookup(ServerContextImpl.java:649)
     at
com.sap.engine.services.jndi.implserver.ServerContextRedirectableImpl.lookup(ServerContextRe
directableImpl.java:80)
     at
com.sap.engine.services.jndi.implserver.ServerContextImplp4_Skel.dispatch(ServerContextImplp
4_Skel.java:555)
     at com.sap.engine.services.rmi_p4.DispatchImpl._runInternal(DispatchImpl.java:319)
     at com.sap.engine.services.rmi_p4.DispatchImpl._run(DispatchImpl.java:200)
     at
com.sap.engine.services.rmi_p4.server.P4SessionProcessor.request(P4SessionProcessor.java:136
     at
com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.pro
cess(ApplicationSessionMessageListener.java:33)
     at
com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
     at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
     at java.security.AccessController.doPrivileged(Native Method)
     at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:102)
     at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:172)

First check is Java stack is running ?
make sure J2EE_ADMIN user not locked.
Ans please check password in secure area. check password in secure store should be correct.
may be you can try with restart of SAP and DB.
All the best
regards
nag

When deploying the webdynpro java application , showing error message

Hi Masters,
when deploying the webdynpro java application , showing error message. Please reply why this problem showing and what is the solution
But Iogin to sdm tool ( remote gui .sh) with same password, which password i am using for deploy the webdynpro java application.here in sdm tool i am able to login. and i restart the sdm , and again trying to deploy the same problem it showing.
URL to deploy : file:/C:/DOCUME1/ppuser/LOCALS1/Temp/temp30925rupa.com~sales.ear
Result
=> deployment aborted : file:/C:/DOCUME1/ppuser/LOCALS1/Temp/temp30925rupa.com~sales.ear
Aborted: development component 'sales'/'rupa.com'/'LOKAL'/'0.2010.02.13.14.32.39':Caught exception during application deployment from SAP J2EE Engine's deploy API:com.sap.engine.deploy.manager.DeployManagerException: ERROR: Cannot connect to Host: [devsap] with user name: [J2EE_ADMIN] Check your login information. Exception is: com.sap.engine.services.jndi.persistent.exceptions.NamingException: Exception while trying to get InitialContext. [Root exception is com.sap.engine.services.security.exceptions.BaseLoginException: No login module succeeded.] (message ID: com.sap.sdm.serverext.servertype.inqmy.extern.EngineApplOnlineDeployerImpl.performAction(DeploymentActionTypes).DMEXC)
Deployment exception : The deployment of at least one item aborted
Edited by: sujana mullapudi on Feb 13, 2010 2:52 PM

Hi Sujana,
For deploying Web Dynpro for Java application, J2EE_admin correct password must be stored in the scured area of config tool.
Your error show that J2EE_admin information is not correct.
So, Please ask your basis team to update new J2EE_ADMIN password or you can do it in scured area of config tool.
Hope this will helps you.
Thanks
Arun Jaiswal

How to track session in Webdynpro Java application

Hi All,
How to get the session reference of any Webdynpro Java Application . My purpose is that thr is one WD application is getting launched , now if suppose user didn't perform any action on it and session for that application got expired . After the session got expired i have to update the table with the status . So to track that i need the session reference of WD application which i m looking for .
How could i get the same . Kindly help me on this .
Thanks & Regards,
Mitul.

Hi ,
HttpSession session = request.getSession(false); //get the current session, if there is no session yet, return null
if (session == null) //forward to first page
else //do normal work
Then u can update ur session right ,
Regards ,
Venkat

Calling Webdynpro Java Application from Webdynpro ABAP Application.

Hi,
We have developed one Application using Webdynpro Java and I m in need to call the Webdynpro Java application from Webdynpro ABAP.
Require Suggestions to acheive this.
Thanks In advance.
Reg,
Ajay.

Dear Ajay,
Assuming that both your applications WDA & WDJ are in the portal & you don't have to pass any parameters to the WDJ application.
Write the following code on the action where you would call the WDJ application.
DATA:
        lr_compcontroller TYPE REF TO ig_componentcontroller,
        l_component TYPE REF TO if_wd_component ,
        lr_port_manager TYPE REF TO if_wd_portal_integration ,
        wa_navigation TYPE navigation.
lr_compcontroller =   wd_this->get_componentcontroller_ctr( ).
l_component = lr_compcontroller->wd_get_api( ).
lr_port_manager = l_component->get_portal_manager( ) .
* The value inserted into the navigation-target field can be found in the Portal
* content administration tab of your portal. It is the ID or PCD Location field
wa_navigation-target = pcd. " Please provide the PCD Location of the WDJ Application here.
wa_navigation-mode   = '0'. "0 = INTERNAL(same page) and 1 = EXTERNAL(new page).
CALL METHOD lr_port_manager->navigate_absolute
    EXPORTING
      navigation_target = wa_navigation-target
      navigation_mode   = wa_navigation-mode.
You can get the PCD from the Page properties of the WDJ application page in the Portal.
Hope it helps!
Warm regards,
Upendra Agrawal

How to integrate webdynpro java application in HTML pages?

hi EP GUrus
i need to re design an Webdynpro java application into web home page. there is one home page designed is wd java . now i have to redesign the page and i have make some web content like training calender new schemes and all which they manually update daily
thanks in advance
johny

hii sir
currently we have an application which is accessing through internet using url .that applicalion is wd java application which is need to redesign with dynamic contects

Providing sorting filters for a table in webdynpro java application

ho to provide sorting , filters , for a table in webdynpro java application .

Hi Pradeep,
Please go through the following article on implementation of filtering and sorting:
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/f024364b-3086-2b10-b2be-c0ed7d33fe65
The article contains a link to a sample application using the TableSorter and TableFilter Class.
The same classes can be used by any other web dynpro application. Download the sample application and copy the classes. In case of a specific requirement, modify the TableSorter and TableFilter classes.
Regards,
Kartikaye

Access ABAP table in Webdynpro Java application

Hi All
Is it possible to access ABAP table in Webdynpro Java application
Please provide your input
Thanks
Karthi D.

Hi you will connect to the remote SAP system, the
backend, using an Adaptive RFC MOdel. To access database tables, you can make use of existing functions in terms of RFC function modules. For each function module you need, the system generates a corresponding Java proxy class. All the generated proxy classes and interface are bundled together in the RFC model and treated as part
of your Web Dynpro project
In WebDynpro java you RFC by using Model :
Adaptive RFC Model
1. automatically adapts to changes in function module signature
2 provides support for data types and extensibility
3.support for different structure definitions in different backend
systems (release dependent structures, custom adaptation)
Basic principles and guidelines
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/11c3b051-0401-0010-fe9a-9eabd9c216de
See this blog
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/wdjava/faq%2b-%2bmodels%2b-%2badaptive%2brfc
http://help.sap.com/saphelp_nw04s/helpdata/en/6a/11f1f29526944e8580c5e59333d96d/frameset.htm
Thanks,
Tulasi

Reusability of Adobe form created in SFP in a WebDynpro Java application

Hi Experts,
Can some one advise me how I can use the pdf form created in ABAP side (Transaction SFP) in the WebDynpro Java application?
What is the procedure to include this pdf object in the WebDynpro application development?
Regards,
Shobhit

Hi,
You can add customised UI elements by a right click in your library pallette/ ot by dragging the ui elelments into the pallette. Like wise you can put your layout into the library pallette and reuse them. You may refer the Adobe life cycle designer (ALCD) help for it.
the second option i meant was after designing the layout in the SFP transaction, click on the PDF preview tab in the layout. Save the PDF.
NOw on developing the Java application, open the ALCD and use tools-> import to import the PDF you have saved.
Regards,
Anto.

Pass a table from my webdynpro JAVA application to an RFC in R/3

Hi All,
I need to Pass a table from my webdynpro JAVA application to an RFC in R/3. How can I do that?
Regards
Sarath

Hi,
Please have a look at this thread,
Pass Table as Input to Adaptive RFC
Regards,
Saravanan K

How to assign the Thems into Webdynpro Java Application

HI All,
I Downloaded the plugin for them editor and i add those plugins and i created the Them. Please any one can help me how to add that Them into Webdynpro java application.

Hi ep bhargav,
You can check this link.....
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/ccb6bcf4-0401-0010-e3bc-ec0ef03e13d1
Re: webdynpro theme editor
Thanks.
Venkat.

How to transfer parameters to Webdynpro Java application ?

Hello guys,
I had developed a Webdynpro Java application "ZWD", it's URL is
"http://jt-pldev:50000/webdynpro/dispatcher/local/ZWD_FLIGHT/ZWD".
"ZWD" had 2 input parametere "InputField" and "InputField1" .
Accroding to SAP Online Help document, we can transfer parameter Webdynpro application .
I want to transfer parameters to application "ZWD" via URL
"http://jt-pldev:50000/webdynpro/dispatcher/local/ZWD_FLIGHT/ZWD?InputField=Frankfurt" .
But it failed.
My questions:
1. How to transfer parameter to Webdynpro Java application "ZWD" ?
2. Does it possible that transfer input parameter to Webdynpro application and run the applicaiton via specific URL ?
BR,
Louis

Hi Louis,
You can refer to the following Bertram's article:
[Inter-Application-Navigation in Web Dynpro|https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sapportals.km.docs/library/user-interface-technology/wd%20java/wdjava%20archive/inter-application-navigation%20in%20web%20dynpro.pdf]
The process of accessing the Application URL parameters is explained for Target Component.
Regards,
Alka.

Is it possible to use the JS coding in webdynpro java application!!!

Hi Experts,
Is it possible to use the JS coding in webdynpro java application by any means?
If yes, kindly suggest the procedure or any pointers for the same.
Thanks in advance.
Regards,
Anurag

Hi,
I'm not an expert in this matter, but I will post here what I know:
In NW7 releases (at least 7.01.05) it is possible to run JS, also to capture any WD Event and run your own JS code after that, using IFRAME. I have jQuery running here, it would take some time till you create a "framework" to enable some easy usage. I just want to highlight that is possible, thou I think it's a lot of effort.
Not sure about CE7.1 it seems iFrame is deprecated. Still, being deprecated should not "block" the usage, thou it's not recommended since this functionality can be removed in next releases.
I've read that CE7.2 has JS support, and I think you should try having a word with Armin maybe..
Hope it helps,
Daniel

Is it possible to Disable Right Mouse click In WebDynpro Java Application??

Dear Experts,
Is it possible to Disable Right Mouse click In WebDynpro Java Application??
If yes then kindly suggest how.
Warm Regards,
Upendra Agrawal

What is the use-case?
Armin

Appying theme for Webdynpro java application.

Hi Friends,
I have change the font size and the content area of my WebDynpro java application which is a Standard Business package.
I have already applied the theme in the visual admin,but when I make the changes to the theme it does not reflect on the application part.
Please also let me know which specific theme values are to be changed.
Request for all your inputs and solutions.
Thanks,
Shyam

iViews used for application integration have a property called (technical name: LAF_Switch) like Send portal theme. This parameter defines if the portal will send to portal's style sheet definition. If so, the WDJ application will decide on some rules if or not to use the portal theme.
[The SAP Note 1000889|https://service.sap.com/sap/support/notes/1000889] explains how a WD application decides whether to apply the portal theme or not. The note also gives you some hints to find out why the portal theme isn't getting applied.
br,
Tobias

Lauching webdynpro java application

Similar Messages

Maybe you are looking for