Launch button for PS CC runs 32-bit version of program, not 64-bit version

I'm starting to get reports from people that after initially installing PS CC that the launch button created during installation launches the 32-bit version of PS CC instead of the 64-bit version.
To check which version you're running, click Help>About Photoshop... on the menu bar.
The version that shows up should have "x64" at the end for the 64-bit version of the program.
If the version is "x32", you can get a launch button for the 64-bit version inside the application folder--C:/Program Files/Adobe/Adobe Photoshop CC (64-bit).
So far this appears to be an issue just with Windows computers.

Tony,
It is not an issue, By default on a 64 bit Win machine both PS 32 bit and 64 bit application get installed.
If you want to work with 64 bit application launch Adobe Photoshop CC(64 bit) from Start->Programs, Otherwise for 32 bit Ps Adobe Photoshop CC.
To still verify the launched version, the steps you mentioned would help.
Regards,
Ashutosh

Similar Messages

Hp quick launch buttons for HP dv2740se in Windows 7(64bit) Ultimate

I already use hp quick launch buttons for vista(64bit).
but it is not a work.

@ciscruz
Hi,Write down Your p/n number which is under Your computer and looks like this.
** Say thanks by clicking the "Thumb up" icon which is on the left. **
** Make it easier for other people to find solutions, by marking my answer with "Accept as Solution" if it solves your issue. **

I 'think' my Ipod Touch is in recovery mode and people say to hold the power and home button for 10 sec and i did, but its still not turning back on. Plus its dead and wont charge

I 'think' my Ipod Touch is in recovery mode and people say to hold the power and home button for 10 sec and i did, but its still not turning back on. Plus its dead and wont charge. PLZ HELP ME!!!!

- If in recovery mode the screen will have an iTunes logo with an USB plug.
- Have you tried connecting it to your computer for a n hw and then see if it appears in iTunes. If it does restore the iPod.
- If screen is blank, try placing he iPod in recovery mode and then restoring. For recovery mode:
iPhone and iPod touch: Unable to update or restore

TS3274 MY IPAD screen is unresponsive. I tried to reset by pressing the power button for a long a few seconds but it is not responding either.

MY IPAD screen is unresponsive. I tried to reset by pressing the power button for a long a few seconds but it is not responding either.

Try reset iPad
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
Note: Data will not be affected.

Can I use mouse side buttons for pageup/pagedown like in previous version?

In firefox 3.x I use mouse side buttons for pageup/pagedown. When I install new version I found that this buttons is used for back/forward page. Can I somehow change that?

[[How do I customize the toolbars?]] should help you out

Where's the 3g button for ipad 2 running on ios 5.1

after upgrading my ipad 2 from ios 4.3.3 to 5.1 cant find the 3g button to turn... where is it?

Afaik, it doesn't display "3G", it shows the name of your carrier (AT&T in my case). I'd guess that's what the "O" is representing.

HT201269 When I plug my iPhone 5s into the computer to restore it from iTunes a pop-up comes up and says "this version of iTunes has not been correctly localized for this language. Please run the English version." I have no idea what that means or how to

In need of help figuring this phone stuff out! I am trying to get all the apps from my husbands old phone to his new one. I have already backed up the old phone and got everything onto iTunes, but every time I plug the new iPhone 5s into my computer it says that the version of iTunes is not correctly localized for this language and asks for me to run the English version. I have no idea how to do that? Please help.

Hi Celia51510,
Welcome to the Support Communities!
The article below may be able to help you with this issue.
Click on the link to see more details and screenshots.
I can't tell from your post if you are using a Windows or a Mac Computer.
Try deleting the iTunes application and redownloading the version you need below:
iTunes 11.1 Download for Mac
http://support.apple.com/kb/DL1614
iTunes 11.1 for Windows (64-bit)
http://support.apple.com/kb/DL1615
Cheers,
- Judy

How to create own button for closed captioning

Hi,
I have created my own buttons for play, pause, exit etc. But I do not know how to create button to show closed captioning. I tried few hours but I give up. What I need to do?:
First clik - closed captioning will appear
Second clik - closed captioning will disapear.
And so on appear/disapear/appear/disapear
Help please!
Poul

Have a look at: Toggle Shape buttons - Captivate 6 - Captivate blog
Replace the system variable cpCmndMute by cpCmndCC and you'll have the choice between different scenarios.

Forward/ back button for various sub-folders

Hello all,
Here's the scenario.....
I have a forward and back button that load several images in a sub-folder that load to a UIloader....
next_btn.addEventListener(MouseEvent.CLICK, nextImage);
function nextImage2(evtObj:MouseEvent):void{
imageNumber++;
LargeImageLoader.source = "portfolio/UIloader/bike/00"+imageNumber+".jpg";
checkNumber();
back_btn.addEventListener(MouseEvent.CLICK, backImage);
function backImage2(evtObj:MouseEvent):void{
imageNumber--;
LargeImageLoader.source = "portfolio/UIloader/bike/00"+imageNumber+".jpg";
checkNumber();
Since I have multiple sub-folders for my portfolio, I was wondering how to apply these same buttons to other sub-folder image paths without needing to create a pair of forward/back buttons for each sub-folder.
Thanks!

It's not entirely clear to me, but what I think you need to do for what I think you are saying you want to do would be to make the folder targeting (portfolio/UIloader/bike/, et al) a variable as well. The only missing link is what you would use to redefine the folders.
Your next/prev buttons can't be that smart unless you have some conditional logic that helps them realize a particular imageNumber range belongs to a particular folder. If your images have the same file names (00#.jpg) across the different folders then that won't help. I believe you would need them to be sequential such that no folder repeats the filenames/numbers of another

I'm still new to apple. I have a prompt that two of my apps have updates. Will it tell me if the update is free or has to be paid for? All I see is the button for "update"

I'm still new to apple. I have a prompt that two of my apps have updates. Will it tell me if the update is free or has to be paid for? All I see is the button for "update"

Automatic updates that look like this do not add cost beyond what you originally paid:
This is how Apple delivers the patches and updates that are detected to apply to your system.
Did iy look like something else?

HP CQ41-224 TX : HP Quick Launch Button did not funtion on Windows 7 Home Premium 64 bit

Hello,
I have bought a new notebook HP CQ41-224TX without OS (free dos) and upgrade the momory to 4 Gb.
I have installed this notebook with Windows 7 Home Premium 64 bit and all HP CQ41-224TX driver 64 Bit.
All function on this notebook running well accept Fn+F7 and Fn+F8 (for brightness) do not work.
I have reinstall the HP Quick Launch Button, but nothing changed.
Does Anyone has this problem.? and how to solve this problem.. pls let me konw. Thanks
Regards
Febrianr

Hi lustyln,
I'm having a little trouble understanding all of what you are trying to explain. From what I can tell, it sounds like your PC has a lot of software problems and you want to know what is supposed to be there and what isn't.
For reference, here are your product specifications:
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&dlc=en&docname=c01893242&lc=en&product=4043282
To get your PC software back to how it was when it was first purchased, run a system recovery:
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&dlc=en&docname=c01867418&lc=en&product=4043282
I hope this helps.
...an HP employee just trying to help where I can, but not speaking on behalf of HP.

I have a button in JSP page inside an UIWebView by pressing the button i want to run another existing iPhone native application in background only.Do anyone have a solution for this.

I have a button in JSP page inside an UIWebView by pressing the button i want to run another
existing iPhone native application in background only.Do anyone have a solution for this.

Sounds like a virus.... I hope it's not...
Launching Other Apps within an iPhone

HT204406 Please help! I have downloaded the 64 bit version of iTunes for my Sony running WIndows 8. I have iTunes running on 3 other machines (MACs) with no issue. On the Sony with WIndowns everytime I turn on ITunes Match WIndows fails, everything shu

I Have downloaded the 64 bit version of iTunes for my Sony running Windows 8. Install went fine and I can get in to iTunes and see the music residing on this machine. However, everytime that I try to run iTunes Match Windows crashes. So frustrating. BTW, this worked fine until a couple of weeks ago. Anyone know what's going on?

How big is your library? I would recommend the following troubleshooting steps:
- Backup your library. Always a good idea before messing with things.
- Create a new library.   Refer to this article for details: http://support.apple.com/kb/HT1589. This won't delete your old library, you're just creating a new empty one. Also refer to this article to get back to your old library later.
- Add a few albums into this new library. Not everything, just a small sampling, as a test.
- Activate Match on this new library. You shouldn't have to re-pay, it should just say "Add Computer" or similar.
- At this point, Match should run again. With just a few albums it should complete in just a few minutes.
If iTunes doesn't crash at this point, then likely there's something about your original library that Match doesn't like - what that is I don't know, but at least you'll know it's not your PC.   If iTunes still crashes, then if could be a number of other things, but probably not your library.   My next suggestion (if you haven't already done this) is to uninstall / reinstall iTunes.   If that doesn't work, then my next ideas you won't like.

How to make a button to stop and run a for loop?

How to make a button to stop and run a for loop? and if it is stopped it shall start from where i t stopped.

Your VI has some very fundamental flaws.
The start/stop button is outside the FOR loop, thus it will NOT get read during execution of the FOR loop, but only before the FOR loop starts. Think dataflow!
Thus the terminal of the start/stop button belongs inside the FOR loop.
Your FOR loop iterates 20x, which probably takes about a nanosecond. You will NOT be fast enough to reliably press the start/stop button during a specific iteration of the FOR loop.
Your code does not "stop and run" a FOR loop (sic). The loop always spins, but executes an empty case when "Stopped". I guess that's what you actually want?
Once you solve (2), the x indicator will contain a random value whenever you "stop".
As soon as the 20 iterations complete, the outer while loop spin an things start over, another nanosecond later.
Place e.g. a 500ms wait inside the FOR loop to solve this.
Don't place terminals of indicators on top of formula nodes.
Your formula does not produce any output, so really has no purpose.
Use a real "stop" button to terminate the while loop (mechanical action: latch when released). Right now you are using a plain switch, which does not reset to false before the next run. This means that you need to manually reset it before running the program again.
It is oftern useful to operate the VI in execution highlighting mode. You will immediately see that your button does not get read during execution of the FOR loop. Try it!
LabVIEW Champion . Do more with less code and in less time .

Whenever I close my laptop then open it it does not turn back on, the screen stays off but I will hear the fan running. I then have to physically press the power button for it to turn on. Help!

Whenever I close my laptop then open it it does not turn back on, the screen stays off but I will hear the fan running. I then have to physically press the power button for it to turn on. Help!

Try here. iPhone and iPod touch: Frozen and unresponsive

Launch button for PS CC runs 32-bit version of program, not 64-bit version

Similar Messages

Maybe you are looking for