Launch Integration Builder
Hi,
I am new to XI Having problem in launching INTEGRATION BUILDER which I am getting message 'web pages not found'.
My web address is like "http://pi71server1:50000/dir/start/index.jsp".
But my configuration settings in 'SXMB_ADM' > Integration engine configuration> parameters: IS_URL current value dest://SAPISU_XID.
I know I am missing some thing here. And also I have taken care on JAVA WEB START.
But I coundnt stat 'Integration Builder'.
Could some one please let me know where exactly I am missing.
Thanks,
Deepak.
Hi Deepak,
I think the problem with JAVA Version,which version of jre installed on your machine,use 1.5 version,it wl work fine.
Are you able to access ABAP Stack?? if yes then the problem with JRE only.
Regards,
Raj
Similar Messages
-
Can't Launch Integration Builder, help me.
I downloaded Full ABAP Edition of SAP NetWeaver Sneak Preview and Trial, after install, I wanna develop XI-CONTENT, but cann't Launch Integration Builder, always open 'SapWorkDir' directory, but no error message showed, status bar print "starting browser...". And I did not using J2ee Server, only ABAP edition, of course J2SE 1.4.2.12 has been installed.
I do not known why , thanks for any help.
by the way I looked Syslog, there always a "Communications data: Service initialization failed" message each time I start NSP instance, but every things seems ok.Hi,
Just adding on to what Michal said,
SDN has recently released 2 Sneak Preview products:
- SAP NetWeaver 04 SP15 Full Java Edition
- SAP NetWeaver 04s Full ABAP Edition (with Web Dynpro for ABAP)
But for XI we need both the Java and Abap stacks and not just having them individually, because of which you cannot use it for XI.That is, the Sneak Preview products contain either the JAVA or the ABAP stack but not both together.
The link below i guess will also help you learn more about the Sneak Preview products and get a clear idea on the same:
http://www.howforge.com/news/sneap-prevew-sap-netweaver-04-sp15-java-abap
And incase you had installed XI or PI has Michal suggested then probably the solution provided by Ben will be useful..
I hope this clears your doubt....
Regards,
Abhy -
Problem Launching Integration Builder
Hi XI Gurus,
I am getting Problem with Launching Integration Builder
I Installed XI SP15, I am able to launch IB from server where I installed XI, but not able to launch IB from different machines in my network, I tried different possible scenarios which are available in sdn . like setting webstart preferences ,clearing cache of webstart, playing with Administration tool by Re-Initialization, Re-Initialization and force-signing, and delete lock, added Sysetem IP in dispatcher services binding,I tried, tried ............. now I am tired.
Please help me now I am struck.
Thanks!
Kindest Regards
Srinivas AyyalaHi Aravind and Michal,
thanks for your timely reply, I tried with IP Address in browser too and i forgot one more thing I did in my POST
when i tried with wrong userID and password I am getting message stating that not authenticated
now i configured my webstart for log
I Got this message in my log file
Logging to file: C:\WebStartLog\webstartproblem
INFO: using logging implementation "Dual SAP/AII Logging"
INFO: log configuration file "C:\Documents and Settings\vsshetty\Desktop\log.properties" could not be read
INFO: using simple log configuration
<<< frog.jar: version 5.1.4 08/20/04 sap.theme: Streamline >>>
java.lang.NoClassDefFoundError: com/sap/engine/services/security/server/AuthenticationContextImpl
at com.sap.engine.services.security.login.SecuritySession.expire(SecuritySession.java:236)
at com.sap.engine.services.security.login.SecuritySession.setExpirationPeriod(SecuritySession.java:316)
at com.sap.engine.services.security.login.TicketGenerator.getSecuritySession(TicketGenerator.java:127)
at com.sap.engine.services.security.login.SecurityContext.load(SecurityContext.java:234)
at com.sap.engine.services.rmi_p4.Message.loadContextObject(Message.java:343)
at com.sap.engine.services.rmi_p4.Message.parseMessage(Message.java:239)
at com.sap.engine.services.rmi_p4.Message.getByteArrayInputStream(Message.java:314)
at com.sap.engine.services.rmi_p4.Call.getResultStream(Call.java:183)
at com.sap.engine.services.security.remote.login.RemoteLoginContextHelper_Stub.login(RemoteLoginContextHelper_Stub.java:126)
at com.sap.engine.services.security.remote.login.RemoteLoginContext.login(RemoteLoginContext.java:140)
at com.sap.aii.ib.clsif.login.EJBHomeFactory.logonWithoutTicket(EJBHomeFactory.java:503)
at com.sap.aii.ib.clsif.login.EJBHomeFactory.connect(EJBHomeFactory.java:354)
at com.sap.aii.ib.clsif.login.EJBHomeFactory.initRemoteFactory(EJBHomeFactory.java:117)
at com.sap.aii.ib.clsif.login.LoginServiceProvider$LoginServiceImpl.initRemoteFactory(LoginServiceProvider.java:314)
at com.sap.aii.ib.clsif.login.LoginServiceProvider$LoginServiceImpl.login(LoginServiceProvider.java:216)
at com.sap.aii.ib.clsif.login.LoginServiceProvider$LoginServiceImpl.login(LoginServiceProvider.java:172)
at com.sap.aii.ib.clsif.login.LoginServiceProvider$LoginServiceImpl.login(LoginServiceProvider.java:166)
at com.sap.aii.ib.gui.login.SplashLoginImpl.doLogin(SplashLoginImpl.java:165)
at com.sap.aii.ib.gui.login.SplashLoginFrame$6.run(SplashLoginFrame.java:440)
at java.awt.event.InvocationEvent.dispatch(Unknown Source)
at java.awt.EventQueue.dispatchEvent(Unknown Source)
at java.awt.EventDispatchThread.pumpOneEventForHierarchy(Unknown Source)
at java.awt.EventDispatchThread.pumpEventsForHierarchy(Unknown Source)
at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
at java.awt.EventDispatchThread.run(Unknown Source) -
How to launch integration builder with IE proxy?
Hi,gurus:
Our XI server is in remote side, so we have to set the IE proxy while launching integration server.But as you know,the integration builder woud not be launched successfully with IE proxy.So how can we deal with it?
Any help will be appreciated!Hi,
The error message is "unable to launch integration builder" ,which all of us might have ever met.
I think it is the cause of IE proxy,but we have to set the proxy to get the environment from remote XI server.
I have referenced note 800267,but it seems of no avail.
Any ideas? -
Unable to Launch Integration Builder: Java Web Start problem
Hi,
I am unable to launch the integration builder. I am using JDK 1.4.2_05. The java Web Start gives the following error:
Unsigned application requesting unrestricted access to system
Unsigned resource: http://<XIHostName>:50000/rep/repository/aii_util_rb.jar
I have tried deleting the Java web start cache, and even reinstalling the JDK.
Can someone suggest a workaround this problem ?
thanks,
ManishThe Java Web Start cannot accept unsigned jars. If the jars are signed, it will ask in a dialog box if it should allow unrestricted access to this jar.
In my case, I upgraded XI SP0 to SP4, which included updating the Adapter Core, Adapter Framework, and the XI TOOLS to SP4.
On launching the Web start, it seemed that the jars were not getting signed. JWS cannot allow unsigned jars to the client.
These jars are maintained in:
\usr\sap\<SID>\SYS\global\xi\directory_server\javaws\directory
I am having problems with my XI upgrade to SP4, and it is probably not signing the jars.
Do you know why this may be happening ...
thanks,
Manish -
Launch Integration Builder - Checking version
I have recently received a new laptop at work.
When I launch the Integration Builder: Design and Integration Builder: Configuration from the web page, it says checking for latest version before actually launching the application and this takes ages.
Is there anyway to stop this happening. It didn't do this on my old machine.
We are on XI3.0 (sp12), I am have JAVA 1.4.2_08 on my machine.hi,
try moving content of 2 folders from:
C:\Documents and Settings\<b>youruser</b>\Application Data\Sun\Java\Deployment\javaws\cache\http\D<b>XISERVER</b>\P<b>J2eeport</b>
to some other location
when next time you'll log to IB java will be loaded again
and this may help you
Regards,
michal -
Unable to open/launch Integration Builder.
Hi,
I am unable to open Integration Builder.
Once I click on the link "integration directory", User Id and Password screen appears and when I enter the correct user ID and Password, Nothing happens, only the" Wait" icon appears for ever.
I understand that itu2019s something to do with our access in my machine. We have stiff security policies.
In internet explorer setting --> I have "Accept all Cookies" and also Pop-ups are not blocked (as Privacy setting)
Please help me to resolve this issue.
Regards,
RehanNothing happens, only the" Wait" icon appears for ever.
Please check with your basis if there in any space issue in the server.Also check if your other mates can open the Builder or not.
Go to control panel->java->general->delete temp internet files and try lauching.
If there is any issue with java webstart the
Check /people/shabarish.vijayakumar/blog/2006/02/13/unable-to-open-iresrid-xipipi-71-updated-for-pi-71-support .
Go to integration Builder ->Administration tab ->Java webstart administration.>Reinitialize
Regards,
Srinivas
Edited by: Srinivas on May 5, 2010 11:58 AM -
How to Launch an Integration Builder under two different java versions
How to Launch an Integration Builder under two different java versions 1
1. Situation 2
2. How To Do 2
2.1 jre preparation 2
2.2 Put them into the system 2
2.3 Execute a Java Web Start under jre 1.4.x version 3
2.4 Change Java Runtime Versions 3
2.5 Launch an Integration Builder 6
1. Situation
OS: windows 2000 pro English
Java version: jdk 1.5.x was already installed. (Its not permitted to change.)
I dont have any authorization to install any software on the PC.
But I need to use an Integration Builder.
I already knew URLs of an Integration Builder (http://<hostname>:50000/rep/start/repository.jnlp).
2. How To Do
At this moment, an Integration Builder (XI 3.0) can be launch under jre 1.4.x environment (on windows).
2.1 jre preparation
I download j2re-1_4_2_10-windows-i586-p.exe from http://java.sun.com/j2se/1.4.2/download.html
I installed it on my home PC and copied all files from C:\Program Files\Java\ j2re1.4.2_10\ into my USB.
2.2 Put them into the system
I pasted j2re1.4.2_10 folder from my USB into the windows 2000 pro system.
Finally, I could list up all of javaws.exe under this system.
c:\j2re1.4.2_10\javaws\javaws.exe
c:\Program Files\Java\jdk1.5.0_05\bin\javaws.exe
c:\Program Files\Java\jdk1.5.0_05\jre\bin\javaws.exe
c:\Program Files\Java\jre1.5.0_05\bin\javaws.exe
2.3 Execute a Java Web Start under jre 1.4.x version
I executed c:\j2re1.4.2_10\javaws\javaws.exe .
2.4 Change Java Runtime Versions
Go to File-> Preferences -> Java
As you can see, it indicates 1.5 version.
Click [FIND] button.
Click [NEXT] button.
Click the j2re1.4.2_10 folder.
Click [NEXT] button.
A JRE Finder is able to find javaw.exe automatically. Or you can indicate C:\j2re1.4.2_10\bin\javaw.exe directly.
Click [NEXT] button.
Finally, there are two Java Runtime Versions. Now you need to uncheck the Enabled column of 1.5 version and check 1.4 version.
Click [OK] button.
Well, in the General tab, I selected None for Proxies.
2.5 Launch an Integration Builder
In the Location field, I typed the URL of an Integration Builder jnlp.
http://<hostname>:50000/rep/start/repository.jnlp
SAP Integration Builder comes up inside Applications area.
Select it and click [Start] button.
If you click Environment-> Integration Builder (Configuration), you can launch Integration Builder: Configuration.
[PDF file location] with screenshots
http://SDN.mobilian.org/SDN/How2LaunchIB.rar
===================Advertisement==========================
How do you search SDN?
What about [<b>SDN Search Widget</b>]?
SDN Search Widget
=========================================================I am not getting anywhere with deploying my application or
applet.
I have set up my bc4j project. It contains all my VO info,
links, application module. (proj a)
I then have another project with DbInfo in it(has all my rowset
info), Multiple Frames, and my Applet.java file.
Actually I have an Applet.java file and a Application.java file
because I was seeing if both/either worked. Anyway they seem the
same, except for that extra window that comes up when you run the
applet.
I follow the steps in the oracle directions (from earlier post).
And all seems ok. But at ---->
[*] Select the subdirectory under myhtml where your applet's HTML
file
is located, and enter the directory path of the 'staging'
directory you
created in step 3 above, if different from the default.</li>
[*]Select the HTML files that JDeveloper created to run your
applet.</li>
[*]Select all of the Java source files in your project that make
up the
applet.</li>
I have no HTML file associated with my applet, at least that I
know of.
So do I need to create one, or should it of been done
automatically.
Also, I trying to figure out what will be the best way to deploy
my project. Applet or stand alone application is what my first
choices have been so far. I have read that there is some issues
with applets being served from a different server than the
database. So a stand alone application was my front runner, but
I haven't gotten either way to work yet. -
Can't open Integration Builder Repository in SAP XI 7.0 after CodeMigration
We had Communication Channel code change , for which the cache in the adapter engine was failed up update automatically. I rebounced the Web AS SAP Server ( Java stack only) and after than point I cannot launch Integration Builder Tool( Repository) in SAP XI 7.0.All other message are processing fine.Only we cannot open the Integration Buildter tool using URL
http://<hostname>:58900/rep/start/index.jsp
500 Internal Server Error
Exception
An internal error occurred. Contact you XI administrator
java.lang.NoClassDefFoundError: com.sap.aii.ibrep.server.transport.impl.service.InternalRepTransportServiceImpl (initialization failure)
Error Details, Error History, Build Info, Generic Application Info
Any take on this one?Please help. This is our Production Server.
Thanks
Satpal SinghPraveen,
Restarted both ABAP and JAVA , but did not helped.We did that as first step.
We are unable to launch the Integration Server Repositorty Tool.
We get following detail on the Error info of the page that shows up.
500 Internal Server Error
Exception Details
Exception class: java.lang.NoClassDefFoundError
Message
java.lang.NoClassDefFoundError: com.sap.aii.ibrep.server.transport.impl.service.InternalRepTransportServiceImpl (initialization failure)
Stacktrace
Thrown:
java.lang.NoClassDefFoundError: com.sap.aii.ibrep.server.transport.impl.service.InternalRepTransportServiceImpl (initialization failure)
at java.lang.J9VMInternals.initialize(J9VMInternals.java:130)
at com.sap.aii.ibrep.server.transport.api.RepTransportServiceStartup.startupIbrepTransportServices(RepTransportServiceStartup.java:22)
at com.sap.aii.ibrep.server.applcomp.StartupCodeEntry.startup(StartupCodeEntry.java:442)
at com.sap.aii.ib.core.applcomp.IStartupCodeEntry.startupIfNotAlreadyDone(IStartupCodeEntry.java:33)
at com.sap.aii.ib.core.applcomp.ExplicitApplicationComponentImpl.startup(ExplicitApplicationComponentImpl.java:116)
at com.sap.aii.ib.core.applcomp.ExplicitApplicationComponents.startup(ExplicitApplicationComponents.java:383)
at com.sap.aii.ib.core.applcomp.ApplicationComponent.startup(ApplicationComponent.java:209)
at jsp_Main1203628046558._jspService(jsp_Main1203628046558.java:21)
at com.sap.engine.services.servlets_jsp.server.jsp.JspBase.service(JspBase.java:112)
at com.sap.engine.services.servlets_jsp.server.servlet.JSPServlet.service(JSPServlet.java:544)
at com.sap.engine.services.servlets_jsp.server.servlet.JSPServlet.service(JSPServlet.java:186)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:387)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:365)
at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:944)
at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:266)
at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
at java.security.AccessController.doPrivileged(AccessController.java:215)
at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170) -
NW2004s XI Can not start Transaction: Integration Builder
NW2004s ABAP + Java
In both 000 and 001 client, on trying to launch "Integration Builder" using transaction "sxmb_ifr". The message says "Starting browser..." and opens the local sap folder on my PC. It does not launch the Web Browser (Internet Explorer) as it should.
Anybody else facing the same problem ?Do you have the values in the exchange profile setup correctly...
This should have been part of the post installation activities to be done...
Check the exchange profile parameters in url
http://<webas>:5<sysnr>00/exchangeProfile
verify the entries under "Connections"
Thanks,
Renjith -
The launching time of integration builder is extremely longer
Dear XI experts
I will tell you our story.
When I execute Demo examples (Chapter 5.1.3 Executing and Testing XI 3.0 Demo Examples Configuration)
We got the error STRING_BAD_REF dump when starting BSP application, I found out the solution : SAP Note Number : 869197
We did upgrade to a 6.40 kernel patch level 48 as mentioned in the SAP note.
After that, whenever I launch (start) the integration builder, it takes for ages.
Between [login screen]
http://static.flickr.com/56/117541396_db88ce7101_o.jpg
And [integration builder launching screen]
http://static.flickr.com/35/117541397_4bc79529e8_o.jpg
Ironically the websites related to Java engine pop up as usual, such as SLD, Java start page and so on. Also after few minutes I can get the integration builder in front of my eyes. However, whenever I try to create objects or call some information from the server it also takes time.
Which part do I need to look at in details?
Thank you for your reading.
I will appreciate your any comment.
Regards,
DavidI collect some posts related to my problem ( i think ).
Slow response time
Problems in RWB XI 3.0
XI Running Very Slow
XI Running Very Slow
Performance Tuning
Re: Performance Tuning
Problems after Update to SP13
Problems after Update to SP13
Server Performance Declines
Server Performance Declines
Performance Analysis with Single Message
http://help.sap.com/saphelp_erp2005/helpdata/en/42/e7bb8f7c9d3ee0e10000000a1553f6/content.htm
Problems in RWB XI 3.0
Mapping tool very slow after upgrade to SP15 -
Error during launching the integration builder
Hi
I installed XI3.0 SR1 as for the installation guide.When i am accessing the Integration builder during Java webstart ,i am getting the following error after launching during Java Web start
<b>An error occurred while launching/running the application.
Title: Integration Builder
Vendor: SAP AG
Category: Launch File Error
JAR resources in JNLP file are not signed by same certificate</b>
Can anyone figure out error urgently.
regardsHi Usman,
Have a look of the following thread:
<b>Integration Builder doesn't start after SP11 </b>
Integration Builder doesn't start after SP11
and this one for more details:
http://java.sun.com/j2se/1.5.0/docs/guide/javaws/developersguide/faq.html#213
Cheers,
Rob.
Message was edited by: Rob Viana -
Unable to launch Report Builder 3.0
I am running Reporting Services 2012 in Sharepoint integrated mode. I'm using Sharepoint 2010. My server is located in the US. Both my overseas and US users are unable to launch Report Builder but the errors are different.
Overseas user:
Following errors were detected during this operation.
* [05/4/2012 7:43:26 PM] System.Deployment.Application.InvalidDeploymentException (ManifestLoad)
- Exception occurred loading manifest from file MSReportBuilder.exe: the manifest may not be valid or the file could not be opened.
- Source: System.Deployment
- Stack trace:
at System.Deployment.Application.Manifest.AssemblyManifest.ManifestLoadExceptionHelper(Exception exception, String filePath)
at System.Deployment.Application.Manifest.AssemblyManifest.LoadFromInternalManifestFile(String filePath)
at System.Deployment.Application.DownloadManager.ProcessDownloadedFile(Object sender, DownloadEventArgs e)
at System.Deployment.Application.FileDownloader.DownloadModifiedEventHandler.Invoke(Object sender, DownloadEventArgs e)
at System.Deployment.Application.SystemNetDownloader.DownloadSingleFile(DownloadQueueItem next)
at System.Deployment.Application.SystemNetDownloader.DownloadAllFiles()
at System.Deployment.Application.FileDownloader.Download(SubscriptionState subState)
at System.Deployment.Application.DownloadManager.DownloadDependencies(SubscriptionState subState, AssemblyManifest deployManifest, AssemblyManifest appManifest, Uri sourceUriBase, String targetDirectory, String group, IDownloadNotification
notification, DownloadOptions options)
at System.Deployment.Application.ApplicationActivator.DownloadApplication(SubscriptionState subState, ActivationDescription actDesc, Int64 transactionId, TempDirectory& downloadTemp)
at System.Deployment.Application.ApplicationActivator.InstallApplication(SubscriptionState& subState, ActivationDescription actDesc)
at System.Deployment.Application.ApplicationActivator.PerformDeploymentActivation(Uri activationUri, Boolean isShortcut, String textualSubId, String deploymentProviderUrlFromExtension, BrowserSettings browserSettings, String& errorPageUrl)
at System.Deployment.Application.ApplicationActivator.ActivateDeploymentWorker(Object state)
--- Inner Exception ---
System.Deployment.Application.DeploymentException (InvalidManifest)
- Cannot load internal manifest from component file.
- Source:
- Stack trace:
US user:
Following errors were detected during this operation.
* [5/4/2012 11:03:17 AM] System.Runtime.InteropServices.COMException
- Failed to load the runtime. (Exception from HRESULT: 0x80131700)
- Source: System.Deployment
- Stack trace:
at System.Deployment.Application.NativeMethods.GetRequestedRuntimeInfo(String pExe, String pwszVersion, String pConfigurationFile, UInt32 startupFlags, UInt32 runtimeInfoFlags, StringBuilder pDirectory, UInt32 dwDirectory, UInt32& dwDirectoryLength,
StringBuilder pVersion, UInt32 cchBuffer, UInt32& dwLength)
at System.Deployment.Application.Win32InterOp.SystemUtils.CheckSupportedImageAndCLRVersions(String path)
at System.Deployment.Application.SubscriptionStore.CheckApplicationPayload(CommitApplicationParams commitParams)
at System.Deployment.Application.SubscriptionStore.CommitApplication(SubscriptionState& subState, CommitApplicationParams commitParams)
at System.Deployment.Application.ApplicationActivator.InstallApplication(SubscriptionState& subState, ActivationDescription actDesc)
at System.Deployment.Application.ApplicationActivator.PerformDeploymentActivation(Uri activationUri, Boolean isShortcut, String textualSubId, String deploymentProviderUrlFromExtension, BrowserSettings browserSettings, String& errorPageUrl)
at System.Deployment.Application.ApplicationActivator.ActivateDeploymentWorker(Object state)Hi,
My issue is not resolved as i am also facing same issue. OS of the server is windows 2012, .net 4.5 is installed so don't need to install .net 4 separately. Here i am giving error details
PLATFORM VERSION INFO
Windows : 6.2.9200.0 (Win32NT)
Common Language Runtime
: 4.0.30319.18408
System.Deployment.dll
: 4.0.30319.17929 built by: FX45RTMREL
clr.dll : 4.0.30319.18408 built by: FX451RTMGREL
dfdll.dll : 4.0.30319.17929 built by: FX45RTMREL
dfshim.dll : 4.0.41209.0 (Main.041209-0000)
SOURCES
Deployment url
: http://xxx/sites/xxxx/_vti_bin/ReportBuilder/ReportBuilder_3_0_0_0.application?SaveLocation=http%3a%2f%2fxxx%2fsites%2fxxxx%2fDocuments
Server
: Microsoft-IIS/8.0
X-Powered-By
: ASP.NET
X-AspNet-Version: 4.0.30319
Application url
: http://xxx/sites/xxxx/_vti_bin/ReportBuilder/RptBuilder_3/MSReportBuilder.exe.manifest
Server
: Microsoft-IIS/8.0
X-Powered-By
: ASP.NET
X-AspNet-Version: 4.0.30319
IDENTITIES
Deployment Identity
: ReportBuilder_3_0_0_0.application, Version=11.0.3000.0, Culture=neutral, PublicKeyToken=c3bce3770c238a49, processorArchitecture=x86
APPLICATION SUMMARY
* Online only application.
* Trust url parameter is set.
ERROR SUMMARY
Below is a summary of the errors, details of these errors are listed later in the log.
* Activation of http://xxx/sites/xxxx/_vti_bin/ReportBuilder/ReportBuilder_3_0_0_0.application?SaveLocation=http%3a%2f%2fxxx%2fsites%2xxxx%2fDocuments resulted in exception. Following failure messages were detected:
+ Application manifest has either a different computed hash than the one specified or no hash specified at all.
+ File, MSReportBuilder.exe.manifest, has a different computed hash than specified in manifest.
COMPONENT STORE TRANSACTION FAILURE SUMMARY
No transaction error was detected.
WARNINGS
There were no warnings during this operation.
OPERATION PROGRESS STATUS
* [8/25/2014 3:37:07 AM] : Activation of http://xxx/sites/xxxx/_vti_bin/ReportBuilder/ReportBuilder_3_0_0_0.application?SaveLocation=http%3a%2f%2xxx%2fsites%2fxxxx%2fDocuments has started.
* [8/25/2014 3:37:07 AM] : Processing of deployment manifest has successfully completed.
* [8/25/2014 3:37:07 AM] : Installation of the application has started.
ERROR DETAILS
Following errors were detected during this operation.
* [8/25/2014 3:37:10 AM] System.Deployment.Application.InvalidDeploymentException (HashValidation)
- Application manifest has either a different computed hash than the one specified or no hash specified at all.
- Source: System.Deployment
- Stack trace:
at System.Deployment.Application.DownloadManager.DownloadApplicationManifest(AssemblyManifest deploymentManifest, String targetDir, Uri deploymentUri, IDownloadNotification notification, DownloadOptions options, Uri&
appSourceUri, String& appManifestPath)
at System.Deployment.Application.DownloadManager.DownloadApplicationManifest(AssemblyManifest deploymentManifest, String targetDir, Uri deploymentUri, Uri& appSourceUri, String& appManifestPath)
at System.Deployment.Application.ApplicationActivator.DownloadApplication(SubscriptionState subState, ActivationDescription actDesc, Int64 transactionId, TempDirectory& downloadTemp)
at System.Deployment.Application.ApplicationActivator.InstallApplication(SubscriptionState& subState, ActivationDescription actDesc)
at System.Deployment.Application.ApplicationActivator.PerformDeploymentActivation(Uri activationUri, Boolean isShortcut, String textualSubId, String deploymentProviderUrlFromExtension, BrowserSettings browserSettings, String&
errorPageUrl)
at System.Deployment.Application.ApplicationActivator.ActivateDeploymentWorker(Object state)
--- Inner Exception ---
System.Deployment.Application.InvalidDeploymentException (HashValidation)
- File, MSReportBuilder.exe.manifest, has a different computed hash than specified in manifest.
- Source: System.Deployment
- Stack trace:
at System.Deployment.Application.ComponentVerifier.VerifyFileHash(String filePath, Hash hash)
at System.Deployment.Application.ComponentVerifier.VerifyFileHash(String filePath, HashCollection hashCollection)
at System.Deployment.Application.DownloadManager.DownloadApplicationManifest(AssemblyManifest deploymentManifest, String targetDir, Uri deploymentUri, IDownloadNotification notification, DownloadOptions options, Uri&
appSourceUri, String& appManifestPath)
COMPONENT STORE TRANSACTION DETAILS
No transaction information is available. -
Unable to launch Integeration Builder - Java Web Start - Unexpected Error
Hi there,
I am not able to launch the Integeration builder. The ESR has no problem and is working fine though.
Here is the exception :- com.sap.aii.ibdir.gui.appl.ApplicationImpl
I have tried below options already :
1. Cleared the java cache under - javaws -logviewer
2. Go into administration and inside Directory --> Java Web Start Administration clicked "Restore archives and generate new sign."
Strange part is some of my colleagues here doesnt have any issue while opening the Integeration Builder. In fact I dont have any such issue in QA and PROD environment. The issue is only in DEV environment. Please advice.
AnshulHello,
Usually restoring the archives will help resolve the issue.
If the issue is occurring for just yourself maybe you could check that you are using the correct java version. e.g. for for 7. 1 java version 5
Also please refresh the Java Web Start:
If it's a Windows terminal, select Start - Run - javaws to launch Java Web Start and then clear the cache. File -> preferences ->
advanced -> clear folder button
If you have later versions of Java and doing the
Start -> Run doesn't give you anything, then select Start - Run and type Control and hit Enter. Double-click Java in the list
that displays to view the more up-to-date Java Control Panel. In the General tab, select Settings from the Temporary Internet Files section. Click Delete Files to clear the cache and then log into the Integration Builder again (download will be longer as jars will be cached locally again).
If the problem still remains I would advise to check that the latest patches have been applied for XI_TOOL, and also the other components MESSAGING SAP-XIAFC SAP_XIAF SAP_XIESR SAP_XIGUI
Regards,
Sarah -
Problems with starting the Integration Builder
Dear all
We've installed PI 7.0 as a part of a project, and have some consultants working in the integration builder and rwb.
Recently the we are unable to start the Integration Builder, and we get an error message prompting: "Unable to launch the application"
The Builder has worked flawlessly earlier, and the problem have suddenly appeared during the last week.
The Java error is:
com.sun.deploy.net.FailedDownloadException: Unable to load resource: http://<serveradress>:<port>/dir/directory/iaik_jsse.jar
at com.sun.deploy.net.DownloadEngine.actionDownload(Unknown Source)
at com.sun.deploy.net.DownloadEngine.getCacheEntry(Unknown Source)
at com.sun.deploy.net.DownloadEngine.getResourceCacheEntry(Unknown Source)
at com.sun.deploy.net.DownloadEngine.getResourceCacheEntry(Unknown Source)
at com.sun.deploy.net.DownloadEngine.getResource(Unknown Source)
at com.sun.javaws.LaunchDownload.downloadJarFiles(Unknown Source)
at com.sun.javaws.LaunchDownload.downloadEagerorAll(Unknown Source)
at com.sun.javaws.Launcher.downloadResources(Unknown Source)
at com.sun.javaws.Launcher.prepareLaunchFile(Unknown Source)
at com.sun.javaws.Launcher.prepareToLaunch(Unknown Source)
at com.sun.javaws.Launcher.launch(Unknown Source)
at com.sun.javaws.Main.launchApp(Unknown Source)
at com.sun.javaws.Main.continueInSecureThread(Unknown Source)
at com.sun.javaws.Main$1.run(Unknown Source)
at java.lang.Thread.run(Unknown Source)
java.io.FileNotFoundException: http://<serveradress>:<port>/dir/directory/iaik_jsse.jar
at sun.reflect.GeneratedConstructorAccessor2.newInstance(Unknown Source)
at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(Unknown Source)
at java.lang.reflect.Constructor.newInstance(Unknown Source)
at sun.net.www.protocol.http.HttpURLConnection$6.run(Unknown Source)
at java.security.AccessController.doPrivileged(Native Method)
at sun.net.www.protocol.http.HttpURLConnection.getChainedException(Unknown Source)
at sun.net.www.protocol.http.HttpURLConnection.getInputStream(Unknown Source)
at com.sun.deploy.net.BasicHttpRequest.doRequest(Unknown Source)
at com.sun.deploy.net.BasicHttpRequest.doRequest(Unknown Source)
at com.sun.deploy.net.BasicHttpRequest.doGetRequest(Unknown Source)
at com.sun.deploy.net.DownloadEngine.actionDownload(Unknown Source)
at com.sun.deploy.net.DownloadEngine.getCacheEntry(Unknown Source)
at com.sun.deploy.net.DownloadEngine.getResourceCacheEntry(Unknown Source)
at com.sun.deploy.net.DownloadEngine.getResourceCacheEntry(Unknown Source)
at com.sun.deploy.net.DownloadEngine.getResource(Unknown Source)
at com.sun.javaws.LaunchDownload.downloadJarFiles(Unknown Source)
at com.sun.javaws.LaunchDownload.downloadEagerorAll(Unknown Source)
at com.sun.javaws.Launcher.downloadResources(Unknown Source)
at com.sun.javaws.Launcher.prepareLaunchFile(Unknown Source)
at com.sun.javaws.Launcher.prepareToLaunch(Unknown Source)
at com.sun.javaws.Launcher.launch(Unknown Source)
at com.sun.javaws.Main.launchApp(Unknown Source)
at com.sun.javaws.Main.continueInSecureThread(Unknown Source)
at com.sun.javaws.Main$1.run(Unknown Source)
at java.lang.Thread.run(Unknown Source)
Caused by: java.io.FileNotFoundException: <serveradress>:<port>/dir/directory/iaik_jsse.jar
at sun.net.www.protocol.http.HttpURLConnection.getInputStream(Unknown Source)
at java.net.HttpURLConnection.getResponseCode(Unknown Source)
... 18 more
Does anyone have a clue or answer to this strange problem?
Regards
AndreasHi,
Refer this thread;
Unable to Open Integration Builder
https://www.sdn.sap.com/sdn/weblogs.sdn?blog=/pub/wlg/1688 [original link is broken] [original link is broken] [original link is broken]
Regards,
Nithiyanandam
Maybe you are looking for
-
How to use sap BI in sap ECC 6.0 system?
Hello frients, we Having sap ECC6.0 IDES system and we want to use this system for sap BI also. In SAINT - add ons and preconfigured systems installed in the system area{SAP_BW is there)... SAP_BW 700 0009 SAP NetWeaver BI 7.0 000
-
In our application we have CV Builder and after submit we want to show in pdf format. and also we want save and send option.
-
Sign in has failed. Network failure.
Hi All, We are half way through updating an iPad issue and after rebooting because the upload was hanging in the Folio Builder we cannot log in due to network failure. Cannot sign into https://digitalpublishing.acrobat.com either under any log in. ht
-
Just Updated to 3.0 but I dont' have a iTunes app anymore
I just upgraded to the 3.0 version, and all my apps are gone. I really dont' care about that.... but I don't know why I don't have the iTunes App....i use that to download all my music. Someone please help me get it back.
-
Predicate boolean method...calculating whether or not a year is a Leap year
I'm trying to get pointed in the right direction for this program. I am attempting to write a program that calculates whether or not an inputted year by the user is a valid leap year or not, however I'm having problems figuring out the method for thi