Launch Monitoring & Report Viewer URL

Hi,
is there a way to change the URL of Launch Monitoring & Report Viewer? I want to use the IP address of the ACS 5.2 and not the hostname.
thank you
Fabrizio

HI Sebastian,
What operating system and broswer are you using? Please note the following OS/Browser combinations are supported by ACS 5.1.
Supported Web Client/Browser Platforms
ACS 5.1 supports the following Web Client/Browser Platforms:
•Windows XP Professional (Service Pack 2) and Windows Vista
–Internet Explorer version 6.x
–Internet Explorer version 7.x
–Mozilla Firefox version 3.x
•MAC OS 10.5
–Mozilla Firefox version 3.x
•Linux ReaHat (latest version)
–Mozilla FireFox version 3.x
http://www.cisco.com/en/US/partner/docs/net_mgmt/cisco_secure_access_control_system/5.1/device_support/sdt51.html#wp73725
Regards,
Steve.

Similar Messages

  • ACS 5.1 "Launch Monitoring & Report Viewer" not working

    I'm trying to view the logs on the ACS server via the web interface.  When I click on "Launch Monitoring & Report Viewer", it opens a new window and I get the error "cannot display the webpage".  This happens on both Firefox and IE.  The URL it's trying to load is this:  https://x.x.x.x/acsadmin/ReportsRedirectorAction.do
    These are relatively new boxes so I don't know if I missed some config bit somewhere to enable that utility or what.
    Any insight would be appreciated.
    Thanks,

    I had the issue in ACS 5.1 no patch and it was fixed after reboot and after applying patch three it didnt showed up. The only difference is i had a standalone ACS.Who is the log collector in your setup?
    Let me know if you can apply patch here is the link for that :
    http://www.cisco.com/cisco/software/release.html?mdfid=282773289&flowid=4409&softwareid=282766937&release=5.1.0.44&rellifecycle=&relind=AVAILABLE&reltype=latest
    here is the procedure to apply patch 3 ( on both primary and secondary)
    downlaod the file : 5-1-0-44-3.tar.gpg
    and place the file in the FTP server in your enviroment
    Login to the ACS CLI :
    Create a repository:
    acs/admin(config)# repository myrepository
    acs/admin(config-Repository)# url sftp://starwars.test.com/repository/system1
    acs/admin(config-Repository)# user luke password skywalker
    acs/admin(config-Repository)# exit
    then run this command :
    acs patch install patch-name.tar.gpg repository repository-name
    #Installing an ACS patch requires a restart of ACS services.
    Would you like to continue? yes/no
    Thanks
    Waris Hussain.

  • It's dos't work Launch Monitoring & Report Viewer

    It doesn't work "Launch Monitoring & Report Viewer"
    If i click Launch Monitoring & Report Viewer" , that 's show up " The monitoring and reports database is currently unavailable. Attempting to reconnect in 5 seconds.  If problem persists, please contact your ACS administrator " this message...
    where do i check on ACS 5.0 ?
    Regards
    Gangmo.

    ooooops..
    reload the acs.. and database process is on..
    It work well ....
    Thanks...

  • Cannot launch Monitoring & Report Viewer

    Hi everybody,
    i just installed ACS 5.1.0.44 with the latest Patch on a VMWare virtual machine and installed the evaluation license.
    Everything works fine except for the "Monitoring & Report Viewer"-Tab:
    When i try to launch the Viewer, it opens a new browser-window/tab, which then again opens another (the same) window/tab, and so on and on. So there would be an infinite number of windows/tabs, if i wouldn't close them all real quickly. Same problem with any client and any browser.
    I already deinstalled ACS 5.1 and tried ACS 5.2 on the same machine -> same problem.
    Am i missing something? Did anybody experience the same issue?
    Thanks in advance,
    Sebastian Jessulat

    HI Sebastian,
    What operating system and broswer are you using? Please note the following OS/Browser combinations are supported by ACS 5.1.
    Supported Web Client/Browser Platforms
    ACS 5.1 supports the following Web Client/Browser Platforms:
    •Windows XP Professional (Service Pack 2) and Windows Vista
    –Internet Explorer version 6.x
    –Internet Explorer version 7.x
    –Mozilla Firefox version 3.x
    •MAC OS 10.5
    –Mozilla Firefox version 3.x
    •Linux ReaHat (latest version)
    –Mozilla FireFox version 3.x
    http://www.cisco.com/en/US/partner/docs/net_mgmt/cisco_secure_access_control_system/5.1/device_support/sdt51.html#wp73725
    Regards,
    Steve.

  • Deploy Monitoring reports Fail Cannot get the ReportServerWebService URL

    Hi, I am deploying the monitoring reports in a single host different to FE or Backend
    When I launch the wizard the installation fail with the message:
    > Deploying Monitoring Reports... This might take a few minutes.
    The Monitoring Database is using SQL instance "mendbsql3\ARCHLYNC2013".
    The data source is using SQL instance "(local)\ARCHLYNC2013".
    System.Runtime.InteropServices.COMException (0x800700A4)   at System.Runtime.InteropServices.Marshal.ThrowExceptionForHRInternal(Int32 errorCode, IntPtr
    errorInfo)   at System.Management.ManagementObjectCollection.ManagementObjectEnumerator.MoveNext()   at Microsoft.PowerShell.Commands.GetWmiObjectCommand.BeginProcessing()System.Runtime.InteropServices.COMException (0x800700A4)  
    at System.Runtime.InteropServices.Marshal.ThrowExceptionForHRInternal(Int32 errorCode, IntPtr errorInfo)   at System.Management.ManagementObjectCollection.ManagementObjectEnumerator.MoveNext()   at Microsoft.PowerShell.Commands.GetWmiObjectCommand.BeginProcessing()System.Runtime.InteropServices.COMException
    (0x800700A4)   at System.Runtime.InteropServices.Marshal.ThrowExceptionForHRInternal(Int32 errorCode, IntPtr errorInfo)   at System.Management.ManagementObjectCollection.ManagementObjectEnumerator.MoveNext()   at Microsoft.PowerShell.Commands.GetWmiObjectCommand.BeginProcessing()System.Runtime.InteropServices.COMException
    (0x800700A4)   at System.Runtime.InteropServices.Marshal.ThrowExceptionForHRInternal(Int32 errorCode, IntPtr errorInfo)   at System.Management.ManagementObjectCollection.ManagementObjectEnumerator.MoveNext()   at Microsoft.PowerShell.Commands.GetWmiObjectCommand.BeginProcessing()System.Runtime.InteropServices.COMException
    (0x800700A4)   at System.Runtime.InteropServices.Marshal.ThrowExceptionForHRInternal(Int32 errorCode, IntPtr errorInfo)   at System.Management.ManagementObjectCollection.ManagementObjectEnumerator.MoveNext()   at Microsoft.PowerShell.Commands.GetWmiObjectCommand.BeginProcessing()Cannot
    get the ReportServerWebService URL. Verify that Reporting Services is deployed and configured properly on the target SQL instance:"mendbsql3\ARCHLYNC2013", and that WMI is included on the exception list of firewall setting on the server that is running
    Reporting Services.
    I check the configuration of the reporting services configuration, all see OK. I probe the URL in the server that I want to configure like a monitoring reporter
    and I can explorer and administrate the Reporting Services. The firewall into the servers is off.
    Somebody else have this problem.
    THX.

    Hi Lapatinogo
    This is how I install Monitoring in my lab series.
    http://lyncme.co.uk/microsoft-lync-server-2013/the-complete-home-lync-lab-part-3-installing-lync-2013-monitoring-and-lync-edge-server/
    Navigate –> Lync Server –> Your Site –>
    Lync Server 2013 –> Standard Edition Front End Servers –>
    Your Server
    Right Click –> Edit Properties –> Scroll Down to Monitoring
    Tick Monitoring –> Press New –> Enter your
    SQL Server FQDN –> Specify your instance –> Untick
    This SQL instance is in mirroring relation (As stated in Part 1 you should already have a SQL Server with an instance available) –> Press
    OK
    Press OK –> Press Action –> Press
    Topology –> Press Publish
    Press Next
    Press Next –> This should complete successfully –> Press
    Finish
    Launch Lync Deployment Wizard
    Press Yes –> Click Deploy Monitoring Reports
    Press Next
    Press Specify a User Account and Password that has rights to the instance –> Press Next
    Press Specify User Group (I will be using the default group) –> Press
    Next
    Press Finish
    Launch the Lync Server Control Panel
    Login with an account that is apart of the CSAdministrator
    Click View Monitoring reports –> Click your SQL Server FQDN
    You should now see the below window   Successful deployment of Lync Monitoring

  • QSUF (Query string url filter) and SQL Server reporting services report viewer parameters

    Hi,
    this is my issue:
    I have a SQL Server reporting services web part on a page with a report with 1 parameter, lets say it's a client list
    Then i have a QSUF that will be used to filter the clients list through the URL
    However, once i connect the filter and the report viewer web part, the parameter goes away and is no longer accessible
    I'd like to somehow keep the parameter visible, in case there is no parameter sent through the URL, i would like the user to be able to choose a client from the parameter drop down list
    I saw that there is a "send empty if no values are passed" option, but i can't seem to get this working properly and i don't know if this option will make the parameter visible again
    Any help would be appreciated
    Thanks.

    Hi,
    According to your post, my understanding is that the query string url filter web part not worked well with SQL server reproting services web part.
    Did you use the Wiki page layout in your environment?
    You can change the page to a web part page, then check whether it work.
    There is a similar thread for your reference.
    http://social.msdn.microsoft.com/Forums/sharepoint/en-US/4d7584e3-8e1a-48bf-9346-32f8cb480dd1/query-string-url-filter-web-part?forum=sharepointgeneralprevious
    Thanks & Regards,
    Jason
    Jason Guo
    TechNet Community Support

  • Cisco Secure ACS 5.4/Monitoring and Report Viewer - SNMP Settings

    Hello Everyone.
    I hope this is the right forum for my question.
    We just purchased 8 1121 ACS 5.4 appliances. I have some familiarity with the older 1113 and 1120 appliances running ACS 4.2. So I have a lot to learn.
    Right now I'm trying to understand the Monitoring and Report Viewer System Configuration. I set the SNMP V2 read comm. string to the same string I configured from the CLI.
    etc-labacsb1-1/admin# show runn | inc snmp
    snmp-server contact "ACS1121;XXXXX"
    snmp-server location "B1 Lab"
    snmp-server community XXXXXX ro
    1) It was not the same string as configured on CLI. Does setting this give me access to query more than system type or server type MIB objects.
    2) Can you provide an example? (for example to query a switch -  snmpwalk -v 1 -c XXXXXX hostname 1.3.6.1.4.1.9.9.43)
    3) What is the MIB object tree OID (1.3.6.1.4.1.9.???) for these ACS appliances?
    Thanks in advance.
    Ray Westphal
    EHI

    that's correct. here is what we have in ACS 5.4 for snmp.
    ACS 5.4 supports Simple Network Management Protocol (SNMP) to provide logging services. The SNMP agent provides read-only SNMPv1 and SNMPv2c support. The supported MIBs include:
    •SNMPv2-MIB
    •RFC1213-MIB (MIB II)
    •IF-MIB
    •IP-MIB
    •TCP-MIB
    •UDP-MIB
    •CISCO-CDP-MIB
    •ENTITY-MIB
    http://www.cisco.com/en/US/docs/net_mgmt/cisco_secure_access_control_system/5.4/device_support/sdt54.html#wp71020
    ~BR
    Jatin Katyal
    **Do rate helpful posts**

  • Pass current url as report prarameter while using report viewer web part

    hello everybody
    is there a way to
    pass current url as report prarameter while using report viewer web part
    thanks in advance
    Sergey Vdovin

    Hi Evolex,
    Per my understanding that you want to get the current url and create an parameter to add this URL as its value, right?
    gernerally, we can use some code to get the current url but it almost impossible for us to get it automatically as value of the report parameter.
    In your senario, i suggest you to copy the url and specify values when creating parameters.
    Thanks for your understanding.
    Regards
    Vicky Liu
    If you have any feedback on our support, please click
    here.
    Vicky Liu
    TechNet Community Support

  • Launching public APEX report using URL ...

    Greetings:
    I simply want to launch a public APEX report from other non-APEX applications. However, I'm having a difficult time formulating the url when there are parameters involved.
    This simple URL works fine:
    http://dqapps40:8091/pls/apex/f?p=108:1
    to launch the report, but if I want to include parameters which may or may not include values, i cant seem to get it to work. What format do I use to include the parameter list? Here are the parameters:
    P1_EMPLOYEES,P1_ORG_LOV,P1_SELECT_ACTIVE_APPROVERS,P1_ACTIVE_INACTIVE_ORGS:%2C32%25%2CACTIVE_ONLY%2CACTIVE_ONLY
    Here is the full URL when run from within APEX developer:
    http://dqapps40:8091:8091/pls/apex/f?p=108:1:1758355683409943::NO::P1_EMPLOYEES,P1_ORG_LOV,P1_SELECT_ACTIVE_APPROVERS,P1_ACTIVE_INACTIVE_ORGS:%2C32%25%2CACTIVE_ONLY%2CACTIVE_ONLY
    Any help would be great.
    Thanks,
    Stan

    Stan:
    The APEX URL syntax is detailed here
    http://download.oracle.com/docs/cd/E14373_01/appdev.32/e11838/concept.htm#BCEDJBEH
    Varad

  • Customizing the Monitoring and Report Viewer - ACS 5.2

    Is there a way to modify the columns shown in the monitoring and reporting viewer so that I can see all of the relevant columns in one screen, similar to the ACS 4.x view?  I would like to view things at a glance, rather than having to click into each item.  Thank you for your help in advance.

    that's correct. here is what we have in ACS 5.4 for snmp.
    ACS 5.4 supports Simple Network Management Protocol (SNMP) to provide logging services. The SNMP agent provides read-only SNMPv1 and SNMPv2c support. The supported MIBs include:
    •SNMPv2-MIB
    •RFC1213-MIB (MIB II)
    •IF-MIB
    •IP-MIB
    •TCP-MIB
    •UDP-MIB
    •CISCO-CDP-MIB
    •ENTITY-MIB
    http://www.cisco.com/en/US/docs/net_mgmt/cisco_secure_access_control_system/5.4/device_support/sdt54.html#wp71020
    ~BR
    Jatin Katyal
    **Do rate helpful posts**

  • Problem with Crystal Report Viewer and Dual Monitors

    Post Author: jtgoff
    CA Forum: .NET
    Hey Guys,
    I'm running into another problem with the Crystal Report Viewer. Here's a little info before I get started, I'm developing a Windows App using WinForms in VS2005 and Crystal 11 Release 2. I'm referencing all the latest Crystal dlls from Service Pack 2 of Crystal 11 Release 2. The problem occurs when I drag my Windows Form that contains a Crystal Report Viewer onto my second monitor and try to scroll or resize it, when I try this the Report Document within the Viewer becomes glitchy, blocky, and un-readable. I drag it back onto my main monitor and perform the same actions and the Report appears perfectly fine. I notice this occurs after a number of Report Previews through my App. Initially when I start my App, I can drag the reports onto my second monitor and resize it and scroll through it no problem. However, after a number of Previews, I notice the problem occurs on my second monitor. This is a very strange bug that doesn't produce an error and appears to happen randomly. I was wondering if anyone has come across this problem, if so... Is there a solution for this?
    Thanks in advance!

    You can update the parameters using Crystal Viewer 2008. I had the same problem with the "CHANGE" button being grayed out.
    Go to your Report -> Select Expert -> and now you have three choices: Record, Group, Saved Data. Put your select statement using your parameters in the Saved Data only (remove it from Record if already there).
    It works awesome and even works on dynamic parameters!

  • Only showing APP monitoring Reports in SCOM 2012 Reporting

    Hi all,
    Recently i upgrade the SCOM 2012 from 2007 R2 Managament Server only because in previous environment we have only one MS server and SQL server 2008 SP2.
    Now i have 4 servers for SCOM 2012.
    1) SCOM Managament server (which was upgraded)
    2) SQL server 2008 SP2 (running 3 instances)
    3) SCOM ACS server (New installation)
    4) SCOM Reporting server (New installation)
    I have using two accounts
    1) SCOM.action 2) SCOM.sdk
    When i install reporting, reporting Tab are showing in the SCOM 
    2012 console but only Application monitoring reports are showing in Reporting. I was deleted some MP’s and then import it but the report are not imported in reporting tab. I also check SSRS, it works fine. Both SSRS url’s works fine.
    I don’t know whats the problem.. Please clarify me what’s the problem.????
    Regards,
    Kamran

    Hi Muhammad,
    I am also facing the exact issue as expalined above.
    Even the application monitroing reports are not working. When i try to launch application monitoring reports from reportmanger , I get dataset error and see that apm.* views are missing.
    Also tried deleting and importing the managementpacks, without any success. This issue is happening only in production environment.
    It will be very helpful if you can let us know what Account permisisons need to be checked for. Thanks in advance.
    Thanks

  • Report viewer page showing in ActiveX Mode

    In CMC or Infoview, we are able to set viewing option to DHTML, ActiveX, Advanced DHTML & so on.
    I need to code a viewer page which able display reports in ActiveX mode.
    What I did:
    1) I have set the viewing preferences to ActiveX from CMC
    2) using the sample codes which uses com.crystaldecisions.report.web.viewer.CrystalReportViewer
    3) I have searched and checked the API for any method to set the view mode to ActiveX (but can't find any).
    4) I have set the print mode to ActiveX
    Result:
    1) My viewer page still showing reports in HTML mode.
    2) But my reports are showing in ActiveX mode in CMC report preview and InfoView.\
    Any one has the code sample or solution?! I need some guides here...

    The CrystalReportViewer class is the DHTML viewer, and there's no way to invoke the ActiveX viewer through it.
    The ActiveX viewer is a client-side component, that needs to launch and communicate back to a web-app-server-side component, that mediates communication with Enterprise.
    Enterprise web apps has such a server-side component, but no public API does. 
    The RAS report viewer sample you're referring to does contain such a component - it essentially mediates the communication between the RAS server and the ActiveX viewer - however, it's only been written against Version 10, and it's only available as a classic ASP page using COM libraries, and not Java.
    The only public way to get the ActiveX viewer is using URL Reporting.
    Sincerely,
    Ted Ueda

  • Crystal Report Viewer and Windows Vista

    Hi,
    We are using RDC methodology for launching the crystal reports in the web using ASP.
    The web server operating system is Windows 2003, Crystal Reports XI is installed in it.  Report is not launching in only one client machine.  For all the other client machines reports are launching perfectly.  The problem is blank white activex control is displayed.  I tried to register the crystal reports viewer (ActiveXViewer.cab available in the crystal installation folder) deliverables in the client machine but after installing the deliverables same problem persists.
    When I click on the Crystal Report viewer Internet Explorer Exception occurs
    The following add-on was running when this problem occurred:
    Add-on Name:      CRViewer.dll
    Company Name:      (Not verified)Business objects
    Description:                           Crystal Report Viewer
    Two buttons
    Advanced... and Continue are shown but when we click on the button IE crashes
    The client machine operating system is u201CWindows Vistau201D service pack 2
    Internet Explorer 7 version is installed in it.
    In the client machine event viewer log the following details are available.
    Log Name:      Application
    Source:        Application Error
    Date:          10/29/2010 9:18:35 AM
    Event ID:      1000
    Task Category: (100)
    Level:         Error
    Keywords:      Classic
    User:          N/A
    Computer:      BillVista.toyalloc.local
    Description:
    Faulting application iexplore.exe, version 7.0.6002.18005, time stamp 0x49e01e78, faulting module CRViewer.dll, version 11.0.0.893, time stamp 0x41b6ac85, exception code 0xc0000005, fault offset 0x0001f8e7, process id 0x210, application start time 0x01cb7773d2b1c584.
    Event Xml:
    <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
      <System>
        <Provider Name="Application Error" />
        <EventID Qualifiers="0">1000</EventID>
        <Level>2</Level>
        <Task>100</Task>
        <Keywords>0x80000000000000</Keywords>
        <TimeCreated SystemTime="2010-10-29T14:18:35.000Z" />
        <EventRecordID>98684</EventRecordID>
        <Channel>Application</Channel>
        <Computer>BillVista.toyalloc.local</Computer>
        <Security />
      </System>
      <EventData>
        <Data>iexplore.exe</Data>
        <Data>7.0.6002.18005</Data>
        <Data>49e01e78</Data>
        <Data>CRViewer.dll</Data>
        <Data>11.0.0.893</Data>
        <Data>41b6ac85</Data>
        <Data>c0000005</Data>
        <Data>0001f8e7</Data>
        <Data>210</Data>
        <Data>01cb7773d2b1c584</Data>
      </EventData>
    </Event>
    Could any one help me regarding this.

    Hello,
    First thing to do is upgrade to [CR XI R2 SP4 full build|https://smpdl.sap-ag.de/~sapidp/012002523100011802732008E/crxir2_sp4_full_build.exe]. Then get up to Service Pack 6 and you should not have problems with Vista.
    CR XI R1 will not and has never been tested on that OS.
    If you do not want to upgrade though use Process Monitor to watch for Access Denied errors. Also run IE in Compatibility mode.
    Likely what is happening is your test PC doesn't have rights to install ActiveX controls.
    Thank you
    Don

  • Dynamic command execution fails in Crystal report viewer for parameters

    We are using the Crystal Report Viewer for the .Net Application on the client side.The reports are designed using Crystal Report XI R2.
    The issues that we are currently encountering is that, we are unable to load the combo-boxes in the pop-up for the parameters.
    All the reports have multiple commands and the variables are of 'dynamic' type.
    When the dialog box for requesting the pop-up comes up, It comes up empty even though they are linked to the respective commands.
    Also,For reports having multiple parameters we are unable to give a single dialog box to get in all the parameters.It appears as a series of prompts.
    Both,these issues are not encountered when the reports are launched via the Crystal reports developer tool.

    Hello Varun,
    I recommend to post this questionin the [dedicated NET forum|SAP Crystal Reports, version for Visual Studio;.
    This forum is monitored by qualified technicians and you will get a faster response there.
    Thank you for your understanding,
    Falk

Maybe you are looking for