Launch workflow in user form after updating attributes

Hello,
When I launch a workflow in my activeSync user form, attributes are not updated if there are changes for the account.
I launch the worfklow as described below:
                <Field name='viewOptions.Process'>
                    <Comments> Workflow</Comments>
                    <Expansion>
                        <s>DeleteAccounts</s>
                    </Expansion>
                </Field>Is it possible in a first time to update attributes and then to launch the workflow ?
Thanks,
Nicolas

Are the attributes changing because of changes through role assignments? I think those changes happen during check-in. (Maybe in a reprovision, too: I haven't tried.)
My instructor said he has seen times after activeSync is run that, if you edit the user, additional attribute changes finally go through. He didn't elaborate on when it happens. I've seen it, but for reasons that aren't relevant in this discussions, I haven't had to deal with it yet.
Anyway, he recommended setting viewOptions.Process to something that does an extra check-out/in (or in/out?) to handle that situation. You might want to add a check-in/out to your workflow before you do your other processing...

Similar Messages

User-exit after updating PO from Order response ?

Hi All,
We are looking for a user-exit after the Purchase order is updated from an order response.
With this user-exit we would like to trigger a WF to the user to carry out transaction YE22N, with the WF the user(PO creator) can execute and update the PO.
Any feedback, tips would be helpfull and for sure points reward.
Thanks & Regards,
Nameeth

Hi Anand,
Sorry for the confusion., try to explain here.
During the updation of PO from inbound ORDSP IDoc, we have a transaction YE22N to confirm if the changes in ORDSP is accepted or not.
So we would like to automate this so that after the PO is update/saved from ORDSP IDoc, then we can trigger a workflow to send email to the PO creator.
If its still confusing then, "I would like to know if there is a user-exit or if Workflow can be triggered after updating PO" ?
Regards,
Nameeth

How can I to resolve a write protected form after updating the form?

The following error is displayed after updating a form “Any changes made to this form cannot be saved.” These are the steps taken to update the form:
1)      Move form to Workbench ES Resources.
2)      Point Variables to new form
3)      Invoke process
The updated form is posted on Workspace. LAN users can make changes and submit the form, but WAN users get the error above and cannot make any changes.
Thanks,

You need to know that "USB Key" technology may not be appropriate for a system disk. Check out "wear leveling" on Wikipedia for a sobering discussion of the service life of solid-state drives. Also read "solid-state drives" (Ibid.) for a detailed comparison with hard disk technology.
--Gil

ERROR 404 ON BOOKMARK LINK FOR USER GUIDE AFTER UPDATE TO VERSION 6, REST OF BOOKMARKS WORK FINE, ERROR 404 ON BOOKMARK LINK FOR USER GUIDE AFTER UPDATE TO VERSION 6, REST OF BOOKMARKS WORK FINE

Received a 404 erorr on accessing "user guide" bookmark in safari after updating new ios to 6, rest of bookmars work fine. What is the address to the user guide for iphone 4s with ios 6 ? Thanks

To BradKY...
No, this link is not fixed. It still comes up as "web page not found" (error 404). The ErrMsg comes on my 3gs iPhone bookmark for the "iPhone User Guide" -- which worked just fine prior to the upgrade to iOS 6 -- also this is a dead link via computer. The bookmark link is as follows: http://help.apple.com/iphone/6/ -- "The requested URL /apps/mobile/2.0/ was not found on this server -- Apache/2.2.3 (PU_IAS) Server at help.apple.com Port 80"
Thanks,
jgamins

Users gone after update to 10.7.5

I can not connect to Open Directory after update tp 10.7.5 Server, now my users are gone.
Error : The node /LDAPv3/127.0.0.1 couldn’t be opened because an unexpected error of type -14006 occurred.
Error of type eDSCannotAccessSession (-14006) on line 4061 of /SourceCache/WorkgroupManager/WorkgroupManager-400.8/PMMUGMainView.mm

Time Machine and any 'previous version' of my VM did NOT solve the problem.
However, VMWARE Snapshots restored my server to a working state again.
This forum is all well and fine ! Users discussing problems amongst themselves and often finding solutions.
How does one send such a question to an Apple Technician to get an official answer on a thing that their update broke without having to pay exorbitantly for THEIR stuff-up ?

Cannot launch itunes in windows 7 after updating to latest version

After Upgrading to Itunes 11.1.5.5 on Windows 7 64 bit Itunes is not launching, tried to start up in safemode no luck, any suggestions greatly appreciated.

No Error Message, Nothing happens,
Many thanks.
Doublechecking. Have you worked through the further steps from the following document? (Determining whether or not the error is user-account specific or systemwide, and then moving on to the user-specific or systemwide general troubleshooting procedures depending on whether or not iTunes launches in the other user account?)
iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues

Problems with Submitting a Adobe Livecycle Designer 8.0 created Form after Update to Adobe Prof. 8.1

Hi folks,
can someone tell me, which problem is it? Forms created in Livecycle Designer 8.0 with Adobe Prof. 8.0 don't have problem with submitting, but with Adobe Prof. 8.1.
Thanks for help or information in adv!

Hello Mr Aandi Inston,
thanks for your quick answer! My problem is the following: The functionality email submitting in Livecycle 8.0 created form under Adobe Prof. 8.1 is malfunction when you open the form in Adobe Reader 8.x. There are non error messages to able to locate the problem. When you click the submit button, nothing is happen. Forms created before update adobe prof. 8.0 to 8.1 didn't have problem like this.
Normally, after clicking submit button ms outlook popup with suitable subject, attachment and so on. Executing the form in Adobe Prof. you wont have problem to submit form per email. Now I suppose that this problem is caused by updating???
Why do I claim it? After failed testing the modified form based on dynamic interactive template form "Purchase Order.pdf" from Designer 8.0 under different windows os and ms office versions I tried to test the above-named template, the same problem you will get: email submitting is malfunction!
I hope, my description will be detailed enough to you and I'm glad to hearing from you soon!

HDMI TV launcher and Camera quality issue after update to android 4.0.4

Hello ,
I've bought a Xperia S LT26i with android 2.3.7 ,all went ok ,camera worked ok ,HDMI and tv launcher no issue.
After i've made a OTA upgrade to Android 4.0.4 6.1.A.2.55.
Now after this update ,TV Launcher over HDMI does not work anymore and all potos from camera dooring day time or night have lots of noise.
Also in video mode ,is the same ,using any kind of settings from camera ,dose not doo any kind of noise reduction.
Any idea how i can fix this maybe ?

I suggest that you try to run a software reinstall using SUS.
http://www.sonymobile.com/gb/tools/update-service/
If the problem still remains you should contact your local support team, to have the phone examined and fixed at an repair center.
http://www.sonymobile.com/global-en/support/contact-us/contact-info/
- Community Manager Sony Xperia Support Forum
If you're new to our forums make sure that you have read our Discussion guidelines.
If you want to get in touch with the local support team for your country please visit our contact page.

New user called user.domain after updating from win 8.1 to win 10

I can't find any information on it at the moment but my guess would be that the profile versions have increased between 8.1 and 10 as they did between 7 and 8.1
I think I remember seeing somewhere that the profiles in Windows 10 are now v5 instead of the v4 of 8.1
Found a similar article explaining the changes from the release of 8.1/server 2012R2
https://support.microsoft.com/en-us/kb/2890783

Hi,
i will try to shortly explain the scenario:
I have removed my PC from my company's domain, in order to update my windows 8.1 pro to windows 10 pro. (i read a microsoft article telling that we are supposed not to be joined to a domain so we can do the upgrade).
so after the upgrade was done, i rejoined my pc to the domain. i logged in with my AD user, but a new profile was loaded called: user.domain
and my old profile is still in c:/users/ called user
how can i load my old profile back?
This topic first appeared in the Spiceworks Community

User unknown after Update

I updated my arch distribution and thought i could be lazy and handle the pacnew files automatically which was a bad idea.
Now i have the problem, that my user is not known to the system.
Whoami sasy: whoami: cannot find name for user ID 1000
/etc/passwd says:
root:x:0:0:root:/root:/bin/bash
bin:x:1:1:bin:/bin:/bin/false
daemon:x:2:2:daemon:/sbin:/bin/false
mail:x:8:12:mail:/var/spool/mail:/bin/false
ftp:x:14:11:ftp:/srv/ftp:/bin/false
http:x:33:33:http:/srv/http:/bin/false
nobody:x:99:99:nobody:/:/bin/false
dbus:x:81:81:System message bus:/:/bin/false
elk0:x:1000:100::/home/elk0:/bin/zsh
avahi:x:84:84:avahi:/:/bin/false
usbmux:x:140:140:usbmux user:/:/sbin/nologin
rtkit:x:133:133:RealtimeKit:/proc:/sbin/nologin
gdm:x:120:120:Gnome Display Manager:/var/lib/gdm:/sbin/nologin
ntp:x:87:87:Network Time Protocol:/var/lib/ntp:/bin/false
git:x:999:998:git daemon user:/:/bin/bash
uuidd:x:998:997::/:/sbin/nologin
mysql:x:89:89::/var/lib/mysql:/bin/false
kdm:x:135:135::/var/lib/kdm:/bin/false
polkitd:x:102:102:Policy Kit Daemon:/:/bin/false
I googled a lot but nothing worked yet (i even tried to revert to the backuped files. Now i am at the end of my linux knowledge and need help urgently.

I ran into the tex problem which is described here https://www.archlinux.org/news/texlive- … ervention/ and used pacdiff. Because i was lazy (yes shame on me, it will never happen again, hard lesson!), i just ran through the process which than has overwritten the passwd with passwd.pacnew, which has the following content:
root:x:0:0:root:/root:/bin/bash
bin:x:1:1:bin:/bin:/bin/false
daemon:x:2:2:daemon:/sbin:/bin/false
mail:x:8:12:mail:/var/spool/mail:/bin/false
ftp:x:14:11:ftp:/srv/ftp:/bin/false
http:x:33:33:http:/srv/http:/bin/false
uuidd:x:68:68:uuidd:/:/sbin/nologin
dbus:x:81:81:dbus:/:/sbin/nologin
nobody:x:99:99:nobody:/:/bin/false
As it seems now, this has also been done to the following files (backups of the old exists)
/etc/shadow
/etc/gshadow
/etc/group
So googling around someone with an similar sounding problem has resolved that by replacing the new files with the backups. So i did, but it didn't work.
Edit: pacman -Qii filesystem is giving me following List of backuped files:
UNMODIFIED /etc/fstab
UNREADABLE /etc/crypttab
UNREADABLE /etc/group
MODIFIED /etc/hosts
UNMODIFIED /etc/ld.so.conf
UNREADABLE /etc/passwd
UNREADABLE /etc/shadow
UNREADABLE /etc/gshadow
MODIFIED /etc/resolv.conf
UNMODIFIED /etc/motd
UNMODIFIED /etc/nsswitch.conf
MODIFIED /etc/shells
UNMODIFIED /etc/host.conf
UNMODIFIED /etc/securetty
MODIFIED /etc/profile
UNMODIFIED /etc/issue
Last edited by elk0 (2013-08-06 10:24:23)

Cannot acces any user account after update. Please HELP!

Hi.
Two days ago I updated my Macbook Pro to the latest version using the "Software Update" utility. It restarted and I just shut it down.
Yesterday I attempted to log to my account and I realized that it's not possible. No matter the account I try it:
1. Asks for a password (Enter password correctly).
2. A gray screen appears for one or two seconds as if it's loading the session.
3. It comes back to the accounts screen.
After many tries then I entered to the Recovery utilities ( Command + R on boot). I analized the disk and it's fine, no errors on it. So I decided to reinstall OS X
Lion again to see if it solved the problem but I simply could not achieve that.
When I try to re-install it starts to download some components and after few minutes of download it states that it cannot download these components.
I thought it was a problem with my wireless network so I plugged an ethernet cable to the mac but the same error still happens after one minute or two.
Note: I checked my network with other devices and it's working fine.
It's very frustrating not being able to enter my account but it's more the fact of cannot solve it because now the recovery components must be downloaded from internet but these components actually can't be downloaded.
I'll appreciate any suggestion. I'll take my mac to the Apple customer service but I expect they don't charge me for the repair since obviously it's a software error generated for the update Apple sent.
Thanks and regards.

Hi again.
It's been almost 20 days since I got this problem. I have the following updates:
1. After some days of service the support guys gave me back my macbook with a new install of Lion in version 10.7.2. It looked fine and I was able to log the accounts.
2. Since I needed iPhoto and the AppStore doesn't allow you to download it until you upgrade to 10.7.3 I did that. Restarted after the upgrade, nothing wrong but next day suddenly... the same problem: unable to log any account.
3. Brought my macbook again with the support guys and told them what happened. This time they took more time than the previous. They said that they were testing the OS on version 10.7.2; because last time thy were unable to test if the computer was actually working properly.
4. Five days ago I got my computer back again and the support service guy asked me to test and use it in 10.7.2 without upgrading for some days and make sure that it was an error on 10.7.3. I told him that it was very annoying to get the same error again and staying without computer for almost 2 weeks and told him that if there was a possibility of getting a new computer if the error came again, but looked like he didn't liked much the idea.
5. Just two days it took to get the same problem again; even without upgrading. I really don't know what would be the issue, since the OS has been reinstalled twice. I'm really desperated; I bought a mac to avoid problems and I'm getting the oterwise. I will ask the service guy to replace my computer with another but I think he will refuse and try to repair it AGAIN. I have almost 20 days without computer, and I really depend on it to do some conferences and remote work; I have been requesting a borrowed laptop in the meantime.
Do you think I have the right of asking a new computer instead of wasting more time with temporary fixes? Could I get an approval of an Apple representative in order to show the approval to the support service guys and get another computer?
Hope someone could guide me on what to do.
Thanks in advance for reading this long post.

Why can't I launch premier, photoshop or fireworks after updating?

I'm on a trial, one that I'm very excited for as I'm starting a new business and this software bundle seemed a perfect fit.
After installing and opening once it seems I'm not allowed to open aGain?
I hadn't even driven Premier. I opened and closed after looking at the dashboard. Photoshop I only updated?
Mike

Djgmichael69 your inquiry is not completely understandable but it appears that you are facing problems opening Photoshop, Premiere Pro, and Fireworks. Is this correct?
If so then I would recommend posting to each of those respective forums. Please make sure to include relevant details such as which operating system you are using and any applicable error messages.

Add display field into form after updating database

I have a form generated, then add fields into database. Other than re-create the form, are there any other way to add the addition field into the form ?

K,
You'll find answers to most of the basic questions in the user guide, http://download-west.oracle.com/docs/cd/B13789_01/appdev.101/b10992/toc.htm. Let us know if you have specific questions that aren't addressed in there.
Scott

Problem with user forms

hi guys,
i crearted a user form with Xml,[ which having fields as
nameof emp , emp id , emp dept , emp sal (labels)
and i added edit text boxes relate to that lables & buttons like add,update,ok ]so this is my form and problem is .......if i enter data in edit textboxes it may not added to the database table.SO I WANT TO ADD DATA TO DB TABLE THROUGH USER FORMS AND UPDATE ALSO.can u plz send some suggestions and code samples how to procede .
Than'Q'

Hi srinivas chowdary
You must decide on whether you would like a form that has it's own series (doc numbering) like SAP marketing document. If you want that then you must use User defined Object. (UDO) It will do the numbering and adding of records for you, also the updates it will do for you.
If not then you will have to control all entries into the db and build the whole functionality yourself.
Look at samples that come with sdk installation in your sap directory.
Hope this helps

Updating AD Attributes via OIM user forms

Hi,
I have configured an AD connector. Firstly, I did a trusted recon to create the OIM. Next, I did a user recon to link the AD user to the OIM user. After that I have configured to pre-populate to show the AD attributes onto the OIM user form.
Now, what I want to do is to update the AD attributes (eg. Mobile) in the OIM web interface, and has it reflect back to AD.
Appreciate a detail description as I am very new to OIM.
Cheers, SK

You may want to try this:
a. Add an entry in Lookup.USR_PROCESS_TRIGGERS
b. Add a Process Form field and a Process task in each Process where you want to push the value.
The task should have a name "<UDF label> Updated"
c. Create another one called "Change <UDF label>"
d. Make the tasks conditional, "allow multiple instances"
e. Wire the "Change <UDF label>" to copy values from the user profile to the process form
f. Wire the "<UDF Label> Updated" to the connector adapter.
--Deepak

Launch workflow in user form after updating attributes

Similar Messages

Maybe you are looking for