Launching Adobe Premiere Elements 9 after using Firefox 3.6.13 causes PRE9 timeline to misfunction (go black).

If Firefox has been run since machine booted then when running PRE9, moving a clip in the timeline results in the timeline region going black. When mouse released the selected track reappears, hovering mouse over vertical scroll bar area makes it visible, scrolling results in entire timeline to refresh.
This could be a Java VM problem, as problem persists until machine rebooted. Closing Firefox does not clear problem.
Replicating process using Open Office, another Java app does not cause a problem.

If Firefox has been run since machine booted then when running PRE9, moving a clip in the timeline results in the timeline region going black. When mouse released the selected track reappears, hovering mouse over vertical scroll bar area makes it visible, scrolling results in entire timeline to refresh.
This could be a Java VM problem, as problem persists until machine rebooted. Closing Firefox does not clear problem.
Replicating process using Open Office, another Java app does not cause a problem.

Similar Messages

  • Problem with Adobe Premiere Elements 12 using Scary Halloween template

    I'm having a problem with Adobe Premiere Elements 12 using Scary Halloween template under Menu Theme.  My problem is the red line is default to Scenes.  I would like it to default to Play.  How can I do that? Is it a bug?
    Side Note:  Other template default to Play Movie
    Thanks

    jeffrey caban
    No bug. Just the way the .psd for the Scary Halloween template was put together.
    You are going to have to get into the .psd for the Scary Halloween template and rearrange the
    Layer Sets. Do you know how to do that? If not, I will give you very specific instructions on how to
    do that.
    You want the order of the Layer Sets to look like
    That is what worked for me just now to get the disc menu Preview to open to the main
    menu with the red highlight under Play.
    We will be watching for your reply.
    ATR

  • Install Adobe Premiere Elements 10 using the setup.exe in the root folder

    I am trying to make an SCCM install package for PremiereElements_10_LS15_win64. I am following the directions I found here http://helpx.adobe.com/photoshop-elements/kb/silent-install-instructions-photoshop-element s-1.html and I am using a Win7 SP1 machine with a new NT profile that does have admin rights. The error I receive is, "Install Adobe Premiere Elements 10 using the setup.exe in the root folder."
    Also, when I try to use AAMEE 2.1 I am told that when I use the containing the setup.exe and the .msi that "A valid installer could not be found."

    Hi Chris,
    First of all, you will not be able to package PSE 10 using AAMEE. It needs to be packaged only using the xml method, that you tried and got the error.
    So, here is want i want you to try.
    > Take a Win 7 machine with a fresh OS installation.
    > Follow the above article that you have properly i.e. create the application.xml.override.
    > Test the xml package by running the command mentioned under step 2 using the command prompt.
    Check if that works.

  • I am receiving the following error when launching Adobe Premiere Elements 13

    I am receiving the following error when launching Adobe Premiere Elements 13: Premiere Elements Debug Event Preferences.cpp-353 . I am running this on a Win 7 64 bit device on a Windows domain.  The user is not a network/local administrator.  Any ideas?

    RogerCHS
    Are you running the program from a Domain or Local Administrative type User Account? Apparently not Local Administrative by your description in the introduction?
    Last time we had this type of issue, the user was coming from a Domain type of account. The issue remains in that thread unresolved although there was some intervention
    by Adobe Staff.
    https://forums.adobe.com/thread/1638947?start=0&tstart=0
    Is yours a separate matter or are you related to the user in the other thread?
    Please review and consider, supply more details, and then we can decide what next.
    Thank you.
    ATR

  • I recently downloaded Adobe Premiere Element after testing the trial version...now I am having difficulty registering the program...please help...

    I recently downloaded Adobe Premiere Element after testing the trial version...now I am having difficulty registering the program...please help...

    Premiere Elements is not part of the Cloud, I will move this to that forum
    Premiere Elements Forum http://forums.adobe.com/community/premiere_elements
    Select a topic, then click I STILL NEED HELP to start Premiere Elements Online chat
    -http://helpx.adobe.com/contact.html?step=PRE

  • Unable to launch Adobe Premiere Elements 10 - Says AdPrE10 has stopped working

    I downloaded Adobe Premiere Elements and bought a product license via my workplace.
    I was able to install successfully, but when I launch the program, it says Premiere Elements 10 has stopped working. I have not been able to launch the program. I was having the same issues when I was using the trial version. Please help,
    I need to work on editing videos rightaway and it is ridiculous that a program that I have paid money to buy is not even launching to begin with. I can't even imagine the trouble I am going to have trying to use this version.
    Please don't send me thousands of instructions on downloading and installation. I have been able to download and install and added my serial key number. I see the icon on the desktop, It just doesn't launch. See error image.
    Thanks
    VidishaP

    I am not looking for sarcasm.
    Let's address that for a moment.
    I replied to your OP about 8 mins. after it was moved here. Much of that time was gathering the links to those articles, most of which I wrote, and have bookmarked. Each contains several links (one, probably 15 links).
    In ~ 30 mins. you report that there was nothing helpful in any of those articles or the ones linked to, from them. Though I wrote the articles (most anyway), it would have taken me that long to read each article, and just open the links, with almost zero time to do any of the things suggested. Just tracking down error and warning messages in Event Viewer, and following the links in any of those, would have taken at least that long.
    You state that you had the same issues with the trial version.
    I had the same issue when I was trying to use the trial version.
    In the world of troubleshooting, this is a pretty fair indicator that there is something wrong with your computer, or your OS. If nothing else, it indicates that a problem existed before your recent installation of PrE.
    Now I will have to search for return/exchange options since it is not launching by double clicking like every program does.
    Actually, Adobe makes this part very easy. Just return their software, within 30-days of purchase, and you get your money back.
    Sorry that I could not help you,
    Hunt

  • Unable to Launch Adobe Premiere Pro CS6 using High-Performance on AMD Radeon Graphic Card

    I have been unable to launch Adobe Premiere Pro since installing it with the error message "Adobe Premiere Pro could not find any capable video play modules. Please update your video display drivers and start again"
    Here are my specs:
    Lenovo Ideapad U400
    Windows 7 (64bit)
    Intel i5 2.5 ghz processor
    AMD Radeon 6470M graphics card
    The only occasion during which I have successfully launched Premiere Pro was after reverting to the default graphics card on my computer and uninstalling AMD Radeon, otherwise, I have tried to change Premiere Pro to run on High-Performance on Catalyst Control Center to no avail, I do not wish to revert to the Standard Graphics Card as it slows down my computers performance one hell of a lot, neither do I wish to have to constantly uninstall and reinstall my AMD Radeon Graphics Card when I use Premiere Pro. Thank you for your time.

    Update:
    - with Intel (R) HD Graphics Card disabled, Catalyst Control Center reports that no AMD Graphic card is installed
    - using Device Manager under Control Panel, AMD Radeon 6470M was verified to be up-to-date
    - Premiere Pro works so long as I disable the Intel card before launch, however, I re-enable it upon startup to get rid of the 800x600 resolution
    - AMD Mobility Radeon Driver Verification Tool is unable to verify and update my driver, refers me to lenovo to update it.
    - My graphics card is up-to-date as verified by lenovo
    - Intel (R) HD Graphics Card now up-to-date
    - Display currently mainly using Intel (R) HD Graphics Card (Possibly why it caps resolution at 1024x768 when disabled) I'm not sure how to switch the main Graphics Card used, Catalyst Control Center doesn't seem to have the option.
    - when disabled, computer reverts to vgasave instead of Radeon
    - Disabling Radeon does nothing to existing display
    - After updating my Intel card, Catalyst Control Center reported CCC was not supported by the current display adapter
    - CCC worked after rolling back Intel card
         From what I infer, I believe the problem to root from my intel card being the main card used, if there is anyway to switch my radeon card to the default instead of the Intel card, do tell me, I believe this may solve the problem, I apologise for troubling you guys, and I'm starting to feel that I shouldn't be troubling Adobe with my problem with AMD, this discussion is probably really out of place but I hope it will help out others with a similar problem.

  • Crash on launch (Adobe Premiere Elements 11 - OS 10.5.8)

    Impossible to launch ma Adobe Premire Elements.
    It crash on SmartSoundAdobePlugin.
    I'm on Mac 10.5.8. MacBookPro 15". RAM 8GO.
    I update SonicFire but have an issue with serial of it. I launck Premiere Elements first but crash again...
    Any idea ?

    Welcome to the forum.
    This was a response that I just got from SmartSound Support:
    Premiere Elements 11 comes with Sonicfire Pro 5.7.3.  The installation can be either the free version (which contains only the Express Track window), or the full version (which includes the timeline, video window, and Bin/Spotting window, and the Mood Mapping Timing Control features) depending on the serial number that is used to activate it.  Unfortunately there was an issue with version 5.7.3 that requires an update to version 5.7.5 in order to function properly.  The link for the patch update to version 5.7.5 can be found here:
    http://www.smartsound.com/support/updates.html?product=sfp5
    Basically the patch just needs to be downloaded and ran while Sonicfire Pro is closed and it will update the software to v5.7.5.  This should be the first step for new PrE11 users.
    Next, we have built in a method to automatically obtain a serial number when Sonicfire Pro is invoked from within Elements 11.  If a user clicks on the "Use SmartSound" link inside the audio section, it will launch Sonicfire Pro and automatically retrieve a full serial number (assuming there is not already a serial number in place), allowing access to the full array of features mentioned above.
    So the basic steps to get Sonicfire Pro up and running with PrE11 are:
    Update to 5.7.5
    Launch Elements and click the Use SmartSound link
    I had been in contact with them on an update for my Tips & Tricks article, and when I saw your post, thought that part of their response might be of use to you.
    Good luck,
    Hunt

  • Can't launch Adobe Premiere Elements 12 anymore

    I was using it for a few days without problems. Now I can open see the sign in page. After I sign in, it disappears. Nothing else.

    xzhang
    What computer operating system is your Premiere Elements 12 running on? For now I will assume Windows 7, 8, or 8.1 64 bit.
    Please see if the following will work for you
    Just do the renaming of the SLCache Folder for a start.
    http://www.atr935.blogspot.com/2014/04/pe12-premiere-elements-12-editor-will.html
    We will be watching for your results.
    Thank you.
    ATR

  • Adobe Premiere Elements does not open after installation

    Hello,
    I have written before last week. I have bought Adobe Photoshop Elements 11 and Adobe Premiere Elements 11.
    I had a trial version of Photoshop Elements 11 and with the code I could access the full version.
    However Premiere Elements did not open after installation. I did not had a trial version so I first downloaded the full program. I went through the whole installation process and everything seemed ok, no error messages. But when I tried to open Adobe Premiere Elements after restarting the computer it did not open at all. Nothing happened.
    I have de-installed and re-installed the program for a couple of times over and over again but with not result. Also tried to download the trial version first and also this didn't work. I checked my Quicktime and updated to the latest version.
    I use a Windows laptop: Asus Intel Core i5-2430M, 2,4 GHz
    I hope you can help me out!
    Thanks!
    Inge

    Yes I saw it but PSE (refers to Photo Shop Elements??) and I have trouble with Premiere Elements..(so the video program)
    The Photoshop Elements worked.
    I am not sure what to do here also the link at your reply "working with your operation system tools" didn't work..(got the "broken link error")
    thanks
    Inge

  • Adobe Premiere Elements 9 Stopped Working

    When I launch Adobe Premiere Elements 9 the only menu options that are available are to create a new Project or open a previous one, all other menu options are greyed out. Creating a new project has no effect. If I attempt to open a previous project I get a message saying a serious error has occurred and Premiere must close. This product had been working fine for the past two years. 

    Hi There,
    I'm having a similar issue, having not used Premiere Elements 9 for a few months, which I'm only discovering now.
    My issue seems to be only with the "Instant Movie" option.
    When i select "Create/Instant Movie" The PE window opens and loads to a grey screen only.
    I installed the 9.01 Update - Same.
    I deleted the Prefs file - Same.
    I deleted the whole 9.0 folder - Same
    So i decided to do a full uninstall/reinstall and the same issue occurred. Again i tried the update, deleting the prefs file and the 9.0 file and I'm still in the same situation.
    BTW i have also tried setting compatibility mode to (XP Service pack 2 and 3, Vista SP 1 and 2 and Win7)
    Do you have any ideas on what might be causing this?
    I'm running Windows 7 and currently running the Premiere Elements 9.01 update.
    Any help appreciated.
    Thanks.

  • Disabling "move files when importing" with Adobe Premiere Elements

    I want pictures/videos to stay in file location when importing them into Adobe Premiere Elements (I use Adobe organizer) as I also use the files in Adobe LIghtroom. The respective option cannot be disabled in the import dialogue.

    idogu
    Could you elaborate on what you are doing and the problems that you are running into?
    What version of Premiere ELements and its Elements Organizer are you using and on what computer operating system is it running.
    My problem in understanding your question involves the following thoughts.
    When you import files into Premiere Elements or its Elements Organizer, the originals remain at the computer hard drive save location. The program has just thumbnails of the files, and those thumbnails need to trace back to the originals at the hard drive save location. Is the problem in a shortcoming of the Lightroom program?
    We will be watching for clarification.
    Thank you.
    ATR

  • Need help with Adobe Premiere Elements 2

    I can drag a large high rez jpeg into timeline. Then when I click to playback....it gets more pixelated. That's a bad beginning. Then, when I go to export it, I've tried several extensions. All look bad during playback on YouTube. This should be pretty simple. High quality jpeg, but is fuzzy in movie. What's going wrong?

    hi Bill -
    ok fine. I have PSDs too. I tried what you said.
    I put a PSD right beside a JPEG in the timeline. I rendered it (which I
    didn't know to do because the instructions don't even mention it. The
    instructions are terrible. Seems it leaves out a lot of info.)
    So, then I click PLAY on my monitor. I see no difference between the PSD
    and the JPEG yet. So, if I want to put this on YouTube, what's the best way
    exactly, without gettting too technical?  It looks like I have the choice
    between Exporting in Mpeg or Quicktime or Windows Media. I think youtube
    likes wmv.
    From: Bill Hunt <[email protected]>
    To: Tommy Midyette <[email protected]>
    Date: 6/3/2010 10:01:24 AM
    Subject: need help with Adobe Premiere Elements 2
    >
    When you drag the stills to the Timeline, there should be a red line
    above them. Press Enter to Render the Timeline.
     
    Do not know the particulars of PrE 2, but in later versions, you can
    Rt-click on the Program Monitor, and choose Magnification = 100%, rather
    than Fit. You might have to resize your Program Monitor, but check at 100%.
     
    Also remember a few points:
     
    1.) You are looking at a DVD-quality image now, and that was designed
    with low-rez CRT TV's in mind, and NOT hi-rez computer monitors. DVD vs
    hi-rez sources and displays is probably less than what VHS vs DVD was, not
    that long ago.
    2.) You are looking at an emulation, a preview
    3.) Your images have already been compressed to JPEG once, loosing
    quality. That is why I always work in PSD, especially if there has already
    been one JPEG compression, whether in camera, or in the image processing
    stage. I keep JPEG either out of my workflow, or as limited, as is
    possible. Some do not see the quality loss with JPEG compression, but I do,
    and if I can create images that are as good as it gets, I know that my
    clients will be happy.
     
    Good luck,
     
    Hunt
    >

  • Adobe Premiere Elements 12 will launch and then vanish

    Okay so just bought Adobe Premiere Elements 12. Loaded it up and went to run it. First time I ran it I get the Adobe Premiere Elements 12 Launch pad, you know where you select the Organizer or the video editor. I select video editor, it gives me a sub menu asking if I'm opening an existing Project or a new project. I select new project. the Video editor opens and I get a pop up windows stating "Please Log-in with an Admin account to access Adobe premiere Elements." I hit 'ok' and the video editor promptly vanishes leaving me at the launch pad which I close. I go to the short cut, right click on it and select "run as administrator." and I re-launch the program. Back to launch pad, select video editor, select new project. The video editor loads and appears to be working for about 3 seconds and then it vanishes. No error window, no crash report nothing. Just 'pop' it's gone.
    Any idea what I can do about this? I'd really like to use the software I just bought.
    Compute specs:
    OS: Windows 7 Home Premium
    -updated system drives yesterday
    Prossessor: AMD Phenom 2 X6
    8Gb ram
    NVidia GeForce GTX 460 4GB card
    -Drivers updated yesterday
    Primary drive is a solid state 128gb
    2 secondary SATA drives at 1TB each
    Premiere Elements is loaded on the 1st of the 2 secondary drives.

    Please confirm...
    a. Are you running the program from a User Account with Administrative Privileges as well as the Run As Administrator from the right click of the program's desktop icon?
    - I am running it from an admin level account.
    b. Did you install the program to the default drive C location...you mention "Premiere Elements is loaded on the 1st of the 2 secondary drives", but is it the drive designated C?
    - No. all I have on my primary drive (C:\) is windows, drivers and scratch disk. All my programs outside of windows are loaded on the drive designated J:\
    c. Do you have the latest version of QuickTime installed on your computer with Premiere Elements?
    - I did not before, but I just updated it before responding here. No effect.
    d. Does your computer use just that NVIDIA video card/graphics care? Is there a second card displayed in Device Manager/Display Adapters?
    - the NVIDA GeForce GTX 460 is my only video adapter.
    e. Does the problem exist with and without antivirus and firewall(s) disabled?
    - Yes. I shut off Kaspersky and tried running the program via the launch pad. no change.
    You say that the crashes occur when you select Video and new project. What happens if you select Organizer instead? Still crash?
    - If I go into Organizer the system seems to run fine. I loaded Organizer about 20 minutes ago and it's still up and running just fine. But in that same time span I've tried to launch premier elements several times. It still crashes after a few seconds.
    New data though. Can't tell if it's from Premier, or something else. a couple minutes after the latest attempt to run Premiere Elements I found a new window with the header "CAHeadless Debug Event". The Window reads:
    CAHeadless has encounter an error.
    [..\..\Src\Sequence\Sequence.cpp-2233]
    and then I have a button that reads "Continue".

  • Adobe Premiere Elements 9 won't open (says 'my online storage is full' on launcher)

    I have been using Adobe Premiere Elements 9 for quite some time now. I've made several projects in the past, and now all of a sudden it says on the launcher "You've reached your storage space limit. If you'd like to back up, store, share, and access your photos online, please consider upgrading your storage plan." I ignore the notification and proceed to make a new project. After it finishes loading, the editor tab pops up, but pops up blank, and remains blank, and there's nothing I can do about it. I don't want to pay for online storage because it's too expensive and I don't have the money, and I don't know where I can delete what seems to be online files. I have tried deleting and reinstalling the software, but I still get the error message.
    I haven't gotten any help at all for my problem. I payed $100 for this and I want to make use of it. This is my last hope. Someone please find a solution for me.
    Bronson

    Bronson,
    Did you have photos stored on photoshop.com? Ever? If so, they probably have all been transferred over to Adobe Revel if you did nothing during the Adobe transitioning from photoshop.com to Adobe Revel.
    Right now there is funny business going on with Elements programs with regard to the Adobe ID and Password sign ins. I still do not see an explanation for not being able to sign in, but the program works in spite of this. I have not see Adobe posting any acknowledgment of the problem or its probable involvement in the situation.
    When you reported what I thought was success on your side, I asked
    When you get everything together and get a chance, please let us know if it was everything in the list or one particular item in the list that was the key to success?
    Never did get an answer to that question whether it was one or a combo of my suggestions that got things working at that time. So, answer to that would help especially now when we seem to get back to Premiere Elements 9.0/9.0.1 not working.
    Since your report of success on August 19th how long did the success last? Until today or other?
    If you have not already, have you repeated the steps that appeared to resolve the issue?
    When you went back to using the "fixed" Premiere Elements 9.0/9.0.1, did you get tempted into clicking on any of the photoshop.com/Adobe Revel lures?
    Please review the above and then we can decide what next.
    Sorry for the setback.
    ATR

Maybe you are looking for