Launching an Web Start gives me error message(s), 1 for every .jnlp..

Hei!
- MICROSOFT JSCRIPT COMPILATION ERROR -
/ ! \ Expected ' ) ';
| OK |
I get this strange JScript error dialog everytime when i go launching an Web Start application from my PC XP PRO SP2 JRE6u1..
i have reinstalled Java several times and reinstalling wont help..
this error message dialog is getting a bit annoying and i really want to remove it from my .jnlp web starts..
my knowledge of computers and java is not strong enough to help me carry why running an .jnlp file causes an JScript error..
thank you, for helping me..
JariTapio / Helsinki

When Java Web Start starts up, it tries to determine the Proxy Settings from either the users deployment.properties file, or from the browser (if the deployment.properties setting is set to the default "Use Browser Settings"
In either case the setting can be to use an automatic proxy configuration script. If it is, Java Web Start will invoke the MS java script engine to parse the config script.
This sounds like an error message from there.
To fix this, you could use the Java Control Panel to set the proxy directly, or change the setting in the browser.
In versions before 1.5.0, Java Web Start would always go to the IE system settings for proxy. In JDK 6, javaWeb Start will read the proxy settings from the "default browser". If this is Firefox, it may return different settings than are set in IE (the default system proxy settings).
/Andy

Similar Messages

Suddenly started receiving a error message when checking for updates in app store nsurlerrordomain error - 1012 how to fix?

Suddenly started receiving a error message when checking for updates in app store nsurlerrordomain error - 1012 how to fix?

Thanks Linc I will sit tight for a while to see what happens before chasing up customer service. Cheers.

Having big problems with my new Mac Pro, when I launch Photoshop CC, I get an error message, can carry on but after a few tasks it starts going gar... menus go blank, when you try to save it shows a blank box.... can anybody help?

Having big problems with my new Mac Pro, when I launch Photoshop CC, I get an error message, can carry on but after a few tasks it starts going gar... menus go blank, when you try to save it shows a blank box.... can anybody help?

when I launch Photoshop CC, I get an error message
and what exactly is the text of that error message?

Launching LR4 after a restart gives the error message "Lightroom encountered an error reading from its preview cache and needs to close" no fix on re

launching LR4 after a restart gives the error message "Lightroom encountered an error reading from its preview cache and needs to close" no fix on restart

Delete your preview cache, it is a folder whose name ends with Previews.LRDATA

IOS 7 will not load on ipad 2. It starts and then gives an error message. I'm in Florida.

iOS 7 will not load on ipad 2. It starts and then gives an error message. I'm in Florida.

the servers are overloaded at the minute. keep t it and it will download eventually!

To download an App the 3 security questions are required. But at the end, apple is not able to complete the task and gives an error message. No more downloads are possible. What can I do?

to download an App the 3 security questions are required. But at the end, apple is not able to complete the task and gives an error message. No more downloads are possible. What can I do?

Very Important, how much Free Space is on your Hard Drive first of all? Click on the Macintosh HD on the Desktop, then do a Get Info on it.
Could be many things, we should start with this...
"Try Disk Utility
1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu at top of the screen. (In Mac OS X 10.4 or later, you must select your language first.)
*Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
3. Click the First Aid tab.
4. Select your Mac OS X volume.
5. Click Repair Disk, (not Repair Permissions). Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
(Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)
If perchance you can't find your install Disc, at least try it from the Safe Boot part onward.
Do they launch OK while in Safe Mode?

Since uploading Maverick, my Microsoft apps give an error message "(the app) quit unexpectedly. Click Reopen to open the application again." However, this does nothing but renew this window. What to do?

Since uploading Maverick, all of my Microsoft apps give an error message "(name of the app) quit unexpectedly. Click Reopen to open the application again." However, this does nothing but renew this window. I have to click on the "OK" button to get rid of the error message. What to do?

Very Important, how much Free Space is on your Hard Drive first of all? Click on the Macintosh HD on the Desktop, then do a Get Info on it.
Could be many things, we should start with this...
"Try Disk Utility
1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu at top of the screen. (In Mac OS X 10.4 or later, you must select your language first.)
*Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
3. Click the First Aid tab.
4. Select your Mac OS X volume.
5. Click Repair Disk, (not Repair Permissions). Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
(Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)
If perchance you can't find your install Disc, at least try it from the Safe Boot part onward.
Do they launch OK while in Safe Mode?

ITunes set up gives an error message saying not a "valid win32 application"

I am using Windows 7 and trying to download iTunes, but when I try to open the iTunes set up it gives an error message saying that it is not a "valid win32 application". It does the same for downloading quicktime. I have no idea what this means or what to do about it.

That suggests that the installer is getting damaged during the download.
I'd first try downloading an installer from the Apple website using a different web browser:
http://www.apple.com/itunes/download/
If you use Firefox instead of IE for the download (or vice versa), do you get a working installer?

Adobe Acrobat gives an error message "The key file is missing, canceled"

Hi,
Adobe Acrobat gives an error message "The key file is missing, canceled" this is a direct translation of the Finnish error message. Acrobat is already re-installed. The operating system is Windows Server 2008 R2, and there is also installed Adobe Reader X.
BR
Heikki

Please let us know do you see this error on every launch of Acrobat?
Recommended is to have latest version of Acrobat and Reader. i.e. 10.1.8
Try updating application and then see if you still encounter the error.

IPhone 4S will not start or charge, error message when trying to restore in recovery mode

So my iPhone 4S shorted out the other night while I was charging it. I did the hard reset and it restarted itself. But later that evening, it turned off and wouldn't restart no matter what and would not charge. When I connect it to my computer (mac) iTunes recognizes it and says it is in recovery mode and needs to be restored. It starts the restore process and the apple logo comes up with a loading bar but then when it gets to the "verifying restore with Apple" it gives an error message (9) and then the phone goes back. Please help!

Hey rileyec,
I found this information about error 9:
Error 9
This error occurs when the device unexpectedly loses its USB connection with iTunes. This can occur if you manually disconnect the device during the restore process. You can resolve this issue by using USB troubleshooting, using a different Dock Connector or Lightning Connector to USB cable, trying another USB port, restoring on another computer, or by eliminating conflicts from third-party security software.
via: iTunes: Specific update-and-restore error messages and advanced troubleshooting
http://support.apple.com/kb/TS3694
If those steps do not resolve the issue, I would attempt to perform a recovery-mode restore:
iOS: Unable to update or restore
http://support.apple.com/kb/HT1808
Cheers,
Delgadoh

Every time I download a new app or update an old one it doesn't work. It gives an error message saying it is unable to download the application. I have 2 choices. Retry or done. Retry doesn't work so I press done. What can I do to fix this?

Every time I download a new app or update an old one it doesn't work. It gives an error message saying it is unable to download the application. I have 2 choices. Retry or done. Retry doesn't work so I press done. What can I do to fix this? Someone please help!

Try using Google's DNS instead of the one your IPS is providing.
- To change on the iPod go to Settings>wifi and change the DNS to 8.8.8.8
- For the computer see:
Public DNS — Google Developers
- Did anything happen to your router right before this started? Maybe the router is blocking the port used.

Launching iStore from jDeveloper gives Application Error

Hi All,
Launching iStore from Jdeveloper gives application error. I am new to this arena. Here is the actual description.
We are on 11.5.9 system however applied the RUP1 of Sales and Marketing for 11.5.10 which inturn gave us the 11.5.10 iStore.
I am using jDeveloper 10g with J2SE 1.4.2_06 as per the instruction. Intially all the test files for db , session worked fine as per the suggestions from oracle Metalink Note# 419887.1 . I could also load the login page initially though upon entering the login details it gets me to the same application error page. After some clearning of cache files and reloading the jdeveloper this time it does not even take me to the login page and gives the application error message.
Here is the acutal message : The application is currently not available or an unexpected error has occured. Please try again later.
If this message persists, please contact the system administrator.
I can login to the UI from the actual server but not sure why it does not work from the jdev. Please guide me and let me know what went wrong. Here is the sample guest log file.
15:40:4:391 [Session.checkContextValues] party id is null
15:40:4:422 [Session.setParty] Enter: party id=null
15:40:4:422 [Session.getCustomerId] Enter: GUEST
15:40:4:438 [Session.getCustomerId] Call stmt.executeQuery
15:40:4:469 [Session.getCustomerId] Call rset.next()
15:40:4:485 [Session.getCustomerId] Get customer id
15:40:4:501 [Session.getCustomerId] customerId is 82238
15:40:4:516 [Session.getCustomerId] Exit
15:40:4:516 [Session.setParty] partyId = 82238
15:40:4:516 [Session.getPartyType] Enter 82238
15:40:4:547 [Session.getPartyType] party type = PERSON
15:40:4:594 [Session.setParty] party type = PERSON
15:40:4:594 [Session.setParty] user is individual user
15:40:4:657 [Person.findByPartyId] query: SELECT PARTY_ID,PARTY_NUMBER,PARTY_NAME, PERSON_FIRST_NAME, PERSON_MIDDLE_NAME, PERSON_LAST_NAME,OBJECT_VERSION_NUMBER, STATUS, STATUS_CODE FROM HZ_PARTIES P, FND_USER F , JTF_UM_USERTYPE_REG UT WHERE P.PARTY_ID = F.CUSTOMER_ID(+) AND UT.USER_ID(+) = F.USER_ID AND P.PARTY_ID=:1 AND P.PARTY_TYPE IN ('PERSON','PARTY_RELATIONSHIP')
15:40:4:797 [StoreProfileCacheLoader.load] Enter
15:40:4:813 [StoreProfileCacheLoader.load] val = nul
15:40:4:813 [StoreProfileCacheLoader.load] Exit
15:40:4:829 [IBEUtil.getStoreProfile] IBE_DIAG_EMAIL_ADDRESS=null
15:40:4:860 [IBEUtil.getSpecificProfile] Enter; profile=IBE_DIAG_EMAIL_ADDRESS applId=null respId=null
15:40:4:876 [IBEUtil.getSpecificProfile] Exception caught: Exhausted Resultset
15:40:4:876 [IBEUtil.getSpecificProfile] value=null
15:40:4:891 [IBEUtil.getSiteProfile] IBE_DIAG_EMAIL_ADDRESS=null
15:40:4:891 [IBEUtil.getStoreSiteProfile] IBE_DIAG_EMAIL_ADDRESS=null
15:40:4:891 [ibeCZzdError.jsp] Email: null
15:40:4:907 [RequestCtx.end] PERF: REQUEST STOP
Thank You
Srikanth

You're in the wrong forum. This one is dedicated to Oracle forms. Try either the eBusiness-forum, or the JDeveloper-forum.

My canon p-150m scanner gives the error message "cannot load drivers" ever since updating to yosemite

why does my canon p-150m scanner gives the error message "cannot load drivers" ever since updating to Yosemite ? I have had 2 reload the driver 2x - but each new time I start I keep getting the same error message .

Try resetting the printing system.
OS X Mavericks: Reset the printing system

My apple RIP gives this error message" the application ppRIPe has unexpectedly quit"

MY APPLE RIP GIVES THIS ERROR MESSAGE" the application ppRIPe has unexpectedly quit"

Thanks.
I should have mentioned that I have already done the Resolving Permissions as outline on Apple Support pages, but, I went ahead and did the complete sequence as shown on Dr. Smokes.
I decided to stop beating a dead horse and did an Erase and Install of 10.2 again since I did not have anything on there yet. So far, everything is working perfectly. I am doing the Software Updates called for one by one to see if any of those caused the problem.
The only thing I did other than doing all of the updates after the install was to install OS 9.2 for my Classic Environment software and I also installed an HP PSC 1315v All-In-One scanner/printer. I cannot imagine that would have done anything.
I did have some strange issues with Where in the USA is Carmen Sandiego and The Star Fleet Technical manual so I may stay away from them unless I start in OS 9 if none of the other updates cause any issues.
Thanks. BTW, How should I rate your answer? I know that it did not solve my problem, but, it is likely that something else I did whacked something.
I'll update when I know more.

Upon upgrading iPhoto, iPhoto Help no longer works. It gives the error message: "The selected topic is currently unavailable. To see all iPhoto Help, you must be connected to the Internet." Help!?

Upon upgrading iPhoto, iPhoto Help no longer works. It gives the error message: "The selected topic is currently unavailable. To see all iPhoto Help, you must be connected to the Internet." I am obviously connected to the internet since you are reading this.
I tried upgrading permissions but it did not help!? Can anyone tell me what is wrong? Thanks

Try
Reboot the computer, see if that fixes it.
Then try:
Backup your files off the computer (not TimeMachine) and disconnect
Hold c boot off the 10.6 disk and simply reinstalling OS X
Log in and update to 10.6.8
c boot off the 10.6 disk again and use Disk Utility >Repair Disk
reboot and all should be fine, except some third party programs that install kext files, those will have to be reinstalled from fresh sources.

Launching an Web Start gives me error message(s), 1 for every .jnlp..

Similar Messages

Maybe you are looking for