Launching Internet explorer after install finishes

I find that after installing from IE8 the installer launches the browser again using the same Administrator privileges that the installer requested with UAC. I'm not sure this is in the best interest of the user.

I think this is primarily to demonstrate that Flash installed correctly, or didn't as the case may be. If you're logged on as Adminstrator, then that modus operandi will prevail.
You could try logging in with a user a/c with less priviliges and then right click the installation file and choose "Run As Administrator", but I can't guarantee it'll work.

Similar Messages

Webmail is not working internet explore after installed sp3 exchange 2007 roll up 15

webmail is not working internet explore after installed sp3 exchange 2007 roll up 15 but mozill firefox webmail is working fine

Hi,
Does the issue happen to all users? What’s your IE version? Is there any error when you access OWA 2007 in IE?
Please click Compatibility View settings in your Internet Explorer. Then, add the OWA site to the list of sites to be viewed in compatibility view and check whether the issue persists.
Regards,
Winnie Liang
TechNet Community Support

Deleted Internet Explorer after installing Firefox and now can't connect to internet.

Windows7 Network Adaptor - error code Ox80070426 -troubleshooter won't start. Windows security center won't start.
Do I need Internet Explorer as well as Firefox?
I'm posting this message from a windows XP PC as netbook won't connect to the outside world.

Carolyn!
I first thought that with the little info I gave no one would even try to answer, therefor my astonishment when I tried to do what u said and internet worked!
Thank you very very very much for you quick answer. I opened my macbook did what u said and in 2 minutes the problem was solved ( I spent the whole afternoon looking for forums where I could find an answer )
Thank you! Very much you saved me much time!
Have a good day!
Chris

Trouble launching Internet Explorer

For the last week I haven't been able to launch Internet Explorer. I can get on the internet through Safari, so the problem is not with my internet connection. I've tried trashing the program and re-installing with no success.

I don't know why I wandered onto this forum, I posted on the Tiger forum Geeting on line and Networking.
Andrew Bishop, "Internet Explorer not working", 03:35pm Nov 4, 2005 CDT
and see
http://www.tuaw.com/2005/10/31/a-microsoft-catch-22/
It's microsoft up to its tricks. Either disconnect the computer from the Internet and reset the home page from preferences in IE or do as suggested in the links.

Launching Internet Explorer

I am trying to launch internet explorer from a java program using -
Runtime.getRuntime().exec("c:\path for IE.exe")
This works OK if I enter the correct path in the above statement as a string literal.
However the program generates a html file that I wish to view with IE.
So in my program code I have something like -
String fileName = file.getName()
Runtime.getRuntime().exec(fileName)
Unfortuneately IE will not launch with this code - does anyone know why ?
Regards
Scott

replace filename with ---> cmd.exe /c start iexplore
filename <---in the runtime method call....I have tried this but no joy. I am unsure how to format the command in the runtime method call and this is probably why its not working.
Do I need to do something like ("cmd.exe /c start iexplore" + fileName)

HT2470 Can Internet explorer be installed in Macbook pro

1.Can Internet explorer be installed in Macbook pro?
2.Can I have dual boot in my Macbook pro - with Mac and Windows ??

No, unless you install Windows, which you can certainly do. Boot Camp allows you to install any number of different operating systems.
If you're trying to use a website that refuses to load because it demands Internet Exploder, I suggest enabling the Develop menu in Safari's Preferences, and selecting a User Agent that placates the website.

I'm having problems with my internet connection after installing OS X Lion. Is this a known problem or just a local problem?

I'm having problems with my internet connection after installing OS X Lion. Is this a known problem or just a local problem?
After +/- 10 to 15min my connection is gone.
Does anyone have a sollution?

Lots of people are having the same problem, you're not the only one, belieeeeve me.
Just Googling the problem gets you tons of people complaining about the same thing, SOMETHING is up with Lion what wasn't happening with Snow Leopard. i just bought a new Imac and it CAME with Lion, so i started experiencing this internet dropout immediately.
It's been going on for the most of a year it looks like (at least by the dates from the threads i've been reading)
So your best bet is to fiddle with the System Preferences and read what other people have used to make theirs work. i'm doing that myself right now. I already posted a similar thread last night trying to figure out why my connection kept on dropping, i got a reply which linked me to a site. i followed the instructions there, so far so good, but i'm just being cautiously optimistic.
i'm gonna call Apple today and see if they've found anything, though seeing as this is a problem right out of the box there may not be an immediate solution. Good luck hunting for a solution :3
Site:
http://osxdaily.com/2011/11/06/lion-wi-fi-problems-solution-mac/?utm_source=feed burner&utm_medium=feed&utm_campaign=Feed%3A+osxdaily+%28OS+X+Daily%29&utm_conten t=FaceBook

Help me anyone? Can`t open Logic, after installed finished....

Help me anyone?
I can`t open Logic pro 8, after installed finished....
And within the installation I couldn`t find the part where we`re supposed to write the serialnumber.... (after destination seleted)
I´ve tried twice... And still no wiser

are you doing a clean/fresh install of logic or was it an upgrade?
also try to do a software update. that might help

I have not been able to launch Elements 12 after installing Photoshop cc on my computer. I would like to be able to use both. How do I accomplish that?

I have not been able to launch Elements 12 after installing Photoshop cc on my computer. I would like to be able to use both. How do I accomplish that?

What operating system and what happens when you try?

How to install Adobe PDF toolbar in Internet Explorer after uninstalling IE 10 and installing IE 9

Hello. I need help installing Adobe PDF convert web page to pdf toolbar to my Internet Explorer 9. I uninstalled Internet Explorer 11 and 10 because I could not open pdf files in IE 10 or 11 -- trying to open pdf documents froze/locked up Internet Explorer and I had to use Task Manager to exit Internet Explorer every time I tried opening a pdf document. I have downgraded to IE 9 with the hope that I will have better luck.
I am using Windows 7 operating system. I have Adobe Acrobat X Pro installed on my computer.
Now that I downgraded to IE 9, I've lost the Adobe convert web page to pdf toolbar. It is not even in my choice of add ons in Internet Explorer when I go to Manage Add Ons. How do I get the Adobe toolbar add on back?
I lost my Adobe Acrobat X Pro disk so do not have that to help me in any way. What can I do?
Your help is greatly appreciated!

If it is an issue of the AA X disk, you can download from http://helpx.adobe.com/acrobat/kb/acrobat-downloads.html. Be sure to create a replacement CD in case it is not available in the future. You will still need your S/N for any reinstall. You can usually get that from the Adobe site as long as you registered Acrobat (http://helpx.adobe.com/x-productkb/global/find-serial-number.html).

Launching VB6 Editor after installing Visual Studio 2013 results in "Please wait while Windows configures Microsoft Visual Studio..."

I have had various versions of Visual Studio installed beside Visual Basic 6.0 Enterprise for some time with no problems, most recently Visual Studio 2012 Premium.
I recently installed Visual Studio 2013 Premium, and now every time I open VB6 I get a dialog that says "Please wait while Windows configures Microsoft Visual Studio Professional 2013" that shows a progress bar. After it finishes (30 seconds or
so), it launches again and again and finally VB6 will open. This happens with each instance of VB6, regardless if I've already done it once and never run VS2013 in between.
If I cancel the dialog, I get this error message in a dialog: "Error 1712. One or more of the files required to restore your computer to its previous state could not be found. Restoration will not be possible." Several more "Please wait"...
dialogs will appear and if I continue to cancel, eventually I'll get the VB6 editor. It appear to work fine despite the error messages.
It seems to me that the VS2013 installer flagged some dll's or other files to be rolled back whenever starting VB6. It doesn't appear to be necessary, and I'd like to avoid playing the "Please wait" wack-a-cancel-button game before launching each
instance of VB6 (or waiting several minutes for no reason). So how do I fix this?
Note: I've seen something similar happen in Outlook on a different PC when upgrading from 2010 to 2013. The same sort of "Please wait"... dialog would appear each time I opened Outlook. Judging by the "similar" questions that popped up when
entering this forum post, I'd say this is a general problem with upgrading older versions or installing newer versions of major Microsoft software side-by-side.
/* Don Reynolds */

I found the answer!
I was having the exact same issue, and I was search for a solution and I happened across the following thread: http://social.msdn.microsoft.com/Forums/en-US/f4b0fd38-f4f9-41ea-bd8d-834203a175d2/building-visual-studio-2010-project-triggers-please-wait-while-windows-configures-visual-studio?forum=vssetup&prof=required
Scroll a small bit down, and there is a post by Barry Wang explaining that you need to use event viewer to find out what is missing. Anyway, I opened event viewer, then open VS 6, then hit refresh in the event viewer (under Windows Logs -> Application)
and saw a warning message from MsiInstaller. It gave me the following message:
Detection of product '{9C593464-7F2F-37B3-89F8-7E894E3B09EA}', feature 'Visual_Studio_Professional_x86_enu', component '{E3FF99AA-78B9-4A06-8A74-869E9F65E1FE}' failed. The resource 'C:\WINDOWS\Microsoft.NET\Framework\URTInstallPath_GAC\' does
not exist.
I opened an elevated command prompt, I navigated to the C:\WINDOWS\Microsoft.NET\Framework folder and verified that 'URTInstallPath_GAC' didn't exist, and then I did "md URTInstallPath_GAC".
Closed and reopened VS 6, and it instantly opened - no "Please wait" message.
Now this may or may not be the same problem you are having (problem is - I have had it happen on two separate computers now with VS 6 and VS 2013 installed), but it should point you in the right direction. In fact, you should be able to use the Event Viewer
for anytime the "Please wait" message shows up for any application, and then once there find out what is really missing.

Firefox will not load web page (I also have Internet Explorer 8 installed).

Fire Fox will not load web pages. It may have something to do with proxy settings but I have reset this to Auto-Detect which is where it has always been in the past but still nothing. Something has reset my proxy settings in the past which caused a similar problem but doesn't seem to be the issue this time. I have Internet Explorer 8.0 installed on computer right now and it seems to work.

After looking into this further I checked firewall settings in Panda A.V. For Firefox they were set to Custom settings which effectively disabled it. I changed setting to Outbound only like Internet Explorer and other programs and Firefox seems to work fine now. Hope this helps others who have experienced this problem. I have teenage children who use computer a lot (Face Book, etc.) so the root of the problem may have been Malware, Adware, or something else but hopefully Panda has taken care of this.

PDF's won't print in Internet Explorer after upgrading to Adobe Reader 11.0.03

PDF's won't print in Internet Explorer 9 after upgrading to Adobe Reader 11.0.03.
The print dialogue box won't open....nothing happens.
Desktop OS is Windows 7 SP1.
Randy Heil

Two obvious troubleshooting techniques are to delete and re-install the printer driver (or updating printer driver) and fixing the installation of Acrobat. Have you given those a try?

Plug-in stopped working in Internet Explorer after upgrade to JDK 1.4.2

I've been struggling with this one for a week now with no success, hope someone can help. I have Windows 2000, SP4, IE5.5, everything was working fine with the initial installation of JRE 1.3.2, then upgrades to 1.3.4, 1.3.7, 1.4.1 and finally 1.4.2. An applet forced an install of 1.3.1_07, and it stopped working, I uninstalled both 1.3.1_07 and 1.4.2 and reinstalled 1.3.1_07, and since then I get a dialog with the message:
Cannot load class sun/plugin/JavaRunTime.
The Bridge was installed at <C:\PROGRA~1\JavaSoft\JRE\1.37DB1~1.1_0> but the class is not there
Modify the registry key to reflect the new bridge location
The key is HKEY_LOCAL_MACHINE\SOFTWARE\JavaSoft\Java Plug-in
or change your CLASSPATH to include the new directory
Please consult the documentation for more information
And the dialog title says "Java(TM) Plug-in 1.4 Fatal Error"
BUT 1.4 is uninstalled and totally GONE!
I have uninstalled and reinstalled numerous times, numerous versions of JDK/JRE, always with the same basic result. Any attempts to install 1.4.x (either JRE or JDK) give this dialog PLUS a series of little dialogs with the header "asdas", and the message "register failk". I've looked through the forums and buglists for this same problem and found a few mentions of it, but there never seems to be any solution given.
And by the way, Mozilla 1.4 works perfectly with all the plug-in versions I've installed.
I'm beginning to believe there's a conspiracy....

I found my own solution to this one after many more hours of frustration. I found that there was a toolbar applet installed in Internet Explorer that started its own private JVM, and that JVM was being seen by the plugin code for 1.3.1_07. Apparently there was some conflict between what the plugin code expected and what that private JVM (not sure what version it was, the code had no mention of it) had to offer, which caused the crash dialog. Uninstalling the toolbar (and its parent application) solved the problem. I may do further testing to see if there are any plugin versions that do work with this particular applet.
It is also still a mystery why this problem only cropped up after installing and uninstalling 1.4.x version of the plugin, but I didn't keep close track of the whole sequence so it may have been coincidental.
Hope this helps someone.

System Check Message: How do I close my Internet Explorer to install Adobe Illustrator CS3?

Upon installing Adobe Illustrator CS3, I cannot finish installing because system check tells me that Internet Explorer needs to be closed. I am using Windows Vista Home Edition Premium. I'm simply confused because I do not know exactly how to close Internet Explorer to finish my installation process. Any help would be appreciated, thank you!

hello, unfortunately when you search for this error message it appears that it might be related to malware that is active on your system and blocks file downloads.
please try to run a full scan of your system with different security tools like the [http://www.malwarebytes.org/products/malwarebytes_free free version of malwarebytes], [http://www.bleepingcomputer.com/download/adwcleaner/ adwcleaner], [http://www.microsoft.com/security/scanner/default.aspx microsoft safety scanner] & [http://www.kaspersky.com/security-scan kaspersky security scan].
if you can't download/execute any of those tools, you might want to try to boot windows into safe mode with networking support first and see if it works then: http://windows.microsoft.com/en-us/windows/start-computer-safe-mode#start-computer-safe-mode=windows-7
[[Troubleshoot Firefox issues caused by malware]]

Launching Internet explorer after install finishes

Similar Messages

Maybe you are looking for