Launching Premiere Pro CS6

Hi,
I have installed Premiere Pro CS6 via the Creative Cloud, after the application was installed via the Desktop application I could not find how to launch.
I looked in the W8 applications but there is no icon for the application.
The help in adobe site claims it is possible to launch the application by clicking the icon on the Creative Cloud, but there is no clickable icon there.

Hi Oferh,
Strange that the Creative Cloud was installed and worked fine, but the Pr failed w/o any error and was showing to be installed.
Sorry that happened. I can see how you may have been confused. Once you have updated your OS to 64 bit, you can have access to all the video applications, like Premiere Pro and After Effects.
Good luck,
Kevin

Similar Messages

  • Error launching Premiere Pro CS6 due to non-capable video drivers

    Premiere Pro not finding any capable video drivers.   I am newly subscribed to the CS6 Creative Cloud and using a brand new Toshiba i7 windows laptop. When I try to launch Premiere Pro, I get the error message -" could not find any capable video display modules. Please update your video display drivers and start again."   This is the only/first Adobe program that I have installed so far besides the Adobe Application Manager on this machine. I believe the i7 controller should be able to handle this.  What next?

    More hardware information needed... ESPECIALLY the brand/model graphics adapter in that laptop, and the driver version
    Read http://forums.adobe.com/message/4200840
    Also, some laptop information...
    For effective HD video editing, a laptop with the following
    -at least the Intel sandy bridge 2720 or 2820 quad processor
    -1280x900 display with OpenGL 2.0-compatible graphics card
    -and 8 or 16 gig ram and Win7 64bit Pro
    -and 2 internal 7200 HDDs minimum
    Does your graphics adapter "card or motherboard chip" and display match what I bolded?
    Dual laptop video http://forums.adobe.com/thread/1001579
    -Use BIOS http://forums.adobe.com/thread/1019004?tstart=0

  • Intermittent problem after launching Premiere Pro CS6.0.2 - audio pitch dropped and video staggering

    Intermittent problem after launching Premiere Pro - all audio is lower in frequency by very noticeable amount and video keeps dropping back a few frames every few seconds, apparently trying to keep in sync with slower audio.
    This does not happen consistently, perhaps every 5 or 6 launches. Otherwise program works normally after launch and sometimes a quit and relaunch will fix the problem.
    Have submitted bug report but wondered if anyone else having the same problem?
    Mac OSX 10.8.4 iMac 3.4 Ghz Intel Core i7 32GB

    Well if i do that, the video will raise up GBs larger (and that is really bad).
    Why is it really bad?
    Its a fact of digital  life. High datarate = quality.
    example ...even the Youtube preset is in the 8mpbs area.
    ...and you are exporting 1 hr 35mins of media.

  • When I try and launch Premiere Pro CS6 I get dynamiclinkmanager quit unexpectedly

    And Premiere Pro CC never launches. And the dynamiclinkmanager window keeps coming up, to the point that i can't do anything else as the window just keeps going to the foreground. CS6 all works perfectly fine.
    I am on a MacPro 4,1 running 10.8.4 with 24GB of RAM and a PC NVIDIA GTX 670 graphics card.
    And honestly nothing is working in the creative cloud. Adobe Media Encoder instantly quits. Adobe Photoshop seemed to open, but forcible sends me to this web page http://www.adobe.com/cfusion/membership/index.cfm?nf=1&nl=1&productID=598&release=1.0&plat form=2&locale=en_US&source=PCSNOTIF which reads 413 Header Length Too Large and it freezes and starts the dynamiclinkmanager quit cycle again. Illustrator says Can't print the illustration. Disk full error has occured while it's printing and then quit.
    I have gotten bridge cc to launch, and that is it.

    Here is my Premiere Pro Dynamic Link Crash log in txt file form. Here is my Photoshop Dyanmic Link Crash.
    Here is the Photoshop Error Message:
    Here is the Illustrator Message:
    And the After Effects Error Message:
    I will call tech support when I have some time (hopefully I have the weekend off).

  • Launching Premiere Pro CS6 Family Trial After Installation

    I downloaded the CS6 Family Trial version onto my computer and installed it. After installation, no desktop icon showed up, it did not appear in my program list, did not automatically launch...etc. I found ti in my Documents and Settings folder, but found no way to launch the program. only the following folders:
    Deploy
    Packages
    Payloads
    Resources
    Set-up (which I have run several times, same issue)
    This is a very old Sony Vaio laptop - originally was running CS4, CS5 would freeze up. I suspect this computer is too old to run CS6.
    Details about my computer:
    2.00 GHz processor
    1.99 GHZ, 2.00BG RAM
    Microsoft Windows XP
    I need help with actually launching the program after installation - or confirmation that my computer is just too old.
    Thanks,
    RR

    Premiere Pro CS5 and later are 64bit, so will not run on WinXP 32bit... I don't think PPro will even run on WinXP 64bit
    Some ideas for a Laptop Video Editing PC from past discussions
    http://www.sagernotebook.com/
    http://forums.adobe.com/thread/957472
    http://www.adkvideoediting.com/
    For effective HD video editing, a laptop with the following
    -at least the Intel sandy bridge 2720 or 2820 quad processor
    -and nvidia graphics preferably the 460m, 485m is a bit much
    -1280x900 display with OpenGL 2.0-compatible graphics card
    -and 8 or 16 gig ram and Win7 64bit Pro
    -and 2 internal 7200 HDDs minimum

  • Premiere Pro CS6 Trial Mac crashes on launch

    I installed Master Collection CS6 on my Mac Pro tower 3,1 quad core, 16 GBs RAM.  I set up a new video project in Premiere and all was going fine, loaded all assets, etc ... Next I was attempting to set up audio hardware for recording a narriation on a track.  I was using a USB VoIP device.  I could not arm a track for recording, so I figured audio hardware needed set up.  My VoIP was already selected in Preferences>Audio Hardware once inspected, but I still could not arm a track.  So, I tried Utilities>Midi Set Up>Aggregate Audio Devices to add my headset to Premiere Pro.  Headset was in list but I could not add anything to premiere.  Everything I checked automatically unchecked once selected. 
    Back to square one.  So I unhooked my headset, went to Preferences>Audio Hardware and attempted to select a Built-in I/O device. Then, Premiere just crashed. 
    Everytime I try to open premiere it crashes.  I rebooted, tried a different project, etc .... nothing! 
    So ... h e l p !

    You are right , to use the trial you do not need the serial number however it is a prompt screen that comes up at the time of launch so that you can serialize the software and turn it to full version also it let you know the number of days left for the trial.
    In your case it seems to be different , BTW what is your OS  ? Premiere Pro CS6 will only work in 64 bit OS actually, it will get install on only 64 bit OS so that might be the reason you have only Encore present not Premiere Pro.

  • Adobe Premiere Pro CS6 (mac) will not completely launch.

    After a few weeks idol my Adobe Premiere Pro CS6 (mac) will not completely launch. It tells me a serious error has occurred, it shuts down and the circle continues. I've even reloaded  the app and it happens again. I did upgraded to Yosemite but I can't find anyone else having probs with Yosemite. Any ideas. No luck on the adobe site.

    >did upgraded to Yosemite
    CS6 is about 3 years old... even the latest Cloud versions had to have updates to be compatible... since you have "reloaded" (was that a full uninstall and reinstall?) I have no other suggestions

  • Unable to Launch Adobe Premiere Pro CS6 using High-Performance on AMD Radeon Graphic Card

    I have been unable to launch Adobe Premiere Pro since installing it with the error message "Adobe Premiere Pro could not find any capable video play modules. Please update your video display drivers and start again"
    Here are my specs:
    Lenovo Ideapad U400
    Windows 7 (64bit)
    Intel i5 2.5 ghz processor
    AMD Radeon 6470M graphics card
    The only occasion during which I have successfully launched Premiere Pro was after reverting to the default graphics card on my computer and uninstalling AMD Radeon, otherwise, I have tried to change Premiere Pro to run on High-Performance on Catalyst Control Center to no avail, I do not wish to revert to the Standard Graphics Card as it slows down my computers performance one hell of a lot, neither do I wish to have to constantly uninstall and reinstall my AMD Radeon Graphics Card when I use Premiere Pro. Thank you for your time.

    Update:
    - with Intel (R) HD Graphics Card disabled, Catalyst Control Center reports that no AMD Graphic card is installed
    - using Device Manager under Control Panel, AMD Radeon 6470M was verified to be up-to-date
    - Premiere Pro works so long as I disable the Intel card before launch, however, I re-enable it upon startup to get rid of the 800x600 resolution
    - AMD Mobility Radeon Driver Verification Tool is unable to verify and update my driver, refers me to lenovo to update it.
    - My graphics card is up-to-date as verified by lenovo
    - Intel (R) HD Graphics Card now up-to-date
    - Display currently mainly using Intel (R) HD Graphics Card (Possibly why it caps resolution at 1024x768 when disabled) I'm not sure how to switch the main Graphics Card used, Catalyst Control Center doesn't seem to have the option.
    - when disabled, computer reverts to vgasave instead of Radeon
    - Disabling Radeon does nothing to existing display
    - After updating my Intel card, Catalyst Control Center reported CCC was not supported by the current display adapter
    - CCC worked after rolling back Intel card
         From what I infer, I believe the problem to root from my intel card being the main card used, if there is anyway to switch my radeon card to the default instead of the Intel card, do tell me, I believe this may solve the problem, I apologise for troubling you guys, and I'm starting to feel that I shouldn't be troubling Adobe with my problem with AMD, this discussion is probably really out of place but I hope it will help out others with a similar problem.

  • Premiere Pro CS6 serious error has occurred, crash troubleshooting

    ERROR MESSAGE: Sorry, a serious error has occurred that requires Adobe Premiere to shut down. We will attempt to save your current project
    Problem: Starting last night Premiere would crash with this error message. This has been happening increasingly more over the past couple weeks, but starting last night and today - it has happened so much that I cannot get more than 5 minutes of work done without it crashing. It has happened on saves, renders, playback, switching active timelines, removing the mojo effect from a clip, and while sitting dormant. I’ve had the computer less than a year and hope that it is not a serious problem with my RAM or graphics card.
    Using Premiere Pro CS6 - subscription based with latest update installed
    SPECS:
    MacBook Pro Retina, Mid 2012
    Processor: 2.6 GHz Intel Core i7
    Memory: 8 GB 1600 MHz DDR3
    Graphics: NVIDIA GeForce GT 650 M 1024 MB
    Software: OS X 10.9.1 (updated after problem started)
    (nothing external from factory setup in terms of hardware)
    Use an External USB 3.0 7200 RPM drive from OWC for project files
    Use an External Seagate 3 TB drive for media storage
    Using all DSLR footage from Canon 6D, Canon 5D mk II, and Canon 60D and audio from external recorders (.mov, .WAV, .wav files)
    Third-party effects or codecs: Use Pluraleyes 3.0 and Mojo color from Red Giant
    I realize this is a general error message and there are several forums posted from mostly more than 5 months ago. I cannot seem to find an answer that will help me. Here is what I have already tried:
    1. updated to Maverick
    2. checked for updates for Adobe software
    3. Cleared the Media Cache
    4. Switched from CUDA to software only
    5. Updated CUDA and switched back to CUDA in premiere
    6. Held SHIFT while starting up (nothing seems to happen or pop up on screen at least)
    Next:
    —Going to uninstall Premiere and reinstall.
    Any suggestions or possible fixes are great appreciated. What should my next step be?

    UPDATE:
    STEP 1:
    Uninstalled and reinstalled Premiere - worked without crashing for the longest time since yesterday. After 1 hour of running - it crashed once again with same error message and same report (see below).
    Same as before:
    Exception Type:  EXC_BAD_ACCESS (SIGSEGV)
    Exception Codes: KERN_INVALID_ADDRESS at 0x0000000000000000
    STEP 2:
    --Updated the RED GIANT plugin "mojo" (minor coloring software)
    This worked for less than 10 mintues and then crashed again - but this time with different exeception details (I'm not sure what these mean)
    Crashed Thread:  2
    Exception Type:  EXC_BREAKPOINT (SIGTRAP)
    Exception Codes: 0x0000000000000002, 0x0000000000000000
    Application Specific Information:
    *** CFRelease() called with NULL ***
    STEP 3:
    Going off of the idea that it may be the plugin causing the issue (since it needed to be updated) I went into the project and deleted all of the files containing this effect in this project file (note: i have used this for 10+ projects on this computer with no trouble).
    I thought it was fixed, from about 8:00 PM - 11:45 PM no crash - then as I was playing back clips - crashed again.
    I have been loosely following these guidelines: http://helpx.adobe.com/x-productkb/global/troubleshoot-system-errors-freezes-mac.html
    I am not sure where to go from here - should I continue into the "advanced troubleshooting" even though I'm not sure if any of these things are related.
    IMPORTANT NOTE: I have launched two other Premiere Project Files (from previously completed projects) successfully without crashing. I tested a few things in the projects before returning to the problem project. If I suspect there is a problem with the file in particular - how do I find out what is causing the problem?
    --I already removed MOJO effects thinking that could be the issue from the last files that were
    --I have already gone back to a previous version from a week ago and imported the Sequence I needed. Still crashed.
    I have sent 5+ reports to Adobe on the crash. Any feedback into this is much appreciated.

  • I own an iMac 2011. I am unable to reinstall and launch premiere pro cc. We I attempt to run the program I get a error message saying that the adobe application manager is missing or need to be updated. I reinstalled the manager but I am still unable to l

    I own an iMac 2011. I am unable to reinstall and launch premiere pro cc. We I attempt to run the program I get a error message saying that the adobe application manager is missing or need to be updated. I reinstalled the manager but I am still unable to launch any of my programs from adobe. I tried to do a trail with a program and I am still getting the same message.

    Davinci thank you for the update.
    Please utilize any available uninstallers that are located in the Applications/Utilities/Adobe Installers folder.  Once all of the available uninstallers have been run you will then want to rerun the CC Cleaner Tool.  You can find directions on the use of the CC Cleaner Tool and a download link at Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6 - http://helpx.adobe.com/creative-suite/kb/cs5-cleaner-tool-installation-problems.html.  After the CC Cleaner Tool is run then please reinstall the Creative Cloud Desktop application from Creative Cloud Help | Creative Cloud for desktop.
    The CC Cleaner Tool is designed to be used after running the uninstallers.  Without running the uninstallers first then a complete removal may not be possible.

  • How do I open Premiere Pro CS6 after install

    i keep trying to open the trail version of Premiere Pro CS6 ...it says that it's been installed but when i try to open it it just tries to reinstall it again ...HELP . Mac OS Snow L

    It seems that you're running the installer again.
    If the install is successful, it would have created the application directory and files. Look inside /Applications/Adobe/... to launch the software from there.

  • Strange audio problem in Premiere Pro CS6

    Hi
    I have encountered a very strange problem. I am editing a documentary film in Premiere Pro. All material has been shot on the Sony FS 100 camera - imported into PP with the Media Browser. In one interview the last part of a clip has corrupted audio. At one point on the timeline the audio stops playing, and it sounds like a scratch on a vinyl record - two words repeating themselves to the end of the clip (See screenshot of timeline). The images are as they should. When I open the Avchd source clip in VLC the audio is working. When i Import the clip into Final Cut 7 using Log and Transfer the audio is working. My only other option would be that there is a software problem with Premiere Pro CS6. Any ideas of how to fix this issue?
    Version PP: 6.0.1
    Source footage: MPEG-4 AVCHD (1080/25p - Sony FS100)
    Version mac: OS x 10.8
    Model Name:     Mac Pro Mid 2010
    Processor Name:     Quad-Core Intel Xeon
    Processor Speed:     2.4 GHz
    Number Of Processors:     2
    Total Number Of Cores:     8
    Memory: 20 GB
    Graphics Card: NVIDIA GeForce 570 GTX
    Third-party I/O: Matrox MXO2 with Max
    Mercury Playback Engine: Software mode

    One similar, potential problem, that can develop, is when the Conforming process is interrupted, before it completes 100%.
    A quick way to rule that out, would be to navigate to the Media Cache files, and Delete the CFA and PEK (Waveform Display) for that Clip, outside of Premiere Pro. Then, when you launch PrPro and Open your Project, the program will recreate both of those files. There is a little progress bar, that many do not notice. Let it complete 100%, before even touching the computer. Test.
    I hope that it is as simple as that.
    Good luck,
    Hunt

  • I downloaded Premiere Pro CS6 trial on my mac and it doesn't show up! Any Ideas?

    I was looking into buying adobe Premiere Pro CS6, so I signed up for the trial and signed in and downloaded it. But straight after downloading it, NO applictaion showed up in my applications folder!
    I don't think I've done anything wrong, I've done the same thing for Premiere Pro as I did for my Adobe Photoshop.
    Any Ideas Anyone?

    Locate the downloaded file:
    1. try to launch the file and see if you get prompts.
    2. drag the downloaded file to applications folder

  • Premiere Pro CS6 won't open...

    I have the Adobe Creative Cloud, and I installed Premiere Pro CS6 Family. I was able to open it once, but now that I have tried launching it recently, it comes up with an error message saying "This application has failed to start because MSVCR100.dll was not found. Reinstalling the application may fix this problem". What exactly does that mean?

    It means that the Microsoft Visual C++ Resource library got corrupted. Reinstalling can help, because that is the first step of the installlation process. The alternative is to go to the Microsoft site and download the latest C++ libraries and install them manually.

  • Premiere Pro CS6 importing .mp4 = "The file has no audio or video streams."

    Hi,
    When I import an MP4 clip into Adobe Premiere Pro CS6, I get the following message:
    "File Import Failure
    151_0010_01.mp4
    Error Message
    The file has no audio or video streams."
    I have the latest Quicktime, and I have reinstalled Premiere Pro CS6 a few times already.  If anyone knows a fix for this, I would greatly appreciate it.  My system and clip info are found below.  Thank you, Robert.
    OPERATING SYSTEM
    Win 7 Ultimate 64bit
    CLIP INFO
    Complete name                         \BPAV\CLPR\151_0009_01\151_0009_01.MP4
    Format                                   : MPEG-4
    Commercial name                    : XDCAM EX 35
    Format profile                         : Base Media / Version 2
    Codec ID                                : mp42
    File size                                : 1.76 GiB
    Duration                                 : 7mn 5s
    Overall bit rate mode                 : Variable
    Overall bit rate                         : 35.6 Mbps
    Encoded date                             : UTC 2009-07-19 04:22:10
    Tagged date                              : UTC 2009-07-19 04:22:10
    Video
    ID                                       : 1
    Format                                   : MPEG Video
    Commercial name                          : XDCAM EX 35
    Format version                           : Version 2
    Format profile                           : Main@High
    Format settings, BVOP                    : Yes
    Format settings, Matrix                  : Custom
    Format settings, GOP                     : M=3, N=15
    Codec ID                                 : 61
    Duration                                 : 7mn 5s
    Bit rate mode                            : Variable
    Bit rate                                 : 34.0 Mbps
    Maximum bit rate                         : 35.0 Mbps
    Width                                    : 1 280 pixels
    Height                                   : 720 pixels
    Display aspect ratio                     : 16:9
    Frame rate mode                          : Constant
    Frame rate                               : 29.970 fps
    Color space                              : YUV
    Chroma subsampling                       : 4:2:0
    Bit depth                                : 8 bits
    Scan type                                : Progressive
    Compression mode                         : Lossy
    Bits/(Pixel*Frame)                       : 1.231
    Stream size                              : 1.68 GiB (96%)
    Language                                 : English
    Encoded date                             : UTC 2009-07-19 04:22:10
    Tagged date                              : UTC 2009-07-19 04:22:10
    Color primaries                          : BT.709
    Transfer characteristics                 : BT.709
    Matrix coefficients                      : BT.709
    Audio
    ID                                       : 2
    Format                                   : PCM
    Format settings, Endianness              : Big
    Format settings, Sign                    : Signed
    Codec ID                                 : twos
    Duration                                 : 7mn 5s
    Bit rate mode                            : Constant
    Bit rate                                 : 1 536 Kbps
    Channel(s)                               : 2 channels
    Sampling rate                            : 48.0 KHz
    Bit depth                                : 16 bits
    Stream size                              : 77.9 MiB (4%)
    Language                                 : English
    Encoded date                             : UTC 2009-07-19 04:22:10
    Tagged date                              : UTC 2009-07-19 04:22:10

    I encountered a similar problem.  I had quicktime files that would play in the quicktime player from the desktop, but wouldn't import the files "the file has no audio or video streams".  I had just reinstalled quicktime, and Premier with no change.  Finally realized that we had Barracuda protection that was at fault.  It was preventing communication to the quicktime codec and thus Premier could not interpret the footage.  Another symptom, I would also launch After Effects and it would tell me that quicktime wasn't installed.
    I solved this by uninstalling Barracuda.  We reported the fault to Barracuda, and have not seen any change in the software. 

Maybe you are looking for

  • Portable Home Directories in 10.8 Server?

    I have a Mac mini Server running 10.6.8. Now that 10.8 is out, Apple will probably stop supporting 10.6 (as is their policy) and that means either slowly eroding security or moving to 10.8. I have been looking at the documentation and it seems undern

  • [iPod Touch 4g] Cannot restore

    Nearly a week ago I jailbroke my iPod so i could mimic the look of iOS 7 on my iPod Touch 4th Gen running iOS 6.1.6 After plenty of use. I have decided that I would no longer like to use a jailbroken firmware. So I decided to restore it back to an iO

  • Creation of Material's PLANT Configuration

    Hi Gurus! i'm trying to find a way to CREATE MATERIAL CONFIGURATION for PLANT level (MARC-STDPD field + configuration) i found MATERIAL_SAVE_CONFIGURATION and i can use it to UPDATE an existing configuration, but i cannot find how to CREATE a new one

  • Banner Ads Help

    Hello Everyone! I have been desperately trying to find help on how to properly insert Banner Ads to a web page I am trying to create using Dreamweaver CS4. Cn anyone help me? I want to insert Banner ads like Google ads or 125 X125 ads from places lik

  • Personal 8i

    Unable to start SQLPLUS. Getting the error 'NO MESSAGE FILE FOUND' Please help.