Launching RRMX t-code in EP 6.0 w/ SEM-BPS 3.2

Hi,
I have a request to launch the BEx Analyzer from the portal, EP 6.0 SP14, to utilize the SSO. So I created an iView and it works.
The problem that is occurring now is when you launch the analyzer from the portal, there is an R/3 screen that also launches with RS00 running. There is the option to start the Administrator Workbench, which then launches RSA1, which we do NOT want the users to see.
My question is, is there a way to stop the R/3 GUI window from launching? Are there some parameters that I need to add to the iView properties?
Cheers,
Kevin

Have you found a solution for this?

Similar Messages

I tunes at launch shows (-42110) code error and doesní reconize or sync wirT. Ipod

I tunes at launch shows (-42110) code error and doesní reconize or sync with. Ipod
Could get me some help?

Pay no attention to iinami, the amount of replies to people saying their handsets must have been jailbroken everytime iTunes throws out an error is tremendous. (Clearly you don't need to have any real knowledge to get to level 3 on these forums, let's hope apple's geniuses know a lot more than some of their customers.)
http://support.apple.com/kb/TS3694
Solution below.
Error 9
This error occurs when the device unexpectedly loses its USB connection with iTunes. This can occur if the device is manually disconnected during the restore process. This issue can be resolved by performing USB troubleshooting, using a different USB dock-connector cable, trying another USB port, restoring on another computer, or by eliminating conflicts from third-party security software.

Launch RRMX in BSP application (WEB)

Hi Experts,
what i need to do is to launch rrmx (or any other BW transaction) in a BSP application (web interface builder...)...is it possible? And How?
Any hints will be rewarded.
Thanks in advance,
FAbio.
Message was edited by:
Fabio Cappabianca

Thanks for the reply...how can i use rsbbs in a web interface?
Thanks,
Fabio.

VBA code not working in SEM-BPS 3.2

We are currently running on BW 3.1 and SEM-BPS 3.2 environment. I am trying to create a screen in excel with VBA code doing validation on user input. For some reason the code works perfectly fine in standalone Excel. But when it comes to BPS, the code does not work. Is there any setting to invoke the code? Any help would be greatly appreciated.
Thanks

Bindu,
Thanks for your reply. I checked in the layout builder and both the VBA Macro - SAPAfterDataPut and SAPBeforeDataGet are checked. Below is the code:
Thanks again!
Private Sub Worksheet_Change(ByVal Target As Range)
If Not Intersect(Target, Range("D1:D1000")) Is Nothing Then
    If Target.Value = "183998" Or Target.Value = "192999" Or Target.Value = "0000183998" Then
    ActiveSheet.Unprotect
    On Error Resume Next
    'Application.EnableEvents = False
    MsgBox "You cannot plan on TPIs 0000183998 Or 0000192999"
    Target.ClearContents
    'Application.EnableEvents = True
    ActiveSheet.Protect
End If
End If
End Sub

SEM-BPS code

Dear Friends,
Req: Varaible gets current or entered month value and the value of variable will be summed up till 012th month. It should not go > 12. Eg: Assum the entered value = 007 and the calculation goes 008, 009, 010, 011 & 012.
In order to fullfill the customer req. Iwe need to apply the below logic. We have done this code in SEM-BPS planning function.
DATA PER TYPE 0FISCPER3.
DATA FPER TYPE 0FISCPER3.
PER = VARV (YFROMPER).
DO.
FPER = PER + 001.
if PER > 001 AND PER <= 12.
YDPT_PRKG, PER} = {YDPT_PRKG, FPER}.
Else.
Exit.
Endif.
ENDDO.
But, this above code is not work as expected and it's executing infinite...Please look into the code and correct me if any syntex or logic issue.
Thanks in Advance for kind support.
Best Regards,
KS

Hey KS,
I'm assuming you've solved this already but if not . . .
Looking at the code below, you see to only hit the ELSE condition and hence exit if PER is not between 1 - 12. Yet you only increment FPER so PER never changes and this loop will run forever.
Might also want to increment the total:
{YDPT_PRKG, PER} = {YDPT_PRKG, PER} + {YDPT_PRKG, FPER}.
Hope this helps.
Regards,
Dan

7.1.1 - Not launching. Error code -600

Help! I recently upgraded itunes to 7.1.1 (as well as Mac OS to 10.4.9) and ever since Itunes has simply refused to open. When I try from the Dock it doesn't respond, but appears as "not responding" in the Force Quit menu. When launched from a finder window I get an "unexpected error" error code -600.
I have tried reinstalling both OS 10.4.9 and itunes 7.1.1.
Any ideas? I am at my wits end!

I took the advice of one of the other people on here and deleted the ~/user/library/cache folder. After a reboot this worked. i would move the folder to the desktop first and then reboot and re-try iTunes. I have not upgraded to 7.1.1 yet as i wanted some stability since I got 7.1 working.

Problem in RRMX t-code

Dear friends,
I am unable to execute T-Code RRMX in BW7.0
We have installed MS Office 2003 in my XP Desktop.
Our patch level in BW Server is SP10.
When we execute RRMX we are getting below msg
Please install Excel as viewer.
Message no. BRAIN871
We have already gone thru the OSS SAP NOTE 160995, but we are unable to fix that Issue.
Please help me in this regard
Thanks,
Srini

We were facing same problem
but we are using office XP try this..
do this first time on each pc and later u can open directly from RRMX.
from start menu > business explorer> business explorer
and start Analyzer (3.x).
It will ask for user name password client etc
logged in once and run any query..
thats it..
next time u will not face problem when u run RRMX.

Error when launching transaction code CRMBS02

Hello all...whenever we attempt to launch the t-code CRMBS02 or BS02, we get a popup that says:
Error in object editing: This syntax cannot be used for an object name
Selecting the documentation drop down provides:
Message no. TK103
Diagnosis
The syntax of the transferred objects is incorrect. R3TR BSVS made this check.
This could be caused by the following:
The object type R3TR BSVS is unknown
The syntax of the object name is incorrect
The object is a component of a system object
System Response
The function terminates.
Procedure
Correct the syntax.
Any suggestions? When this occurs, it does not enable editing and allows for display only. I have SAP_ALL assigned to the user, so I don't see any authorization errors when I trace the transaction code.
Suggestions?
Thanks in advance!
Joe

Hello Joe,
Tasks template of type T and Workflow Task of type WF, are no more used after release 45b. The were substituted by the TS Templates and by Workflow Template.
Please notes: 114811 -
From release 4.5 onwards only WS/TS tasks can be created via the standard workflow editor transaction however WF tasks created in previous releases may still be maintained. If it is important to be able to create WF flows in release 4.5 then you may still do so with transaction PFWF. This transaction has been removed from the menu to encourage the use of WS flows wherever possible.
A copy utility to copy WF flows and it's components to WS flows will be made available to speed up the transfer to client independent flows.
"Check also note: *152871 Release Upgrade considerations for workflow 3. WS / WF workflows (all releases)
"From Release 3. 1 onwards, it is possible to create customer workflows
of type 'WS'.
Solution: If you have 'WF' workflows, they will continue to run after an upgrade. You can modify them too. However, some of the new features of future releases only apply to 'WS' workflows. See note 114811 for a complete discussion of this subject.
You should pass from T and WF templates to the New WS and TS templates.
1) In relation to workflows of type 'WF' (Workflow Task) and task 'T' they have not been developed since release 40B, instead the Workflow Template (WS) was introduced and Tasks 'TS'. This error has seldomly
been observed in the case of trying to work with WFlow tasks of type WF instead of type WS.
Existing WF will run also in higher releases, however if you change a WF task in a higher release it may produce dumps or numerous errors. This is valid too for Tasks.
Please refers to note 114811.
If you want to change them please copy them first to templates type WS or TS rather than WF or T. Use PFTC in order to copy them and then you can make the changes and you will have much more functionality than type
WF or T.
Additional Inforamtions:
Note 1068627 - Composite note about workflow upgrade
thanks
Willie

Error code 13010 - i-Tunes won't launch!

Established i-Tunes user on OSX 10.6.3 - out of the blue tonight, i-Tunes won't launch giving error code 13010. Subsequently downloaded 9.1, restarted, still same error code. Any help urgently appreciated!

try if this user tip helps:
Jim VanLeeuwen wrote:
Try removing the Genius database. In the "Finder" go to the /username/Music/iTunes/ folder and delete the "iTunes Library Genius.itdb" file. This may allow the program to launch again. This file will be recreated upon first use of the "Genius" feature.
JGG

Get ID from database, launching a query from code and set NOCOUNT clause

Hello,
I need to extract some id from some table in mydatabase. I launching query from code.
I would like to know if it is correct what I do
SET NOCOUNT ON
SELECT ID FROM tblID
SET NOCOUNT OFF
it is right to set nocount on at the beginning and if you need to reset it in the end.
Many thanks
www.Photoballot.net

When SET NOCOUNT is ON, the count is not returned. When SET NOCOUNT is OFF, the count is returned.
SET NOCOUNT ON prevents the sending of DONE_IN_PROC messages to the client for each statement in a stored procedure. For stored procedures that contain several statements that do not return much actual data, or for procedures that contain Transact-SQL loops,
setting SET NOCOUNT to ON can provide a significant performance boost, because network traffic is greatly reduced.
It won't have any major impact in your case however like they say its good to have it.
To read more about see -
http://msdn.microsoft.com/en-us/library/ms189837.aspx
If this post answers your query, please click "Mark As Answer" or "Vote as Helpful".

UWL HTML Gui is not launching T-Code

Helllo Experts,
We have a workiten in UWL that launches a transaction code in ECC when you click it.
When I set the SAP Gui type to Win Gui it launches the t-code. If I change it to HTML Gui it does not open the t-code, I don't get any error message and it goes straight to the navigation screen.
In our development environment, the html gui works perfect. We have the problem in our QA environment.
Thanks
Ismail

Hi,
did you check that ITS is working fine in your QA.
check webgui under ITS working fine or not under sicf.
Thank you
swapna

I am trying to have some LabVIEW code called in a New thread exit when the testStand sequence terminates

I have a Sequence that launches a sequence in a New Thread that happens to launch some LabVIEW code. The problem is when the LabVIEW code finishes, it will not close even when the TestStand sequence terminates. Is there a way to tell this LabVIEW code to Exit, I've tried the Quit LabVIEW function, but that causes a C++ RunTime Error. The LabVIEW code does end though, and it is set in the VI properties to:
Checked - Show Front Panel When Called
Checked - Close Afterwardds if originally closed
The sequence call that the LabVIEW code is launched from has the following options:
- New Thread
Unchecked - Automatically wait for the thread to complete at the end of the current sequence
Unchecked - Initially Suspended
Unchecked - Use single threaded apartment
Any clues on this would be appreciated.

Hi ADL,
Everything should close correctly if you check the checkbox "Automatically wait for the thread to complete at the end of the current sequence" in the thread settings.
With it unchecked, I am seeing the behavior you are.
Gavin Fox
Systems Software
National Instruments

Net-Weaver 4.0 installed on Windows-7 . and RRMX is not working...

Dear Experts,
We are using Net-Weaver 4.0 , BW 3.5 and Office-2007. But recently we have installed these over WINDOWS 7.
Previously it was working fine with WINDOWS - XP.
And now after installation , when I put RRMX transaction. I am getting error.
Please suggest , What shall I do ?
Thaks,
Utpal

Hi Utpal:
Probably you need to install a Front End Patch (FEP), with an "S" account you can download it from the SAP Marketplace.
What is the error message you get? search for related SAP Notes with details on this issue resolution. For example SAP Note 1533608 recommends installing FEP 400 of BW 3.5 Add-on of GUI 720 to solve issues with RRMX Transaction Code.
To download the file do the following.
1. Open the link https://websmp102.sap-ag.de/support
2. Click on the Tab "Software Downloads"
3. Click on the Section "Support Packages and Patches"
4. From the Menu on the left Click on "Browse our Download Catalog" option.
5. Click on the link "SAP Frontend Components"
6. Click on "BI ADDON FOR SAP GUI"
7. Click on "BW 3.5 ADDON FOR SAP GUI 7.20"
8. Click on "Win32" to display the list of available FEP for download.
Regards,
Francisco Milán.
Edited by: Francisco Milan on May 26, 2011 10:00 AM

Code to read local notepad.txt from applet

Hi.
Further to my (unanswered) queries about reading a notepad.txt file from the local directory i.e. the same directory from which the html and applet were launched, the following code is supposed to be able to read the local file. It failed to do so both in Netscape 7.1 and in IE5
I've also received conflicting advices : some says we can read local files without using a signed applet or chaning the ACL, whereas others I'll need to use signed applets and / or acl to allow the applet to read a local file.
My research has shown that java applets are supposed to be able to read local files. Has something changed:
public class FileAccess extends Applet
   implements ActionListener {
   Button loadButton, saveButton;
   TextField filename;
   TextArea content;
   String browserName;
   boolean securitySupported = false;
   public void init() {
     setLayout(new FlowLayout());
     Label label =
       new Label("Simple file editor");
     add(label);
     loadButton = new Button("Load");
     saveButton = new Button("Save");
     add(loadButton);
     add(saveButton);
     loadButton.addActionListener(this);
     saveButton.addActionListener(this);
     filename = new TextField(20);
     add(filename);
     content = new TextArea(5,20);
     add(content);
     browserName = System.getProperty("java.vendor");
     if (browserName.indexOf("Netscape") > -1)
        securitySupported = true;
     setSize(200, 200);
   public void actionPerformed(ActionEvent evt) {
     if (securitySupported) {
        if (evt.getSource() == saveButton) {
           PrivilegeManager.enablePrivilege("UniversalFileAccess");
           try {
              FileWriter aWriter = new FileWriter(filename.getText(), false);
              aWriter.write(content.getText());
              aWriter.flush();
              aWriter.close();
           catch(Exception e) {
             e.printStackTrace();
        else if (evt.getSource() == loadButton) {
           PrivilegeManager.enablePrivilege("UniversalFileAccess");
           try {
              BufferedReader aReader =
                 new BufferedReader
                    (new FileReader(filename.getText()));
              content.setText(aReader.readLine());
              aReader.close();
           catch(Exception e) {
             e.printStackTrace();
      else {
        getAppletContext().showStatus("security not installed");
}

Hi acinhk,
I read your note with great interest. I am trying to solve almost exactly the same problem as you are -
Reading a .txt file in IE5 from the same directory where the html and the applet were lauched.
Your code looks fine to me.
My code is very similar, and again generates a security exception - as I am having the same problem you had getting around Java security.
If you have been able to solve the problem, can you please let me know what you did.
Any modifications to your sample code that actually made it work would be greatly appreciated.
Also, is signing the applet to read a local file under IE5 really necessary ?
Can the file be read from the local IE file system without signing the applet ?
Please let me know your thoughts.
Thanks !
drbob

ITunes U launcher directs *some* computers to Store homepage instead

I'm the iTunes U administrator for my college. Only two of my users have reported this problem, and I cannot reproduce the error anywhere other than on their computers.
Behaviour:
Launcher button (custom code) is clicked. iTunes starts, Store is opened.... but the college's iTunes U page is not retrieved. Instead, only the iTunes Store home page is displayed.
Troubleshooting already done:
0. Behaviour reported for the first time today; initial user had not logged in for a week, so it could have been any time since then. No major changes done to initial user's computer in that time.
1. Turned on debugging, verified that credentials and timestamp being sent are valid. Following message displayed: "Because the received signature and time were valid, the received identity and credentials were accepted by iTunes U. With these credentials, you have browsing, downloading, uploading, and editing access to the requested destination."
2. Used same link as multiple users (with different credential levels), on same computer; behaviour identical.
3. Used same link as multiple users (the same ones) on a different (unaffected) computer, everything works fine.
The profiles of the computers used:
Windows XP, iTunes 10.3.1 --> multiple users, no success
Windows 7, iTunes 10.3.1 --> multiple users, success
Windows XP, iTunes 9 --> multiple users, no success
iMac, iTunes 10.1 --> multiple users, success
iMac, iTunes 10.3.1 (same machine, post upgrade) --> multiple users, success
I haven't found any reports of similar behaviour online or in this forum (after a 15 minute search) so decided to post.
Has anyone encountered this problem? If so, how did you fix it?
It is crucial that I restore access to my staff user so that he can continue his work. Further crucial if any student users encounter similar behaviour, as this will interrupt their time-sensitive coursework, and I need to be able to help them resolve the issue.
iTunes U staffers? other admins? Please help!
Cordially,
JRob

What is the name of your private site?
-Thanks

Launching RRMX t-code in EP 6.0 w/ SEM-BPS 3.2

Similar Messages

Maybe you are looking for