Launching the Debug never complete

hi everybody and thanks for your attention,
when i launch my application in debugging mode, it starts the browser but never complete, it remains pending and gives no message.
after about a minute i recive this popup
Failed to connect; session timed out.
Ensure that:
1. You compiled your Flash application with debugging on.
2. You are running the debugger version of Flash Player.
can someone help me?
thanks
gpleone

Hi gpleone,
Are you running on Win or on OS X?
In either case, try installing the latest Debug Player 10.1 builds from here, and see if that helps:
http://www.adobe.com/support/flashplayer/downloads.html
-Chris

Similar Messages

My Iphone was previously Jailbroken, but then I tried to update it and the update never completed. So i deleted Cydia off of the phone, then I tried to update it again. It still didn't work, so I tried to restore it, but it didn't work error 21

My Iphone was previously Jailbroken, but then I tried to update it and the update never completed. So i deleted Cydia off of the phone, then I tried to update it again. It still didn't work, so I tried to restore it, but it didn't work error 21. Now my phone is a paper weight, i just need to restore my phone so i can update it and reload my phone back to normal.

The discussion of Jailbroken Devices is against the Terms of Use of this Forum.
Try google...

I just registered my calendar with iCloud but the process never completes "moving calendar to iCloud" keeps running. How do I solve this?

Have been trying to upload calendar to icloud but process never completes. Have forced quit and restarted but makes no difference. Any ideas?

Ignore this.
I worked it out. After selecing mail, contacts and calanders, you get a choice to symc only some data and then another choice to chose which.
All my iCloud data (except the extra Outlook category colouring) was still there.
If you need specifics on how it works, there are sone very good links at this website http://www.slipstick.com/outlook/icloud-and-outlook-problems/. You won't find Apple giving this much away.
Keep taking the backups
Tony

I'm trying to install adobe acrobat XI pro, the trial version. The Install Download Assist pops up but the program doesn't install. I do see a file named XI Pro, but not a program. It seems the program never completely downloads. Any suggestions? Thanks.

I've tried to download the trial version of Acrobat XI pro but it's not working. The time bar is active for the download and indicates that it will take two hours. When I come back, the screen has gone back to the "install free trial here" page. I do see a file for XI Pro, but not a program.

try a direct download,
Downloads available:
Suites and Programs: CC | CS6 | CS5.5 | CS5 | CS4 | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 12 | 11, 10 | 9, 8, 7
Photoshop Elements: 12 | 11, 10 | 9,8,7
Lightroom: 5 | 4 | 3
Captivate: 7 | 6 | 5
Contribute: CS5 | CS4, CS3
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

I can't get install OS X Mavericks on my MaCbook AIR. During the stage " installing OS X on Machintosh HD..", the computer keeps resseting successivelly and the installation never completes. What the solution for the installation to finish successfully?

OS X install

When you download Mavericks to the USB drive it's not going to allow you to run the Mavericks installer. You need to buy an external drive then install Mavericks on the drive. You can then boot from the drive to recover your data and install a working OS X on the internal drive.
Recommended Drives
USB 3.0 drives work on USB 2.0 but you do get 2.0 speed. They are cheaper because they are popular PC drives. If you get a new computer you'll get the bump to 3.0 speed. I don’t recommend FW. The newer computers don’t have FW ports. You would need a connector in order to use the drive on a newer computer.
Size: I recommend either the 2T or 3T drives. Often they are cheaper than a 1T drive. The 4T drives have more issues and failure rates.
The Seagate USB 3.0 Backup plus drives come formatted for PC but easy to format in Disk Utility.
Seagate Backup Plus 2TB Desktop External Hard Drive USB 3.0 (STCA2000100) (Amazon only had used drives so I couldn’t get a price)
Seagate Backup Plus 3TB Desktop External Hard Drive USB 3.0 (STCA3000101) $134.99
This Western Digital drive has good reviews: Has a 2 yr warranty. Comes formatted for Mac but I would still format using Disk Utility.
WD My Book Hard Drive for Mac 2 TB (WDBYCC0020HBK-NESN) $99
WD My Book Hard Drive for Mac 3 TB (WDBYCC0030HBK-NESN) $119.99
Check the warranty when comparing. The longer the warranty the better the drive. WD makes cheaper drives but with almost no warranty.
Locally, Best Buy seems to have the best prices.
You can get one drive for both Time Machine and clone, but it’s recommended that you use different drives for each. If the drive dies you lose both types of backup.

Mac - Export H264 Never Completes

I have found that when ever I try to export a sequence to H264 (in CS6), using either the Export button or the Queue button via Media Encoder the export never completes. In media encoder it says 00:00 time left. the file 'appears' to be complete but the temp file has not been deleted.
The same sequence works perfect on windows.
The same sequence can be exported for DVD on a Mac and everything completes fine.
CS5.5 works perfectly for the same sequence on the Mac. CS6 doesn't.
I've already checked / repaired permissions but no change. Any ideas?

There ought to be a sticky post about what users should do when Pr stops working.
First off, eliminate your computer as the problem. Permissions, Disk Warrior, RAM check, etc.
If no help, start with relaunching the app.
If no help, reboot the computer.
If no help, reset prefs (Hold option while launching. Hold option-shift to reset prefs and dump caches).
If no help, try a new project or different media, to eliminate your source footage as being corrupted.
If it happens with any and all projects and footage and fresh prefs, uninstall and reinstall the app.
If no help, post your issue to the list.
If others are having the same problem, file bug report.
https://www.adobe.com/cfusion/mmform/index.cfm?name=wishform

Activity Stream Home Page never completes update

As part of a Photoshop CC subscription I installed Creative Cloud which is set to launch at log-in. I have the Mac version, running OS 10.8.
Now every time I boot up my Mac the Creative Cloud app opens on the Home page with a "whirring circle" and blank screen as if it's trying to update to show my recent CC activty. However the update never completes and the home screen stays blank. All I can do is exit the CC app. I have been forced to change preferences so the app in NOT launched at start-up.
What causes this annoying behavior and how do I fix it?

Hi 208bridge,
Would it be possible to collect the following log files, put them in a zip file and upload them to your Creative Cloud account? And once uploaded, set the zip file as available for download and post the link here?
These would be the log files
ACC.log, NELog.log, PDapp.log (present in your user account temp folder).
You can get to it by putting a %temp% in the run field on Windows
On Mac launch Terminal from Applications > Utilities,
- In terminal type cd ../.. to change up two directories - type ls and you'll see the tmp directory listed (note the l in ls is a lowercase L)
- type cd tmp to change into the temp directory and ls again will list the files in there.
- type cp <name of the file>~/Desktop
You'll have to repeat the process for each file
And the CoreSync*.log found in <user path>\AppData\Roaming\Adobe\CoreSync
-Dave

Should I keep waiting for the Burn to complete?

I Have a 2 hour movie in iDVD 5.0.1 with theme (The rear window of a car) and Scene selection etc. It cranked through :
1. Prepare
2. Process Menus
3. Process Slideshows
4. Process Movies
this all took 9 or 10 hours
5. BURN - Retrieving and Preparing Project .
This has been on the last 1/8 of an inch of the progress bar for 36 hours.
The Burn icon in the lower right is still spinning.
When I hit the Force Quit it DOES NOT say it is not responding as I have seen in the past.
Do I keep going or start over? I have iDVD 6 on an exterbal HD, I could try or maybe a different theme in iDVD 5.
One more thing, I have Burned this iMovie in Toast in 9 hours and I am using a TDK DVD+R DL. I burned with toast on a Verbatim but that obviously did not have the iDVD theme I wanted. I have TDK , Memorex and Verbatim DVD+R DL.
Can anyone help?
Thanks
LargeAL

Bengt,
I have not been able to burn an iDVD yet in iDVD 5 or iDVD 6.
I suspected the length was just a bit too long (2hours 20 min) but I can burn in Toast all day long. It is much simpilar themes etc , but still Toast crank it out on 8 hours.
One othe question: If the burn never completes and I force quit after days is mt DVD+R DL still burnable? Is the dic unusable?
I have and awesome looking movie in iDVD/iMovie and would really like to burn it. Should I split it up into 1.5 hour chuncks? I hate to do that but I have spent weeks off and on trying to burn in iDVD.

Download of newest version never completes itself and am wonerding why?

I have attempted to download newest version. The download never completes itself and the download time has been in upwards of 5 hours. I have am mac airbook.
Thanks

'''[http://www.mozilla.org/en-US/firefox/all/ Download Firefox Full Installer For All languages And Systems]''' {web link}

Linux installation never completed.

Installing $L(com.siebel.analytics.install.AnyStringConstants ,
InstallConfig.ProductName) $P(SiebelAnalyticsProductBean.productNumber). Please
wait...
And the installation never completes, I have made many tests, leaving installation in many ranges of time, from 5 minutes to 8 hours and never complete, the version I am installed is OBIEE 10.1.3.4.1.
If anyone have a solution for this, I really appreciate.

Please refer to the following link:
http://www.google.com/search?q=InstallConfig.ProductName%29+%24P%28SiebelAnalyticsProductBean.productNumber%29&ie=utf-8&oe=utf-8&aq=t&rls=org.mozilla:en-US:official&client=firefox-a
Its returning bunch of threads with similar error across different OS's.
Hope this helps.
Thanks,
-Amith.

Captivate 8 Installer Win 8 never completes initializing

I've upgraded to a new computer with Windows 8. I've downloaded Captivate 8 and allowed the packages to create the installation directory. I am using a SSD boot drive, and I am installing applications on a secondary drive. I'm following the instructions in the ReadMe document. When I run the Set-up application as Administrator, the installer never completed initializing, but "disappears". If I try to run the installer again, I get a message that the Adobe Installer is already running. I see the Adobe Application Manager running in the background, but I'm stuck.
I've double-checked the hardware requirements, and everything is good. Is there something simple I'm missing? Thanks for any help in advance!
Mary

Here's the final update on this, again in case someone runs into something similar.
The issue wasn't with installing Captivate on a secondary drive. I had another secondary drive that was causing the huge lag. After fixing the problem with that one, Captivate installed like a champ.
Use the Task Manager > Performance tab to identify hardware that may be causing issues.
Fix any hardware issues.
Try to install Captivate again.

Profile Manager Active Tasks never complete, are always pending

I'm using OS X Server 3.2.2 on OS X 10.9.5. I'm attempting to push changes to a device or device group (iMacs in this case), but the task status is always pending and the task never completes. However, when I manually download the Enrollment Profile on a client machine, it will contact the server and grab the device and device group profiles during the initial enrollment. We're not blocking any ports and the server and client are both on the same VLAN and subnet. I'm stumped as to why I'm seemingly only able to communicate to the server from a client and not the other way around. I appreciate any help and suggestions. Thanks.

Hi dankgus, I was reading this article which explains how the mechanics of this work.
http://www.justinrummel.com/how-apns-works-with-mdms-that-manage-osx-and-ios/
I then thought about your firewall comment, when I configured my firewall to work with my Mac MDM I used this Apple KBA ------> http://support.apple.com/kb/ht5302 however I did not open TCP:443 for security reasons. I actually thought this was just for device enrollment and management however it looks like the iOS device might actually require it to function properly. I opened the port and ran a device update which worked. I think it worked ok initially because internally users can get to the MDM over TCP:443 through our split DNS and as soon as they took their iOS devices out of the reach of our corp WIFI it stopped working. I will observe the results and report back and of course I welcome comments.

Send Unix Command 'reboot' never completes

I'm going to upgrade the OS on a bunch of machines with the software update command line utility.
It's a simple one liner from ARD, send unix command. I want to add a second line with either reboot or shutdown -r now, but when I do, the taks never completes.
The machine does indeed reboot properly, but the task in ARD never appears to stop.
Why is that?

It never officially completes because the system reboots before the ARD client can report back the successful completion of the task. It's sort of like you asking someone to disconnect your telephone and then wanting them to call you to tell you it's been done. I know of no way to send the reboot command as a UNIX command without the ARD task hanging waiting for the "completion", but perhaps someone else here will have an idea. I just wait for the updates to complete and then I use the ARD Restart command rather than a UNIX command.

I am able to load some pages from a particular website while other pages from the same site give the error "Firefox has detected that the server is redirecting the request for this address in a way that will never complete."

I am able to access some directories on the website without any problems while I get the "Firefox has detected that the server is redirecting the request for this address in a way that will never complete." error for other directories of the same site.
== URL of affected sites ==
http://www.safelistgrande.com

Suddenly from yesterday I am getting this error while trying to opening gmail

Outlook.office365 debug unable to launch the IIS Express Web server 49152

Using office365 portal to test a mail app.
I am using VS2013 and have deployed from VS2013 to my office365 portal.
During the process of starting the debug of the mail app and window pops up stating:
"Unable to launch the IIS Express Web server.
Port '49152' is in use."
Is this error message being given because the portal is refusing the connection or is this from being generated from my PC?
this is from my "Immediate Window" page:
Exception was thrown at line 70, column 21 in https://outlook.office365.com/owa/?realm=cisco234.onmicrosoft.com
0x800a01ad - JavaScript runtime error: Automation server can't create object
Exception was thrown at line 34, column 25599 in https://outlook.office365.com/owa/prem/15.0.913.9/scripts/preboot.js
0x800a139e - JavaScript runtime error: SyntaxError
Exception was thrown at line 82, column 543280 in https://outlook.office365.com/owa/prem/15.0.913.9/scripts/boot.worldwide.0.mouse.js
0x800a01ad - JavaScript runtime error: Automation server can't create object
Exception was thrown at line 2, column 781790 in https://outlook.office365.com/owa/prem/15.0.913.9/scripts/boot.worldwide.1.mouse.js
0x800a01b6 - JavaScript runtime error: Object doesn't support property or method 'get_$5oW'
Exception was thrown at line 2, column 604470 in https://outlook.office365.com/owa/prem/15.0.913.9/scripts/boot.worldwide.1.mouse.js
0x800a138f - JavaScript runtime error: Unable to get property 'get_$1Qf' of undefined or null reference
Exception was thrown at line 2, column 604470 in https://outlook.office365.com/owa/prem/15.0.913.9/scripts/boot.worldwide.1.mouse.js
0x800a138f - JavaScript runtime error: Unable to get property 'get_$1Qf' of undefined or null reference
Exception was thrown at line 2, column 604470 in https://outlook.office365.com/owa/prem/15.0.913.9/scripts/boot.worldwide.1.mouse.js
0x800a138f - JavaScript runtime error: Unable to get property 'get_$1Qf' of undefined or null reference
Exception was thrown at line 2, column 604470 in https://outlook.office365.com/owa/prem/15.0.913.9/scripts/boot.worldwide.1.mouse.js
0x800a138f - JavaScript runtime error: Unable to get property 'get_$1Qf' of undefined or null reference
Exception was thrown at line 2, column 604470 in https://outlook.office365.com/owa/prem/15.0.913.9/scripts/boot.worldwide.1.mouse.js
0x800a138f - JavaScript runtime error: Unable to get property 'get_$1Qf' of undefined or null reference
Exception was thrown at line 2, column 604470 in https://outlook.office365.com/owa/prem/15.0.913.9/scripts/boot.worldwide.1.mouse.js
0x800a138f - JavaScript runtime error: Unable to get property 'get_$1Qf' of undefined or null reference

Please post it here as this forum is meant only for Windows server general queries.
http://community.office365.com/en-us/f/156.aspx
http://www.arabitpro.com

Launching the Debug never complete

Similar Messages

Maybe you are looking for