Launchpad Displays Doubles & Triples

Launchpad displays doubles & triples of most applications. How do I fix this?

Launchpad will display an icon for each copy of an application that is currently installed (as well as any aliases to those applications), so you will see more than one icon for an application if you have more than one version of the application installed or aliased.
Prior to installing OS X Lion, if you moved installed applications into sub-folders inside of /Applications, OS X Lion installs the current versions of those applications in /Applications, and leaves the earlier versions of the applications that you moved.
Taken from:
http://support.apple.com/kb/HT4836
Regards,
Colin R.

Similar Messages

  • Condition types doubling/tripling/...when sales documents created with reference to other documents

    Hi,
    When I create a sales order with reference to a Quote, the pricing condition types are duplicating. Same is happening when subsequent documents like Billing, credit memo request and credit memo are created. Particularly, the condition types  are doubled/tripled/.... in the subsequent documents. Because of this, pricing net value is calculated wrong. For example, freight charges getting added twice. I searched the forum and found similar issue was discussed at Condition types - Doubling UP  raised by forum member Sridhar Vijjhalwar, however there is no solution added in it.
    Has any other member came across this issue and resolved?
    I have checked the access sequence and exclusive indicators are checked. Copy controls are also checked, looked good and I tested by adding copying type D/G. Checked OSS note also and found one OSS note 1459807 - Invoice has missing/incorrect conditions when created from a sales order.
    but it is not solving the problem either. Issue also elevated to SAP for their investigation. Our system is SAP ECC 6.0 - EHP6.
    Quote Pricing:
    Sales order Pricing:
    I appreciate any pointers to resolve the issue.
    Regards,

    what was the scenario, and how did you replicate?
    It is a configuration for a new project (France country), however we found that the same issue popping up for existing business processes also. As for replicating, we just tried the same procedures, the issue is found in subsequent documents.
    If you have observed one notable thing is - all the condition types which duplicated were Z Conditions, and the standard conditions were never duplicated at least in my case.
    In our case even standard condition types like MWST, SKTO, GRWR, VPRS also shows duplicating.
    if you can throw about the business process?
    As you have mentioned order created with reference to quote was only the straight forward scenario?
    I tested other scenario also, like creating a sales order, then delivery and then billing. In this case in billing document, the condition types are duplicating. If I create a credit memo request against the billing document, then it further duplicating.
    I am not sure what is causing this. I initially thought it may be copy control settings pertaining to the new project, however other business documents also has the same issue. Other business are using different document types.
    Thanks for your follow-up.
    Regards,

  • Preview Doesn't Display Double Spacing In Documents

    Is there a way to display double spacing in preview? It shows up when the document is viewed in Pages and Open Office.

    Hi, Guy Burns,
    What is the resolution of the images you try to enlarge?
    My guess:
    If the resolution of your images is lower then 2560 wide (your screen resolution), the window will open with the exact size and resolution of the picture (for instance 1920 wide). i.e. One pixel on your screen equals one pixel of your picture.You can indeed enlarge the window and zoom in, but then you are enlarging pixels, the image will get less sharp.
    The "Scale large images to fit window" function, is meant for "large images" as the name implies, so images with a larger resolution then your screen resolution. With this function, you can reduce the size of images that would otherwise not fit entirely on your screen, to the necessary size to view the whole picture as big as possible. So this function does not work if the "scale" is 100% or more.
    In slideshow mode however, there's a function to automatically adapt the size of smaller images to "full screen", and also "quicklook" (spacebar) supports full screen mode.

  • Fiori Launchpad displays a blank screen

    My Fiori Launchpad displays a blank screen when running the FioriLaunchpad URL
    https://******/sap/bc/ui5_ui5/ui2/ushell/shells/abap/FioriLaunchpad.html
    I installed Fiori and everything appears to be configured ok.  I then installed the backend components for Leave Requests (GBHCM002 and GBHCM003).  I created a new catalog and group in the launchpad designer and assigned them to my role.
    I activated the ICF services, and launchpad services via /iwfnd/maint_service.  Services are assigned to LOCAL system alias and browser calls are successful and I see no errors when testing via the gateway client.
    ZTRANSPORT
    ZQUICKVIEW
    ZPAGEBUILDER_SERVICE_V_0_1
    ZPAGE_BUILDER_PERS
    ZPAGE_BUILDER_CUST
    ZPAGE_BUILDER_CONF
    ZLAUNCHPAD
    ZINTEROP
    ZLEAVEREQUEST
    The following components are installed and I have a combined frontend and backend system running on SAP ECC 6.0 Ehp7.
    SAP_GWFND     740        0009       SAPK-74009INSAPGWFND
    SAP_UI 740        0011      SAPK-74011INSAPUI
    GBHCM002        600        0014       SAPK-60014INGBHCM002 HCM Employee Requests (Leave)
    GBHCM003        600        0012       SAPK-60012INGBHCM003 HCM Manager Approvals (Time, Training,
    UIX01EAP          100         0005       SAPK-10005INUIX01EAP    UI for ERP Central Applications
    UIX01HCM         100         0005       SAPK-10005INUIX01HCM  UI for HCM Application
    UIX01TRV          100         0004       SAPK-10004INUIX01TRV   UI for Travel Application
    I’ve checked ICM logs, ran the cache jobs and authorisations trace.  I’m not seeing any errors anywhere so finding it impossible to troubleshoot
    Please help!
    Thanks
    Amanda

    For Approve leave requests :
    Business Catalog (Launchpad)
    SAP_HCM_BC_MANAGER_X1
    Business Group (Launchpad)
    SAP_HCM_BCG_MANAGER_X1
    PFCG role for Business Catalog
    SAP_HCM_BCR_MANAGER_X1
    PFCG Role for Technical Catalog
    SAP_HCM_TCR_T_X1
    For Employee :
    Business Catalog (Launchpad)
    SAP_HCM_BC_EMPLOYEE_X1
    Business Group (Launchpad)
    SAP_HCM_BCG_EMPLOYEE_X1
    PFCG role for Business Catalog
    SAP_HCM_BCR_EMPLOYEE_X1

  • How to display double byte characters with system.out.print?

    Hi, I'm a newbie java programmer having trouble to utilize java locale with system io on dos console mode.
    Platform is winxp, jvm1.5,
    File structure is:
    C:\myProg <-root
    C:\myProg\test <-package
    C:\myProg\test\Run.java
    C:\myProg\test\MessageBundle.properties <- default properties
    C:\myProg\test\MessageBundle_zh_HK.properties <- localed properties (written in notepad and save as Unicode, window notepad contains BOM)
    inside MessageBundle.properties:
    test = Hello
    inside Message_zh_HK.properties:
    test = &#21890; //hello in big5 encoding
    run.java:
    package test;
    import java.util.*;
    public class Run{
      public static void main(String[] args){
        Locale locale = new Locale("zh","HK");
        ResourceBundle resource =
            ResourceBundle.getbundle("test.MessageBundle", locale);
        System.out.println(resource.getString("test"));
      }//main
    }//classwhen run this program, it'll kept diplay "hello" instead of the encoded character...
    then when i try run the native2ascii tool against MessageBundle_zh_HK.properties, it starts to display monster characters instead.
    Trying to figure out what I did wrong and how to display double byte characters on console.
    Thank you.
    p.s: while googling, some said dos can only can display ASCII. To demonstrate the dos console is capable of displaying double byte characters, i wrote another helloWorld in chinese using notepad with C# and compile using "csc hello.cs", sure enough, console.write in c# allowed me to display the character I was expecting. Since dos console can print double byte characters, I must be missing something important in this java program.

    after google a brunch, I learned that javac (hence java.exe) does not support BOM (byte order mark).
    I had to use a diff editor to save my text file as unicode without BOM in order for native2ascii to convert into a ascii file.
    Even the property file is in ascii format, I'm still having trouble to display those character in dos console. In fact, I just noticed I can use system.out.println to display double byte character if I embedded the character itself in java source file:
    public class Run {
         public static void main(String[] args) throws UnsupportedEncodingException{
              String msg = "&#20013;&#25991;";    //double byte character
                    try{
                    System.out.println(new String(msg.getBytes("UTF-8")) + " new string");  //this displays fine
                    catch(Exception e){}
                    Locale locale = new Locale("zh", "HK");
              ResourceBundle resource = ResourceBundle.getBundle("test.MessagesBundle", locale);
                    System.out.println(resource.getString("Hey"));      //this will display weird characterso it seems like to me that I must did something wrong in the process of creating properties file from unicode text file...

  • Content all of a sudden doubled/tripled!

    I haven't gone to sync my ipod touch in about 3 weeks and when I hooked it up to my computer, I got a warning from Itunes saying that on of my paid for TV shows I bought on Itunes was not authorized.  So I went to re-authorize it, and it keeps coming back saying my computer is already authorized.  Huh?  And then I noticed something very strange.  I started looking through my songs library, and noticed that all of a sudden a lot of my songs have been doubled, tripled, even quadrupled in Itunes.....I went to view the file in Windows explorer, and sure enough there are duplicates of the file.  I also noticed that the TV show I purchased is not showing up three times in Itunes!  What the heck has happened?  I can't recall doing anything that would have caused this.  I am running the newest version of Itunes and the ios 5.01 software. 

    A couple of links that might help:
    Troubleshooting authorization issues
    How to delete duplicated songs all at one time?
    tt2

  • HT4890 Why do doubles, triples, quadruples of pictures exists on the Photo Stream?

    Why do doubles, triples, quadruples of pictures exists on the Photo Stream?

    Hi there srchapman,
    I would recommend taking a look at the troubleshooting steps found in the article below.
    iCloud: My Photo Stream troubleshooting
    http://support.apple.com/kb/ts3989
    -Griff W.

  • Unable to display double values in Excel sheet using JExcel API

    Hi
    I am writing code to generate report in the form of Excel Sheet using JExcel API.
    Everything is going fine but whenever I want to put some double values in a cell it is only showing 2 decimal places. My problem is "I want to show upto five decimal places".
    Any kind of reply might help me lot.
    Thank U.

    If you enable the submit zero option, it still happens? This is a new feature on the display tabl
    #NumericZero Enhancements
    To display a numeric zero in place of an error message, you can enter #NumericZero in any of the three Replacement text fields. When you use the #NumericZero option:
    · Excel formatting for the cell is retained.
    · All calculations with dependency on the cell will compute correctly and will take the value of this cell as zero.
    · This numeric zero is for display only. When you submit, the zero value is NOT submitted back to the data source.
    You cannot set display strings for cells that contain an invalid member or dimension name (metadata error). Metadata errors produce standard descriptive error messages.
    Errors are prioritized in the following order from highest to lowest. The error message for a higher-priority error takes precedence over that for a lower-priority error.
    1. (Highest) Metadata errors
    2. #No access
    3. #Invalid/Meaningless
    4. #No data\Missing

  • Displaying Double 2.0E-4 as 0.0002

    Hi people,
    I know its a very basic question but could anyone of you please help me with this.
    I have a double value 0.0002 stored in the database and I want to display as it is in Java.
    But somehow this value is displayed as 2.0E-4 (scientific form)
    Could you please help me out????
    help will be highly appreciated
    Cheers

    java.text.DecimalFormat

  • Delivery quantity displaying double in BW report

    Hi All,
    One CUBE is getting data from two DSO's.
        1st DSO contains Sales deliveries data
        2nd DSO contains Sales Billing data.
    Mappings between CUBE and two DSO's
        Sales Deliveries DSO to CUBE : - Key fields are DELIVERY NUMBER, DELIVERY ITEM, BILLNING NUNMBER (Constant ZERO's), BILLING ITEM (Constant    ZERO)
        Sales Billing DSO to CUBE ; - DELIVERY NUMBER, DELIVERY ITEM, BILLNING NUNMBER, BILLING ITEM
    Data in CUBE:
    There is a one delivery number with two line item (10, 20), and delivery quantity is showing correct in delivery qty key figure
    and second row there is a billing document with same delvery number and with two line items (10, 20) and billing quantity is showing correct in billing qty key figure, but again delivery quantity is displaying in delivery qty key figure for this billing document number.
    Because of this reason delivery quantity is showing double in BW report.
    I want to display correct delivery quantity,
    How can I achieve this?
    Helpful answer will be appreciated with points.
    Thanks in advance,
    Venkat

    Hi Venkata
    You can restrict your Deliv Qty Key figure with Bill Num and Item Num both equal to zero.
    This will pick up Deliv Qty only from one record in cube and wont be duplicated.
    But in this I would have two cubes and build a MultiProvider on these two cubes. Map Deliv only from one cube,
    Regards
    Anindya
    Edited by: Anindya Bose on Nov 17, 2011 11:58 PM

  • Seeing double & triple entries in iTunes TV Store

    For some reason today, I'm seeing double and sometimes triple entries for episodes in the TV shows section of the iTunes store. For instance, on the show Damages, I see "1 Pilot" repeated three times and "2 Episode #0101" repeated twice. That's a total of five entries in the list but only represents two actual episodes.
    I'm seeing the same thing in virtually every other TV show I look at. Grey's Anatomy Season 1, for instance, is doubled with 18 entries for the 9 actual episodes... each one listed two at a time.
    Here is a screenshot:
    http://halfpress.com/images/itunes.jpg
    My wife checked from her iTunes and is not seeing this. I'm also NOT seeing it in Podcasts, Music, etc. Just the TV listings of the iTunes Store.
    Any ideas?
    Message was edited by: Erin Mahler

    Ok, this is ironic... half of what I wrote didn't appear in the above paste. So now I'll be making a double entry for this post. Not my day, apparently...
    I'm seeing the same thing in virtually every other TV show I look at. Grey's Anatomy Season 1, for instance, is doubled with 18 entries for the 9 actual episodes... each one listed two at a time.
    Here is a screenshot:
    http://halfpress.com/images/itunes.jpg
    My wife checked from her iTunes and is not seeing this. I'm also NOT seeing it in Podcasts, Music, etc. Just the TV listings of the iTunes Store.
    Any ideas?

  • Backup files all doubles& triples in Itunes how to remove

    Hi: my name is tony and just got new computer for christmas,I had BestBuy back up my music to a momery stick. I had windows XP I now have Windows &. When I installed my Music on new computer all songs are double and tripled and some ar 5 & 6 times the same song over and over HELP how do I get rid of all these songs with out doing this one at a time.I will be here for days I have 2,000 songs.A little help please.This is the first time on help site,I don't know if you need my EMAIL address but here it is. [email protected] Thanks Tony C

    Sorry to say, you're going to have to go through your files and see where the duplicates are.
    If you had duplicates on the memory stick, there will be duplicates in itunes.

  • Rounding and displaying doubles

    How do you stop a double (eg 12646903) being displayed as 1.2646903E7? ??? .
    Lynda

    If you are talking about rounding doubles, you should take a look at the BigDecimal class. For example if you where rounding currency and lets say you are trying to convert 1.0 at a rate of .787564 you would normally get
    1.26973807842918162841369082385685 but if you wanted to round this to 1.27 you could do the following ...
    double myAmount = 1.0;
    double myRateOfExchange = .787564;
    double myDouble = myAmount / myRateOfExchange;
    BigDecimal bd = new BigDecimal(myDouble).setScale(2,BigDecimal.ROUND_HALF_DOWN);You will need to import BigDecimal to use it. import java.math.BigDecimal;Depending on how you want to round you may want to look at the field index for the BigDecimal class.
    Hope this helps

  • Displaying double quote best practice

    If a user enters a double quote and it gets saved to the database then displaying it fails in the value="" of an input field.
    To fix this I can do a .replaceAll("\"", """) on the form... but it doesn't seem like a good solution to have to do that to every field that should allow a double quote. And while in my case the number of fields is small and setting this up in all the cases that it would be needed is feasible, it seems like it would be better to do this on the front end then to change something in java... somewhere I'm bound to end up with &quot saved to the database if I'm not careful.
    so is there a best practice for this? should I use an EL function inside my ${} to do the replace?
    Thanks

    I tried what you said, but it messed the page all up.
    The replace is inside an input field
    value="${fn:replace(name,'"','& quot;')}"it caused a bunch of errors. I probably would have had to do it inside a <set></set> tag and then referenced that value in the input field I guess.... But I convinced the boss that double quotes are not needed in the name or description. So I just added an onkeydown event to disable double quotes. Hope it doesn't come back and bite me.

  • How can Mapviewer display double-byte characters

    Hi,
    I am facing a problem using Mapviewer to display a map with a title containing double-byte characters e.g. chinese charaters. I think the problem takes place as map_Request producing the map image.
    My environment is :
    NT server 5.0(sp 3)
    Oracle 9.01
    J2EE
    IE 6.0

    are you using the mapclient.jsp demo file? there is a bug in that file that will lead to truncated map requests when the title is in chinese. it will be fixed in the next version of MapViewer (a beta version
    of which will be on OTN soon).
    Thanks,
    LJ

Maybe you are looking for