LaunchPad Iview for various Business Packages

Hi,
I have installed Business Package for Common Parts. In this I can see LaunchPad Iview. I then installed Business Package for Business Unit Analyst
I run the Analytics Iview which refers to LaunchPad Iview.
However it does not work. I refferred to the webdynpro application to which it was pointing.
This was webdynpro:java/sap.com/mss~lpa/com.sap.xss.fin.lpa.reportlaunchpad.ReportLaunchpadPcdApp/base
But I dont find this webdynpro application at all.
Do I have to install any particular component .
Thanks,
Harish

Hi Padmaja,
We are still encountering the same problem, and have logged a message with SAP.  We have implemented single sign-on and increased the maximum possible jco connections, but this does not appear to have fixed it.
Regards
John

Similar Messages

  • Configuration for sales business package

    Hi,
    Any one having documents for configuraing  Business Package for Sales. I need step by step document to do that.
    What are other BP can be helpful for MM, SD and PM process.
    Regards
    Stan

    Hello again,
    we dindn't move any further with that Business Package. What I see is, that the Launchpad iView is configured within the package with the following parameter:
    com_sap_webdynpro_mandatory_application_parameter:  class=CL_FPB_SNI_ACCESS&role=ISR&instance=REP&display_external=X
    <b>But:</b> In the end, the iView points to a Web Dynpro named <b>java/sap.com/mss~lpa/com.sap.xss.fin.lpa.reportlaunchpad.ReportLaunchpadPcdApp/base</b> which is not existing on the portal system.
    Do I need the Web Dynpro on portal or backend system? And, which packges do I have to install to get this Web Dynpro?
    Please help me...
    Kind regards,
    Matthias

  • CProjects iViews from the Business package "Projects"

    Hi all,
    We have been recommended to implement the cProjects iViews from the Business package "Projects". For this, we are asked to refer the note 602158. Can anyone guide me about how to proceed with this implementation?
    Regards,
    Vivek Pandey

    Hi Vivek,
               I think you need to use the package called cprxrpm for the cprojects installation.
    regards,
    rajesh

  • How to Initiate For Creating Business Package.

    Hi all,
    We donu2019t have NWDI setup in our landscape; therefore I would like to know that how i can initiate for creating business package of custom specific application development using Web Dynpro JAVA and DB Oracle. If anyone has idea about this type of in-house development, please suggest.

    Hi Gautam
    Please setup NWDI for creating custom business pachage.
    Download DTR, CBS and CMS same patch level as your Server and delpoy.
    then Create Software component in System Landscape Directory(SLD) and create custom business package track in the CMS for development using Web Dynpro JAVA
    Hope this will help.
    Thanks
    Arun

  • Source Code for Asset Business Package

    If anyone customized I would like to know how to get to the Java source code for Asset Business Package
    Regards
    Mike

    Try the SCSL release:http://www.sun.com/software/communitysource/j2se/java2/download.xml

  • Personal Information iViews missing in Business Package for E.S.S.

    Hi all,
    we have imported the business package for Employee Self-Service (ERP2005, Release 1.0 for nw2004s) in our portal. The iViews for the application 'Personal Information' (like 'Address', 'Bank Information',...) are language dependent and in the portal content all languages are visible -except Finland. According to the online documentation it should be there but it isn't.
    Does anyone know why it is missing??
    Thanks in advance
    Karsten

    Ajendla,
             The personal information Iview has Personal data, address, Familymemebers/dependents, and bank details serivces. So you have to configure the corresponding infotypes 0002, 0006, 0021, 0009 and their subtypes in the  IMG activity under "employee-selfservice. Sorry, I cannot give the exact path,coz I am not infront of the SAP system now. 
    Any way, hope this helps. If it does award points.
    Have a Merry christmas.

  • Creating transport package for CRM Business Package

    Hi there,
    I have recently installed the CRM Business Packages 60.2 onto our EP6.0 SP2 server.  I have also performed quite a lot of configuration on the portal e.g. creating new roles, worksets, iviews etc.
    We have now installed a new EP6 server which is running on EP6 SP12.  I now need to install the CRM Business Packages 60.2 along with my work again onto the new EP server.
    Anyway I have some questions below:
    1) I was wondering whether I could create various 'Transport Packages' using the Transport > Export functionality under the System Administration tab.  So if I create Transport packages which contains the CRM business packages, export these to the server, then on the new EP6 server import these.  Is this possible or is it advisable to install the CRM business package again.
    2) In addition to this say for example I could create transport packages for the CRM business package, can I also create transport packages for the new roles, iView etc I created and import these into the new EP server?
    3) If say I decided to install the CRM Business Package onto the new EP server, but then I imported my work from the old EP server (i.e. new roles/worksets etc) into the new EP server, would this work.  Reason I ask is because some worksets I used in my new role on the old EP server are delta links to the migrated content.  If I only import my work how does it know where the delta links are pointing to?
    I hope this makes sense.
    Cheers
    JoJo

    Hi JoJo,
    Can you please give me the link of latest version of CRM Business package for EP 6.
    Thanks,
    Padmanaban

  • Modification of ABAP Web DynPro iViews delivered via Business Packages

    Hello Everyone,
    If this has been answered before, I apologize.
    Is there any 'supported' way ( or 'unsupported' ) to modify the out of the box ABAP WebDynPro iViews which are delivered via some of the new Business Packages for ECC 6.0?
    For example, I want to hide some fields on the 'Create Order' iView delivered in the Business Package for Internal Sale Representative..
    Thanks

    These Business Packages are just iView definitions that point to normal Web Dynpro ABAP components/applications that reside on the backend ABAP system.  They can be enhnaced like any other WDA application. 
    http://help.sap.com/saphelp_nw70ehp1/helpdata/en/6b/edc21e5e1e4a33a492b8955afffac7/frameset.htm
    http://help.sap.com/saphelp_nw70ehp1/helpdata/en/47/b170d256293c5ce10000000a421937/frameset.htm
    http://help.sap.com/saphelp_nw70ehp1/helpdata/en/94/9cdc40132a8531e10000000a1550b0/frameset.htm
    http://help.sap.com/saphelp_nw70ehp1/helpdata/en/c5/f4b9422e0fb911e10000000a1550b0/frameset.htm
    http://help.sap.com/saphelp_nw70ehp1/helpdata/en/9f/95467bbefc4a808fffeba4c5177258/frameset.htm

  • What is best UI technology to use for custom business package

    Hi,
    I have a requirement to develop a custom Business Package for Treasury in Finance. With my past experience I am leaning towards Web Dynpro for Java.
    Client does not have any programming language consideration.
    Is there any body who has done something like this ? Can some expert suggest me if my choice of Web Dynpro might not be good and why?

    Hi,
    If you don't have complex business logics and lot of portal runtime interaction then webDynpro is the best choice considering the ease of development and look and feel.
    But your answer to the question is yes then you can think of java iView development along with webDynpro.
    Thanks,
    Abdul Raheem S

  • Empty iViews in PLM Business Packages (Enter Asset, Enter Project etc)

    Hi All,
    We are implementing SAP PLM Business Packages 50.3.1 in SAP EP 6.0 SP16 with a SAP 4.7 backend. 
    We have noticed that certain iViews do not seem to work correctly - they display no entry fields at all.  For instance, in the Assets Business Package, the Asset Details Page contains a Choose Asset iView in which you can choose either Functional Location or Equipment.  When choosing either of these, the Enter Asset iView should refresh and display the appropriate entry field.  ie. either 'Enter Functional Location' or 'Enter Equipment'.  Instead, it displays absolutely nothing (ie. the Enter Asset iView remains blank).  This problem also occurs for projects in the Projects business package.
    Has anybody seen and resolved this behaviour for the PLM business packages?
    Any useful thoughts or suggestions will be greatly appreciated and rewarded.
    Regards
    John Moy

    Hi All,
    Thanks for the responses.  Thanks to your input, I have solved the problem.  Basically, we are working on copied versions of the pages and iViews (ie. copied into our custom folder in PCD).  Our users do not have access to the original SAP iViews.
    I noticed (after reading the documentation page 116 which you referenced), that for our copy of the component loader, the parameter Java_IView_Directory was still pointing to the standard SAP location, which our users have no access to.  This explains why the iViews are blank.  When I amend this parameter to point to our custom location, everything works!
    Thanks again for your input.  Points awarded.
    Regards
    John Moy

  • System Configuration for CRM Business Package 4.0-60.2 in Portal

    Hi All,
    We have configured CRM Business Package(4.0-60.2) on EP6 SP11.
    Also created the SAP_CRM system with required fields.
    But I am confused with where do I have to specify the ISA related parameters?
    Should I create new systems with the aliases specified in CRM Business Package Admin guide(i.e.according to Web Entry Point names)For e.g. ISA_B2B,ISA_B2R,SHOP_ADMIN,USER_ADMIN etc. or I have to specify this in SAP_CRM system itself?
    Your Help will be appreciated.....
    Thanks and regards,
    Amol.

    Hello James,
    Thanks for the prompt reply...
    But my question is whether I have to make these changes in SAP_CRM system itself or should i create new system namely ISA_B2B,SHOP_ADMIN,ISA_B2R etc.
    With regards,
    Amol.
    Note : If you have already configured the CRM business package, please send me the documentation or the screen-shots of the system defined in portal on my e-mail id([email protected])

  • MDM iView problem from Business Package in Portals SR1

    Hi,
    I installed MDM Business Package 3.0 in Enterprise Portals 6.0 SR1. When i execute the iView in Portals, its asking me to download the security file. When i change the iView property from WebGUi to WinGui, its working properly.
    Did anyone faced the same problem.
    Thanks
    VIjay

    Hi VIjay,
    please turn off the Accessibility option in your portal personalization options (upper right corner, Personalize -> User Profile -> Activate Accessibility Features:
    (Screen reader required) -> turn it off.
    Does it work now as expected ?
    regards.
    Laszlo.

  • Instructions for installing Business Package for SAP CRM 7.0

    We hae CRM 7.0 and we have a Netweaver 7.0 (2004s) portal.  Can someone please either point me to the documentation or explain to me how to install the Business Package for SAP CRM on the portal?
    Thanks
    Angie

    need to go to service marketplace and go to Support Packages and Patches/My Companys Applciation Components/SAP CRM/SAP CRM 7.0/Entry by Component/CRM Portal Content and the business packages are there.

  • Question about Copying an MSS iViews from Migrated Business Package

    I have copied the iViews from the MSS migrated content and placed in my own folder.  I then changed some of the properties on the copied iViews.  I assigned my copies to a role.  The problem is that the iViews, when ran in the portal, are still using the properties on the original iViews which I copied instead.  What have I missed?  Is there some settings I need to change after copying an iView?

    I recopied the iViews and they seemed to work correctly after that.  Portal iView copying is a bit buggy.

  • Problem with Search Attributes iView in MDM Business package

    Hello Everybody,
    I am configuring MDM Search Attributes iView in Portal.
    This iView should show data based on selected record in Search Hierarchy iView. But it is not showing any attribute data on Search Attributes iView.
    Any idea what could be the problem.
    I have MDM 5.5. SP01
    Appreciate your help.
    Thanks,
    Bhavik Devisha

    Hi,
    I tried the scenario on MDM 5.5 SP06 and its working fine.
    Following are the steps:
    1. Create the MDM System.
    2. Create the Search Hierarchy iView
    3. Create the Search Attributes iView
    4. Create the page and place both the iViews into that page.
    Now when i am changing the hierarchy,its corresponding attributes appear in the Search Attributes iView as expected.
    Try the same on some different version.Then only we can conclude that it might be because of version.
    Regards,
    Jitesh Talreja

Maybe you are looking for

  • Rep-0756 problem facing while opening the report in 10g

    Hi, I am facing problem while opening RDF in oracle 10g. I follow the next steps. 1. Open the RDF in 10g. 2. Open the PLL in report builder and compile that PLL and save in same path where report located. 3. reattach the library with RDF. 4. Close th

  • A SOA Exception returned from Oracle EBS ISG

    Hi All, Need your help. Maybe someone know the solution for this error. Background Using a webservice client to call WSDL service which is published in Oracle EBS Integrated SOA Gateway. After invoking, encounter a error. Error <env:Envelope xmlns:en

  • How to append Target File(reciever side) .

    Hi PI Gurus, I have a scenario where i need to append the target file. It goes like this: files(idoc's) keep coming from the source at any time of the day. target file is sent only once in a day. The target file is appended each time a new source fil

  • Suspect hacking

    I am posting on behalf of a friend who thinks that her BT home hub has been hacked.  She has had suspicions for a while as a nosey neighbour always seems to know far more about her activities than he or she should do.  The person under suspicion live

  • VOD error code 271-anyone had this problem???????

    I recently got an HD set upbox so I could watch  HD on demand movies, which 99% of the movies are now. I installed it and then got this error message.....VOD 271. VOD temporarily onavailable, Please try again later.  I have been on the phone with ver