Launchpad keeps emptying folders and won't keep organized. Mavericks. What's up?

Launchpad keeps emptying folders and won't keep organized. Mavericks. What's up?

It sounds as though it needs a service call.
You could try booting in safe mode (hold the shift key down and boot) - but it probably won't get that far.

Similar Messages

  • My Magic mouse keeps grabbing items and won't let go.  What do I do?

    When I click on an item with the Magic Mouse, it grabs and holds on to that item.  I cannot figure out how to make it let go.  I have tried restarting the mouse and also restarting my mac.  Nothing is working.  Any ideas?  It was all working fine up until about an hour ago.  Thanks!

    This has happened to several people in the last several weeks with iBooks.  Reboot your iPad.  Hold the power and home buttons for at least 10 seconds (keep holding past the swipe to shut down bar if it appears) until the Apple Logo appears, then let go of both buttons and your iPad will reset.  When it comes back up, I'm betting iBooks will be there..........

  • My Time Machine keeps backing up and won't stop.

    My Time Machine keeps backing up and won't stop.  The problem started when it said I was out if space.  It is supposed to delete the oldest backup.  Now I cannot even backup at all.  It just keep going and never stops, although it really does not work at all.  I have used the disk utilities and iI have Zeroed out. The TC is a 1 TB and is about 13 months old. Right now it says "79.9 MB of 104.9 MB" and "backing up 961,837 items". I do not have the check mark in "Notify after old backups are deleted." It will stay stuck like this for hours and hours.  The TC is plugged into a U-verse router and the 27" MAC is plugged into the TC.

    So you already wiped the old backup and started again??
    If that is the case it did a fresh full backup ok?
    How much free space is on the TC now?
    Do you happen to have multiple network links? Meaning do you have TC bridged to the U-verse router.. with both ethernet and wireless working at the same time. I discovered this one all by my loansome.. having multiple paths does not seem to worry most things on the computer.. but it totally kills TM.
    I had the same sort of thing happening in testing a TC I am fixing. So I have multiple ethernet and wireless. The incremental backups became extremely slow.. by turning off wireless and one ethernet so there is only one route to the TC.. it flys again.

  • My Itunes logon keeps popping up and won't respond to my password

    My Itunes logon keeps popping up and won't respond to my password, everytime I try and log in or cancel

    So you already wiped the old backup and started again??
    If that is the case it did a fresh full backup ok?
    How much free space is on the TC now?
    Do you happen to have multiple network links? Meaning do you have TC bridged to the U-verse router.. with both ethernet and wireless working at the same time. I discovered this one all by my loansome.. having multiple paths does not seem to worry most things on the computer.. but it totally kills TM.
    I had the same sort of thing happening in testing a TC I am fixing. So I have multiple ethernet and wireless. The incremental backups became extremely slow.. by turning off wireless and one ethernet so there is only one route to the TC.. it flys again.

  • My spot healing tool gets stuck and freezes and won't keep up with the curser. I'm using LR4.

    My spot healing tool gets stuck and freezes and won't keep up with the curser. I'm using LR4.

    Remove the song in question from the sync list and see if the rectifies the problem.
    If it does, then iTunes believes the song no longer exists on your drive and that will need to be corrected.

  • My iPhoto keeps quitting unexpectedly and won't open. I don't know what to do. Please help!

    My iPhoto keeps quitting unexpectedly and won't open. I don't know what to do. Please help!

    Do you get a crash report?  If so post just the first 50 lines of it.
    OT

  • My iPhone 4 keeps shutting down and won't switch back on unless I plug it into charger. It's then coming hop iOS 6 and connect to iTunes?

    My iPhone 4 keeps shutting down and won't switch back on unless I plug it into charger. It's then coming hop iOS 6 and connect to iTunes?

    Yes I've connected it to iTunes.. Reset the phone completely and synced phone again. It's also turned off twice today and when it comes back on its saying searching in the top left corner were your signal and network carrier should be?

  • ICloud keeps popping up and won't accept my AppleID password

    iCloud keeps popping up and won't accept my AppleID password

    Go to System Preferences>iCloud, click Sign Out, choose Delete at all of the prompts, restart your Mac then go back and sign back in.  Note: this only removes the iCloud data from your Mac but not from iCloud.  Your data will reappare on your Mac when you sign back in, after a brief delay as it redownloads.

  • I have the new iOS 6.1.2 on my iPad.  My wifi connects to my home network but keeps dropping it and won't reconnect.  Did not have this problem with previous iOS.

    I have the new iOS 6.1.2 on my iPad.  My wifi connects to my home network but keeps dropping it and won't reconnect.  Did not have this problem with previous iOS.  Apple, you have a quality assurance issue.  Don't be like Microsoft where they send out pieces of junk with testing it.

    Try the following to rule out a software problem:                 
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Power off and then back on the router
    - Reset network settings: Settings>General>Reset>Reset Network Settings
    - iOS: Troubleshooting Wi-Fi networks and connections
    - iOS: Recommended settings for Wi-Fi routers and access points
    - Restore from backup. See:
    iOS: How to back up
    - Restore to factory settings/new iOS device.
    If still problem make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar

  • Brand new/never been used iPod nano 2nd gen keeps on charging and won't turn on when removed connection to pc/charger. how can i fix this? pls i need help

    brand new/never been used iPod nano 2nd gen keeps on charging and won't turn on when removed connection to pc/charger. how can i fix this? pls i need help
    i did that middle button and top button for 6-10 seconds, hold play button, that hold button and got it right back and still it won't on but it is detected on my pc and itunes. i've already even put on some songs but it keeps on charging and charging for how many hours and if i remove it, it shuts off and won't turn on again.

    brand new/never been used iPod nano
    Call Apple Care.   You are still under warranty.  You also have 14 days from the date of purchase to return your iPod with no questions asked. 
    Take FULL advantage of your warranty.  Posting on a message board should be done as a last resort and if you are out of warranty or Apple Care has expired. 

  • 'keep me signed in' won't keep me signed in to safari browser.

    'keep me singned in' won't keep me signed in to safari browser.

    We have had this problem forever, along with the ever changing MyVerizon Home Page. We can tell when our login is going to fail based upon what user name it greets on the top right-hand side of the page. I continue to post how many logins we can have per day and VZ employees continue to spew the company lie that this is for our protection. The VZ line is that the logouts are to prevent someone else from accessing your account and changing settings. Now we all know how often family members get in and purposely change settings. Perhaps VZ should employ some engineers and programmers who can fix the problem that VZ claims isn't a problem.

  • When i redeem my code it keeps saying error and that its not properly activated what do i do?

    when i redeem my code it keeps saying error and that its not properly activated what do i do?

    Ask the people at the store the gift card came from or the iTunes Store staff for assistance.
    (107049)

  • My MacBook Pro is crashing and Mac OS stops working sometimes so I have to restart it. And sometimes it stays on the first white-ish screen with the Apple and won't start further. What to do?

    my MacBook Pro is crashing and Mac OS stops working sometimes so I have to restart it. And sometimes it stays on the first white-ish screen with the Apple and won't start further.
    What to do?
    Does that mean that the is the end of my Mac Book 5bought in the summer of 2009) ? Or is there someting to do to fix it?
    Thanks
    V

    Try this:
    How to Perform an Archive and Install
    An Archive and Install will NOT erase your hard drive, but you must have sufficient free space for a second OS X installation which could be from 3-9 GBs depending upon the version of OS X and selected installation options. The free space requirement is over and above normal free space requirements which should be at least 6-10 GBs. Read all the linked references carefully before proceeding.
    1. Be sure to use Disk Utility first to repair the disk before performing the Archive and Install.
    Repairing the Hard Drive and Permissions
    Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger, Leopard or Snow Leopard.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer. Now restart normally.
    If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
    2. Do not proceed with an Archive and Install if DU reports errors it cannot fix. In that case use Disk Warrior and/or TechTool Pro to repair the hard drive. If neither can repair the drive, then you will have to erase the drive and reinstall from scratch.
    3. Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When you reach the screen to select a destination drive click once on the destination drive then click on the Option button. Select the Archive and Install option. You have an option to preserve users and network preferences. Only select this option if you are sure you have no corrupted files in your user accounts. Otherwise leave this option unchecked. Click on the OK button and continue with the OS X Installation.
    4. Upon completion of the Archive and Install you will have a Previous System Folder in the root directory. You should retain the PSF until you are sure you do not need to manually transfer any items from the PSF to your newly installed system.
    5. After moving any items you want to keep from the PSF you should delete it. You can back it up if you prefer, but you must delete it from the hard drive.
    6. You can now download a Combo Updater directly from Apple's download site to update your new system to the desired version as well as install any security or other updates. You can also do this using Software Update.

  • My Ipod nano 7th generation turned off and won't turn back on. what should I do?

    my Ipod nano 7th generation turned off and won't turn back on. what should I do?

    If you have done the reset and nothing appears and you are sure it still has a charge and it doesn't turn on, you may request for a replacement if it still covered by the warranty. Cheers!

  • HT4993 My iPhone 5 turned off and won't turn back on. what should i do about this?

    My iPhone 5 turned off and won't turn back on. what should i do about this?

    Hi SeanCam,
    Welcome to the Support Communities!
    The following article will provide some troubleshooting steps for this issue:
    iPhone, iPad or iPod touch: Not responding or does not turn on
    http://support.apple.com/kb/TS3281?viewlocale=en_US
    Cheers!
    - Judy

Maybe you are looking for

  • Weird custom menu behavior in 8.2

    I'm in charge of upgrading a large project from LV 7.1 to 8.2 and I ran into several problems but was able to resolve them except 2 major ones (not including the crashing tables and indices in self-indexing while loops). 1) Our custom menu now seems

  • Maximize on second monitor

    I wanted to maximize Safari on an external projector but I couldn't maximize on the second screen. So, I have the same problem with OSX Mail, Sparrow, etc. I've looked in teh options but couldn't find how to do that, anybody knows? Thanks in advance!

  • Universal view settings on one computer

    Hi! I'm using Adobe Acrobat Pro v. 9.3.2. I'm wondering if there is any way to apply the same view settings for all PDF-files I open? The problem is that I can open one document and read it for instance with single page continous settings. The next P

  • JMS with web service ,project ?

    I would like to come up with a masters project on JMS and Web Service. I need to convince my lecturer whether this thesis in JMS is competative enough with latest technology.I need some advice and explaination about JMS and popular thesis topic that

  • Webforms10g: initialize of mouse control?

    Hello, It happens sometimes in a multi record block that the cursor stays on the item of the current record and does not move to another record with a mouse click. Is there any command to initialize the mouse control? Maybe: synchronize?