Launchpad loading slow and weird.

This afternoon, I left my computer on but came home to find it off. It took a few tries to turn the computer back on. When it came back on, the launchpad was loading very slowly and strange. It cleared the icons then flashed the icons a few times. When I tried to scroll through the pages of the launchpad, it did the same thing. It flashed with several lines through the screen. Similarly, when I scroll down the page on safari, there is a clear line through one part of the screen where the text seems to be slightly distorted. Any suggestions would be much appreciated.

First place to start is to repair the disk permissions in Disk Utilities (Applications - Utilities - Disk Utility), do this 2-3 x and then restart the computer in Safe Mode and then restart normally and test.

Similar Messages

  • I WEB loads slow and grey

    My iweb site which is hosted by .mac loads slow and grey on pc's. The grey goes away when loaded but I would rather not have that.
    Any suggestions?

    You are thinking along the right track. The problem is the PNGs so try to eliminate the PNGs. Where do the PNGs come from? Well, it turns out that iWeb converts your JPG images into PNGs if you let iWeb do ANYTHING at all to the image. This includes resizing, rotating, framing, opacity changes, drop shadows, reflections...anything.
    So what do you think the secret to minimizing PNGs is then??? Right....don't let iWeb do any of these image manipulations. Resize your images outside of iWeb if you can. Apply the effects that you like to your images before bringing them into iWeb. Etc, etc, etc...
    I know it seems like this is what you'd expect iWeb to do for you, but unfortunately a side effect of letting iWeb take care of these things is PNG conversion.
    Even after doing all that you can do, iWeb still has templated items that only exist as PNGs...so you will not be able to completely get rid of PNGs, but you can for a lot of things. That will help your site load faster in general and without those ugly grey boxes where YOUR images should be.

  • Blog page loads slow and scrolls wierd on windows operating systems

    I have 2 sites in my iweb with 2 different domains, I started a blog page as a new site and pulished it but when I go to a PC to read it loads really slow and when you scroll down it takes forever even after explorer shows the site as done loading. I tried a couple different PC's from different places and I get the same result. My other page , the 1st site I created, loads just fine and you can scroll through it just fine. what I am doing wrong on the second site?

    Blog pages tend to have a lot of content and this can prove too much for poor old IE. Either reduce your content or optimize your files before uploading.
    See....
    http://www.tonbrand.nl/

  • ITunes 8 - Loads Slow and Beach Balls

    Ever since I started using iTunes 8 it loads real slow and beach balls as I go through my cover art. Anyone else have this issue?? I never had this problem with any other iTunes versions before.
    Sidenote: The Genius is turn off.
    Thanks.

    Hi J|Spoon,
    Try deleting the iTunes preference file. Quit iTunes. Locate this file: com.apple.iTunes.plist
    It's here: /Users/YourName/Library/Preferences. Open the Preferences folder, locate that file and drag it to your Desktop. Relaunch iTunes and see if you can access your cover art without iTunes freezing up. If that is the case, then drag that .plist file to the Trash, empty the Trash and reboot. Preference files can become corrupted over time. Your Mac will create a new pref file for you.
    Carolyn

  • Wireless Keyboard slow and weird

    I loved my Mac when I got it but lately the keyboard is very slow to display on the ssscreen and types strange by putting double letters and spacees. I have just bought a new keyboardd because I thought the oooldd one may have got damaged by the kids buttt the problem iiiis still there (as you can see). I ammmmm devastated as it has totally ruiiined the use of my lovellllly immaaaaaac. Can anyone help me?

    Testing testing, I have just put the new batteries in it that came with the new keyboard and the display is still fairly slow and the characters are doubling as much. It is a pain as I can only type very slowly for the keyboard to work and I am a fast typist. It is very frustrating, I spend more time using the backspace than anything else!!! There is a slight improvement but not much.

  • IWeb Site's Load Slow and Jump/Lock Up IE - Why?

    Week 3 of trying to figure out why/how to get pages I created on iWeb to load like they do on Safari/FireFox. IE browsers either lock on loading my pages and/or are jumpy when you scroll the page.
    Things I have done:
    Changed templates,
    Reduced the amount of graphics on the pages,
    Ran Maestro (which tells me it only makes the site 29% faster)
    Published to FTP server an not Mobile Me
    Site originally created in '08 - upgraded to '09
    published to server @ redmoonstudios.com
    Here is what I started with: http://www.only2degrees.com/kktmp/Only2Degrees/Home.html
    Here is what I changed to: http://only2degrees.com/Only2Degrees/Home.html
    And pages on IE are still Jumpy! but do load faster than before...
    ANY Suggestions, comments, help, critic I will glady take Anything really!
    I am at my wit's end with this!
    thank you!
    Kerilyn
    p.s. - whoever comes up with the solution that fixes this problem for me, I will happily reward with an iTunes Gift Card !!

    You say that optimizing only makes it go 29% faster. That's the difference between actually loading in IE rather than locking it up.
    That cool browser background is going to slow things down a lot.
    The problem with iWeb is that you can make really snazzy sites but IE can't handle them.
    You really have to dumb things down - everything plain - no whistles or bells.
    I've found the solution with my latest site. Its for musicians who want to build a site with iWeb so everyone will be looking at it on a Mac.
    A couple of years back I read that the average surfer would wait for up to 7 seconds for a page to download. I tried to build a few that would do that in IE. I ended up with a plain white page, an image, a couple of icons and some text and optimized it with WSM and it just made it in time!
    The main thing is to make your landing page as simple as possible. If you can get that to download fast and hook people in, you have a better chance of keeping them there even if the rest of the pages are a bit slower.
    It looks like you're using the default iWeb page width. I would increase this to the "standard" 980 px and dump the browser background at least for your Home page. Use it on the pages that are mainly text.
    The 980 px width fits a 15 inch screen which, believe it or not, a lot of people use and also translates well for iPhones - if you care.

  • Classloader caching in signed applet is very slow and weird

    I have a signed applet running in the 1.4.1_01 plugin environment, and
    I'm getting the following kinds of messages when I use debug mode 5 in the console:
    Connecting http:[myserver]/someclass.class with no proxy
    Connecting http:[myserver]/someclass.class with cookie "JSESSIONID=..."
    Sometimes, the classloader will say:
    WARNING: Unable to cache someclass.class
    Moreover, some classes will be repeated two or three times, as if the classloader is trying to get the same class two or three times.
    Some of these classes are even in the java.lang package!!
    The thing is, I'm actually trying to get the applet to use webservices, so I've signed the Apache Axis jar files (about 8 or so) and included them in the "cache_archive" parameter. The classes giving problems are from these archives, not from my main applet jar.
    The applet will eventually work, but the first time takes a LONG time to initialize because the classloader is trying to verify all the classes (i think). Subsequent runnings of the applet within the same browser will be much faster, but the same thing will happen if I start a new browser instance.
    My questions are:
    1) Why is the classloader trying to load from my http server rather than from the local jars? (they seem to be statically cached, I checked the plugin control panel)
    2) Why is the classloader reloading the same classes multiple times?
    3) Is the classloader verifying the signatures for each class, because it's taking a long time due to very many classes (100's).
    I can't seem to find ANY documentation for this at Sun or Google.
    Please help if you can!
    Andrew

    I've got the same problem with applet using SOAP based on jwsdp.
    But classloader only try to get classes from server that are used in SOAP calls.
    The only workaround I found is to move this classes to root package, but still there are problems with
    Connecting http://<host>/int.class with no proxy
    Connecting http://<host>/int.class with no proxy
    WARNING: Unable to cache http://<host>/int.class
    requests.
    Maybe this is a bug of Sun SOAP implementation?

  • Blog Loads Slow  and Intermittent Internet Connection for One Site Only

    Hi
    Yesterday we had a site where the blog lost it's feed, but was restore after a chat with support. Today the blog post are not coming up in the admin. I can see the list, but the not the post as the flywheel keeps spinning and spinning.
    When I go online, I can get to the blog fine, but when I click on the pagination links below or try to do a reload, the entire page gets lost or server can not be found.
    I have re-uploaded all the Layouts and Templates, but with no change.
    Anyone else having this issue, or is there something wrong with this site's blog?
    All other pages and features are accessible from the browser and admin, just not the blog.
    Thanks, Teejay

    Hi Teejay,
    If still experiencing troubles with your blogs please provide the following details so we can attempt to replicate on our end.. 
    - blog name or url
    - steps you are taking (where you are noticing the slowness)
    Or if you would rather you could also provide a quick video cast or your experience so we can investigate further.
    - http://www.techsmith.com/jing.html
    Kind regards,
    -Sidney

  • Bookmarks are loading slow, and it takes 2-3 times to save a bookmark to the toolbar.

    I just switched to a new laptop running Windows 7. I am on Firefox 3.6.6. I brought over my bookmarks from my XP machine and everything came over except for the toolbar. However now when I try to save a bookmark to the toolbar it takes me 2-3 times before it will actually save it. And accessing the toolbar is very slow.

    Actually now I can't even get to the bookmarks.
    I get the following error
    A script on this page may be busy, or it may have stopped responding. You can stop the script now, or you can continue to see if the script will complete.
    Script: chrome://browser/content/places/menu.xml:586

  • Email loading slow and draining battery

    Recently it takes forever to fetch email in my gmail mailbox.    The wheel spins for 3-5 minutes before email download.   I upgraded software a couple weeks ago.   Is that the culprit?

    Did you reset your device after the software update? Try to delete the mail account and set it up again if a reset does not work. There have been reports that, if push/fetch was used, mail tried to log onto your mail account over and over again, causing a battery drain this way.

  • Safari Loading Slow... can't open certian sites

    Hi as usual I go here to get the best advice that has gotten me going again.... Can not open certain pages on Safari one of them for example www.segib.org, not able to do it with Camino either. Furthermore Safari seems slow and weird on tabbed browsing, if anybody is able to open the above link let me know...
    Thanks
    Jorge

    JC --
    It won't open for me either, so I think it's the
    site's problem.
    Any others you want to try out here?
    GREAT thanks opens OK on windows... but not on MAC so will have to send a note to the site...so far that was one of the ones I need to cehck on a regular basis for work... as more develop will add them... some of the other ones have problems with graphics and so on... for example some airline sites... can not remember the ones that were weird... www.aircanada.com yes remeber this one having problems

  • I have fast internet, but this computer's move slow and stop internet

    ok i just bought this computer when i go on line  to yahoo web site or any web site , but go to mail loads slow and if I try to go to facebook lad slow and then it will let me  move page down a little and stop for a few second move alittle again and so on

    I would suggest you consult Taskmanager by  press ctr+alt+delete, then the performance tab.  This monitor will reflect used RAM and process load.  Then verify your internet speed with SpeakEasy.

  • FireFox is getting slower and slower

    I have been using fireFox for several years. i have a new Dell running Win 7 64bit. My ISP is Hughesnet satillite w/ downoad at 1Mbps. I have the latest update.
    The last few days pages have been loading slower and slower. As a matter of fact I'm forced to use IE9 to contact you.
    IE9 and Chrome load pages at the expected speed

    Hello,
    Certain Firefox problems can be solved by performing a ''Clean reinstall''. This means you remove Firefox program files and then reinstall Firefox. Please follow these steps:
    '''Note:''' You might want to print these steps or view them in another browser.
    #Download the latest Desktop version of Firefox from http://www.mozilla.org and save the setup file to your computer.
    #After the download finishes, close all Firefox windows (click Exit from the Firefox or File menu).
    #Delete the Firefox installation folder, which is located in one of these locations, by default:
    #*'''Windows:'''
    #**C:\Program Files\Mozilla Firefox
    #**C:\Program Files (x86)\Mozilla Firefox
    #*'''Mac:''' Delete Firefox from the Applications folder.
    #*'''Linux:''' If you installed Firefox with the distro-based package manager, you should use the same way to uninstall it - see [[Installing Firefox on Linux]]. If you downloaded and installed the binary package from the [http://www.mozilla.org/firefox#desktop Firefox download page], simply remove the folder ''firefox'' in your home directory.
    #Now, go ahead and reinstall Firefox:
    ##Double-click the downloaded installation file and go through the steps of the installation wizard.
    ##Once the wizard is finished, choose to directly open Firefox after clicking the Finish button.
    More information about reinstalling Firefox can be found [https://support.mozilla.org/en-US/kb/troubleshoot-and-diagnose-firefox-problems?esab=a&s=troubleshooting&r=3&as=s#w_5-reinstall-firefox here].
    <b>WARNING:</b> Do not run Firefox's uninstaller or use a third party remover as part of this process, because that could permanently delete your Firefox data, including but not limited to, extensions, cache, cookies, bookmarks, personal settings and saved passwords. <u>These cannot be recovered unless they have been backed up to an external device!</u>
    Please report back to see if this helped you!
    Thank you.

  • Recently started running slow and freezing up while loading web pages etc.

    Problem description:
    Computer running slow and freezes up for a few minutes from time to time, I have owned it since 2011 with no issues until now.
    EtreCheck version: 2.1.2 (105)
    Report generated December 15, 2014 at 9:58:50 AM MST
    Hardware Information: ℹ️
      MacBook Pro (13-inch, Early 2011) (Verified)
      MacBook Pro - model: MacBookPro8,1
      1 2.3 GHz Intel Core i5 CPU: 2-core
      4 GB RAM Upgradeable
      BANK 0/DIMM0
      2 GB DDR3 1333 MHz ok
      BANK 1/DIMM0
      2 GB DDR3 1333 MHz ok
      Bluetooth: Old - Handoff/Airdrop2 not supported
      Wireless:  en1: 802.11 a/b/g/n
    Video Information: ℹ️
      Intel HD Graphics 3000 - VRAM: 384 MB
      Color LCD 1280 x 800
    System Software: ℹ️
      OS X 10.10.1 (14B25) - Uptime: 0:10:42
    Disk Information: ℹ️
      Hitachi HTS545032B9A302 disk0 : (320.07 GB)
      S.M.A.R.T. Status: Verified
      EFI (disk0s1) <not mounted> : 210 MB
      Recovery HD (disk0s3) <not mounted>  [Recovery]: 650 MB
      Macintosh HD (disk1) / : 318.84 GB (24.01 GB free)
      Core Storage: disk0s2 319.21 GB Online
      MATSHITADVD-R   UJ-8A8 
    USB Information: ℹ️
      Apple Inc. FaceTime HD Camera (Built-in)
      Apple Inc. Apple Internal Keyboard / Trackpad
      Apple Inc. BRCM2070 Hub
      Apple Inc. Bluetooth USB Host Controller
      Apple Computer, Inc. IR Receiver
    Thunderbolt Information: ℹ️
      Apple Inc. thunderbolt_bus
    Configuration files: ℹ️
      /etc/launchd.conf - Exists
    Gatekeeper: ℹ️
      Mac App Store and identified developers
    Adware: ℹ️
      Geneio [Remove]
    Kernel Extensions: ℹ️
      /System/Library/Extensions
      [not loaded] com.mice.driver.PS3Controller (1.0.0d1) [Support]
    Launch Agents: ℹ️
      [running] com.amazon.sendtokindle.launcher.plist [Support]
      [running] com.robohippo.HippoConnectAgent.plist [Support]
    Launch Daemons: ℹ️
      [loaded] com.adobe.fpsaud.plist [Support]
      [loaded] com.microsoft.office.licensing.helper.plist [Support]
      [not loaded] com.robohippo.HippoConnectDaemon.plist [Support]
    User Launch Agents: ℹ️
      [loaded] com.genieo.completer.download.plist Adware! [Remove]
      [loaded] com.genieo.completer.update.plist Adware! [Remove]
      [loaded] com.google.keystone.agent.plist [Support]
      [invalid?] com.nds.pcshow.plist [Support]
      [invalid?] com.nds.pcshow.uninstall.plist [Support]
    User Login Items: ℹ️
      iTunesHelper UNKNOWNHidden (missing value)
    Internet Plug-ins: ℹ️
      FlashPlayer-10.6: Version: 16.0.0.235 - SDK 10.6 [Support]
      Default Browser: Version: 600 - SDK 10.10
      AdobePDFViewerNPAPI: Version: 11.0.09 - SDK 10.6 [Support]
      AdobePDFViewer: Version: 11.0.09 - SDK 10.6 [Support]
      Flash Player: Version: 16.0.0.235 - SDK 10.6 [Support]
      QuickTime Plugin: Version: 7.7.3
      SharePointBrowserPlugin: Version: 14.4.6 - SDK 10.6 [Support]
      Google Earth Web Plug-in: Version: 7.1 [Support]
      Silverlight: Version: 5.1.30514.0 - SDK 10.6 [Support]
      iPhotoPhotocast: Version: 7.0 - SDK 10.7
    Safari Extensions: ℹ️
      Omnibar Adware! [Remove]
    3rd Party Preference Panes: ℹ️
      Flash Player  [Support]
    Time Machine: ℹ️
      Time Machine not configured!
    Top Processes by CPU: ℹ️
          17% mds
          6% WindowServer
          0% AppleSpell
          0% fontd
          0% mds_stores
    Top Processes by Memory: ℹ️
      120 MB Safari
      77 MB mds_stores
      69 MB com.apple.WebKit.WebContent
      60 MB ocspd
      60 MB WindowServer
    Virtual Memory Information: ℹ️
      1.24 GB Free RAM
      1.15 GB Active RAM
      853 MB Inactive RAM
      1.05 GB Wired RAM
      1.00 GB Page-ins
      25 KB Page-outs
    Diagnostics Information: ℹ️
      Dec 15, 2014, 09:48:45 AM Self test - passed

    1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
    Don't be put off by the complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
    2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
    There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
    3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can act on it yourself without disclosing the contents to me or anyone else.
    You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
    In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.
    You may not be able to understand the script yourself. But variations of the script have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message.
    Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
    4. Here's a summary of what you need to do, if you choose to proceed:
    ☞ Copy a line of text in this window to the Clipboard.
    ☞ Paste into the window of another application.
    ☞ Wait for the test to run. It usually takes a few minutes.
    ☞ Paste the results, which will have been copied automatically, back into a reply on this page.
    The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
    5. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
    6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
    7. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
    Triple-click anywhere in the line of text below on this page to select it:
    PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts SerialATA 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports ' com.clark.\* \*dropbox \*genieo\* \*GoogleDr\* \*k.AutoCAD\* \*k.Maya\* vidinst\* ' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 "` route -n get default|awk '/e:/{print $2}' `" 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB ' com.adobe.AAM.Updater-1.0 com.adobe.AAM.Updater-1.0 com.adobe.AdobeCreativeCloud com.adobe.CS4ServiceManager com.adobe.CS5ServiceManager com.adobe.fpsaud com.adobe.SwitchBoard com.adobe.SwitchBoard com.apple.aelwriter com.apple.AirPortBaseStationAgent com.apple.FolderActions.enabled com.apple.installer.osmessagetracing com.apple.mrt.uiagent com.apple.ReportCrash.Self com.apple.rpmuxd com.apple.SafariNotificationAgent com.apple.usbmuxd com.citrixonline.GoToMeeting.G2MUpdate com.google.keystone.agent com.google.keystone.daemon com.microsoft.office.licensing.helper com.oracle.java.Helper-Tool com.oracle.java.JavaUpdateHelper com.oracle.java.JavaUpdateHelper org.macosforge.xquartz.privileged_startx org.macosforge.xquartz.privileged_startx org.macosforge.xquartz.startx ' ' 879294308 4071182229 461455494 3627668074 1083382502 1274181950 1855907737 2758863019 1848501757 464843899 3694147963 1233118628 2456546649 2806998573 2778718105 2636415542 842973933 2051385900 3301885676 891055588 998894468 695903914 1443423563 4136085286 523110921 2883943871 3873345487 ' 51 5120 files );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^\([0-9]+\) /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n-\t%s\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' s/[0-9A-Za-z._]+@[0-9A-Za-z.]+\.[0-9A-Za-z]{2,4}/EMAIL/g;/faceb/s/(at\.)[^.]+/\1NAME/g;/\/Shared/!s/(\/Users\/)[^ /]+/\1USER/g;s/[-0-9A-Fa-f]{22,}/UUID/g;' ' s/^ +//;/de: S|[nst]:/p;' ' {sub(/^ +/,"")};/er:/;/y:/&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: (E[^m]|[^EO])|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Genesy|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<10) print "com.apple.";} ' ' { sub(/ :/,"");print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:.+//p ' '/^root$/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1100) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/{next};/(etc|Preferences|Launch[AD].+)\// { sub(".(/private)?","");n++;print;} END { split("'"${p[41]}"'",b);split("'"${p[42]}"'",c);for(i in b) print b[i]".plist\t"c[i];if(n<500) print "Launch";} ' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| |\n","\\|\\|kMDItem'${p[35]}'=");sub("^...."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[43]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/{next};/%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";p="uniq -c|sed -E '"'s/ +\\([0-9]+\\)\\(.+\\)/\\\2 x\\\1/;s/x1$//'"'";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]$1|p;b=b$1;} END { close(p);if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n   "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n   [N/A]";"cksum "F|getline C;split(C, A);C="checksum "A[1];"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text(, with v.+)?$|(Bo|PO).+ sh.+ text ex|XM)/) F=F" ("T", "C")";else F=F" ("C")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n   ...and %s more line(s)\n",l-L);} ' ' s/^ ?n...://p;s/^ ?p...:/-'$'\t''/p;' 's/0/Off/p' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/\(L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9|"sort|uniq";} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ /V/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' ' /^find: /d;p;' "`S0 44 45`" ' BEGIN{FS="= "} /Path/{print $2} ' ' /^ *$/d;s/^ */   /;' ' s/^.+ |\(.+\)$//g;p ' '/\.(appex|pluginkit)\/Contents\/Info\.plist$/p' ' /2/{print "WARN"};/4/{print "CRITICAL"};' ' /EVHF|MACR|^s/d;s/^.+: //p;' ' $3~/\./ { i++;n=n"\n"$1"\t"$3;} END { if(i>1) print n;} ' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps crontab iotop top pkgutil 'PlistBuddy 2>&1 -c "Print' whoami cksum kextstat launchctl smcDiagnose sysctl\ -n defaults\ read stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' pluginkit scutil dtrace profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil lsof test osascript\ -e netstat );c2=(com.apple.loginwindow\ LoginHook '" /L*/P*/loginw*' "'tell app \"System Events\" to get properties of login items'|tr , \\\n" 'L*/Ca*/com.ap*.Saf*/E*/* -d 1 -name In*t -exec '"${c1[14]}"' :CFBundleDisplayName" {} \;|sort|uniq' '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 \)' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' :${p[35]}\" :Label\" '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$(RefProc): \$Message' -k Sender Req 'fsev|kern|launchd' -k RefProc Rne 'Aq|WebK' -k Message Rne 'Goog|ksadm|probe|Roame|SMC:|smcD|sserti|suhel| VALI|ver-r|xpma' -k Message Req 'abn|bad |Beac|caug|corru|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|NVDA\(|pagin|pci pa|proc: t|Roamed|rror|SL|TCON|Throttli|tim(ed? ?|ing )o|WARN' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cght] ! -name .?\* ! -name \*ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true \) -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '/S*/*/Ca*/*xpc* >&- ||echo No' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,Ex}* {/,}L*/{A*d,Ca*/*/Ex,Co{mpon,reM},Ex,In{p,ter},iTu*/*P,Keyb,Mail/B,Pr*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -path \\*s/Resources -prune -o -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,mach_i*/*,pam.d/*,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t {/S*/,/,}L*/Lau*/*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' '+c0 -i4TCP:0-1023' com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' "+c0 -l|awk '{print(\$1,\$3)}'|sort|uniq -c|sort -n|tail -1|awk '{print(\$2,\$3,\$1)}'" -m 'L*/{Con*/*/Data/L*/,}Pref* -type f -size 0c -name *.plist.???????|wc -l' kern.memorystatus_vm_pressure_level '3>&1 >&- 2>&3' " -F '\$Time \$Message' -k Sender kernel -k Message CSeq 'n Cause: -' " -i );N1=${#c2[@]};for j in {0..9};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents XPC\ cache Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching SATA Descriptors App\ extensions Lockfiles Memory\ pressure SMC Shutdowns Nets );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};A'$((7+i))'() { v=` eval sudo "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};';done;A9(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0() { [[ "$v" ]]&&sed -E "$s"<<<"$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v"|sed -E "$s";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "${s[63]}"<<<"$v"`&&C1 1 $1;};for i in 1 2 7 8;do for j in 0 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;D20 0 $((N1+1)) 2;D10 0 $N1 1;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;D13 0 $((N1+9)) 59 50;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;B1&&D73 19 53 67 55;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 54 12 56;D23 5 14 12 14;D22 6 36 13 15;D22 20 52 66 54;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D82 35 49 61 51;D82 11 17 17 20;for i in 0 1;do D82 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A8 18 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;B3 4 0 65;A3 14 6 32 0;B4 0 16 11;A1 26 50 64;B7 16;C3 52;D13 24 24 32 31;D13 25 37 32 33;A2 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D73 21 0 32 19;D73 10 42 32 40;D82 29 35 46 39;};D23 14 1 62 42;D12 34 43 53 44;D12 22 20 32 25;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 21 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 38 55 68 57;D23 33 34 42 37;B1&&D83 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 10 42 32 41;D13 37 2 48 43;D13 4 5 32 1;D13 4 3 60 5;D12 21 48 49 49;B3 4 22 57;A1 21 46 56;B7 22;B3 0 0 58;C3 47;D22 4 4 50 0;D12 4 51 32 53;D23 22 9 37 7;A9;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
    Copy the selected text to the Clipboard by pressing the key combination command-C.
    8. Launch the built-in Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad and start typing the name.
    Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
    9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
    exec bash
    and press return. Then paste the script again.
    10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return  three times at the password prompt. Again, the script will still run.
    If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
    11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
    [Process completed]
    to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report what happened. No harm will be done.
    12. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
    At the top of the results, there will be a line that begins with the words "Start time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
    If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
    13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
    14. This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
    Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

  • FIRE FOX IS GETTING SLOWER AND SLOWER LOADING PAGES I GO TO ONLINE. IT LOAD CIRCLE STOP SPINNING AND WILL START BACK BUT IT TAKES IT'S TIME TO DO SO. THIS HAS BEEN GOING ON THROUGH THE LAST SEVERAL UPGRADES.

    FIRE FOX USED TO BE A FAST BROWSER BUT IT IS GETTING SLOWER AND SLOWER. THE BLUE-E IS ABOUT TO THE POINT OF BEING FASTER THEM THE FOX. I HAVE ALWAYS LIKE THE FOX, JUST WANT TO FIGURE OUT THE PROBLEM WITH IT AND THE LONGER I HAVE THE WINDOW OPEN ARE UP THE WORSE IT GETS. I DO A LOT OF GAMING ON FACEBOOK PLAYING MAFIA WARS BUT THE PROBLEM IS NOT LIMITED TO JUST THERE IT IS ALL THE TIME AND EVERY WHERE. I HAVE TRIED ADD-ON'S THINKING THEY MAY HELP BUT NOTHING HAS DONE ANY GOOD. CHROME IS TWICE IF NOT THREE
    TIMES AS FAST AS THE FOX LATELY ON LOADING PAGES.

    For what it's worth, you posted this in 2011, and here in 2014 I am still having this same issue. Over the last two days, I have had to unlock my apple account 8 times. I didn't get any new devices. I haven't initiated a password reset. I didn't forget my password. I set up two factor authentication and have been able to do the unlocking with the key and using a code sent to one of my devices. 
    That all works.
    It's this having to unlock my account every time I go to use any of my devices. And I have many: iMac, iPad, iPad2, iPad mini, iPhone 5s, iPod touch (daughter), and my old iPhone 4 being used as an ipod touch now.  They are all synced, and all was working just fine.
    I have initiated an incident with Apple (again) but I know they are just going to suggest I change my Apple ID. It's a simple one, and one that I am sure others think is theirs. I don't want to change it. I shouldn't have to. Apple should be able to tell me who is trying to use it, or at least from where.
    Thanks for listening,
    Melissa

Maybe you are looking for