Layer 0 exceeds the maximum layer size allowed.

I am getting the following message and do not know what to change in my pref.
Formatting was not successful. Layer 0 exceeds the maximum layer size allowed. Please choose a suitable marker location that will support this condition.

No change in preferences, it is something you need to make a marker for on a DL Disc
On the layer break some threads below - basically there needs to be a marker somewhere so that is around 1/2 way give or take Take a look at the PDF pages 576-586 for some of the details.
http://discussions.apple.com/thread.jspa?messageID=4274608&#4274608
http://discussions.apple.com/thread.jspa?messageID=4470720&#4470720
http://discussions.apple.com/thread.jspa?messageID=4309773&#4309773

Similar Messages

HELP!!! layer 0 exceeds the maximum layer size allowed (DVD STUDIO PRO)

when I try to burn a dual dvd with 7.1 gb on it. The discs are 8.5gb dual dvd's, it says this in the error box.
Formatting was not successful. Layer 0 exceeds the maximum layer size allowed. Please choose a suitable marker location that will support this condition.
I have tried to dual layer break point on a chapter half way through and other locations, but it still says it. What do I do???? I need to get this done ASAP!!!!! Can you please help, its kinda a emegency!!!!!!
please email me back at [email protected]
Thanks so much
G5 Mac OS X (10.4.6)

Hey timeline
welcome to the apple boards...
ill give you the easy fix, although i would recommend the proper fix.
first, build your project on any of your drives so you can see your audio and video TS folders.
once you see your build, then click on "Format" and before you click on format (on the lower right hand corner of the Format window, click on the second tab and under "Layer Break" click the drop down box and whatever is NOT greyed out, can be used as a layer break.
the more proper way do it it would require you to do some calculations based on the amount of video in your project and re-encode your video.
hope that helps
Mikey M.

Formatting was not successful. Layer 0 exceeds the maximum layer size

I am attempting to burn my first dvd w/ dvdstudio pro. I pressed burn. Processing took approximately 25 minutes. Everything seems to be goin well. The I get the following message,
"Formatting was not successful. Layer 0 exceeds the maximum layer size allowed. Please choose a suitable marker location that will support this condition."
Can anyone help me out with this?
The following info was in the build log,
Starting DVD Build MUSICVIDEOMIXTAPE...
Compiler Initializing...
Precompiling Project MUSICVIDEOMIXTAPE
Compiling VMG Information...
Created 8 PGCs in VTSM1
Created 5 PGCs in VTSM2
Created 8 PGCs in VMG.
1 Menu(s) will be created...
Compiling Menu PGCs...
Compiling Menu#1 (Menu 1)...
Rendering Menu:Menu 1,Language:1...
Generating Transition: VTSM #01, VOB #1...
Writing VIDEO_TS.VOB
Compiling Menu PGCs...
Writing VTS020.VOB
2 VTSs and 2 Titles will be created...
Compiling VTS#1 (drivin me wild- Common & Lilly Allen)...
Muxing VTS011.VOB
Done.
Compiling VTS#2 (d12 vid mix tape)...
Writing VTS020.VOB
Muxing VTS021.VOB
Done.
Linking VMG...
Linking VTS#1...
Linking VTS#2...
Writing VTS#1...
Writing VTS#2...
Writing VMG...
Writing Layout Info...
Compile Completed Successfully
Note: The file ‘MUSICVIDEOMIXTAPE.layout’ found in the ‘VIDEO_TS’ folder is not a DVD-Video file and will not be included in the final disc or DLT.
Note: The file ‘VOB_DATA.LAY’ found in the ‘VIDEO_TS’ folder is not a DVD-Video file and will not be included in the final disc or DLT.
Formatting was not successful. Layer 0 exceeds the maximum layer size allowed. Please choose a suitable marker location that will support this condition.

It sounds like you are trying to burn a dual layer disc. Do you need a dual layer disc? (i.e., do you have more than 4.3 GB of material?) If you do then there is a tutorial at;
http://www.kenstone.net/fcphomepage/dual_layer_mediagary.html

Stream analytics - Exceeded the maximum number of allowed receivers per partition in a consumer group which is 5

Hi,
I have configure stream analytics to read messages from eventhub and I am getting this error message:Correlation ID:
e185534f-9e82-4efc-8050-5294796fb275
Error:
Exceeded the maximum number of allowed receivers per partition in a consumer group which is 5 TrackingId:4569eca8-cb70-4c50-96cd-5868bfbc3e37_B45,TimeStamp:1/7/2015 11:40:37 PM TrackingId:f408292e-0dab-40cc-8ae9-2730313c3241_B45, Reference:8fca3c6a-b0d1-41cf-a835-f7c74a2ea8c3,
Timestamp:1/7/2015 11:40:37 PM
Message:
Exceeded the maximum number of allowed receivers per partition in a consumer group which is 5
Message Time:
2015-01-07 23:40:38Z
Microsoft.Resources/EventNameV2:
sharedNode92F920DE-290E-4B4C-861A-F85A4EC01D82.naveenevents_0_c76f7247_25b7_4ca6_a3b6_c7bf192ba44a#0.output
Microsoft.Resources/Operation:
Receive Events
Microsoft.Resources/ResourceUri:
/subscriptions/f122f431-ddc7-4e21-ae3a-f6a9e1273bcb/resourceGroups/StreamAnalytics-Default-Central-US/providers/Microsoft.StreamAnalytics/streamingjobs/Naveenstreamanalytics
Type:
EventHubInputAdapterEventHubFailure
Any help on the same is appreciated.
Thanks
Naveen

Hi Naveen,
Thanks for reporting this issue. We are taking a look at this issue.
Questions:
Do you have multiple readers reading from this EventHub, or have you setup multiple Stream Analystics jobs reading from this event hub. You are hitting a limitation of how many readers are allowed per EH consumer group.
What is the serialization format of your input (JSON/CSV)? Could you please verify the serialization format setup in the streaming job and if it matches your data?
Thanks
Zafar Abbas

What is the maximum file size allowed by Yosemite's Archive Utility?

I've seen radically different answers to this question, ranging from ".zip files have a 4GB size limit" to "no limit other than the OS maximum file size". It's been very difficult to find current info on this.
I have lots of large folders full of recording projects --- I'm talking up to 45GB or so --- and I've been experimenting with different methods of zipping them in preparation for cloud backup. Several applications have been willing to zip my enormous folders into archives, but then choke when unzipping them, telling me that the files cannot be unzipped or are corrupted. Using the "Compress" shortcut in the finder has so far yielded the best results, keeping all necessary resource forks, etc., and unzipping properly, even when other apps have insisted the files are corrupted. However, I'm afraid to continue with this procedure until I can get a straight answer on this issue: have I just been lucky so far? IS there an actual size limit?
...It only seems to work when I both zip and unzip with the Archive Utility. Other archiving apps will either render the included projects unreadable by my recording software when zipping (I suspect because of alteration or stripping of resource forks), or will refuse to read the giant .zip archives generated by Archive Utility.
I've set up the Archive Utility to produce .zip files, as I feel these are the most likely to be recognized by a variety of cloud storage services.ny
...Any guidance would be greatly appreciated!

Hi,
The 1,048,576 rows & 16,384 columns is the
workbook size limitation in Excel 2013. Thus, I recommend we try the Mr. Bernie's suggestions to import the large CSV file.
1. Use VBA to read the file line by line and split/examine the import file in sections. If you have further question about the VBA, please post your question to the MSDN forum for Excel
http://social.msdn.microsoft.com/Forums/en-US/home?forum=exceldev&filter=alltypes&sort=lastpostdesc
2. Use Excel 2013 add-ins. Power Pivot and Power Query. For more detailed information, please see the below articles:
http://social.technet.microsoft.com/Forums/en-US/9243a533-4575-4fd6-b93a-4b95d21d9b10/table-with-more-than-1-048-576-rows-in-power-query-excel-2013?fo
http://www.microsofttrends.com/2014/02/09/how-much-data-can-powerpivot-really-manage-how-about-122-million-records/
Please Note: Since the web site is not hosted by Microsoft, the link may change without notice. Microsoft does not guarantee the accuracy of this information.
Thanks
George Zhao
Forum Support
Come back and mark the replies as answers if they help and unmark them if they provide no help.
If you have any feedback on our support, please click "[email protected]"

The request exceeds the maximum allowed database size of 4 GB

I have craeted a user in oracle 10g with following commands
CRAETE USER USERNAME IDENTIFIED BY PASSWORD
DEFAULT TABLESPACE users TEMPORARY TABLESPACE temp;
Grant create session to USERNAME;
Grant create table to USERNAME;
Grant create view to USERNAME;
Grant create trigger to USERNAME;
Grant create procedure to USERNAME;
Grant create sequence to USERNAME;
grant create synonym to USERNAME;
after that when i want to craete a table i got following error
SQL Error: ORA-00604: error occurred at recursive SQL level 1
ORA-12952: The request exceeds the maximum allowed database size of 4 GB
00604. 00000 - "error occurred at recursive SQL level %s"

Error starting at line 1 in command:
SELECT /* + RULE */ df.tablespace_name "Tablespace", df.bytes / (1024 * 1024) "Size (MB)", SUM(fs.bytes) / (1024 * 1024) "Free (MB)", Nvl(Round(SUM(fs.bytes) * 100 / df.bytes),1) "% Free", Round((df.bytes - SUM(fs.bytes)) * 100 / df.bytes) "% Used" FROM dba_free_space fs, (SELECT tablespace_name,SUM(bytes) bytes FROM dba_data_files GROUP BY tablespace_name) df WHERE fs.tablespace_name = df.tablespace_name GROUP BY df.tablespace_name,df.bytes
UNION ALL
SELECT /* + RULE */ df.tablespace_name tspace, fs.bytes / (1024 * 1024), SUM(df.bytes_free) / (1024 * 1024), Nvl(Round((SUM(fs.bytes) - df.bytes_used) * 100 / fs.bytes), 1), Round((SUM(fs.bytes) - df.bytes_free) * 100 / fs.bytes) FROM dba_temp_files fs, (SELECT tablespace_name,bytes_free,bytes_used FROM v$temp_space_header GROUP BY tablespace_name,bytes_free,bytes_used) df WHERE fs.tablespace_name = df.tablespace_name GROUP BY df.tablespace_name,fs.bytes,df.bytes_free,df.bytes_used ORDER BY 4 DESC
Error at Command Line:1 Column:319
Error report:
SQL Error: ORA-00942: table or view does not exist
00942. 00000 - "table or view does not exist"
*Cause:
*Action:

Layer 0 exceeds the max layer

When I try formatting a dvd I get the message: Layer 0 exceeds the max layer size allowed please choose a suitable marker location that will support this condition.
I brought in a 2 hour and 45 minute vcr video and added chapter markers. Does this simply mean the size is too big or what is it looking for?
Thank You

DUAL LAYER BREAK POINTS
Basically when burning a DL disc there needs to be something called a "break point" which is effectively a marker at what is considered a "permissable" spot for a break point. The requirements for break points have certain conditions (Layers cannot exceed certain sizes, Layer 0 needs to be larger than Layer 1 etc.) If there is not a marker that meets these conditions, then you will get various error messages.
1.) In a DL disc Layer 0 needs to be larger than Layer 1
2.) A marker needs to be placed as a Layer Break in the project to indicate the layers.
3.) You can start by assuming the marker will be right around the 1/2 point of the disc (give or take)
4.) Find the place which is about 1/2 way and put a few markers in there
5.) Build the DVD to the hard drive then select format. If there is a suitable layer break marker it will be black otherwise it will be gray.
Look [over here|http://dvdstepbystep.com/break.php] has generally the same info and some links for things to look at.
and [this thread|http://discussions.apple.com/message.jspa?messageID=11256039#11256039]

Project exceeds the maximum allowed content

Please let me know how I can correct this error message that I get when I decide to burn my DVD. (Project Duration Your project exceeds the maximum allowed content duration. You will not be able to burn your DVD).
Thank you;

Hello, Thomas,
Welcome to the discussions!
You will get the 'exceeds the maximum allowed content duration' message if your DVD project exceeds the time limit for the type of burn you have selected.
1. If your project, usually iMovie, is over 2hrs, you cannot burn it to a single layer DVD.
2. If your project is under 2hrs but your menus and submenus' audio and video content is extensive, your project will exceed the DVD capacity.
3. Most commonly, your project is over 2 hrs, but you have selected "best performance" in DVD preferences instead of "best quality." 'Best performance' is for projects that are under 60min, and 'best quality' is for those over 2 hrs. You change this in DVD preferences.
Explanation for the differences (adapted from David Pogue's little iDVD4 pamphlet):
"Choosing best performance for shorter projects allows the DVD app to allot a fixed amount of data to each frame of video, enough to make it look great no matter how many minutes of video it includes(up to 60min) so that a lot of the DVD can end up empty, but the burning process goes quickly and the video looks great.
Choosing best quality allows the DVD app to us all the space on the balnk DVD by analyzing the amount of video included and dividing it into the amount of space available on the DVD so that the amount of information used for each frame will vary from project to project, and it will take longer to burn because of the analysis time. But, it will give 2 hrs of great-looking video per disc."
Does this help??
Post back if you are still having problems, and if so, be specific in what you are trying to do and what is not working.

Error message in the report: Exceeded configured maximum number of allowed

Hi,
When i'm running one report, it's throwing the following error.
Error
View Display Error
Exceeded configured maximum number of allowed input records.
Error Details
Error Codes: EKMT3FK5:OI2DL65P
SQL Issued: 3302~v9p2gfbm0sfk91lrj16oe7srm2
This is most common error. my report is retreiving 469,501 rows in the database.
These are the settings in the instanceconfig.xml :
<Views>
- <Pivot>
<MaxPagesToRollOutInDelivery>1000</MaxPagesToRollOutInDelivery>
<MaxVisibleColumns>500</MaxVisibleColumns>
<MaxVisiblePages>2500</MaxVisiblePages>
<MaxVisibleRows>1000000</MaxVisibleRows>
<MaxVisibleSections>10000</MaxVisibleSections>
<DefaultRowsDisplayed>1000000</DefaultRowsDisplayed>
- 
<DefaultRowsDisplayedInDelivery>1000</DefaultRowsDisplayedInDelivery>
- 
<DefaultRowsDisplayedInDownload>100000</DefaultRowsDisplayedInDownload>
- 
<DisableAutoPreview>false</DisableAutoPreview>
</Pivot>
Max visible rows are higher than my report rows, but still it is throwing error.
Please any suggestions !!!!
Thanks in Advance

Just in case try to set other views and see how it works
http://docs.oracle.com/cd/E23943_01/bi.1111/e10541/answersconfigset.htm#CIHHBHEB
In WebLogic FMW Control or EM:
http://server.domain:7001/em
Click on Fam_bifoundation_domain -> Business Intelligence -> coreapplications -> Capacity Management -> Performance
Maximum Number of Rows Processed when Rendering a Table View
Number Of Rows:
Maximum Number of Rows to Download
Number Of Rows

Why Cant I Add Drop Shadow? artwork size & resolution exceeds the maximum that can be rasterized

I am making a sign for sign writing. The overall size is 2400mmx1800mm. so its quiet big.
But When I go to put a drop shadow behind it it comes up with this -
" The combination of artwork size & resolution exceeds the maximum that can be rasterized"
Why is it saying this? How do I put a drop shadow on it?

Try scaling the sign down to 600 x 450mm and building your drop shadow at a more manageable size. When you deliver your file for output, tell the vendor to enlarge the file 400% in the RIP. If it still will not work, check your HD for scratch space. If there is not enough memory available to run the operation, you will continue getting the message until you clear some space and/or increase your RAM ( if necessary ).

The following files weren't attached because adding them would cause the message to exceed the maximum size limit of 35 MB: MALAWI .pptx.

The following files weren't attached because adding them would cause the message to exceed the maximum size limit of 35 MB.
I have had my macbook pro since June and have had no problems sending an email until I have tried to send a presentation today. The above message is what I keep receiving even after using 3 email accounts.

Email providers often set file size limitations to conserve bandwidth and prevent service overload. Most common seems to be a limit on the order of 21 MB. If possible, break your presentation into two parts and send as two messages.

The following files weren't attached because adding them would cause the message to exceed the maximum size limit of 10 MB

Dear sir/madam
I installed exchange server 2013
my clients want to attache more than 10 MB
when they attache more than 10 MB they got this massage "The following files weren't attached because adding them would cause the message to exceed the maximum size limit of 10 MB"
so how can you help me to increase the attachment size and the way to do that
how can I change the default 10 MB
Please can you help me as soon as
Rawa Zangana

Hi Rawa,
You can use EAC or EMS to set the MaxSendSize. The default value of MaxSendSize is 10 MB.
If you use EAC, here is the steps:
Logon to EAC -> Mail flow -> Receive connectors -> settings-> type the Maximum send message size you want to set
If you use EMS, please use the cmdlet Rajith provided.
Hope it helps.
Best regards,
If you have feedback for TechNet Subscriber Support, contact
[email protected]
Amy Wang
TechNet Community Support

The combination of artwork size and resolution exceeds the maximum that can be rasterized.

hi there, im rajesh M S Aaryan, Creative agent @ SmartDesignstudios. which i founded.
here is my Solution for above Question
Created File by giving 48 Inches (Hieght) * 240 inches (width) in Illustrator after Complete design, i just tried Export it to .Tif Format but error Occurred "the combination of artwork size and resolution exceeds the maximum that can be rasterized".
Answer: Save the file as EPS format and open in Photoshop do no alter anything finally save as .Tif Format
this actually works

yes we can create
try to Export into .tiff format"
you'll get this error
the combination of artwork size and resolution exceeds the maximum that can be rasterized.

Can't setup iCloud V 4. I get error: You have exceeded the maximum number of 25000 allowed events and tasks. I get this error no matter what choice I select to setup.

Can't setup iCloud V 4. I get error: You have exceeded the maximum number of 25000 allowed events and tasks. I get this error no matter what choice I select to setup.

Is your I tunes ID an @me.com ID? If not, i cloud ONLY works with an @me.com ID. You will have two ID's. One for I cloud, one for I tunes

Is there a way around the Maximum File size of 2.0 GB Exceeded message???

I tried to bounce a two hour mix set for the first time today, and I received this message
---->Maximum File size of 2.0 GB Exceeded
I've tied fiddling with the tempo (read somewhere that this might help), but to no avail. I originally wanted to bounce a file down to 192 kbps. I mean is there no way to record anything over an hour and a half into Logic?
Please advise! Thanks!

Yes. Use the .caf file format. No file size restrictions.
LP8 Use4r Manual. p. 359:
*Maximum Recording Size*
+The AIFF and SDII file formats can not handle audio file recordings larger than 2 GB:+
• For 16 bit, 44.1 kHz stereo files, this equals a recording time of about 3 hours and 15+
minutes.
• For 24 bit, 96 kHz, 5.1 surround files, this equals a recording time of about 20 minutes.+
+The WAV file format can not handle audio file recordings larger than 4 GB:+
• For 16 bit, 44.1 kHz stereo files, this equals a recording time of about 6 hours and 30+
minutes.
• For 24 bit, 96 kHz, 5.1 surround files, this equals a recording time of about 40 minutes.+
+If the size of your recording will exceed these limits, you should choose CAF as the+
+recording file type. CAF can handle the following recording times:+
• About 13 hours and 30 minutes at 44.1 kHz+
• About 6 hours at 96 kHz+
• About 3 hours at 192 kHz+
+The bit depth and channel format (mono, stereo, surround) do not affect the maximum+
+recording size of CAF files.+
+You can define the preferred file type in the Recording File Type menu of the Logic Pro+
+> Preferences > Audio > General preferences.+
regards, Erik

Layer 0 exceeds the maximum layer size allowed.

Similar Messages

Maybe you are looking for