Layer 2 isolation due to Multiple Anchor controllers

Hello,
Just checking to see if there are 2 anchor controllers in different locations, that if client A connects to anchor controller A and client B connects to anchor controller B, will there be Layer 2 isolation between the 2 clients?
Thanks,
Jason

same subnet but different anchors in different parts of the US. so hosts local to that anchor are switched. the networks are not shared except the same L2 subnet, and the original controller. so what would have to happen is that host traffic would have to cross back over the EoIP tunnel to the internal controller, and then cross the other EoIP tunnel back to the other controller to talk to those hosts. I don't believe this is possible, but want to confirm that. this was setup by an outside consultant before I got there.
thanks,
Jason.
Sent from Cisco Technical Support iPad App

Similar Messages

Load balancing to multiple anchor controllers

Checking to see if there is a way to control how the inside controller load balances to 2 anchor controllers. I was told its connection by connection, but wasn't sure if its true, and if that could be changes to a particular hash or something.
Thanks,
Jason

There is no configuration to define what will be the primary or secondary path. The foreign WLC will determine which anchor it will send the traffic to.
Thanks,
Scott
*****Help out other by using the rating system and marking answered questions as "Answered"*****

Create Multiple Build Controllers in Team Foundation Server 2013

Hi all,
I have created an environment of Team Foundation Server 2013 & also installed SharePoint Foundation 2013. Everything is working fine. I have created a build controller on the same machine on which I have installed the TFS. This build controller is used
for building the projects of a Team Project Collection. I know that a build controller can only be used for one Team Project collection. Creating multiple build controllers on the same machine is not recommended by Microsoft.
I have another team project collection, for this I need to create another build controller. Could you please tell me how to create another build controller on a different machine.
Please help me with this.
Thanks.

Hi Vishwajeet,
You can do this by installing TFS in another machine (do not configure as app tier), and then configuring build services.
Complete instructions are in my post here http://chamindac.blogspot.com/2014/02/06-setup-build-server-setup-virtual.html
Setting up a TFS environment step by step explained in this blog series
http://chamindac.blogspot.com/2013/12/setup-virtual-environment-for-tfs-2013.html
My posts explain how to setup on virtual box but it is same steps even if you setup in hyperv VM or in a standard machine.
One more recommendation I would like to make here is, it is better if you do not configure build services in TFS App Tier. Use separate build servers. Another one is do not create too many project collections. Project collections require separate build servers,
test controllers etc. because one is fully isolated from another collection. So carefully plan your TFS environment. I recommend you to download and read TFS Planing Guide from ALM Rangers from here
http://vsarplanningguide.codeplex.com/releases
Cheers!
Chaminda

In Flash CS4, how do you select multiple anchor points across separate layers?

I am talking about anchor points on a line, not a keyframe. They are also called "handles". I can select the anchor points as "white" quickly, but I can't get them to be "solid"without doing it layer by layer, which is tedious. What I want is way to select lines that are in different layers and get the points I selected in a way similar to the regular selection tool or free transform tool. I have been trying to do this all day and I can't find a good way to do this, and I would appreciate any help.
Here is an image of what I'm trying to do, but more easily. The lines are on separate layers, but when I select them with the subselection tool I have to go layer by layer selecting the points. I'm trying to look for a very quick way of doing it. When I do select all with the subselection tool on, the anchor points are only "white" and not "solid" as shown below.

Now you're post was a while ago and I still need a solution, but I have to say this. I didn't mean to be rude to you; it’s just that it doesn’t answer my question I specified in the original post. I know your intentions are good, but it frustrates me when someone doesn’t fully read a post and offers a solution, it sometimes gives a false impression that the problem is taken care of. Example of being "helpful": http://forums.adobe.com/message/2540277 Yes I know there is a “Yes, my question has been answered,” but you know they don’t always select it, and other people know that as well. But you are right; I should probably act a little bit nicer and reiterate what I’ve already said before, I’ll probably get more help from it. It just seems to be a simple feature that seems to be needed to be in the program. I didn't mean it takes forever to move, it takes forever to select multiple anchor points across, let's say 10 layers, so that's 10 different lines on 10 layers. You have to select each layer and then select the anchor points. If there is an away to select anchor points across all layers in one go please tell me. Maybe I was wrong, but I could’ve sworn I’ve seen ideas that were posted on here get taken into Adobe as a suggestion, but yes I submitted it as a suggestion to Adobe, but I wanted to confirm that there was no way of doing it first since it seems kind unbelievable because the regular selection tool works across multiple layers.

Announcing the availability of enabling Windows Server 2012 R2 Essentials' integration of Microsoft online services in environments with multiple domain controllers

In Windows Server Essentials 2012 R2, all of our online services integration features, including Azure Active Directory and Office 365, are supported only in environments that
have a single domain controller. In environments with more than one domain controller, integration of these services is blocked due limitations in the user account and password synchronization mechanism in Windows Server Essentials.
I am happy to announce that with the recent Windows August Update released on (8/12/2014, PST), this limitation has been removed. This update adds support for both Azure
Active Directory integration and Office 365 integration features in domain environments consisting of a single domain controller, multiple domain controllers, or Windows Server Essentials as a domain member server.
For more information, please go to
http://support.microsoft.com/kb/2974308

Hi JoeBeck,
Thanks for the comment. Could you please tell which link you clicked to download?
Please go to PinPoint check details and start download
http://pinpoint.microsoft.com/en-US/applications/Dynamics-CRM-Online-Add-in-12884966386
Thanks,
Shanghai Wicresoft

Is it possible to select multiple anchor points in CS6?

Hi,
I'm trying to select multiple anchor points of shapes across different layers by dragging over them, but nothing is getting selected.
I use CC at work, and I've done it there, but I use CS6 at home and can't seem to do it.
Thanks!

I doN'T think it is possible to work on two different path at once. I think you would need to merge the two shape layers and work on the resultant merged path. You can target more then one shape layer and select some of the path and change them however the stay separate path and all the point the the selected shape layers are highlighted
CS6 top CC bottom note the difference is the path palettes CS6 shows no paths in the path palette when more then a single shape layer is targeted where CC shows all path involved as separate paths.

Layer 2 isolation between VSG zones

Hi All,
Could you please instruct me on following.
Is there a way to achieve layer 2 isolation between logical
zones in VSG (virtual security gateway) environment?
Regards
Jagath

same subnet but different anchors in different parts of the US. so hosts local to that anchor are switched. the networks are not shared except the same L2 subnet, and the original controller. so what would have to happen is that host traffic would have to cross back over the EoIP tunnel to the internal controller, and then cross the other EoIP tunnel back to the other controller to talk to those hosts. I don't believe this is possible, but want to confirm that. this was setup by an outside consultant before I got there.
thanks,
Jason.
Sent from Cisco Technical Support iPad App

New technique to place multiple anchored objects in InDesign story

Hello,
For a while I have been trying to figure out how to insert multiple anchored objects into an Indesign story. As far as I can tell, you cannot copy multiple objects that have already been placed in a document (such as a multi-page pdf) into an InDesign story, but must copy and paste them one-by-one into the story. This is a problem for a project I am working on where I want to have a large number of 340x52 pt pdfs to flow throughout a document in a master text frame interspersed with text.
I have now found a solution for this issue that I thought I would share in case it would be helpful for anyone. It utilizes Automator actions for Mac OS X and Microsoft Word 2011 [2008 may work also, but I don't have a copy of that to test]; I am not good with scripting but perhaps similar solutions could be found for other systems and programs.
1. If you want to place a multipage pdf within a text frame, first it into individual files for each page (with Acrobat Pro or pdftk or something similiar).
2. Create an Automator service or program with the action "Create New Word Document". You can also use another automator action to save the document, or save it manually (to change the filename). In the finder, select the items you want, then run the service or drag them into the Automator program you have created.
3. Place the word document into your InDesign story. Your items will now be anchored objects ordered in your text frame as they were in the finder.
Please let me know if this is helpful or if anyone has suggestions for doing this process is a more efficient way. I am not sure, but it may be the case that this approach would only work on Macs, as I gather from this thread.

I might note that I am using InDesign CS 5, and importing from a document stored in docx format.

Is there a way to shift select multiple objects in layer palette, not just highlight multiple object

Hi,
Is there a way to shift select multiple objects in layer palette, not just highlight multiple objects?
I would want to do this when I have a bunch of objects hidden under some other objects on the artboard. This feature is available in PSD, so I assume Illustrator should have it.
Thanks!

Thanks for the reply, Harron.
I'm using CS4 & below.
Highlighting object - click on object in layers palette & it turns blue
Select object - click on object in layers palette to the right of the circle, which creates a square, and selects the object on the artboard
How do I shift-select multiple objects in the layers palette...select 50 objects with a click, then a shift-click? Shift-select works for highlighting, but not selecting. On most programs shift-select is used to grab a bunch of stuff...:0)
In the past I have inadvertently selected multiple objects in the layers palette, by somehow alt?-dragging over the layers...or something...I can't re-create it.

Need Multiple Units of Measure for a given material due to multiple vendors

Hello,
We have a requirement where we must have multiple units of measue (each, box, case, pallet) for a given material.
Background:
We have multiple vendors for one SAP material number. We need to store 4 levels of units of measure for each vendor+material combination.
Unit of Meaure levels
1. Each
2. Innerpack (ex: 12 each = 1 innerpack)
3. Box (ex: 36 eaches = 1 box)
4. Pallet (ex: 100 eaches = 1 pallet)
Standard SAP allows in MM01 additional data --> Units of Measure only 1 Ea, Box, Plt, etc.
Our requirement is to allow multiple Units of Measure due to multiple vendors providing the same material.
So, our unique combination is by a Material+Vendor.
We are considering adding the vendor name and vendor number to the material master --> additional data --> Units of Measure tab.
Does this seem like a good solution? What impacts do you foresee with approach?
Any alternatve solutions?
We thought we could enhance the purchasing info records to allow multiple units of measure too but then we need to also add many fields to hold the weight, lenght, height, width, volume, country of origin, etc.
Please recommend a best practice or solution to handle this requirement.
Thanks in advance!!!

Hi,
Maintain the alternative units in Material Master in Additional Data -> Units of Measure section with proper conversion factors.
Create individual info-records i.e. per mtl-vendor combination & in the info-record maintain the order unit, along with other details as required.
Now when you create a PO, the details will be read from the info-record. To test the same, create them in your sandbox & see if it meets your requirement.
Hope the above clarifies your query.
Regards,
Vivek

Cannot have multiple domain controllers with Essentials role in 2012 R2 Standard/Datacenter

Microsoft's Technet post on deploying Essentials Role in an existing AD environment states the following:
"The online service integration features only work when the server is a domain controller. Also, integration cannot be initiated if there are multiple domain controllers in the environment. The product team is investigating possible solutions."
http://blogs.technet.com/b/sbs/archive/2013/10/28/enabling-multiple-instances-of-windows-server-essentials-experience-in-your-environment.aspx
Microsoft Essentials Role product team, can you let us know when this will be fixed? I will not be installing Essentials as a Role if I cannot have multiple domain controllers.
As soon as I add another domain controller the Essentials role no longer functions as designed.
This is quite an oversight by your team. Can we have an ETA for a fix to this please?
Here are more with the same issue:
http://social.technet.microsoft.com/Forums/en-US/ed34abe9-6412-415d-950a-50c9675deb2e/unable-to-register-essentials-experience-role-with-microsoft-online-services?forum=2012R2EssentialsPreview

Hi. We can't give ETA. Most user there that help does not work for Microsoft. (and if a Microsoft's employee help, then it's on it's free time at home or during break)
Thus, for that reason, please call the support to get a good answer on the ETA is it's planned or not. Be advised that the essential's version replaced the SBS, thus it target small office, such limitation can stay for a long time IMO.
Regards, Philippe

VSAN Isolation due to domain manager other side not responding

I am trying to configure VE port between Cisco nexus 7K and 5K switches but the vfc is not operational as VSAN isolation.
I have bind the VSAN 100 to VLAN 100 and add vfc into vsan database, but the VSAN 100 is still operational down
error msg shown: VSAN Isolation due to domain manager other side not responding?
StorageVDC# show vlan fcoe
Original VLAN ID        Translated VSAN ID      Association State
      100                       100              Operational
vsan 100 information
         name:VSAN0100 state:active
         interoperability mode:default
         loadbalancing:src-id/dst-id/oxid
         operational state:down <<<<
StorageVDC# show vlan
VLAN Name                             Status    Ports
1    default                          active    Eth2/5
100 VLAN0100                         active    Po401, Eth2/3, Eth2/4
StorageVDC# show int vfc-port-channel 401
vfc-po401 is trunking (Not all VSANs UP on the trunk)
    Bound interface is port-channel401
    Hardware is Ethernet
    Port WWN is xxxxx
    Admin port mode is E, trunk mode is on
    snmp link state traps are enabled
    Port mode is TE
    Port vsan is 100
    Speed is 20 Gbps
    Trunk vsans (admin allowed and active) (100)
    Trunk vsans (up)                       ()
    Trunk vsans (isolated)                 (100) <<<<<
    Trunk vsans (initializing)             ()
    608 fcoe in packets
    51072 fcoe in octets
    1762 fcoe out packets
    135612 fcoe out octets
    Interface last changed at Thu Jan 10 10:47:27 2013

Well, it wasn't a DNS issue, it was a routing issue that affected ISP customers in half of the country. https://community.shaw.ca/thread/9284?start=0&tstart=0
I can confirm that iTunes will now open and is functional. It seems that if the application can't access some internet resource immediately when it launches it will immediately lock up and never come back! No offline mode??!?!

Can WLC create EoIP tunnels to more than one Anchor Controllers

Hello,
Is it possible to create EoIP tunnels to two different Anchor Controllers on two different DMZs from a single WLC. So we can tunnel the traffics of two SSIDs to different DMZ environments.
Anchor Controllers can create 71 connections to Foreign Controllers, but can Foreign Controllers create EoIP tunnels to more than 1 Anchors.
Regards,
Sinan

Just to note, an anchor WLC can be a WLC in the DMZ or even another foreign WLC which you want to anchor an SSID to. You only limited in very large environments when you might hit that max limit.
-Scott

DHCP loadsharing with redundant Guest Anchor Controllers

Hi
I have 2 x Redundant Guest Anchor Controllers (5508) located in 2 separate Data Centres with all the management and guest user VLAN spanned between two. Everything is working fine with the Guest WiFi access except the DHCP functionality as the Controllers are acting themselves as the internal DHCP Servers.
This is how I tried to distribute
network. 10.1.0.0/23
gateway: 10.1.1.254
Controller 1, DHCP Server pool: 10.1.0.2 - 10.1.0.254 Gw: 10.1.1.254
Controller 2, DHCP Server pool: 10.1.1.2 - 10.1.1.254 Gw: 10.1.1.254
As the user loadbalancing between the Anchor Controllers cannot be controlled (i.e. they are active/active), the same client sometime getting 2 different IP addresses from both the Controllers (as they do not talk to each other in terms of DHCP) hence depleting the pool addresses.
I guess one way of solving this is to just run 1 DHCP server in one of the controllers but that defeats the purpose of having N+1 Controllers. Is there a better way of doing the DHCP loadbalancing and having full redundancy at the same time?
Any suggestion will be greatly appreciated.
Regards

Thanks Scott, I understand that it's quite obvious to get an external DHCP Server, unfortunately it's not an option for us The weired thing is, it seems when a client joins the guest WiFi, both the Anchor Controllers (both functioning as DHCP servers with mutually exclusive IP Address space) are providing IP addresses. While the client accepts only one the other Controller still reserves the IP address unused and hence depleting the DHCP Pool.
I thought for load balancing (in the very beginning) the Foreign controller will forward the DHCP request to only one of tthe Anchor Controllers, but in reality it's forwarding it to both. I have tested this with only one test AP, so mobility doesn't seem to be an issue here. Any thoughts?

Essentials 2012 R2 Exchange Integration with Multiple Domain Controllers

Attempting to integrate Exchange Server 2012 with the Essentials wizard results in the error message: "This task must be performed on the domain controller." I've found several threads that speculate this is because there are multiple domain controllers
in the domain. Is there a workaround or patch available to resolve this issue? Why wouldn't Microsoft want the redundancy of multiple DCs?
Thanks.

Hi HartmannTek,
I agree with Robert.
We can get the following information from the article:
Services Integration Overview for Windows Server 2012 R2 Essentials - Part 1. Please refer to.
Currently, the Services Integration features, including Windows Azure Active Directory integration, Office
365 integration, Windows Intune integration, and on-premises Exchange integration, are only supported in a single domain controller environment. In addition, the integration wizard must be run on a domain controller.
Hope this helps.
Best regards,
Justin Gu

Layer 2 isolation due to Multiple Anchor controllers

Similar Messages

Maybe you are looking for