Layer 2 vs. Layer 3 roaming

We have a large network with AP350, and those do not support Layer 3 roaming.
I would like to know what is different in latency and functionality between Layer 2 and 3?
There is mentioned a WLSE in the Layer 3 design, but is it needed?
We are about to by WLSM and Sup720
Is there some technical document whish you could recommend?
Best regards,
Glenn

Some related documents.
http://www.cisco.com/en/US/netsol/ns340/ns394/ns348/ns337/netqa0900aecd800fad5c.html
http://www.cisco.com/en/US/products/hw/wireless/ps458/prod_technical_reference09186a00801c5223.html

Similar Messages

How to separate layer in layer palette using colour?

How can I separate the layer in layer palette using colour to increase the visualbility like the image below?

You could right click on the eye in the layer thumbnail
or from the layer panel flyout, select layer/group properties.
MTSTUNER

Photoshop Rename layer if layer exists?

I need to rename "Original Layer" to Original Image" When this layer exists. In photoshop
I've been trying this, but I get this error
error "Can’t make «class cCLr» 1 of document \"DE00ER515.psd\" of application \"Adobe Ph
otoshop CS6\" into type boolean." number -1700 from «class cCLr» 1 of document "DE00ER515.psd" to boolean
tell application "Adobe Photoshop CS6"
          tell current document
                    if (quick mask mode) then delete channel ¬
                              "Quick Mask"
                    if layer "Original Layer" then ¬
                              set OriLayer to "Original Layer"
                    set OriLayer to make layer with properties {name:"Original Image"}
                    delete layer "Original Image"
          end tell
end tell

Thats still gave an error. The error it first runs into the if layer.....
this appears to work now like this.
tell application "Adobe Photoshop CS6"
          tell current document
                    if (quick mask mode) then delete channel ¬
                              "Quick Mask"
                    if (exists layer "Original Layer") then ¬
                              tell layer "Original Layer" to set name to "Original Image"
          end tell
end tell
Many thanks
Matt

How to create new canvas at photoshop and apply a layer by layer name?

How to create new canvas at Photoshop and apply a layer by layer name ?
So simply what i want is
Create a new canvas certain size such as 150x40 pixels
Apply a layer to that canvas. Script will select the layer by layer name
How can i do that these 2 simple things with Photoshop scripting
CS6

JJMack wrote:
Something like var doc = app.documents.add(width, height, res);
When you write Apply a layer what do you mean Script will select layer by name. A new document will have a background layer or a normal layer do you want to rename that there is onle one layer. Or do you want to add a layer by name what kind?
thanks for answer. you know like background layer. for example when you are generating web buttons you are preparing background layers. it will select a layer like that.
also can you post full script here if possible ? thank you.
example : http://img12.imageshack.us/img12/844/examplepx.png
after this i will write a text on that canvas but i will ask that after learnt this 2 steps

Moving Objects from Layer to Layer

Yes I knwo this is probably a very naive question but I'm
learning Flash 8 here and it says nothing in the documentation
about moving an object from one to layer to another. I'm sure in
Flash 5 you selected the object and then simply clicked the layer
which you wanted it on. This seems to have changed and Adobe/MM
have forgotten to say how you do it now.

When you say "move" an object from layer to layer - you
simply want to cut the object on the stage
in one layer and paste it in place on another? You will have
to manually cut and paste it. Flash 5
or any previous version never had an "auto-move" feature,
esprcially the way you describe: "...you
selected the object and then simply clicked the layer which
you wanted it on..."
That type of functionality would be disasterous - if any
object on stage was selected and then you
clicked on a layer would force that object to move to that
layer, would cause major headaches and
render the program unusable - because 99% of the time, anyone
who was not wanting to move the object
would have a very hard time keeping them on the intended
layer while tying to use other features in
flash (like renaming layers, or moving the stacking order of
layers, or creating layer folders or
motion paths or mask layers, etc...
Are you really asking about "merging" 2 layers together?
--> **Adobe Certified Expert**
--> www.mudbubble.com
--> www.keyframer.com
Sean Sykes wrote:
> Yes I knwo this is probably a very naive question but
I'm learning Flash 8 here
> and it says nothing in the documentation about moving an
object from one to
> layer to another. I'm sure in Flash 5 you selected the
object and then simply
> clicked the layer which you wanted it on. This seems to
have changed and
> Adobe/MM have forgotten to say how you do it now.
>

Rename layers with layer 1, layer 2 till and layer N

My Name is Sathya Murthy
I have psd files with many layers each with different names
I want to rename the layer which i have selected using right click with name Layer 1
Next layer which I right click with layer 2 and so on till layer N
and layers with are left out without renaming should be put in a new layer set or group in layers separately in the same file.
which i have opened
and layers should be arranged like this
till Layer N
Layer 4
Layer 3
Layer 2
Layer 1
Group or Layer Set
Background
I hope you understand what i am saying
I want scripting for that action as I have more files to rename layers so by using scripts i can work little bit faster
anyone knowing please help
Thanks In Advance
Sathya Murthy

I don’t think one can select Layers in the Layers Panel or on the Canvas while a Script is running.
One could select the Layers via a dialog, but that would take focus and need to present a list of the Layers.
Alternatively it might be possible to set up a work-around by selecting a Layer, invoking a Script (either by Keyboard Shortcut or from a Configurator Panel) that stores data (the activeLayer in this case), repeating that as often as needed and at the end of the selection process trigger another Script (or possibly the same with the shift-key pressed) that then processes that stored information.
But maybe someone else has more insightr or a better idea.

ISDN BRI layer 1 & layer 2 do not sustain "active" statuses

Hi Expert,
I have some routers which can not sustain the ISDN layer 1 & layer 2 statuses correctly. Whenever, the ISDN line is manually activated or the ISDN BRI ports are manually reset, the layer 1 & layer 2 statuses become active but they become deactivated after a while. I have changed the ISDN module and the same symptom is observed. Would you advise what is the cause and resolution. Your advice in this matter is greatly appreciated.
Thanks and Regards,
Jason Peh

Hi Rick,
Below is the show interface for BRI1/0,
router_2#sh isdn status
Global ISDN Switchtype = basic-net3
ISDN BRI1/0 interface
dsl 8, interface ISDN Switchtype = basic-net3
Layer 1 Status:
DEACTIVATED
Layer 2 Status:
TEI = 66, Ces = 1, SAPI = 0, State = TEI_ASSIGNED
Layer 3 Status:
0 Active Layer 3 Call(s)
Activated dsl 8 CCBs = 0
The Free Channel Mask: 0x80000003
router_2#sh int BRI1/0
BRI1/0 is up (spoofing), line protocol is up (spoofing)
Hardware is BRI
MTU 1500 bytes, BW 64 Kbit, DLY 20000 usec,
reliability 255/255, txload 1/255, rxload 1/255
Encapsulation PPP, loopback not set
Last input 00:04:39, output 00:04:39, output hang never
Last clearing of "show interface" counters 24w4d
Input queue: 0/75/0 (size/max/drops); Total output drops: 0
Queueing strategy: weighted fair
Output queue: 0/1000/64/0 (size/max total/threshold/drops)
Conversations 0/1/16 (active/max active/max total)
Reserved Conversations 0/0 (allocated/max allocated)
5 minute input rate 0 bits/sec, 0 packets/sec
5 minute output rate 0 bits/sec, 0 packets/sec
27807 packets input, 207167 bytes, 0 no buffer
Received 0 broadcasts, 0 runts, 0 giants, 0 throttles
0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored, 0 abort
27921 packets output, 209138 bytes, 0 underruns
0 output errors, 0 collisions, 551 interface resets
0 output buffer failures, 0 output buffers swapped out
1680 carrier transitions
router_2#sh int BRI1/0:1
BRI1/0:1 is down, line protocol is down
Hardware is BRI
MTU 1500 bytes, BW 64 Kbit, DLY 20000 usec,
reliability 255/255, txload 1/255, rxload 1/255
Encapsulation PPP, loopback not set
Keepalive set (10 sec)
LCP Closed, multilink Closed
Last input 04:59:17, output 04:59:17, output hang never
Last clearing of "show interface" counters never
Queueing strategy: fifo
Output queue 0/40, 108 drops; input queue 0/75, 1 drops
5 minute input rate 0 bits/sec, 0 packets/sec
5 minute output rate 0 bits/sec, 0 packets/sec
7434 packets input, 1689890 bytes, 0 no buffer
Received 0 broadcasts, 0 runts, 0 giants, 0 throttles
2 input errors, 0 CRC, 1 frame, 1 overrun, 0 ignored, 1 abort
10743 packets output, 782350 bytes, 0 underruns
0 output errors, 0 collisions, 0 interface resets
0 output buffer failures, 0 output buffers swapped out
4682 carrier transitions
router_2#sh int BRI1/0:2
BRI1/0:2 is down, line protocol is down
Hardware is BRI
MTU 1500 bytes, BW 64 Kbit, DLY 20000 usec,
reliability 255/255, txload 1/255, rxload 1/255
Encapsulation PPP, loopback not set
Keepalive set (10 sec)
LCP Closed, multilink Closed
Last input 04:59:22, output 04:59:22, output hang never
Last clearing of "show interface" counters never
Queueing strategy: fifo
Output queue 0/40, 3 drops; input queue 0/75, 3 drops
5 minute input rate 0 bits/sec, 0 packets/sec
5 minute output rate 0 bits/sec, 0 packets/sec
6902 packets input, 1530090 bytes, 0 no buffer
Received 0 broadcasts, 0 runts, 0 giants, 0 throttles
3 input errors, 0 CRC, 3 frame, 0 overrun, 0 ignored, 3 abort
7527 packets output, 594592 bytes, 0 underruns
0 output errors, 0 collisions, 0 interface resets
0 output buffer failures, 0 output buffers swapped out
25 carrier transitions
I have another router with the same configuration and the statuses are able to sustain correctly. Thus, I doubt that the backup interface command has any effect on the layer 1 & layer 2 statuses.
Best Regards,
Jason Peh

Layer 2 & Layer 3 Controllers in Same Mobility Group

I want to upgrade the existing Layer 2 contollers 4100 and AP 1200 (in the same subnet) to Layer 3 (controller is different subnet from AP). Due to migration in phases, I need to have mix Layer 2 and Layer 3 controllers in short period of time. Any issue if there is mixed Layer 2 and Layer 3 controller in the same mobility group. Additionally, any concern if user roaming between Layer 2 and Layer 3 controllers in the same mobility group? Thank you.

On the controller page, General, there is a option LWAPP Transparent Mode to select Layer2 or Layer 3 mode of the controller. Not sure why can't convert from L2 to L3.
Actually I had converted few L2 controllers to L3 in the same mobility group in lab. I concern if there is any problem if mix L2 and L3 controler in the same mobility group. Thanks.

Can't move objects from layer to layer

Hi all,
I have been using illustrator for years and only now happened upon this issue. When I try to move on object or text from one layer to another, I a red "Not allowed to do" symbol, to the right side, within that layer.
How can I correct this issue?
Many thanks,
NT

Gary
The objects that I am trying to move, are plane black line drawings, no fills. Every time I drag the small color box (in the layers pallet)from one layer to the next, I get the red cirle with a diagonal line through it. This symbol appears where the layer color should be. The layers are not locked. Thank you for any help you can give me.
NT

Twisting a Layer, Vector Layer and/or Text Layer?

Hello everyone,
I'm stuck and could use a hand.
Here at work, I have the entire CS5 Master Suite at my disposal.
Although I'm familiar with the Adobe Suite, I'm having a hard time figuring out the best/most efficient way to do this effect:
Now, my boss would like concept designs of our logo (let's say it reads "That One Guy") on our white mannequin,
which we use to shoot articles of clothing.
I would like to show her a design with many instances of the "That One Guy" logo twisted/wrapped (like as if I wrapped a string around my finger or curled a balloon string) atop the mannequin's head to create like an afro or long dreads look.
The layer doesn't have to have any extrusion/3D.
I mean... it CAN, but if it's just flat AND is twisting/wrapping... that's cool too.
I would like to be able to twist the layer, and then bend it so it looks like it's actually hanging off the mannequins head.
Here's an example. Not much bend on each of her strands, but you get the idea: http://www.probeauty-supply.com/images/Afro-Curl_1b-330076.jpg
What program would allow me to accomplish this best?
Photoshop? Illustrator?
Any help would be highly appreciated and would serve me well in the future =)
Thanks, everyone.
_Chris

You can do this type of manipulation in Illustrator. You have to do four things: 1) create your artwork, in this case your text "That One Guy" 2) Change your art work into a symbol 3) Create a 3D shape, say a cylinder at some angle, onto which you will map your artwork (now a symbol) and 4) hide the 3D shape.
A couple of comments: If you are new to Illustrator you probably do not want to do this as your first project. While the steps are few you have to know your way around Illustrator to get it done in a reasonable time and have it look right. Even if you managed to do it I suspect that a small number of letters wrapped around something is going to be very difficult to read/recognize. You might try sketching your idea out on paper (TO SCALE) along with the mannequin to see if the notion still feels good to you and the boss before investing a lot of time at the computer.
An alternative that you might consider that can be done in Photoshop is to create a series of curly paths ( like hair or rising smoke) and use the type on a path tool to make the text follow those paths. Here also you probably would want to use say a continuously repeating version of your logo text instead of just the three words. The work for this approach is significantly less and is easier than what you asked for and should be much more readable.
Good luck,
Paulo

When i click on one layer, the layer on top get picked instead. How do i fix this?

Hi, as the headline says, im having trouble with layers. How do i fix this? Thank you for your concern.

Sounds like the auto layer select is enabled in the top toolbar. Just uncheck the box, then you can select the layers from the layer panel or hold down the ctrl(windows) or cmd(mac) keys and select from the document. Having that option checked allows you to select from the document with needing the modifier key.

Adjustment layer causes layer to disappear

I have a bunch of 3D precomped layers which are stacked underneath some other layers. I want to add an adjustment layer above the 3d layers but when I add one its ok if its at the top but if drag it down to sit above my 3d layers they turn invisible. Not sure why. There is no effect on the adjustment layer. I can still see thir outline but the image disappears.

What Rick and Mylenium are describing is detailed here:
http://helpx.adobe.com/after-effects/using/3d-layers.html#3d_layer_interactions_render_ord er_and_collapsed_transformations

Trouble fading layer with layer mask

I'm trying to blend a photo with a background color. I select the new layer mask (selected), I select the gradient tool (color into transparent), and then draw a line to fade the image layer into the background later and it does nothing. Why isn't this working? Every tutorial I have looked at tells me to do these steps. How do I fix this??

I don't see any black on your mask. It should look something like this: Whatever is painted black on the mask will be masked on the layer, depending on the transparancy of the black.

Photoshop CS2 Create Layer from Layer Style workaround?

In newer versions of Photoshop I have created a layer from a layer style so I could edit the layer style directly . Any way to do this in CS2? Workaround or equivalent?

You can do the same thing in photoshop cs2
Layer>Layer Style>Create Layers
Or right click on the fx to the right of the layer thumbnail that has the layer style for the same options

Smart object in template: saving off each layer as a png.

I know someone must have asked for this before, however, I'm not sure how to phase it perfectly. I have provided many images to help me convey what I want, and I hope that helps. I make many mockups for smart phones and the like. Most of the time, when I present my work, my employer wants to see it "in the device".
I have a template of a phone (I grabbed an iphone just for the sake of mockups), and I load all my mockups into the smart object that makes up the phone's screen in the template. However, saving out each mockup can become very time consuming. Is there a script out there what will save out each screen once I have added all my content to the smart object? (In my example, the final result would be 3 pngs of the phone displaying one of the 3 screens)
Thanks!

It there is no perspective distortion need like iPhone example a straight on perspective. That would be a snap to do with a Photo Collage Template PSD and a batch script. The template could be as simpla as a background image of your iPhone shot straight on and an alpha channel the maps to the iPhone display. For example BatchOneImageCollage.jsx However that script would save a set of PSD files would contain a background layer. If you want a set of files the template would need two layers a plain white background layer a layer above it a cutout of your iPhone with the screen also cutout an missing., and the mapping alpha channel. The saved PSD file would the need to be processed with the Image Processor Pro script the save PNG for the PSD and include an action that deletes the background layer or turns off its visibility.
Photo Collage Toolkit UPDATED Made Rotate for Best Fit an option in PasteImageRoll.jsx Edit to customize your default settings.
Photoshop scripting is powerful and I believe this package demonstrates this.
The package includes four simple rules to follow when making Photo Collage Template PSD files so they will be compatible with my Photoshop scripts.
Documentation and Examples
There are twelve scripts in this package they provide the following functions:
TestCollageTemplate.jsx - Used to test a Photo Collage Template while you are making it with Photoshop.
CollageTemplateBuilder.jsx - Can build Templates compatible with this toolkit's scripts.
LayerToAlphaChan.jsx - Used to convert a Prototype Image Layer stack into a template document.
InteractivePopulateCollage.jsx - Used to interactively populate Any Photo Collage template. Offers most user control inserting pictures and text.
ReplaceCollageImage.jsx - use to replace a populated collage image Smart Object layer with an other image correctly resized and positioned.
ChangeTextSize.jsx - This script can be used to change Image stamps text size when the size used by the populating did not work well.
PopulateCollageTemplate.jsx - Used to Automatically populate a Photo Collage template and leave the populated copy open in Photoshop.
BatchOneImageCollage.jsx - Used to Automatically Batch Populate Collage templates that only have one image inserted. The Collage or Image may be stamped with text.
BatchMultiImageCollage.jsx - Used to Automatically Batch Populate Any Photo Collage template with images in a source image folder. Easier to use than the interactive script. Saved collages can be tweaked.
BatchPicturePackage.jsx - Used to Automatically Batch Populate Any Photo Collage template with an image in a source image folder
PasteImageRoll.jsx - Paste Images into a document to be print on roll paper.
PCTpreferences.jsx - Edit This File to Customize Collage Populating scripts default setting and add your own Layer styles.
Four Rules Templates need to follow:
Size the photo collage templates for the print size you want - width, height and print DPI resolution.
Photo collage templates must have a Photoshop background layer. The contents of this layer can be anything.
Photo collage templates must have alpha channels named "Image 1", "Image 2", ... "Image n".
Photo collage templates layers above the background layers must provide transparent areas to let the images that will be placed below them show through.
Example:

Can't do all my edits in one layer like I used to PS CS3 something happended after I synced my new iphone

Hello.
I do not know what happened but I used to be able to take a photo from Lightroom 2 and do any minor final edits in PSCS3 and do them all right there on the image that would open up. I don't need to or want to do layer upon layer for the minor changes that I am doing, ie: remove telephone wire, or gum on ground plus a little dodge and burning. Now that I have to do a new layer for each thing I need it has become a nightmare and is sucking up my editing time. How do I get PS back to where I can do this all in one shot? I view my image with Legacy and sample with all layers - oh for example if I go to clone something and it is not the new layer I get the colors of orange and grey that come up from where I use the tool. I am on Mac OSX 10.5.7 and all was working fine until I synced my new iphone with the computer.
Thanks for your help.
Julien

Sounds like a variation of this:
*[https://developer.mozilla.org/en/Mozilla_Web_Developer_FAQ#Why_aren.e2.80.99t_symbol.2fdingbat_fonts_working.3f Why aren’t symbol/dingbat fonts working? - MDC FAQ]
* http://www.google.com/webfonts?subset=latin

Layer 2 vs. Layer 3 roaming

Similar Messages

Maybe you are looking for