Layer 3 WebAuth to Layer 2 authentication

Hello,
We are planning to move from layer 3 to layer 2 802.1x security integrated with radius server. Since we are observing slowness in network so we have decided to configure layer 2 802.1x security for all staff and student accounts.
Could you please help us how to carry out this activity, we need to establish the same authentication methods as Students will be authenticated only on Student SSID and same for Staff.
What all configs are to be done on radius i will need in order for clients to supply their AD username and Password for the authentication?
I have tried it and the only way in getting to work is having client certificate installed on the client computer, but this will not be good as we are targeting BYOD clients which we cannot predicted their devices and we don't want to take the hassle of installing certificates on the client computers.
Thanks,

Hi Victor,
we have tried configuring EAP-PEAP but we are unable to get connected to that specific SSID. I am attaching Radius config snapshot , config on controller SSID and mentioned below is event viewer error. please suggest if we can do something more into it so as to avoid clients to install certificates by just using layer 2 authentication without any certificates installation
On the client side we are getting the prompt to supply the credentails and whatever we supply in any form of credentails such as domain.com\username, domain\username and FQDN [email protected] is not accepting and IAS register WARNING even as username or password is not valid.
Thanks,
User [Domain.xxxx]\maa13334 was denied access.
Fully-Qualified-User-Name = xxxx.com/DomainUsers/Students/Disabled Stud Accnt./Mohammad A Kh A Alkhadhr
NAS-IP-Address = x.x.x.x
NAS-Identifier = xxxxx
Called-Station-Identifier = 50-17-ff-34-7c-60:ICT
Calling-Station-Identifier = 00-26-5e-09-87-d7
Client-Friendly-Name = ciscowlan
Client-IP-Address = x.x.x.x
NAS-Port-Type = Wireless - IEEE 802.11
NAS-Port = 13
Proxy-Policy-Name = Use Windows authentication for all users
Authentication-Provider = Windows
Authentication-Server =
Policy-Name = ICT SSID
Authentication-Type = PEAP
EAP-Type =
Reason-Code = 16
Reason = Authentication was not successful because an unknown user name or incorrect password was used.
For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.

Similar Messages

How to capture show layer and hide layer event in photoshop through a plugin???

How to capture show layer and hide layer event in photoshop through a plugin???for mac

Use the Listener plug-in found in the SDK to see how you can monitor the show/hide layer event. You can also use the Getter plug-in to show what information you can find out about the current state of Photoshop.

[Photoshop CC 2014] Click&hold-move-release doesn't work when adding adjustment layer from the layer panel

When selecting a menu item I used to click the left mouse button and hold it down, move the pointer to the desired menu item and release the mouse button. Everything works fine in the mine menu, but there's a problem when adding new adjustment layer from the layer panel: when I release the button nothing happens, I have to press the button again. In previous PS version it worked fine. How can I fix this?

I don't think that is user fixable, meaning you'll have to wait till adobe fixes it with an update.
Photoshop cc 2014
windows does not work
mac does work
Did you already post over here:
[Photoshop CC 2014] Click&hold-move-release doesn't work when adding adjustment layer from the layer panel

Form Layer 2 to Layer 3 on Distribution and Access

Hi,
Our LAN topology have Core "L3" , Ditribution "L2" and Access "L2". We want to get rid of spanning tree by moving from layer 2 to layer 3 on Access and Distribution layers.
My questions is:
1) Any advice/document on this?
2) in the access switches did I have to configure each interface on 3750 as routed port by issueing "ip routing" and giving an IP address of each port ????. if this is the case than I will need huge amount of IP addresses.
Thanks

Hi
Much of this has already been covered off.
Just to add, I have implemented both routed access-layer and L2 access-layer and each has advantages and disadvantages.
Major advantages for L3
1) STP contained with wiring closet. Yes you can use RPVST+ but you still are extending L2 links between the distribution and access-layer with all that implies eg broadcast traffic. In addtion to utilise both uplinks at the same time requires a lot of extra configuration ie. setting root bridges for odd and even vlans and matching that to active HSRP gateways etc.
2) Automatic equal cost load-balancing (see previous point )
3) Easier troubleshooting. As previous poster said this is a matter of opinion and i have more experience with switching to be honest but i think troubleshooting L3 routing problems is generally easier than L2 STP problems.
Disadvantages
1) Vlan's cannot be extended across floors. May or may not be a problem for you.
2) If your distribution layer utilises 6500's with service modules eg the Firewall Service Module then layer 2 links give you more flexibility in deployment.
3) Cost can be an issue although your 3750's would support EIGRP stub functionality with only the base image.
As another poster pointed out, STP has come a long way from it's 50 seconds failover and with the correct setup it is nowhere near as important that you try and remove it.
I am just as much in favour of L2 access as L3 and most of major sites utilise L2 from the access-layer but with the speed/performance and cost of L3 switching you can get nowadays using L3 is a viable alternative.
HTH
Jon

Plugin crashes when I select an adjustment layer in a layer parm

If I drop my plugin on any layer and select an adjustment layer that is on top of the plugin's layer from the plugin's layer param, After Effects crashes. What gives? I'd love to paste some code here but it even happens when my plugin is doing nothing at all. I can comment out all of the render code and the plugin works UNTIL I select an adjustment layer as mentioned.
Is this a problem with After Effects or is there a way I can fix this?
Eidt: It seems native After Effects plugins also crash when I select an adjustment layer from a layer param, not just my own plugins.

Exact same thing happening to me. Are you on CS6 as well?

LAyer 3 to Layer 3 LWAPP Transport mode

Has anyone moved from layer 2 to Layer 3 transport mode?
I want to see if it is easy as changing the transport mode on the 4124 controller and assigning an IP address to the AP.
Thanks!

Pretty much it's that easy. You will also have a new interface on the controller after it reboots. The interface will be an AP-Manager. You need to assign this interface an address in the same subnet as the Management interface. After that, you will also need to either set an IP address on the AP's and specify the system name of the primary controller, or setup a DHCP scope for them, and specify the Option 43/60 so the AP can find the controller.
Here is the link to the Upgrade guide that references the option 43 information.
http://www.cisco.com/en/US/partner/products/hw/wireless/ps430/prod_technical_reference09186a00804fc3dc.html#wp125304
Also, the document is a bit lacking, it does not tell you what the VCI strings should be for all of the AP's, so here they are.
Airespace/Cisco 1200/1000
Airespace.AP1200
Cisco 1200/1230
Cisco AP c1200
Cisco 1240
Cisco AP c1240
Cisco 1130
Cisco AP c1130
Let us know if you need any more assitance.
Here is another document, that is a little more tuned towards an IOS DHCP server, and it does have the VCI for all the AP's.
http://www.cisco.com/en/US/products/ps6548/products_installation_guide_chapter09186a00807158ec.html

Drag clipping mask layer to new layer problem

Ran into something I think is a bug.
I have an object with a clipping path on Layer 1. I have a simple stroked path on Layer 2. I marquee select both items.
As usual, I can only drag one "Selected Art Indicator" layer color dot at time in the Layers palette. I drag Layer 2 color dot to Layer 3. Now if I immediately drag Layer 1 color dot to Layer 3, the object being clipped suddenly escapes its boundaries.
I have to click on Layer 1 in the Layers palette to highlight the layer. Now I can drag Layer 1 to Layer 3 and the object and clipping path move perfectly.
Is this correct behavior?

Please show some screenshots including the layer panel. Most probably you have a layer based clipping mask. They come in to flavors: object based (via the menu) and layer based (via the layer panel)

Photoshop layer move and layer duplicate event ids

I am running PSCC 2014 on a mac. I work with a wacom table and keyboard shortcuts. I work fast without looking look at the keyboard. Often end up moving layers, duplicating layers inadvertently by pressing the wrong keys.
I have identified the keyboard shortcuts responsible for the layer shift/duplication and was able to record an action.
The idea is to setup a Javascript alert when the layer moves or duplicates using the Scripts Events Manager Photoshop Event dialog.
I have not been able to successfully add the Photoshop Event using the Event ID code 'copy' and ‘move’ listed in the Adobe Photoshop CC 2014 Javascript Scripting Reference guide.
The Adobe scripting listener plugin does not record the layer movement and layer duplication events.
When I replicate the problem the History pallet registers both, the layer copy and layer move events as a ‘move’ history state.
Other than Javascript Scripting Reference guide Is there a way to find out the exact event Id for a layer move and layer duplicate events?

sorry, I wasn't aware you're using a mac. I know that in Windows, you can run additional software that will send you an alert every time you accidentally press those keys. It can even block the layer shift/duplication if you choose. I've just tried a sample here on my system and it works perfectly - every time cmd (in my case ctrl) is pressed, a tooltip at the mouse cursor will pop up, saying "CTRL is pressed". Additionally, whenever I press ctrl+option+drag, the tooltip instead says "Layer has been moved". I'm positive this can also be done on the mac.
you should look into a key remapping program for the mac that resembles AutoHotKey for Windows (which is what I'm using). It will allow you to send alerts every time you press those key/mousebutton combinations by accident. This is a solution I bet you can take care of outside of Photoshop, meaning that you won't need to rely on javascripting or anything.
Here's a webpage that gives a full list of mac software which are similar to AutoHotKey:
AutoHotkey Alternatives for Mac OS X - AlternativeTo.net
Keyboard Maestro seems to be the best bet but I wouldn't know for sure. Your solution will be in one of those programs for sure.
By the way - I tried BCM's panel and it works perfectly!

Graphics layer over video Layer problem

Hello!
we are blu-ray applications developers and we have a problem with repainting graphics layer over video layer. In MHP this problem is solved using the method call repaint() to the HScene. This Method remove all graphics and paint again. But in Blu-ray is not work correctly. When you have a graphics over video, this graphics don´t disappear when you paint other graphics, because don´t refresh the HScene and all the containers get painted over the others.
what is the solution of this problem?
Thanks a lot for your help!
Regards

Thanks for your reply.
As far as I know, targas can only be RGB. I couldn't find a way in Photoshop to work in YCbCr. I have Photoshop CS, so its pretty old, but even on my work computer, which has CS3, I didn't see anything. Next week I'll be installing CS4, so there might be something in that.
I won't be able to test anything until late tonight, but I'll try several formats to see if they make a difference. I'm wondering if there might also be some kind of option in FCE to convert imported graphics to the correct color space.
When keying graphics over video in your projects, how do you save them(formate,color space, etc)? Ever see this issue?
Thanks for your help
Colin

My CS3/PS has started to change the cursor into a line of three VERY small icons when dragged over a picture or menu. Thus it is VERY difficult for instance to drag a layer in the layer list to the wastebasket - the cursor simply is too big for the waiste

My CS3/PS has started to change the cursor into a line of three VERY small icons when dragged over a picture or menu. Thus it is VERY difficult for instance to drag a layer in the layer list to the wastebasket - the cursor simply is too big for the waistebasket icon. Even all other exact work is impossible. Of course I have checked all the cursor presets but nothing seems to help. My OS is Windows7.

Have you tried resetting Preferences?
A logical next step would be to reset your Preferences.
To reset Preferences:
If Photoshop is already open on your screen, close it (Quit). Then hold down Shift+Ctrl+Alt (Win) / Shift+Command+Option (Mac) on your keyboard and start Photoshop.
A dialog box will pop up asking if you want to delete the existing Preferences file (the "Settings"). Click Yes in the dialog box. The existing Preferences file will be scrapped and a new one will be created.

Changing SG300 from Layer 3 to Layer 2

Will changing an SG300 switch from Layer 3 to Layer 2 cause any significant user downtime, or any at all? I have two 52-port SG300's and two 20-port SG300's to make this change to.

From the admin guide p.254:
http://www.cisco.com/en/US/docs/switches/lan/csbms/sf30x_sg30x/administration_guide/78-19308-01.pdf
NOTE Switching from one system mode (layer) to another (on Sx500 devices) requires a
mandatory reboot, and the startup configuration of the device is then deleted.
So, you will want to backup you config, do this in a scheduled maintenance interval and reload the config by hand.
Also realize there may be L3 commands in your config that will not apply in L2 mode.
Good luck!

Adjustement layer on one layer

Hi,
Automatically, Adjustment Layer applies on all layers below.
How can I apply an Adjustment Layer to only one of the layer below?
EX. from bottom to top, I have Layer #1, #2 and #3. This order is important. I created an Adjustment layer on top of all. I want it to be apply on layer #3 only. I don't want Layer #1 and #2 to be affect by Adjustment layer.
How can I do it?
thanks

Hold the alt key and click between the adjustment layer and the layer beneath it. You'll see the cursor change and once you click, the adjustment layer will be clipped to the layer below.
Clipping mask is the keyword. More about them here:
http://help.adobe.com/en_US/Photoshop/11.0/WSfd1234e1c4b69f30ea53e41001031ab64-7853a.html

Edit the INITIAL values in Layer...Layer Styles...Drop Shadow dialogue box

How can I edit the values in Layer...Layer Styles...Drop Shadow dialogue box so that values that appear when I FIRST OPEN the box are the values I use commonly?
For example, once I open the dialogue box, the Blend Mode is always "Multiply" and the Angle is always "120". I always use "Normal" and "45". Is there a place where I can make my default values "Normal" and "45"?

Which version of photoshop are you using?
Newer versions of photoshop have a Make Default button at the bottom of the dialog.

How copy a layer and its layer mask to another image?

Using PSE9, how can a copy a layer and its layer mask to another image?
The on-line help contains a topic on how to copy a layer but trying the different methods in the help topic results in either nothing being copied or just the layer without its layer mask being copied. Thanks.

How are you copying? If you float your images, so they are both partially visible in the work area, make the one with the to be copied layer active. Then drag the layer from the layers palette onto the other image. Now you should have both the layer and the mask on the second image.
Juergen

OSB: The different between transportation layer and security layer

Dear All,
Do you have any idea for compare about security on service bus between transportation layer and message layer?
Which one is better? And do you have any factor to consider which one I should use?
Best REgards,

If you are working with OSB 11g, please refer -
http://download.oracle.com/docs/cd/E17904_01/doc.1111/e15866/part_sg.htm#sthref1029
Ofcourse you would like to have both of them if you want a healthy system. If your OSB services are internet facing then it is a sensible decision to have both transport (a bare minimum) & message security. If your services are exposed to a LAN/WAN then you may have either or both of them. Remember, securitiy processing is always an overhaed to the performance so should be used as and when required only.
Regards,
Anuj

Layer 3 WebAuth to Layer 2 authentication

Similar Messages

Maybe you are looking for