Layer Layer Styles Create Layers

Hello:
I am using this function for the first time and I am wondering about a dialog that pops up and says:
"Some aspects of Effects cannot be reproduced with layers"
I've tried the manual for what this means but thus far I haven't found an answer.
Just wondering what exactly this means.

Thank you so much for your time. I wasn't able to find any info about it either but I'm not so good at keywords yet. So, i just thought I'd ask someone else.
I guess I got lucky b/c both of the LS's i used were put on new layers.
Drop Shadow & Gradient Overlay

Similar Messages

Photoshop CS2 Create Layer from Layer Style workaround?

In newer versions of Photoshop I have created a layer from a layer style so I could edit the layer style directly . Any way to do this in CS2? Workaround or equivalent?

You can do the same thing in photoshop cs2
Layer>Layer Style>Create Layers
Or right click on the fx to the right of the layer thumbnail that has the layer style for the same options

Issues with merging layers with layer styles

Just downloaded CS6 Photoshop off the creative cloud and the merge layer command does not work. What is happening is there is one layer with a layer style then a shape layer and when I hit Cmd E it merges the layers but the layer style will not merge with it. I was chatting it up and everything they recommended did not work. It works on all my other co-workers computers and we are all on the cloud. I tried renaming pref. folder, settings folder, re-installing, holding down shft+option+cmd on start up. I also created a test account but that turned out to be a major inconvenience. Once logged into the account there is nothing there. The suggestions just started getting more ridiculous as chat proceeded. Nothing.
Has anyone experienced this issue?
Does anyone have a solution where I don't have to create a whole new admin account just to see if CS6 Photoshop works correctly?
P.S.
Adobe customer portal is about worthless.

Get Rich or Die Tryin wrote:
Just downloaded CS6 Photoshop off the creative cloud and the merge layer command does not work. What is happening is there is one layer with a layer style then a shape layer and when I hit Cmd E it merges the layers but the layer style will not merge with it. I was chatting it up and everything they recommended did not work. It works on all my other co-workers computers and we are all on the cloud. I tried renaming pref. folder, settings folder, re-installing, holding down shft+option+cmd on start up. I also created a test account but that turned out to be a major inconvenience. Once logged into the account there is nothing there. The suggestions just started getting more ridiculous as chat proceeded. Nothing.
There are two merge layers type commands one is merge down involves only two layers and another that is merge visible layers. In my opinion there is a problem with the way merge down is implemented. When you use merge down if the bottom layer in the merge down has a layer style the merged layer also has this layer style attached. This means that pixels from the layer merged into it will be effected by this layer style. The result may well not look like the composite looked before the merge. The will also happen in CS5. Merge visibile layer works the correct way in my view as the merge progresses the top two layers are merge by applying any layer masks and layer styles first and merging the two layers the resulting layer has no layer masks and no layer style. This result is then merged with the next lower layer with its masks and style applied first. The result is a single layer without mask and style that looks like the original composite view. If your having the problem with CMD|CTRL+E and the result has a layer style try turning the layer style visibility off see if that helps. If it helps some backup to before the merge down use merge visible or first rasterzise the bottom layer to be merged.

How do I create layers in an adjustment layer and transfer those layers?

How do I create layers in an adjustment layer and transfer or duplicate those layers in another image ?
I need to transfer the same colour readjustment from one image to several other images ... I have been told to do this in the adjustment layer platform how ever I cannot drag or copy those layers over to the other images I have open and in need of adjustment to the same layers ...
Images shows my lay out and what i've done this far.
Thank you

You need to get out of single image view. Go to the editor preferences>general>Allow Floating Windows, then go to Window>Images>Float all in Window, then Tile or Cascade. Then you should be able to drag the layers from the layers panel for one image into the main image window (not the panel) for another image.

How can I merge layers with multiple layer styles added to them?

So I have this issue where I have to merge lots of layers in order to finish the job. Thing is that two of them have layer styles added to them. Each one has two different layers styles added to it. If I try to merge the layers, the effect won't stay the same and only one layer style will apply (and not even this one works correctly). Is there any cure for this? Thank you!

Here is how it looks before I merge the layers.
And here is how it looks after I merge the layers.
Why won't it stay the same?

How do I create layer styles in CS3 to use in elements?

Hi,
sorry if this is a very broad question, I am new to CS3. I usually use elements.
I really want to create lots of different layer styles that I can save and use in Elements.
Can someone tell me, or direct me to a good tutorial for making new layer styles in photoshop.
Also is it easy to save the new style so I can load to elements?
I appreciate any help with my question,
Thanks so much!!

This is not the "PSE" forum.
You want the Ps Elements forum across the hall:
http://forums.adobe.com/community/photoshop_elements

I just downloaded photoshop elements - have opened an existing pdf drawing - 1) I am trying to create layers; however, the option is not available? (i.e. greyed out rather than black) from the drop down menu - "layer" - "create new"? what do i do

i just downloaded photoshop elements - have opened an existing pdf drawing - 1) I am trying to create layers; however, the option is not available? (i.e. greyed out rather than black) from the drop down menu - "layer" - "create new"? what do i do

You'd better ask here:
https://forums.adobe.com/community/photoshop_elements

Any way to have an AE layer style applied to a comp NOT effect certain layers inside said comp?

OK... here's my issue.
I have a character AND a cheeseburger made in Photoshop that I then import into AE (two separate .psd files). So I have two compositions in AE... the burger .psd file and the puppet "Burgerman" .psd.
Burgerman needs to hold the cheeseburger, so I have to nest the burger comp WITHIN the "Burgerman" comp so that his hand will go IN FRONT of the cheeseburger. See image:
The problem is... I have a layer style applied to the "Burgerman" composition. It's an Inner Shaodw and it gives the character the pink hue you see outlining him. THE PROBLEM is though... the layer style effects the burger composition because it is nested within the Burgerman comp. As you can see... the burger turns very red, which I do not want.
Is there some way to say.. "DO NOT APPLY the layer style to the burger comp nested within the Burgerman comp"?
running CS5 on Mac OS X 10.7.

Help anyone? I feel like it must be pretty simple and it's something I'm overlooking as a new user.
Here's as short as an explanation for where I'm at....
My master comp is called "Comp1." In this comp, there is one comp called "Puppet Combined." When you double click "Puppet Combined," it takes you to a comp with my original animation, "Puppet," and its duplicate comp "Puppet Duplicate." "Puppet Duplicate" sits on top and is merely the inner shadow (set by making the Fill Opacity to 0%). I created the duplicate by selecting my original animation, "Puppet," and hitting CMD+D to duplicate it. I can tell everything is in order as advised by Mylenium, because if I hide the comp "Puppet," I can see that "Puppet Duplicate" is just the inner shadow.
At this point though... I'm not sure how to handle the comp "Burger" which is the actual cheeseburger. How do I go about adding the "Burger" comp back into my project where it will retain it's original coloring and not be affected by the inner shadow? As I stated above, if I add it back into the comp "Puppet," it also adds it into "Puppet Duplicate," which I don't want as it then applies the inner shadow.

A bug? Layer styles change or dissappear when you flatten/merge layers.

Does anyone else experience this problem in CS3?
An example for me would be,
right now I have an outer glow with noise applied to something but when I flatten the few layers I have in the file, the noise simply disappears or the glow becomes faded. With other layer styles, there might be a change, too, but usually the effect just weakens in color when i flatten the layers.
any advice would be much appreciated, thanks.

I either used too many words or too few, but I'm not really sure.
The specific layer style combo and layer merge I am talking about is simpler than you might imagine..(see the pictures I posted of the results of the merge.)
Yellow outer glow at full opacity with 100% noise, merged down with a single layer. (and that single layer does not have anything other than a fill in it)
When i merge the two, (both blending modes are set to normal) the noise then disappears and the glow fades. It really does not have anything to do with how close or far away the "view" is.
Trust me, I tried it.
I even used a microscope and a telescope..
It doesn't change anything.
In other words, the layer styles always look okay regardless of how they are viewed, UNTIL you flatten or merge them.
So to finally answer Buko's question, the answer is no.
And I did actually take into consideration what D.Katz said about possible interference with the appearance.. view needing to be at 100 to even judge what's going on.
The problem I am experiencing only occurs the minute one layer combines with another layer that has a layer style(s).
If you compare the two images I posted, you will see that there is a very large loss in quality rendering the layer style not even worth using in the first place.

Layer Style/Blending options applying to all layers ie.. drop shadow angles

I am having a problem in CS6 Photoshop where I never experienced this in CS3-5.
I am designing a website and when I apply a drop shadow or inner shadow to a layer through layer style/blending options in the layers tab. It applys the same angle etc.. to all the other layers I have done styles too...
I will have 5 + layers done with styles and I will make a new layer and give it a shape, open up blending options and when I do a drop shadow and change the angle I literally can see everything on my layout change angles also when I move it around for just ONE layers style... What on earth is going on? This makes it impossible to make unique designs unless I keep flattening my PSD and transfering stuff over which destroys workflow.

Thank you for the reply's. I actually was able to figure it out shortly after making this thread.
@Noel Carboni: I needed to change the direction of the light for an inner shadow on a set of arrows for a slider. If they were the same angle it would look horrific.

Filter Effect and Layer Style in the same layer vs separate layers

I'm adjusting a photographic image and am using both a filter effect and a layer style in the same layer on a Smart Object. I want to separate the two effects into two layers, so one layer has the filter effect (Nik) and one layer has the layer style (Color Overlay) (with the goal of merging/rasterizing the Nik filter effect with the Smart Object but keeping the layer style unmerged). I can make two layers and move one effect without problem, but the visual result of each effect on a separate layer is quite different from having both effects in the same layer. The Blend Mode for all my layers is Normal. Within the Color Overlay panel, the blend mode is Linear Burn.
I don't understand why the visual result is different. I'm not an advanced user of Photoshop, so maybe I'm missing something. This is a trial of CS6 that I'm using.
Layer 1: a layer style and a filter effect, stacked
looks very different from....
Layer 2: a layer style
Layer 1: a filter effect

If you want two separate layers, then on the duplicate layer with the Color Overlay layer style you might try different layer blending modes.
For example, below looks the same having the Color Overlay with linear burn on the second layer and changing the layers blend mode to Hue.
You could also put the layer in a group and apply the layer style to the group.
(i deleted the previous post because of pilot error)
Message was edited by: R_Kelly

Layer style affected on all layers

Hello Everybody,
I have 5 layers with similar and different layer styles applied in my psd file (PS CS5). The problem is when I make changes to the styles on one layer, the affect is applied to all the layers simultaneuosly. Why is this happening? Is there any option to turn this off? I need to apply style changes to only a particular layer without affecting other layers. Please HELP.
Thanks
Shiva

Is it the angle of the light that's changing on all the layers? If so, then it's likely you've got the [ ] Use Global Light setting checked. That setting is supposed to tie the light angle together on all the layers so that changes will be coordinated.
If this is not the issue, you may want to do some screen grabs and post them here to show what you're seeing, your layers panel, and the specific layer effects you're seeing the changes in. That will give the folks here more information with which to answer your question accurately.
-Noel

Cannot choose layers w/o going to layer style menu

I'm on CS3, on a network. Over the weekend the network admin put through updates to several programs, none of those were Adobe. However, in photoshop, now I can't select a layer by clicking on it. I have to double-click, which opens the layer styles menu, click OK or cancel to close the menu, then the layer will be selected. This isn't happening anywhere else. Illustrator gives me error messages when trying to apply a layer effect, but I don't know when that started, it may not have anything to do with the current network updates. Any ideas, especially for the PS problem? That's quite annoying to deal with.
Thanks!!!

Hi
thanks for the response. I've always done that, that's what was so puzzling.
We finally figured it out - what happened was the couple of files that were
open when IT started the update were the only ones with the problem. They
were corrupted when a force quit was initiated ... or at least that's what
we think.

Photoshop CS2 Layer Styles / Blending Options stopped working

I'm running Photoshop CS2 on PC. When right clicking on layers to bring up the Layer Styles / Blending Options palette, I can get the palette okay but the selections won't work when I check the boxes.
I try to select different options....drop shadow, inner shadow, etc. but nothing shows up. It's not a preview problem because the changes are not visible in my image even after I select OK.
I've reset my preferences (alt+ctl+shift) but it didn't help.
Can anyone suggest to me what I can do to wake up this palette?? I've got work pending and my online searches have left me empty handed.
Thanks in advance for any suggestions!
Lisa

Thank you both for your responses.
John: The file is PSD, RGB mode, 300dpi. Last night, I tried the layer styles in another file and it wouldn't' work.... another NEW file. Today, I opened an existing file that had layers styles already in effect and I can see them, I can click them on/off AND I can put layer styles onto other layers in the existing files that did not have them previously. I just tried creating a new file and, of course, the layer styles now work in the NEW file.... this is something I tried last night and it didn't work at that time.
Ed: Yes, I'm on the right layer. I've tried it on several layers, none of which are transparent. Thanks for the heads up.
So, this tells me it's something to do with this particular image file. I must've accidentally hit something that's put it into a strange mode. Last night, out of frustration, I just gave up, shut it all down, and turned the computer off. This morning, I went in and created a new image document and then one by one I copied and pasted the layers of my malfunctioning image into the new one. Now I can get the layers to work.
I have no idea what was wrong, but it seems I should just trash the problematic file and start fresh. At least the individual layers were not compressed and it's still salvagable.
Thank you both for your time and consideration!
Lisa

Layer Styles don't work with one file

I'm using CS2 for Win. I've got an important file that will not accept layer styles. The layers appear to be "styled" on the layer stack, but nothing previews or shows up on the actual layer. I've created new layers; they don't take styles either. Other files in the system - including new ones - work okay; it's just this one that has the problem.
It could be contaminated; I accidentally saved it as a PDF with layers, and then back to a TIF. It's an 8-bit file; I've tried saving it as a PSD. Same problem.
Is there a way to rescue this thing? I have to get it to a client tomorrow. Many thanks to anyone who can help!

I've been having this happen in Photoshop Elements 2.0. Looks like a bug. But it might be me not knowing what I'm doing.
However, one fix that just worked for me was to use Image -> Duplicate Image. Drop shadow worked in the duplicated image even though it would not work in the orginal. Nothing I've tried doing to the orginal (save and open again, turn layers on and off, chagne order, duplicate layers and delete the "broken" ones, etc) seemed to allow the layer effectrs to work for me once it stopped working.
This "bug" happened to me after messing around with the background layer - deleting and recreating it as a solid color. Looks like the software is getting confused about where to image the drop shadow. Maybe it is getting confused about the order of the layers or something? If you turn the preview OFF you can see small changes as you adjust the paramaters in the effect.
Curt Welch
[email protected]

Layer Layer Styles Create Layers

Similar Messages

Maybe you are looking for