Layer position resets when creating animations

I'm creating an animated gif from a video clip (cinemagraph). In order to acheive the effect I need, I need to move each layer with the move tool to get an object to stay in the same position. I have gone through layer by layer and used the move tool to move the contents of each layer. When I play the animation I see the layers in the position I put them in. As soon as I stop playing the animation the contents of each layer snap back to their original positions. I have tried using the lock tools (both lock position and lock all) but they don't make a difference. Can anyone tell me why layer positions would reset when creating animations and how to get it to stop?
Thanks for any help.
Eric

It seems from your answer that you're thinking I'm just moving one frame and expecting the rest of them to move automatically (but I'm not sure if that's what you are saying). I have gone through and moved each frame individually and then locked each frame's position individually. When I play the animation and then stop it the layers move back to their original positions.
I'm also not sure if you're thinking I'm expecting that when I move one image off the layer it will affect the next layer. That's not what I'm expecting. I'm just repositioning the image on each layer to get a particular object to stay in one place (the camera was moving while shooting), so I'm dealin gwith each layer individually.
Thanks

Similar Messages

BUG - layer position moves when switching frames in timeline

When creating a new layer and positioning it in the active frame, the position is sometimes wrong when returning to that frame.
1. create multiple frames in the timeline
2. create a layer and position it somewhere in the image
3. view another frame
4. return to the original frame and the position has changed
Positioning the layer again seems to work, it doesn't move by itself when moving between frames, but remains in position.

Same as your otehr post: Screenshots!
Mylenium

Security Network Layer (SNC) error when creating new session

in SAPGUI 710, suddenly some users are getting a popup message ("Security Network Layer SNC error") when they use the Create New Session toolbar button.
SSO works fine when they connect from SAP Logon, its only when attempting to open secondary sessions. Also, its only some users.
Where would I find log information resulting from the error? Or any suggestions on steps to troubleshoot?
Thanks!

Hello Erik,
Issue actually belongs to BC-SEC-SNC, not SAPGUI.
The attached note advises how to run a trace to get more information about the issue
150104 collecting dev_trace of user session via SM04
If you recreate the issue again with the active trace, you might have more sucess with a reply.
Just to advise that 7.10 is out of support and 7.20 should be used as soon as possible.
Kind Regards,
Jude

Change production order position (AFPO) when creating

Hi gurus!
I'm looking for a Customer function or BADI that allow me to change data in AFPO structure when creating a Prod.order.
I tryed EXIT_SAPLCOBT_001 but i cannot modify data, i also looked at badi WORKORDER_UPDATE but it got all IMPORTING parameters so changes are not taken.
Any hint?

Hi Manish,
We use alternative PP BOMs. The description of the FERT material master carries the description of the alternate BOMs combined. When any one of the BOM is selected while creation of production order the order header description carries the material master description which is a combination of the alternative BOMs. We need this to be editable so that the correct description corresponding to the relevant alternate BOM can be maintained.

Language German Position Appear When Create New position (PO13)

Dear Experts,
I have very odds problem. When I create new position through PO13, pop-up message appear "previous record will be delimited at end. Do you want to save". For example I want to create new position 'Engineer ' starting 01 Feb 2011 through PO13.After I select new button , pop-up message with this record appear.If I choose yes, position with german language appear; for example 'entwickler' and validity period 30.11.1995 to 31.01.2012 with language key German.So this position have 2 object
1) DE 30.11.1995 31.01.2012 entwickler
2) EN 01.02.2012 31.12.9999 engineer
Every time I create new position seem I copy position from german language. How to avoid this error

Hi
Can i take clarity here
a) Are you working in the IDES system to create the position ? if yes, there is every possibility of such a thing happening as ther are few standard entries in the SAP IDES system.
If you are not working on the IDES system please excuse me for having picked to reply for your query.
All the best to you
Regards
RR

Navigation layer positioning shifting when used as component

Hello, really hoping someone can help me figure out what I'm doing wrong. I have a site with a drop down nav that I made using layers. After having the client change the nav a few times I realized what a pain it is to update each page on the site with the pages, so I decided to try to make a separate file for the nave and place it as a component into each page so I could update just one page and see the changes across the whole site.
The problem is that the nav file I made looks correct on it's own, but when I place it the positioning shifts to the left and doesn't line up with the page anymore. The positioning seems to be fixed when the page size changes (not sure what that's called). Anyway I can make this work?
The nav page is here: http://bostonsruntoremember.com/boston/_brtr_navlayers2.html
And a sample page with the nav placed as a component is here: http://bostonsruntoremember.com/boston/_autonav_test.html
Unfortunately I was suppose to make a bunch of changes last week but have wasted a bunch of time trying to figure this out.

Hi,
Here is my graphical solution for your problem. Underneath is the explanation:
DC_A
+DC Usage: refs DCB.PP_B
+WDCompA
   +Controller
   +Component Interface
     +Interface Views
       +MyWindowAInterfaceView
   + Component Usages
     +WDCompA (Component Usage)
   +Views
     +MyViewA
   +Windows
     +MyWindowA
       +MyViewA (View Usage)
         +InboundPlugA <-----------------+
       +WDCompB.MyWindowBInterfaceView   |
         +OutboundPlugB -----------------+
DC_B
Public Part:PP_B
             + contains WDCompB
+WDCompB
   +Controller
   +Component Interface
     +Interface Views
       +MyWindowBInterfaceView
         +OutboundPlugB
   +Views
     +MyViewB
   +Windows
     +MyWindowB
       +MyViewB (View Usage)
can you add a view to a public part? The only way how you can embed a view from a different DC is through a window of the WD component (we are not talking about DC now). A window is the visible part of a Web Dynpro component. It is represented by the so-called Interface view locatated in the WD explorer under
Project->Component->Component Interface->Interface Views.
Each Interface view has a window (Project->Component->Windows) with the same name in which you can embed the view you want to expose. The Interface view also can have in- and outbound plugs.
Lets say WD A has Component usage to WD B. You can navigate from a view in WD A to the Interface View of WD B. This interface view can also have a outbound plug.
Because all this stuff is visual it is a bit awkward to explain. Maybe this helps already otherwise I will provide more information.
rgds
David

BUSINESS LAYER VIEW DISAPPEAR WHEN CREATED

I've created a new Business Layer View but it doesn't exist

Hi....
Same problem I'm facing also, All Business Layer, Data Foundation & Connection folder is disappear,
these folders & files is available in workspace folder but not showing in IDT Local Project Window
I tried to find out on internet but I did not get any reference, even uninstalled Business Object & install in my PC, still same problem,
we are using Business Object 4.1 (Client/Server) both side
Operating System Client : Windows 7
please see attached file
if anyone knows solution please share it, my all work stopped
Regards
Ali

Help!!! - When Creating Customer I get this ERROR "Provide a positive integer for minimum customer balance amount or percent when balance amount overdue type is amount or percent respectively."

When Creating Customer I get this ERROR "Provide a positive integer for minimum customer balance amount or percent when balance amount overdue type is amount or percent respectively."
I tried troubleshooting when I saw the another post and created with a new customer profile class, but still getting an error, though I created another profile like below and attached this to another existing customer it worked, but when I tried creating a new customer it is still giving me the error. I am Using Oracle Applications R12.1.1
Steps I followed in Creating a New customer Profile
==== Make sure the new Customer Profile class which you will create is in active state. Cross check below steps while defining a customer Profile class.. e.g. Name : DEFAULT (and it's active)
*1) Profile Class Tab :*
a) Balance FWD Billing : Not enabled
b) Invoicing --> Tax Printing ( Summarize By Tax Name), Grouping Rule (DEFAULT)
c) Set Terms as per ur requirement , do allow discount & Override terms
d) Set Dunning as per your requirement,
e) Filled in Collectors info as per your requirement with Credit Check enabled...
f) Receipt --> Auto cash Rule set as 'Standard'..
*2) Late Charge Profile* Set it as per requirement
*3) Profile Class Amounts* e.g Say Currency set as "USD"
a) Credit Limit : 100000
b) Order Credit Limit : 100000
c) Minimum Receipt Amount : 1.00
d) Min statement amount : 1.00
e) don't put any value in Exchange Rate type (e.g, monthly, Plan etc..)
f) Minimum Customer Balance : Amount ------> Value: 5.00
g) Minimum Invoice Balance : Amount ------> Value: 5.00
h) Minimum Charge per invoice : 1, Maximum Charge per Invoice : 100 Under Interest Charge
i) mention Type as Fixed Rate, Value : 10
j) You can avoid setting the Penalty Charge for the time being..
Step-2_ a) Open a customer ..*go to Bill to site details* --> Click on Profile Tab --> Under Profile Class field please include new profile class which is created by you (e.g DEFAULT) . b) Go to Profile Amounts Tab --> Click(Show) on Currency USD --> Verify the set up here as well I could see this.
When I tried creating an new Customer using the new profile, it's repeating the same error. Please help.

Hi
You get this error when profile class amounts are not set for all the currency. Go back to your profile and ensure that the profile amounts are set for all the currencies found, whether you are using it or not.
Regards

Mandatory Organizational unit when creating a position

Hi,
I would like to know if it is possible to make mandatory to create a relationship with a organizational unit when somebody creates a position using transaction PO13, or any other transaction.
Thanks a lot,
Mforman

Hi Mforman,
You can define the A003 Org unit relationship to position an "Essential relationship" and make it the next screen to be filled when creating a position (Table t77so). This, however, does not make the respective relationship a mandatory one as one can skip this relationship creation screen.
Regards,
Dilek
Edited by: Dilek Ersoz Adak on Apr 1, 2010 7:52 AM

Invalid SRS when create a map tile layer

Hi,
When i created a map tile layer and submit , it shows “Error creating a new map tile layer: Invalid SRS(spatial referencing system). This might be caused by invalid SRID or no database connection being available to retrieve SRS information.”
And I can't view the map tile which I've created before, it alerts "Cannot get map cache instance config information for MVDEMO.DEMO_MAP. Server response: {1}.
Thanks for any assistance.
a-Li

Are you trying to create a new map tile layer for the MVDEMO sample data set? If that's what you are trying to do, then may I suggest you re-download the latest MapViewer kit (10.1.3.3 for WebLogic, works on any 10g OracleAS and standalone OC4J as well), it includes a refreshed MVDEMO data set, and the best part is it already has the MVDEMO.DEMO_MAP map tile layer created for you (if you follow all the instructions come with the demo data set).
If you still want to create a new map tile layer, then can you please post the exact parameters you entered when creating the new tile layer? Since the MVDEMO data set has a built-in SRID of 8307 (if I remember correctly), you can always use the same SRID (8307) for your tile layer.
thanks

Layer mask occasionally does not have link when created

when addidng a layer mask sometimes it does not have link when created which can get annoying when you dont realize it and you start moving groups.
its happened a few times already.

hi, most of my psds have tons of layers and i create the masks in a variety of ways, such as clciking on the mask icon or alt clicking when i have a selection going, i didnt notice anything until i started moving groups and things started getting messed up. today im going to pay attention every time i make a mask to see if there was a specific task tthat is causing it.

IDVD just disappears (in the encoding phase) when creating a DVD

I have this problem on different themes and can occur when creating single as well as dual layer disks.
iDVD suddenly disappears and disk utility pops up (presumably because the blank DVD is now available to the OS).
I checked the console - though it's fairly meaningless to me - and found the following:
errors over and over
Jul 23 15:00:00 iMac [0x0-0x10d10d].com.apple.iDVD[2801]: 2010-07-23 15:00 iDVD[2801] (CarbonCore.framework) FSEventStreamCreate: watch_path: error trying to add kqueue for fd 143 (/Volumes/MEDIA/Lara Uniting Church/VIDEOLUC_HERSERV_2004/LUC_HERSERV2004; Operation not supported)
Jul 23 15:00:00 iMac [0x0-0x10d10d].com.apple.iDVD[2801]: 2010-07-23 15:00 iDVD[2801] (CarbonCore.framework) FSEventStreamCreate: watchallparents: error trying to add kqueue for fd 144 (/Volumes/MEDIA/Lara Uniting Church/VIDEOLUC_HERSERV2004; Operation not supported)
Jul 23 15:00:00 iMac [0x0-0x10d10d].com.apple.iDVD[2801]: 2010-07-23 15:00 iDVD[2801] (CarbonCore.framework) FSEventStreamCreate: watchallparents: error trying to add kqueue for fd 146 (/Volumes/MEDIA/Lara Uniting Church; Operation not supported)
Jul 23 15:00:00 iMac [0x0-0x10d10d].com.apple.iDVD[2801]: 2010-07-23 15:00 iDVD[2801] (CarbonCore.framework) FSEventStreamCreate: watchallparents: error trying to add kqueue for fd 148 (/Volumes/MEDIA; Operation not supported)
Please, what is going on and can I fix it somehow? It's no joke when this happens especially when you are on a deadline to produce the DVD.

Greetings,
Did you try my suggestions including the caches and plists?
When burning from iDVD, make sure Disk Utility is not open. Having two program running that access the DVD burner at the same time might add complexity to the issue.
Can ANYONE at APPLE confirm that this will NOT happen if I upgrade to iLIFE 09?????
As stated in the Terms of Use we all agreed to when signing up for the Discussions, this is a user forum for users to talk to users. To contact Apple: www.apple.com/contact
As the issue you described is not a known issue in any version of iDVD ever, it is not something that was "fixed" in any new release. However, reinstalling all the core components (like installing a new version or just reinstalling period) can resolve issues with the Application itself. If the issue is with the OS then reinstalling the iDVD Application (which didn't change much from '08 to '09) will not make much of a difference.
Try reinstalling iDVD: http://support.apple.com/kb/TS3249
I would also suggest reseting the hardware of the computer itself:
http://support.apple.com/kb/HT1379, http://support.apple.com/kb/HT3964

IPhone strange reset when in e-mail client

Since the update for the iPhone 2 weeks ago, the iPhone has a strage reset when I am deleting or sending e-mail. The screen goes black, and within 10 seconds or so it goes to Home. When I go back into mail, all the e-mails I deleted reappear, while e-mails I was in the process of composing or sending have to be re-typed.
Additionally, there seems to be a bit more lag on various applications. Any ideas?

Mr. Hughes,
Here is a quote from Mail Help under Fonts:
"Helvetica Fractions font may cause text to display improperly in Address Book, iChat, Safari, Mail
If you have the Helvetica Fractions font installed, text in some applications (including Address Book, iChat, Safari and Mail) may appear as overlapping numbers and symbols.
To avoid this issue in Mac OS X 10.3 and later, use Font Book to turn off the Helvetica Fractions font.
If you're using Mac OS X 10.2.8 or earlier, check these two font locations for the Helvetica Fractions font:
• /Library/Fonts/
• ~/Library/Fonts/ (the tilde represents your Home folder)
If you find a Helvetica Fractions font (or fonts), which may appear as "HelveFra" or "HelveFraBold," remove it from the folders. (To avoid other issues, do not disable the Helvetica font.)
Article ID: 301245 Date Created: 2005-06-21 Date Modified: 2005-06-24"
iMac 1.9 GHz PowerPC G5 1.5 GB DDR2 SDRAM Mac OS X (10.4.6) Slot Loading 8X Dual Layer SuperDrive, iSight & Apple Remote; iPod Video

Creating animations from jpegs

I need to create animations fron a set of jpegs. I can layer selections in photoshop; create symbols in Flash, although When I open a multi-layer psd in FL, don't always get multi-layers in FL. More importantly, what graphic/symbol formats are required for the typical animation techniques (eg, different tweens, bones, puppet). Can't seem to find this info anywhere. Any help greatly appreciated. Thanks. Ron

with classic tweening, use vectors. to convert a bitmap to a vector in flash, select it, click modify, bitmap, trace bitmap. with motion tweening convert your bitmaps to movieclips (right click, click convert, convert to movieclip).

Problem with Buttons/Form Fields in Acrobat PDF when created in InDesign CS4

So I have been working for quite some time on an interactive form for an internal client at my job. It has two major components, one is the side bar navigation, which I created using buttons in InDesign which link to bookmarks in the document. The second aspect is that I also created "check boxes" accoring to this video: http://www.adobe.com/designcenter/cs4/articles/lrvid4434_ds.html
I have two major issues:
1. Whenever I try to convert my boxes to form fields in Acrobat it will not recognize them unless I save out 4 pages at a time (rather than the whole document).
2. I then have to combine the document and get multiple sets of bookmarks, and some bookamrks are corrupted (not working properly). Even when I try to convert the whole document some of the buttons are corrupted.
UGH tired of this project, I am really bastardizing the whole thing to get it done, but want to figure out the problem as this is an ongoing document that we will be using over and over again in future years.
I am attaching the pdf file--this is a pieced together one (saved out 4 pages at a time) (which I did do some fixes to to get buttons to go to proper locations) and the original indesign file (partial file due to size).
PLEASE OH PLEASE HELP ME!

Acrobat's Form Wizard is good but not perfect when creating form data from a PDF. I have never encountered Acrobat not able to finish the process of creating all form fields, but have encountered very slugish performance afterwards when there was a lot of forms, buttons, and other elements within the pages. And I would say, from your attached PDF, it is pretty heavy with content. I am going to suggest an idea, but I have not tested this to see if it would work.
In InDesign, create a layer for your navigation tabs, and a layer for your text with the check boxes. Create two PDFs from ID, one PDF with just your-nav tabs, the second with just your text with check boxes. In Acrobat, perform the Form Wizard on the second PDF and see if this will finish, the idea here is to reduce the cllutter for the Form Wizard to finish. If it does, you can merge the first PDF as a layer with the second to have a completed document. Again, I have not tested this theory.

Layer position resets when creating animations

Similar Messages

Maybe you are looking for