Layers not printing

Hello,
I have a document set up with multiple layer that also have multiple objects on the layers.  I DO have each layer set to print.  But for some reason only my lowest base image of every layer is printing.  The copy and content I have laying on it does not.  When I preview in normal mode, everything is there.  When I preview in preview mode, it is removed.  I really appreciate any help.
Thank you,
Melanie

Hello,
I looked and that is not the case.  Any other suggestions?
Thanks,
Melanie

Similar Messages

  • Layers not Printing in Acrobat 7 Windows

    Hi, I'm hoping someone can help me with an issue I'm having printing layered acrobat files.  Many of my layers are not printing for some reason.  This only happens on page 1 of a two page pdf.  This is happening on Acrobat 7 pro on both Windows XP and Windows 7.  It happens on several computers but for some strange reason it behaves on a third computer.
    Thanks in advance, Stephen

    Your problem is related to the fact that your using a post script printer
    .  Non PS printers don't have the problem.  Try printing as an image.
      It works sometimes.

  • Acrobat 7 Pro not Printing Some Layers

    Hi, I'm hoping someone can help me with an issue I'm having printing layered acrobat files.  Many of my layers are not printing for some reason.  This only happens on page 1 of a two page pdf.  This is happening on Acrobat 7 pro on both Windows XP and Windows 7.  It happens on several computers but for some strange reason it behaves on a third computer.
    Thanks in advance, Stephen

    That's a guaranteed sign of a conflict between the Print Driver for your Printer and the Version of Acrobat you have.
    First upgrade to the very latest version of Acrobat you can for the version you have.
    Then go to to Printer website and the the very latest Driver they have.
    I'll will almost bet a wooden nickel that you have a Hewlett-Packard Printer.
    Adobe and Hewlett-Packard have had a known for years love/hate, yin/yang relationship. Every time Adobe would make a small change to Acrobat code. It would bust HP's Print Driver code. Usually it showed up as diagonal lines from one corner to the other. The only work around is Print as image. (looks like an old time TV that has the Horizontal hold out of adjustment.) as of Lat through Acrobat 8 and 9 they've buried the hatchet apparently.

  • All website layers will not print

    Designed website in layers. The background is a jpg. The next
    layer is a white box and then a layer of black text. The background
    prints and the black text, but the white box does not. How can I
    get the white box to print so someone can view the text?

    > Designed website in layers.
    This can cause problems.
    > The background is a jpg.
    By default, most browsers will not print background images or
    colors.
    > The next layer is a
    > white box and then a layer of black text. The background
    prints and the
    > black
    > text, but the white box does not. How can I get the
    white box to print so
    > someone can view the text?
    Send us a link so we can take a look at it.
    -Darrel

  • Is it possible to make an object/colour that will not print but still be visible on screen once saved as a PDF?

    I want to show stuff in a PDF that will automatically not 'print' from Illustrator.
    For example create a colour to make shapes and text that you can read from the saved PDF but will not print once the PDF is printed out
    Thanks

    from illustrator you could put stuff on a template layer (check 'Template' in layer options), but then it would only be visible on the illustrator side; opened in Acrobat the layer would be invisible.
    you could do it from Acrobat Pro though. have 'Create Acrobat layers from top-level layers' checked in the PDF save options, then open in Acrobat and look in the layer properties (this is from Acrobat Pro 9):

  • Why are some objects not printing from Illustrator after I print to PDF?

    Hi,
    I've printed a large Illustrator CS6 document to PDF (using Adobe PDF setting in print dialog box), and it looks just fine when I view the PDF. The problem is that some lines do not print when I try to print the PDF on paper. I've tried adjusting settings and printing to the PDF in different ways, but can't figure it out. Everything looks great on the screen, but some lines are missing once printed to paper. Others have tried printing the PDF as well and are also getting missing lines.
    Any suggestions?! Thanks!

    I've tried selecting print all layers, and I'm also tiling the pages to a custom page size. I've left all the other settings at default. Everything looks perfect on screen, but parts of the same object do not print. I tried to attach a screen shot but am getting an error. Basically each page has a border around it, and one side of the border is not printing on certain pages.

  • Pages - Print guidelines on brochures/not printing a narrow strip!

    Hi - I've perused all the postings that I can see related to brochures but can't see anything like this question.
    I've been using Pages for quite a while and have successfully created and printed out all kinds of things but I just can't figure this out!
    I created a brochure with many layers loosely using the Classic Brochure template. I've printed out several drafts as I work and thought that the part to the side that wasn't printing was my printer error (I have difficulties with thing printing slightly crooked). I've just looked at the document with Invisibles, rulers and layout guides all "on" - there is a grey area on the right side of both pages of my brochure document - it is not "clickable" and ends up at the 26" mark above. It is like a see through layer, I can see my colours, gutters, layout below but this narrow 1.5 cm space does not print out when I print the document - everything else comes out beautifully.
    What could be wrong? I'm on a time deadline with this piece for this week and of course I'm working on it for my sister who is very "anti-Mac" (and things always seem to go wrong for me or my system when I'm doing something for her of course!)
    Replies and solutions gratefully received! I can email my piece out or post it somewhere to look at if you don't understand what I'm talking about.
    I should mention that I did look at the layout and margins settings (nothing seems to make a difference) and I've clicked and tried to "drag" to no avail ...
    Thank you!
    Sandy
    PowerBook G4   Mac OS X (10.4.5)   Also own iBook G4 (son), iMac G4 (daughter) Love setting up websites!

    Is the page size in File > Page Setup the same as the layout size you are trying to use?
    I ask this because I had a similar issue when I tried to reduce my page size in setup to print a slightly bigger page to an A4 printer. It meant that to print my stuff, I had to export as PDF first then print.
    Greg

  • CS4 Some elements from Master not Printing?

    This is a weird one.
    I have a 42 page document with 1 Master Page assigned to all 42 pages.  The Master Page has 5 elements in 5 layers.  Pages 1-35 print perfectly but from page 36 on only prints 3 of the layers on the Master Page while printing everything else. 
    I have re-assigned the Master Pages to insure they are applied correctly.  I have searched for any layers that might be obscuring the Master Page layers on those pages.  I have even made invisible all layers but the missing layers, then print "ONLY VISIBLE LAYERS" and get a blank page?!
    The pages are rendered correctly on the screen and all the elements are displayed but they do not print from page 36 on?
    Any other troubleshooting suggestions?

    Another thing to try, which might help if it's really a document problem:
    Create a new blank doc the same page configuration as the original. Be sure the master pages have the same prefixes.
    On the orignal master page select all and copy, then move to the master page of the new doc and paste in place (enable "Paste remembers layers" from thin Layers panel menu first) and your master should be reproduced with all layers.
    Select all the pages in page panel of the orignal original, then from the panel menu choose "Move Pages..." and select the new document as the target. It will probably be easier to put them before page 1. After moving the pages, delete the original blank first page which should now be the last page. Save with a new name.
    Peter

  • What am I doing wrong? Photos will not print.

    I finally learned a little about layers when I got CS6 on my Mac.
    I bought 2 Topaz plug-ins, Adjust & Simplify.
    I took 39 photos on a flash drive to the local CVS & Rite-Aid and both machines said 34 of my photos are corrupt and will not print.
    What am I doing wrong?
    I did change them from psd to jpeg before putting them in a desktop folder.
    Could that be the problem?
    Thanks, Eli

    Have a look at this article in the Apple Knowledge Base and let us know if it solves your problem.

  • Color LaserJet Pro MFP M176n installed but not printing

    Hello Everyone,
    I have problem with my printer Color LaserJet Pro MFP M176n.
    at thebegining i try to install it buteverytime i run the installer it give me HP Installer error, so i installed the Microsoft Net Framework 3.5 and run the install and it was working perfict, i install the driver on USB cable and after it show me successfull and print test page and finish, so i click print test page and in printer and fax the printer M176n Show 1 printing job and then 0 but no print came out i try again same, i remove the cable and plug it again the printer is responding perfictly but still not printing i check the scanner and its working fine but only the printing is not, so i try to install it through network and it was sccessfully installed with IP but when i print, still the same 1 printing Job but nothing came out of the printer when it came 0 printing job.
    Please help......
    - Windows is windows XP 32bit
    - Printer name   Color LaserJet Pro MFP M176n PCLms
    Thanks
    I did try to use Scan Doctor, the printer didnt print at the first check but when it ask forenternal print test page it printed then it ask me toif it print of not and i click yes it print in enternal print so it ask me to remove and reinstall so i did 2 to 3 times and still same will  not print but when run Scan doctor it will print on enternal print .....
    Wael Hilal

    Hello @ Averus89, 
    Welcome to the HP forum. 
    I understand you have done quite a lot to resolve your M176n and its connection to the ePrint service. 
    I would like to help you with this issue. 
    If the printer is not printing the web services info sheet, or allowing you to add it to HP Connected, I
    would set a manual DNS. 
    I wont go into great detail about setting this up. From your post, I feel you know your way around the printer and your network. If I am mistaken, let me know. I will go into detail. 
    The DNS to try is:
    Primary: 209.244.0.3
    Secondary: 209.244.0.4
    Set the DNS then try printing the web services info page again. 
    Let me know if this helps. 
    Aardvark1
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!

  • HP Laserjet 4100 on network will not print

    Since I’ve installed Snow Leopard, I have not been able to print with my HP Laserjet 4100.
    My set-up: new 24” iMac, many hard drives and more. Two devices: HP Color Laserjet 5550 and HP Officejet J5750 are connected to the iMac through a USB Hub. Although initially scanning did not work with the J5750, I was able to make that work once additional drivers were downloaded from HP. Both work fine.
    I also have an older HP Laserjet 4100 which has been my steady workhorse for years. It only has Ethernet and serial port outlets. It is connected to an AT&T 2-Wired Ethernet Hub/DSL Modem (model 2701HG-B) that is connected to the iMac.
    I’ve contacted HP and Apple about this problem. None of the three people I worked with at Apple could help and the HP representative was unsure if they could help but that it would cost me $40 to find out. According to HP website, since Apple Talk no longer exists, we are required to input the IP for the device. For the 4100, the IP address is 10.0.1.100. I tried this two ways: in the “Add Printer” window under “IP,” inputted as the IPP, and inputted as the HP Jetdirect Socket (as per the HP instructions). When this is done, the printer shows up when you give a print command. However, it does not show up in the “Add Printer” window under “default” or anywhere else.
    Status: If I connect the 4100 Ethernet cable directly to the back of the iMac, the “Supply” level indicates the true level of toner in the 4100. However, it will not print. If I connect the 4100 Ethernet cable to the Ethernet hub, the supply level does not show nor can I print.
    Any suggestions?

    I am struggling with the same problem. I have two HP 4100dtn printers on ethernet. Each has a manually assigned IP address. I can set up the printer(s) just fine in the Print & Fax Preference and Snow Leopard finds the printer just fine when I enter the IP address and chooses the correct HP Driver.
    When I try to print, my print job appears in the queue as expected, than an error appears that something about a "bad command". Sorry, I'm home right now and don't have direct access to the printer so I can't give you the precise language of the message, but the gist of the message is that the system tried to connect to the printer to send the print data but the printer does not know how to respond to the command that was sent.
    It's as if the firmware in the 4100 just doesn't have something in it's lexicon that Snow Leopard needs. The HP web site is no help. One page I found says the printer is supported (http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?lang=en&cc=us&obje ctID=c01664444&jumpid=regR1002USEN ) and another page I found says that it is not supported (http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?lang=en&cc=us&obje ctID=c01879014&jumpid=regR1002USEN). The HP on line chat won't let me log in and hold a chat with HP unless I know the Serial Number of the printer, which I don't have here at home.
    More to follow tomorrow.
    Anyone have any ideas?

  • HP Laserjet 4100 will not print in Snow Leopard

    Since I’ve installed Snow Leopard, I have not been able to print with my HP Laserjet 4100.
    My set-up: new 24” iMac, many hard drives and more. Two devices: HP Color Laserjet 5550 and HP Officejet J5750 are connected to the iMac through a USB Hub. Although initially scanning did not work with the J5750, I was able to make that work once additional drivers were downloaded from HP. Both work fine.
    I also have an older HP Laserjet 4100 which has been my steady workhorse for years. It only has Ethernet and serial port outlets. It is connected to an AT&T 2-Wired Ethernet Hub/DSL Modem (model 2701HG-B) that is connected to the iMac.
    I’ve contacted HP and Apple about this problem. None of the three people I worked with at Apple could help and the HP representative was unsure if they could help but that it would cost me $40 to find out. According to HP website, since Apple Talk no longer exists, we are required to input the IP for the device. For the 4100, the IP address is 10.0.1.100. I tried this two ways: in the “Add Printer” window under “IP,” inputted as the IPP, and inputted as the HP Jetdirect Socket (as per the HP instructions). When this is done, the printer shows up when you give a print command. However, it does not show up in the “Add Printer” window under “default” or anywhere else.
    Status: If I connect the 4100 Ethernet cable directly to the back of the iMac, the “Supply” level indicates the true level of toner in the 4100. However, it will not print. If I connect the 4100 Ethernet cable to the Ethernet hub, the supply level does not show nor can I print.
    Any suggestions?
    Chuck Stewart
    < Edited by Host >

    Well, another week has gone by without a solution.
    Again, here is the problem:
    I have a 24" iMac connected to a USB hub and an AT&T 2-Wire DSL/ethernet hub. When I upgraded to Snow Leopard 10.6.1 and now the update 10.6.2, the two printers on the USB hub work fine but the HP Laserjet 4100dtn does not print. This old printer has only ethernet or serial ports. I've downloaded and installed the HP driver updates from Apple and HP to no avail. According to HP, I must add the 4100 manually using its IP. I've followed the instructions while adding a printer to select IP- HP Jetdirect - Socket. The address of the printer is 10.0.1.100. When I type this in, the window says that this is a valid and complete address. It searches and then says the "Print Using:" is a Generic PostScript Printer. The driver for this printer, I believe, should be "HP LaserJet 4100 Series v.3010.107" Regardless, when I click Add the window "Determining Installable Options" shows "Status: Connecting to printer..." It never establishes a connection.
    The 2-Wire DSL/Ethernet Hub/Modem, has an IP of 192.1687.1.66, Submask 255.255.255.0 and Router (DNS) 192.168.1.254.
    If I plug the ethernet cable directly from the printer to the iMac, the supply level shows correctly but will not print. If I plug the ethernet cable from the printer to the 2-Wire and then to the iMac, it neither shows supply level nor prints.
    Any suggestion as to how to fix this problem? (I've been on the phone with 3 different Apple respresentatives and 1 HP representative with no success.)

  • Officejet Pro 8600 - Macbook Pro and Macbook Air will not print

    Products:
    HP Officejet Pro 8600
    Macbook Pro (Mac OS X, Version 10.7.5)
    Macbook Air (OS X, Version 10.8.2)
    Question:
    Why did my Macs initially print fine, but now will not print at all?
    Full Story:
    I have a wireless network at my house that consisted of a 30mb cable internet, Netgear 900n, HP Officejet Pro 8600, 2 Dell Laptops with Windows 7, a Lenovo Laptop with Windows 7, and Dell Tower with Windows 7 - All printed just fine.
    The HP Officejet 8600 was added to my network about 2 months ago.  
    I added a Macbook Pro and a Macbook Air about 3 weeks ago.  Both Macs printed just fine for about a week.  Then suddenly they stopped.  I spent about 2 hours on the phone with HP Service, and they finally said it must be my router.  So I called Netgear.  Netgear was useless!  They wanted me to agree to charges for services before they would even discuss the issue.  
    Due to information provided by HP's service support, and because Netgear will not support their product, I promptly purchased a new router - an Apple Airport Extreme.
    The Macs recognize the printer, will print if hardwired via a USB cable, but will not print wirelessly to the Officejet Pro 8600.  The PCs print fine.  
    The frustration that is being felt is compound by the fact that the Macs printed just fine with the Officejet Pro 8600 2 weeks ago, and now the printer just shows "idle"... even with a new router. (see image below)
    Please help, I appreciate any support.  
    As a side note, the HP Service rep was very friendly, and definitely tried to support the HP Product, which is much more than I can say about Netgear.
    Thank you,
    This question was solved.
    View Solution.

    Hi,
    More likely the issue related with Multicast, which Apple devices relies on to communicate with teh device through the network.
    First try unplugging the router for 30 seconds.
    Plug it back to the power and wait for 2-3 minutes.
    Turn the HP printer Off and back On, then check for any difference.
    If the same persists, try changing your router configuration as following
    Note: the settings below are not related with the HP product, I provide you the steps as a best effor and those are only based on my own knowledge. you may try modifying the router settings at your own risk:
    Open the router configuration page (can be found listed as the Default Gateway by clicking the Wireless icon on the printer, then print a network configuration report.
    Click the Advanced tab.
    Click the Setup option from the menu, then click on WAN Setup.
    Make sure to uncheck the box next to Disable IGMP Proxying and Apply the changes.
    Click the LAN Setup on the same Setup menu.
    Set the RIP Version as RIP-2 and Apply the changes.
    Reboot your router and then check for any change.
    I hope you may find that information useful, you may also use the user guide below for further information:
    http://www.downloads.netgear.com/files/GDC/WNDR4500/WNDR4500_UM_07DEC2011.pdf
    Shlomi
    Say thanks by clicking the Kudos thumb up in the post.
    If my post resolve your problem please mark it as an Accepted Solution

  • In Pages (5.2), in a table, superscript is not only not printing, but not printing the text around it. Bizarre

    In Pages (5.2), in a table, superscript is not only not printing, but not printing the text around it. Any answers?

    Known issue now for almost 9 months.
    Use Pages '09 if you have it.
    Peter

  • I just updated my Ipad 2 last night with iOS 7.04 now I can't print shipping labels from Paypal. I downloaded a different browser, Dolphin, per Paypal's suggestion. Still can not print. It says it has lost connection with the server.help!.

    Hello! I updated my Ipad now I can not print USPS labels from Paypal. I used my boss' Ipad not updated and worked fine. I am dependent on my Ipad to print these labels for me. I can print anything else I want, like email or packing slips. Any thoughts? I would go back to the previous version if anyone knows how to do that.

    Hello Sapo11,
    To get your issue more exposure I would suggest posting it in the commercial forums since this is a commercial product. You can do this at Commercial Forums.
    Thanks for your time.
    Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    W a t e r b o y 71
    I work on behalf of HP

Maybe you are looking for