Layers palette disappears when I click on my project

I looked but can't find a help reference that addresses this problem.
The layers palette disappears everytime I click on my project. I want it to stay visible, without having to click F7, or go to Windows...Layers every time! How do I tell it to stay visible? It used to, and now it doesn't.
Thank you!
Rebecca

I just figured it out (several hours later).
I had to drag the tab off the palette and onto the desktop and there it is!!
Sorry for the bother. Thanks for the ideas, though.
Rebecca

Similar Messages

Layers palette disappears in photoshop cs5

My layers palette disappears in photoshop cs5 (64 bit and 32) any time I click on another tab such as histogram or info. It also disappears after PS opens and CS live starts. The layers tab is still there but the layers themselves go away. I can get them back by clicking on the tab. A minor problem but is starting to get real aggravating as it disrupts workflow. I tried Ctrl+alt to reset. Doesn't help. Uninstalled Creative Suite Production Premium CS5 with the remove preference box checked at least 8 times as well as using the Adobe Creative Suite cleaner tool. I have gone as far as removing EVERYTHING Adobe on my machine and deleting every adobe reference in the registry, every file with the Adobe name on it. If it had Adobe on it it was deleted.Cleaned and defraged the drives and registry. My Premiere Pro also has problems with the start up screen. I just cannot get a clean install of CS5 no matter what I have done, short of wiping my hard drive. Any ideas?
Adobe Creative Suite Design Premium CS4 (Only DW, FW and ID installed)
Adobe Creative Suite Production Premium CS5
Windows Vista sp2 (64bit)
8 gigs ram
Thanks.

What do you have set for Animation Options?
-Noel

How do I flatten in Acrobat X? My version is 10.1.13, which Updater says is current. Help states to go to Layers/flatten ; but when I click on Layer icon there are no options shown.

How do I flatten in Acrobat X? My version is 10.1.13, which Updater says is current. Help states to go to Layers/flatten ; but when I click on Layer icon there are no options shown.

Creative Cloud chat support (all Creative Cloud customer service issues)
http://helpx.adobe.com/x-productkb/global/service-ccm.html ( http://adobe.ly/19llvMN )

Upper layers partially disappear when lower layers are oriented

I have several layers of a website - each of which have 3D turned on and which were oriented to provide some perspective. I've noticed that when the layers are oriented, they tend to intersect each other - so I see some of one layer and some of another layer. I've also placed an animated graphic of a cursor on top of all the layers. When I reposition the cusor - and it moves into an area of the graphic below - it disappears.
It seems like there's a diagonal line running down the graphic and when images in layers above intersect with that area - they somehow diappear behing the oriented image below.
How can I prevent this from happening?
I was going to insert an image - but when I click the camera icon - all I get is a big grey box that says 'Insert Image' - but no way to select the image I want to insert. Very strange!

Your layers are intersecting because they are intersecting in 3D space. Look at a left or right view and you'll see the layers cutting into each other. If you want them not to intersect then you have to move them. The most common thing to do is to change the Z distance. It sounds like you don't understand 3D space. AE works like all 3D apps except that the layers are limited to 2D planes. If they intersect in the 3D world then they intersect. If one moves behind another then it is behind. The layer order does not make any difference unless you start inserting 2D layers or adjustment layers between 3D layers.
I have no idea what you mean when you say "I was going to insert an image - but when I click the camera icon - all I get is a big grey box that says 'Insert Image' - . . ." because you don't insert images into After Effects, you import them to the Project panel and then you drag or add them to the timeline. There is no camera icon in AE that has an Import function. What exactly are you doing and what app are you using to Insert something by clicking on a camera icon. There are no Insert functions in After Effects.
I suggest you look for some basic AE tutorials on 3D space. There are dozens if not more that give you the basics.

The firefox theme(Lava V1-purple) I installed does not show permanently its background image because it quickly disappears when I click a new tab.. how can i fix this???

When i click a new tab button the background image appears but quickly disappears... I know that this shouldn't happen but it always happen no matter what i try... Can anyone help me??? Please??? I want my background, that is provided by the theme, to stay pemanently when i click the new tab button because the white background for a new tab is totally not my style..

If you go to [www.zigboom.com ZigBoom] there is a customization tab that will explain how to set your about:blank (New Tab) background image using the Firefox Add-On Stylish. Hope this helps.

Visual webpart disappears when i click edit page button

I have created a visual webpart for a menu with listpicker, am able to deploy the webpart in a page, select lists using list picker and save the page. But when again when i click edit page button, the webpart disappears. and again if i add the same webpart
in the same page, the name of webpart comes like "Visualwebpart[1]".

Even in wiki Page, you can make sure that it doesn't disappear.
"When you add a web part to a wiki page, save the page BEFORE configuring the web part. If you need to add several web parts, you can add them all and then save. Once the page is saved with the web parts on it, you should be able to configure the web
parts without any issue"

Why does my image disappear when I click on it to enlarge?

I am using iPhoto '11, version 9.4.3 When I click on a single photo from an event to see and enlarge it, the image disappears, and what I see is a black screen with a large triangle and an exclamation point inside the triangle. What does this mean? I don't think the photo is actually disappeared because I can still see it in the smaller size.

Apply the two fixes below in order as needed:
Fix #1
1 - launch iPhoto with the Command+Option keys held down and rebuild the library.
2 - run Option #4 to rebuild the database.
Fix #2
Using iPhoto Library Manager to Rebuild Your iPhoto Library
1 - download iPhoto Library Manager and launch.
2 - click on the Add Library button and select the library you want to add in the selection window..
3 - Now that the library is listed in the left hand pane of iPLM, click on your library and go to the Library ➙ Rebuild Library menu option.
4 - In the next window name the new library and select the location you want it to be placed.
5 - Click on the Create button.
Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments. However, books, calendars, cards and slideshows will be lost. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory.
OT

When using Typewriter tool, text disappears when I click out of box...

Hi!
I'm sure I've seen this question addressed here before but I cannot make the "Search" work. Every time I search I get "no results" even when I search for something as obvious as PDF.
So please forgive me posting a question that I'm pretty sure has been answered in the past...
When I use the Typewriter tool to type some text, and then I click out of the text box that the Typewriter tool created, the text that I typed disappears. If I double-click on the typewriter text box then the text reappears. Then if I click out, the text disappears. And so on...
How do I make that text stay "viewable" even when I click out of the typewriter text box?
Thank you so much!!
Diane

Hi Larry!!
Here is an image where the box with the Typewriter text (the word "test) is "activated", with the comments list showing down below but without the "test" comment in the comment list being highlighted. At the green "plus sign arrow" in the upper-right corner is the word "test".
Now below is an image where the box with the Typewriter text (the word "test") is not "activated" (but you can see the blue box where the word "test" should be showing), with the comments list showing down below, with the "test" comment highlighted, and the "Comments" dropdown menu so that you can see what's black in the dropdown menu.
When I clicked on the "test" comment in the comment list, the word "test" went away in the upper-right corner and the blue box showed up instead.
Am I showing what you need to see or should I show something different?
Thank again so much!!
Diane

"requests permission" popup disappears when i click on it

requests permission pop up appears, then when i click on it it disappears off to the right side of the desktop.

Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode
*https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

Ipad icon disappears when I click it

Brand new iPad. When I connect to Windows 7 PC with updated iTunes, the iPad icon appears in iTunes but disappears immediately when I click it.

I am using a PC with Windows 7. I've installed iTunes 11 and have iOS 6.1.3 on my phone.

Mail disappears when send clicked

About 3 days ago email I have composed began to disappear entirely when I click Send. It does not go into Sent, Draft, Outbox or any other mailbox nor does it get delivered. I just disappears. This includes Replies as well as New messages. Incoming email is received normally although I've been having some problems with Rules not being used properly but that could be totally unrelated.
There are no error messages...none. The ONLY thing I can find is a message in Console like this for a test email I just tried to send: "9/13/12 9:31:36.898 AM Mail[1443]: deleting invalid message from outbox". Clicking Inspector for the message provides nothing that I understand and cannot copy nor can I Grab it to attach. We also have an XP PC using Outlook Express, the same email provider (RoadRunner) and account that sends email without a problem.
Does anyone have any idea why this happening? Seaching the web or these Support Communities for the Console message provides no useable results.
Thanks in advance for any help.

In Mail, if you click on the Sent mailbox in the Sidebar, and then on Mailbox in the command bar, and then place the cursor on the Command to Use This Mailbox for, are the choices black or gray? What you describe would most match needing to choose the Sent as the destination of message sent from Mail. Is not required with all accounts, but can be the cause of this.
Ernie

Multiclip angle disappears when I click on the file

I've created a multiclip of two video angles and one sound source. When I click on the clip in the event browser, the angles show up properly in the angle viewer. But when I clip on the display at the top of the event browser, only one video angle shows up.
And when move the clip to the storyline for editing, it's also missing.
This is driving me crazy! I've already trashed the prefs. This has never happened before.
-- all clips play fine separately.
-- all clips sync properly
-- same video clip disappears each time.
Any thoughts?
Thanks,
/john

Good question:
Here's a screen grab of that angle sitting in the timeline by its lonesome. It just doesn't like to be part of a multiclip and I can't figure out why.

JMenu fails to disappear when user clicks outside the JMenu................

I have implemented a JMenu within a JMenuBar everything runs fine. However, with this application and with all others I have seen when you click a JMenu leaving it open and then click anywhere on the title in Windows the JMenu remains open. Windows native programs dont do this and it is just a nuisance for a user to go and disable the JMenu by clicking it again.
Does anyone have a solution for this.

As this new feature works... say you have a JInternalFrame you want to be "modal" well cause they are lightweight, that is inpossible. SO now you can set a JDialog to unDecordated() and implement the JInternalFrame paint methods, and produce a "JInternalFrame" that is "modal" (just an example) i just the "setUndecorated(false);" in my JXcalendar popup, it works bette rthan JWindow, cause it listens for all window events.
Hi Johannes,
I checked this and it did not work. Then I read the
bug evaluation (should have done this before): JAVA
doesn't get any event from the title bar. The
workaround is provided in 1.4 with
"non-decorated window frames and the ability to add
user defined window decorations".
I don't know this stuff. Is there anybody who already
has got experience with these new features?

Why does a saved hotmail message disappear when I click on "continue to create the message? It only happens with Firefox, not with Explorer.

Why does a saved hotmail message disappear after I click on "continue creation the message? It only happens with Firefox, not with Explorer.
== This happened ==
Every time Firefox opened
== A few weeks ago

Hello Helena.
You may be having a problem with some extension or plugin that is hindering your Firefox's normal behavior. Have you tried disabling all add-ons (just to check), to see if Firefox goes back to normal?

Wrong project opens when double clicking on a project in project view

This is really weird. I have a personal library that was created by importing my entire iPhoto library and a Pro library that was created by just importing groups of images and folders from one of my drives. Both libraries are 100% managed. When Aperture opens, and my Personal library was the library that was open when I last closed Aperture, this behavior occurs. I go to double click on a project in project view and some other project opens. It's not random either. If I click on the project "Kennesaw Hike" for example, then "Jeremy's Birthday" will open every time.
Now the strange thing is when I go to File, Switch To Library, and choose my Pro Library and then switch right back to my Personal library, the projects in the project view open correctly. Something else that might be related. A few times in the last week when the Personal library was the open library when Aperture was closed last, and then I open Aperture later, it would prompt for my serial number again.
Another tidbit that might be of interest. I recently replaced the drive both libraries were on and copied them both to a new larger drive.
Any ideas?
Thanks

I'd like to add a "me too" to this.

Layers palette disappears when I click on my project

Similar Messages

Maybe you are looking for