Layers problem: - how can I upload the PSD for analysis?

Hi all. Following one of my earlier questions, when several members gave me some great advice about layers, I've been experimenting.
Now, I have a PSD that I'd like advice on. It's 1.42MB. Can I upload it somewhere so that it can be examined on the forum?

It's because you have partial transparency at the edges of the kiss image. Probably from feathering or partially erasing it?
Turn off all the other layers to see this
If you take a history snapshot, before you feather it, you can paint back the pixels exactly where you want them with the history brush set to that snapshot
Background2 has no transparency so obscures any other layer beneath it! so when at the top you can't see through it, like a stack of plates?
regards
John

Similar Messages

T61p Battery Problem - how can i get the warranty for my baterry?

- My brother bought a lenovo t61p in US and it is a my present but i live in Vietnam.
( Order date and time: 2CQTTE 04/30/08 19:15:30
Customer Number: 4290001
Order Number: 2CQTTE
Ship-To:
KIEN TRAN
321 74TH WAY N. )
- I have a problem with lenovo t61p baterry now, i just can use t61p in baterry mode < 1 hour.
( manufacture name: SONY
manufacture date: 2008-04-15
first used date: 2008-05
serial number: 4125
bar-Code number: 1ZET184F40X
fru-part number: 42T4566
cycle count: 47
- It is still under warranty. But can i get the warranty for battery in Vietnam? because Lenovo have a branch in Vietnam (http://www.lenovo.com/vn/en/) and the warranty center in Vietnam is in FPT company (big vietnamese company).
- Please show me how can i get the warranty for baterry in Vietnam?
Thanks
Message Edited by dracubi on 03-01-2009 01:18 PM

Well I assume that if the laptop is under warranty you should be able to get service for it. You can check the warranty status at http://www-307.ibm.com/pc/support/site.wss/document.do?lndocid=LOOK-WARNTY#sw That should tell you what the terms of your warranty are. If it is an international warranty you can get service at your local lenovo distributor. My t61 for example has a 3 year warranty that is valid in Turkey,. But also I have 1 year international, 2 years pan-Europeand and 3 year Turkish warranty. That was one ofthe stipulations in the contract when our thinkpads were purchased....

How can I upload the back-up folder into iWeb?

How can I upload the back-up folder into iWeb?
Hi
I've set up my website using iWeb 08, always keeping the latest version in iWeb and backing it up in a folder on my HD.
Yesterday I got rid of the current design iWeb and tried to upload the back-up folder into the iWeb application. No success.
How can I upload the back-up folder into iWeb? Many thanks for your help.

Welcome to the discussions. Only iWeb's Domain file can be opened in iWeb. See this Apple doc on How to back up MobileMe data. It says:
Any websites you have published with iWeb should still be available within iWeb. iWeb stores everything in a Domain file, normally located in the ~/Library/Application Support/iWeb folder (although it can be moved). If you no longer have this file, you can view your currently published pages and manually recreate them within iWeb, but there is no way to import published pages back into iWeb. You can manually back up the Domain file, or use Backup to back it up.
Presumably you've been prudently making backups of your Mac's internal HD, so search there for the Domain file's invisible extension:
.sites2
If you can't find your old Domain file, paragraph 2.3 of this FAQ page gives some tips on how to use published files, graphics, photos, etc., to help rebuild the site from scratch:
http://iwebfaq.org/site/iWebBackupretrieve.html

How can we upload the asset transactionn data

how can we upload the asset transactionn data pls let me know

There are several ways to upload asset transaction data,
<b>- Automatic legacy data transfer using batch input
- Automatic legacy data transfer using direct input
- Automatic legacy data transfer using BAPI
- Manual legacy data transfer transaction
- Legacy data transfer using Microsoft Excel</b>
You may reference to SAP help by the following link for details.
http://help.sap.com/saphelp_47x200/helpdata/en/01/dfd83705c0c931e10000009b38f842/frameset.htm

Hi, how can i break the value for a row and column once i have converted the image to the array???????

Hi, I would like to know how can i break the value for a row and column once i have converted the image to the array. I wanted to make some modification on the element of the array at a certain position. how can i do that?
At the moment (as per attachhment), the value of the new row and column will be inserted by the user. But now, I want to do some coding that will automatically insert the new value of the row and the column ( I will use the formula node for the programming). But the question now, I don't know how to split the row and the column. Is it the value of i in the 'for loop'? I've tried to link the 'i' to the input of the 'replace subset array icon' , but i'm unable to do it as i got some error.
Please help me!
For your information, I'm using LABView 7.0.

Hi,
Thanks for your reply.Sorry for the confusion.
I manage to change the array element by changing the row and column value. But, what i want is to allow the program to change the array element at a specified row and column value, where the new value is generated automatically by the program.
Atatched is the diagram. I've detailed out the program . you may refer to the comments in the formula node. There are 2 arrays going into the loop. If a >3, then the program will switch to b, where if b =0, then the program will check on the value of the next element which is in the same row with b but in the next column. But if b =45, another set of checking will be done at a dufferent value of row and column.
I hope that I have made the problem clear. Sorry if it is still confusing.
Hope you can help me. Thank you!!!!
Attachments:
arrayrowncolumn2.JPG ‏64 KB

How can we do the validation for non visible records in table control.

Hi Experts,
I have a table control which displays list of material details. I have a button to upload the material details from excel file to table control directly. I have to validate all the customers which are exist in the table. But my item (Material) table control displays only 5 rows i.e only 5 entries are visible in module pool screen. The validation is done for 5 records only in PAI event, but i need to do validation for rest of the records too (Which are not visible on items table), if validation fails then needs to display error message.
How can we do the validation for non visible records in table control.
Regards,
Bujji

Hi,
try validating material before displaying it in table control...'
Rgds/Abhhi

How can I decouple the pagination for a global region?

I was having a delightful time using a common region defined on a global page when I determined that pagination setting was begin carried from one page to the next. Arghhhh! So for example, if I have paged to the second set (page) of rows (11-20) on Page 1 and then I go to Page 2, the second set (page) of rows (11-20) is displayed there. If I go to a page which only has a first set of rows (1-10), I get the pagination error "Invalid set of rows requested, the source data of the report has been modified. Reset Pagination". And when I click to reset, it just repeats the error. [I suppose it tries to display the second set or rows (11-20) again -- which doesn't exist. What's that saying about insanity?]
How can I decouple the pagination for a global region? I want it to operarate just as it would if it were not sharing a common region. So if I'm looking at rows (11-20) on page 1, I can go to any other page beginning with rows 1-10 there. Then return to page 1 where I left off with rows 11-20 displayed. One solution is NOT to paginate but that's not my preferred solution.
Howard

Howard(...inTraining) wrote:
I was having a delightful time using a common region defined on a global page when I determined that pagination setting was begin carried from one page to the next. Arghhhh! So for example, if I have paged to the second set (page) of rows (11-20) on Page 1 and then I go to Page 2, the second set (page) of rows (11-20) is displayed there. If I go to a page which only has a first set of rows (1-10), I get the pagination error "Invalid set of rows requested, the source data of the report has been modified. Reset Pagination".
The fact that there are different numbers of rows returned on different pages implies that the reports have some local page dependencies, so why try to use a global component? What's the actual requirement? How many pages does the report have to appear on? (Please say it is a report and not a tabular form...)
How can I decouple the pagination for a global region? I want it to operarate just as it would if it were not sharing a common region.
The point is that a global region is just that: a single region that happens to be displayed on multiple pages. It does not create multiple instances of a region on different pages. (Specifically, a region has a single region ID, and this is used to reference it whether it appears on one page or all of them. The region ID is used by the report for the purposes of AJAX refresh, pagination etc.)
A similar situation was discussed a long time ago. I'm rather surprised that Scott regarded it as a bug: the fact that it doesn't seem to have been "fixed" or have a bug number attached may indicate that the others on the APEX team disagreed with him? I haven't tried the workaround he suggested, however I don't think it's likely to be prove a useful line of attack for your issue, as (1) it resets pagination rather than preserving it; and (2) it doesn't appear to be compatible with the AJAX PPR pagination used in more recent versions of APEX.
I can't see any straightforward "solution" (largely because I don't think there's really a problem: the exhibited behaviour is exactly how I expect/want global regions to behave). Pagination processing is undocumented. The current 4.2 apex.widget.report.paginate JS method is specifically annotated as "for internal use only". Search the forum for custom pagination techniques. Messy looking hacks for IRs have previously been suggested.
So if I'm looking at rows (11-20) on page 1, I can go to any other page beginning with rows 1-10 there. Then return to page 1 where I left off with rows 11-20 displayed. One solution is NOT to paginate but that's not my preferred solution.
Assuming that there aren't too many pages involved, the other obvious option is to create unique regions on the required pages. You can achieve some level of reusability by creating SQL Query (PL/SQL function body returning SQL query) reports based on an external function so that there's only a single SQL source to be maintained.
Explain the requirement in more detail. Pagination is not the only option for reducing the quantity of displayed information. Often it's better to display some of all of the data, rather than all of some of it...

How Can I change the Authentication for this Dynpage

Hello ,
I have created a rss feed in special Dnypage.   When I try to connect with rss reader to dynpage it occurs an error 500. The problem is that no logon screen appears and the portal would start the Dynpage with the User Guest.
How Can I change the Authentication for this Dynpage ? I need a LogonScreen
RSS URL:
/irj/servlet/prt/portal/prtmode/rss/prtroot/com.geberit.ep.uwlquick.uwlquickstarter?mode=rss

Hi ,
sry the entry in xml does not help. No Logon Prompt
<?xml version="1.0" encoding="UTF-8"?>
<application>
<application-config>
    <property name="SecurityArea" value="NetWeaver.Portal"/>
    <property name="Vendor" value="xx.com"/>
    <property name="PrivateSharingReference" value="com.sap.portal.htmlb,com.sap.portal.pcd.glservice,com.sap.portal.ivs.iviewservice,usermanagement,,com.sap.netweaver.bc.uwl"/>
</application-config>
<components>
    <component name="uwlquickstarter">
      <component-config>
          <property name="SafetyLevel" value="no_safety"/>
        <property name="ClassName" value="com.xx.portal.uwl.uwlquickstarter"/>
      </component-config>
          <component-profile>
               <property name="AuthScheme" value="default"/>
          </component-profile>
    </component>
</components>
<services/>
</application>

How can I disable the Keychain for an application?

How can I disable the Keychain for an application? A window pops up every time I open a page in Safari asking me for a password. I'm using a student laptop, so while I'm an administrator I lack access to a few things, such as the Keychain Access application. Is there any way to deal with this?

It's possible you may be able to trick it by creating an Applications folder in your Home directory and moving Safari to it.
I can't test this but it might work. The problem is that you would miss Safari updates, so you'd have to keep an eye out for them. Another solution may be to download another Safari and install in yourname/Applications.

How can I download the software for a fujitsu S1300i scanner onto my iMac

How can I download the drivers for a Fujitsu Snapscan S1300i scanner?

If the scanner didn't come with the disc to download the drivers then you have NO CHOICE but to go to Fujitsu's Web Site and see if they offer a download for there drivers. It helps everyone if you fill out all of your Profile as to the year of your iMac and all of the information from about this Mac at your Black Apple. The more information you give us the easier it is for us to give you accurate information concerning your problem.
Cheers
Don

HT1353 I have a Ipod mini 6gb that still works but a new computer that doesn't have its software. How can I download the software for it

I have a Ipod mini 6gb that still works but a new computer that doesn't have its software. How can I download the software for it

Check the iPod Hardisk health with the iPod Disk Diagnostic, as posted by tt2
https://discussions.apple.com/message/17776595#17776595
It wont fix your problem, but may tell help troubleshoot, why it is freezing iTunes, especially when the Pending and Realloc numbers are high.
have a nice day!

How can I display the range for LastFullMonth in the header of a report

How can I display the month for LastFullMonth in the header of a report run in the past so that a report that ran sept 1 2009 selecting data for LastFullMonth (august 2009) displays sept 2009 in the header even if there is no data selected by the report?

Good,
Sometimes I answer these questions and completly miss it....
( lack of understanding on my part )

How can we specify the Mailbox for Notes?

In Mail.app, how can we specify the Mailbox for Notes (where the new notes will be resided)? It is now 'On My Mac'. I wish to change to my IMAP Mailbox so it sync with my iPhone by just checking email (not by syncing on iTunes).
Thanks in advance.
Message was edited by: Ekapon

You could use the DecimalFormat or NumberFormat to do the job.
double number 1234.567;
DecimalForamt df = new DecimalFormat("###.##");
String s = df.format(number);or
double number 1234.567;
NumberFormat nf = NumberFormat.getNumberInstance();
nf.setMaximumFractionDigits(2);
/* if needed.
   nf.setMaximumIntegerDigits(value);
   nf.setMinimumFractionDigits(value);
   nf.setMinimumIntegerDigits(value); */
String s = nf.format(number);I didn't test the codes but they should work. For more information, please consult the documentations.

I no longer want to merge my work laptop with my icloud account on other devices. How can I change the setting for the laptop?

I accidentally agreed to set up my work laptop icloud account to merge with my other devices and want to keep the work information separate. How can I change the setting for the PC at work?

Sign out of iCloud.

How can I change the password for the USER in SAP.

How can I change the password for the USER in SAP?
also I want to change the Language and date Format b/c it's displaying in German language..

Hi,
Assuming that User has already his/her user-id and password, and now he/ she wants to change it.
select the client and provide Log-in credentials. Now, instead of 'ENTER' there is one Tab: 'New Password' (up, left hand). Click it.
Now, system will ask for new password to change.
If you are asking from Basis point of view, then T.code: SU01 - User Maintenance.
Enter User's id and Click Change icon.
It will lead to Page: Maintain User.
Here, Select tab: Logon Data
There is a Sub-Tab: Password.
Here, key-in change password and SAVE.
For Language and Date format, contact your Basis-Personnel.
Best regards,
Amit

Layers problem: - how can I upload the PSD for analysis?

Similar Messages

Maybe you are looking for