Layers while using mobile app?

If a pdf has layers is it possible to view and select/deselect them while using the mobile app?

Hi,
Currently, it is not possible to turn on or off each layer in the Adobe Reader mobile apps (for iOS, Android, Windows Phone).  I am not aware of any other third-party mobile apps that support layers in PDF documents.
I'd recommend using the desktop version of Adobe Reader on a Mac or Windows computer to view PDF documents with layers.  Sorry for the inconvenience.

Similar Messages

  • HT1665 There is a bug in the spellchecking functionality when typing in the web view or while using Blogsy App. Why? Why my IPad crashes so often?

    There is a bug in the spellchecking functionality when typing in the web view or while using Blogsy App. Why? Why my IPad crashes so often?

    I have always found spell check to be "buggy" in every version of all of the iOS's that I have run on my original model iPad and my new iPad - especially when replying and typing posts in these forums. It works perfectly in every other application on my iPad but it has never worked perfectly in any web browser that I have used on my iPad - no matter what I have done to try to correct it. That is what MY experience has been with spell check on my iPads.
    As for the crashes on your iPad try these basic troubleshooting steps.
    Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
    Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
    Quit all apps and restart. Go to the home screen first by tapping the home button. Quit/close open apps by double tapping the home button and the task bar will appear with all of you recent/open apps displayed at the bottom. Tap and hold down on any app icon until it begins to wiggle. Tap the minus sign in the upper left corner to close the apps. Restart the iPad. Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.

  • How can I continue listening to a YouTube video while using another app?

    How can I continue listening to a YouTube video while using another app?

    How can I continue listening to a YouTube video while using another app?

  • TS1702 While using an app it will close by it self and I am looking at the start desktop icons.

    My iPad closes while using an app an I am back at the icon desk top.

    What App?

  • Ipod touch 4 gets hot while using some apps like angry birds?

    Is it normal for the upper back of the ipod touch 4 to get hot while using some apps like angry birds? Is this a potential battery problem? It doesnt get hot while charging or playing songs... Just when using some game apps.  I assume that it has something to do with battery drain, should I be concerned?

    When the iPod is used heavily like for games it is norma for the iPod to get warm.  Unless you hav short battery life I would not be concerned.

  • HT201406 1st. Gen iPad question:  the touch keyboard does not appear when attempting to input data into data fields - this happens while using all apps, ex. Notes, Google, Pages, etc..

    1st. Gen iPad question:  the touch keyboard does not appear when attempting to input data into data fields - this happens while using all apps, ex. Notes, Google, Pages, etc.. The cursor prompt is present.  Tapping screen just brings up the option to: "Select   Select All   Paste."   I have rebbooted with no change. 
    Message was edited by: Jimfromutah
    The problem was my connected bluetooth keyboard.

    1st. Gen iPad question:  the touch keyboard does not appear when attempting to input data into data fields - this happens while using all apps, ex. Notes, Google, Pages, etc.. The cursor prompt is present.  Tapping screen just brings up the option to: "Select   Select All   Paste."   I have rebbooted with no change. 
    Message was edited by: Jimfromutah
    The problem was my connected bluetooth keyboard.

  • The app store keeps popping up (with an app to download) while using other apps. It is getting incredibly annoying. I am currently using the QR reader app. How do I get it to stop?

    The app store keeps popping up (with an app to download) while using other apps. It is getting incredibly annoying. I am currently using the QR reader app. How do I get it to stop?

    you can try a soft reset, or u can try to turn it off and then back on. Or take it to the apple store and see what they say about it. Hope this helps

  • TS1702 While using the App Dragonvale when playing and giving a command the app turns me back to the home page.  Any suggestions ?

    While using the App Dragonvale when playing and giving a command the app returns me to the IPad home page. Has this happened to anyone?
    How do I fix ?
    Aileen

    See:
    iOS: Troubleshooting applications purchased from the App Store
    Restore from backup. See:
    iOS: How to back up
    Restore to factory settings/new iPod
    Also, have you visited the developer's support site?

  • HT204053 I'm having APPLE ID. While using in app store it asks Credit Card details, but i'm not having credit card or any(as mention). How to download free apps. pls solve my problem

    I'm having APPLE ID. While using in app store it asks Credit Card details, but i'm not having credit card or any(as mention). How to download free apps. pls solve my problem

    There are instructions on this page for how to create an account without giving a credit card number : http://support.apple.com/kb/HT2534 - i.e. select a free app an create an account when 'buying' it (this only works for new accounts, not for updating an existing account)

  • 2FA for Windows login using Mobile app

    Hi All,
    We are planning to implement additional login security for our domain.
    Present :
    Windows Server 2012 R2
    Active Directory
    800+ users
    Requirement : need to enable additional security (means 2FA) for all users to login to AD and other applications (like Billing, Accounts, etc - Third Party Apps).
    We recommend to use a mobile app to general passcode for 2FA.
    Please advice the best industry standard method and OS/Application requirements.
    Thanks in advance
    Shibu

    Some Microsoft solutions provide 2FA like Microsoft Azure.
    For Windows logon or your applications 2FA, you will need to use third party solutions for 2FA.
    For Windows logon, this is an example of third party solutions you can use: http://2fa.com/2fa-one/
    For your applications, you need to check with their developers if they support 2FA and what are the supported integration products.
    This posting is provided AS IS with no warranties or guarantees , and confers no rights.
    Ahmed MALEK
    My Website Link
    My Linkedin Profile
    My MVP Profile

  • IPhone dies while using radio app 3g plugged in?

    I am curently in the hospital under going antibiotics treatment and will be stuck for 2 weeks. So I thought to myself I better bring my charger and I should be all good. I have noticed on several occasions that while using a radio app or watching a movie over 3G my phone dies even while plugged in? It don't make sense. I thought if I have a full battery and plugged in I should be good. But when listening for a couple of hours even with the screen locked it shuts off and I get the too low to turn on battery icon? Is this a major flaw that apple forgot to mention that the phone draws more power than it takes in while charging or plugged in?
    This is not acceptable. My phone is not jailbroken and I am not tethering. So what's up with this?

    I don't live in that area (I'm in northern Orange County, CA), but my neighbor and I have been having the same problem since last Saturday (Feb. 5) in the area around where we live (we both have iPhone 4's, and they still work fine in other areas). Note that we have full bars, and the "3G" symbol on the display, but get no data over 3G; disabling 3G allows access using EDGE (slowly), and phone/texting works fine (it's just the 3G data in our neighborhood that's broken). Since we both have WiFi in our homes, we didn't initially identify the 3G problem; what we both noticed was a sudden increase in iPhone power consumption (beginning last Saturday) when we are in our neighborhood (even when the phones are idle); I used to go 3-4 days on a charge, but now the battery drops at a rate of about 10%/hour when I'm around the house. Interestingly, my neighbor also has an iPad, and it doesn't exhibit the problem. Both phones and the iPad are running iOS V4.2.1. We've tried all the normal things (rebooting, clearing network settings, etc.), and nothing works. I spent some time on the phone last night with AT&T, and they are going to send someone out to check connectivity.

  • My Ipod touch has frozen while using an app.

    My new Ipod touch has frozen while I was using an app. I can't even turn it off. It has pink and blus stripes on the screen. I don't want to lose all my stuff and haven't yet got a back up on the computer. What should I do?

    Have you tried a hard reset yet? To do this, press and hold both the Sleep/Wake and Home buttons together long enough for the Apple logo to appear. 
    See here for more assistance.
    http://support.apple.com/kb/TS3281
    B-rock

  • Downloading While Using Another App

    Ok, similar to my other question. I am currently downloading a very large program. If I use another app will it download in the background or do I need to wait until the download is complete before using my iPad?

    By "downloading a very large program" do you mean a large App from the App Store?
    Yes you can let it download while you do other things on the iPad.

  • HP 7510 won't scan from ADF when using mobile app on iPhone or iPad

    Hi,
    I have an issue where the mobile app will happily kick off the scan process and the printer looks and sounds like all is fine. But when the scanning is completed, the app says 'there was an error during scanning' and it does not save the scan. This only happens when using the ADF, not when scanning via the scanner glass - it's all fine doing it that way.
    I'm running v4.3 of the all in one app which was released in the last week or so. Not sure if it a bug with the app that's causing the issue..
    Anyone seen similar issues and resolved?
    Cheers,
    Simon.

    Hello @sjholcroft, 
    Welcome to the HP forums.
    I understand that the All-in-One Printer Remote app is not working properly since the last update.
    I would like to help.
    Nothing has been stated by HP about this issue.
    If there is a possible issue, HP would like to know.
    Please call our Cloud Services at 855-785-2777.
    If you live outside the US/Canada Region, please click the link below to get the support number for your region. http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html
    Hours:
    Mon-Fri. 8am - 11pm, Sat. 9am-8pm - EST
    Mon-Fri. 7am - 10pm, Sat. 8am-7pm - CST
    Mon-Fri. 6am - 9pm, Sat. 7am-6pm - MST
    Mon-Fri. 5am - 8pm, Sat. 6am-5pm - PST
    Aardvark1
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!

  • While using Build App installer, how does one include drivers for hardware

    I have a LabView vi and I would like to create an application to be installed on a different computer that also requires a PCI-6503 digital IO card for the purpose. While using Build Application to create the installer, is there a way I can include the necessary hardware drivers for the DIO card?
       Thanks.
        -Bahadir

    Hi Bahadir,
    Your request for the option of including specific drivers (in your case NI-DAQmx)
    with the installer of your executable is something that is something we have
    heard from many customers. With any version of LabVIEW up to 7.1.1, you have
    always had to install the drivers separately or in best case by creating your
    own *.bat file that defines the installation procedure of the driver.
    However, LabVIEW 8 is here for
    your rescue! We have listened to our customers and now you have the simple
    option of putting a checkmark for the option of the driver you want to be
    distributed with your installer. Check these options from the Installer
    Provider:
    Please read more about the new possibilities with LabVIEW 8 from this tutorial:
    Distributing
    Applications with the LabVIEW Application Builder
    The best part of it all is that you can try it all
    (including Application Builder) out by downloading the Evaluation version here:
    LabVIEW
    8 Evaluation Software Download
    Notice that the Evaluation version of LabVIEW 8 is similar
    to the Professional Development System, except from a watermark and the fact
    that is only runs for 30 days. Everything else is possible!!!
    Try out LabVIEW 8 and check out all the other places we have
    listened to our customers...
    Have fun!
    - Philip Courtois, Thinkbot Solutions

Maybe you are looking for