Layoff pulldown problems from 23.98 DV timeline

Every time I try to layoff my 23.98 DV timeline onto a miniDV tape, FCP seems to put in a 2:2:2:4 pulldown, no matter what i have the settings on.
at least i assume it's a 2:2:2:4 pulldown. i check by laying off to tape using the Edit to Tape-Assemble function, then recapturing the footage using the standard NTSC DV easy setup to retain the 29.97 and see exactly what's there. each and every time, i end up with 4 progressive frames, and then the last frame is repeated.
i've tried fiddling with the playback settings, and it's always set correctly on 2:3:2:3. nothing seems to make any difference. i've also tried this on two different setups: a quadcore G5 powermac with 2GB RAM using a Sony DSR-25 deck and on a G5 Imac with 512GB RAM using an old Sony palmcorder-style camcorder. i can't remember the model, but fair to say it's about 5 years old and consumer-level. both situations gave me the same thing, and i tried all the different playback settings.
i also tried nesting my 23.98 sequence into a 29.97 timeline , rendering, and trying to output from that. i ended up with the same 2:2:2:4 situation, right in the timeline.
Original footage was shot on a Panny DVX-100A at 24pA, and captured with the 24pA setting into FCP 5.0.4. This was repeated once because, for some reason, the first time i captured the footage, FCP threw away the wrong frame so i ended up with 3 progressive frames and one interlaced frame, rather than 4 progressive frames.
clearly i'm missing something, a button or setting somewhere or just a basic understanding of what i can and can't detect through final cut. or maybe i'm just confused about this pulldown thing. any ideas? any help would be greatly appreciated.
Dualcore Powermac G5 Mac OS X (10.4.1) FCP 5.0.4
Quadcore Powermac G5 Mac OS X (10.4.1) FCP 5.0.4
Quadcore Powermac G5 Mac OS X (10.4.1) FCP 5.0.4
Quadcore Powermac G5 Mac OS X (10.4.1) FCP 5.0.4
Quadcore Powermac G5 Mac OS X (10.4.1) FCP 5.0.4
Quadcore Powermac G5 Mac OS X (10.4.1) FCP 5.0.4
Quadcore Powermac G5 Mac OS X (10.4.1) FCP 5.0.4
Quadcore Powermac G5 Mac OS X (10.4.1) FCP 5.0.4
Quadcore Powermac G5 Mac OS X (10.4.1) FCP 5.0.4

Telling you it should work, isn't gonna help, but it should...
How about RT and render settings? Do you have them set any different for edit to tape than for display?
One sure way I can think of to do it would be export a 23.98 quicktime, bring that back in and run Nattress standard's converter on it, but let's not go there first...
Patrick

Similar Messages

How to remove 3:2 pulldown properly from 24p SD 16:9 NTSC footage (After Editing)

Hi,
I'm currently editing a full length feature film and originally imported all the footage directly into final cut making the timeline become a 29.97 timeline, when the pulldown should have been removed before the fact. After much research I know that you can properly remove the 3:2 pulldown from the 24p footage after editing and can be done in compressor. I've tried a number of different compressions and seem to have the dimensions correct which is good. But the 16:9 footage when brought into iDVD or dvd studio pro it seems to want to make the footage 4:3 which is quite confusing and frustrating. I need to be able to get my compression settings correct so that i'm able to put this on a dvd properly. I originally exported the footage from final cut as DV/NTSC and made sure it was 16:9 coming out of final cut. The resolution is 720x480 but comes out as 853x480 as its dimensions and has a squeezed look to the video as it did on its timeline unless the preserve aspect ratio button was unchecked. The only way around getting the squeezed look to go away is to go through compressor and make sure that letterbox is turned off so that its a full screen. Even though its a large file size I compressed using apple pro res to get the best resolution I could, but I need the best results with the lowest file size since the running time is roughly 1:43:00. The footage looks good coming out of compressor, but for some reason even though its full screen 16:9 everytime it is brought into iDVD or dvd studio pro it wants to make it 4:3? what is the reason for this! I recently read an article on this problem and the reverse telecine option within compressor is used to remove the extra frames that final cut adds, and makes the video of better quality relieving the horizontal lines that are caused by the extra frames. I need help on this and I know it can be done because people have proof that it works but I can't seem to reach a solution myself. Thank you to all who reply much appreciated!

What happens when you drop a 4:3 clip - with its anamorphic flag cleared - into the 16:9 sequence ?
I have not been doing exactly this, but I have been going the other way, to produce letterboxed 4:3 footage from 16:9 HDV.
I found, when dropping the clip in, FCP automatically set a scale and distort, to correct for the differnce in aspect ratio - does it do this for you for 4:3 SD on a 16:9 SD timeline ?
Remember, you have to re-open a clip, from the sequence timeline, to see its motion settings in that timeline - I keep forgetting this, drop a clip on, then wonder why nothing I change on the clip happens in the sequence!
Regarding the final output, it all sounds fine, except for the possibility of the 4:3 TV output - the 16:9 footage would be okay letterboxed, but the original 4:3 footage would be better 1:1 - if you had to pillar box the 4:3 in the 16:9 (probably what FCP would do by default) and then letterboxed that when making the 4:3, you'll end up with a box in box, plus interlacing problems from the rescale.
I would consider making a second 4:3 sequence, once you have finished the edit on 16:9, try copying all the 16:9 edits (Cmd-A, Cmd-C) and pasting them into the new 4:3 (Cmd-V) - then its a case of leaving the 16:9 letter boxed, or zooming and panning it for 4:3, and removing the scale / aspect from the 4:3 sequences alltogether, so they play normally.
Messy - isn't it ?
Good luck!
PowerBook G4 Mac OS X (10.4.4)

Footage problems from digitising with Canon XF305 to FCP

I have uploaded my footage no problem from a canon 305 to FCP (7) using log and transfer but when I play back the footage it has lines going through it when the subject is moving. I may have the incorrect settings or something. When I put a clip onto the timeline it says it amends the settings to the clip but the clip remains the same. There are no issues with the camera and uplaoding to avid (i don't have avid but other footage from the same camera was digitised fine).
Help! I can upload a clip tonight as its pretty strange but I'm sure its just my lack of editing wisdom and its probably something really easy to resolve.
Thanks in advance.

No change but i did upload a small clip to youtube from my capture scratch and the lines dont appear :/ weird! http://youtu.be/uOUdrqL4ISc (put it on HD)
Do you have any idea what else cud course the problem?

Data problem from DSO to cube

hi
i am facing data from problem from dso to cube
i am getting daat into dso
plant   material doc_num itemno qty
p1      m1           1              1         10
p1      m1           1               2         20
dso i am uisng key fields
doc_no
item_no
doc_year
data fields
material
plant
qty
while loading data into cube
its showing only
p1 m1 1 2 20
item 1 is missing
there is no iten num filed in my target field?
ple let me know ur idea.

Hi,
The problem is in your ODS/DSO.
In your ODS you have 'Doc_num' as key field.
For both Items 1 & 2, you have same key field ( Doc_Num) Value.
So, the first record will be over written by the second one. So from your ODS you will get only the latest record to the Cube.
If you want to send both doc_nums to cube, you need to bring doc_num to the data fields area of ODS.
Hope this helps.
Cheers
Praveen

I have set up my new iPad 2 on my windowsn 7 computer, but experienced syncing problems from the start. It seems that it doesn't recognize the iPad, although it appears in iTunes.It only gives set up as new or restore options.

I have set up my new iPad 2 on my computer (Windows 7), but experienced syncing problems from the start. It seems that although my iPad is regognized in iTunes as it appears there, it only gives met the options to set up as a new iPad or restore from the backup, no synching options. What do I do?

File>Devices>Transfer Purchases will transfer the itunes purchases to your ocmputer.
You should sync your ipod to your computer regularly.

Communication problem from the vpn-anyconnect to easy-vpn-remote

Hi Team,
I have a communication problem from the vpn-anyconnect to easy-vpn-remote, I´ll explain better bellow and see the attached
topology:
1) VPN Tunnel between HQ to Branch Office - That´s OK
2) VPN Tunnel between Client AnyConnect to HQ - That´s OK
The idea is that the Client Anyconnect is to reach the LAN at Branch Office, but did not reach.
The communication is stablished just when I start a session (icmp and/or rdp) from Branch Office to the Client AnyConnect,
in this way, the communication is OK, but just during a few minutes.
Could you help me?
Bellow the IOS version and configurations
ASA5505 Version 8.4(7)23 (headquarters)
ASA5505 Version 8.4(7)23 (Branch)
**************** Configuration Easy VPN Server (HQ) ****************
crypto dynamic-map DYNAMIC-MAP 5 set ikev1 transform-set ESP-AES-256-SHA
crypto map outside-link-2_map 1 ipsec-isakmp dynamic DYNAMIC-MAP
crypto map outside-link-2_map 65535 ipsec-isakmp dynamic SYSTEM_DEFAULT_CRYPTO_MAP
crypto map outside-link-2_map interface outside-link-2
access-list ACL_EZVPN standard permit 10.0.0.0 255.255.255.0
access-list ACL_EZVPN standard permit 192.168.1.0 255.255.255.0
access-list ACL_EZVPN standard permit 192.168.50.0 255.255.255.0
access-list ACL_EZVPN standard permit 10.10.0.0 255.255.255.0
group-policy EZVPN_GP internal
group-policy EZVPN_GP attributes
split-tunnel-policy tunnelspecified
split-tunnel-network-list value ACL_EZVPN
nem enable
tunnel-group EZVPN_TG type remote-access
tunnel-group EZVPN_TG general-attributes
default-group-policy EZVPN_GP
tunnel-group EZVPN_TG ipsec-attributes
ikev1 pre-shared-key *****
object-group network Obj_VPN_anyconnect-local
network-object 192.168.1.0 255.255.255.0
network-object 192.168.15.0 255.255.255.0
object-group network Obj-VPN-anyconnect-remote
network-object 192.168.50.0 255.255.255.0
object-group network NAT_EZVPN_Source
network-object 192.168.1.0 255.255.255.0
network-object 10.10.0.0 255.255.255.0
object-group network NAT_EZVPN_Destination
network-object 10.0.0.0 255.255.255.0
nat (inside,outside-link-2) source static Obj_VPN_anyconnect-local Obj_VPN_anyconnect-local destination static Obj-VPN-
anyconnect-remote Obj-VPN-anyconnect-remote no-proxy-arp route-lookup
nat (inside,outside-link-2) source static NAT_EZVPN_Source NAT_EZVPN_Source destination static NAT_EZVPN_Destination
NAT_EZVPN_Destination no-proxy-arp route-lookup
nat (outside-link-2,outside-link-2) source static Obj-VPN-anyconnect-remote Obj-VPN-anyconnect-remote destination static
NAT_EZVPN_Destination NAT_EZVPN_Destination no-proxy-arp route-lookup
**************** Configuration VPN AnyConnect (HQ) ****************
webvpn
enable outside-link-2
default-idle-timeout 60
anyconnect-essentials
anyconnect image disk0:/anyconnect-win-2.5.2014-k9.pkg 1
anyconnect profiles Remote_Connection_for_TS_Users disk0:/remote_connection_for_ts_users.xml
anyconnect enable
tunnel-group-list enable
access-list split-tunnel standard permit 192.168.1.0 255.255.255.0
access-list split-tunnel standard permit 192.168.15.0 255.255.255.0
access-list split-tunnel standard permit 10.0.0.0 255.255.255.0
group-policy clientgroup internal
group-policy clientgroup attributes
wins-server none
dns-server value 192.168.1.41
vpn-tunnel-protocol ssl-client
split-tunnel-policy tunnelspecified
split-tunnel-network-list value split-tunnel
default-domain value ipconnection.com.br
webvpn
anyconnect keep-installer installed
anyconnect ssl rekey time 30
anyconnect ssl rekey method ssl
anyconnect profiles value Remote_Connection_for_TS_Users type user
anyconnect ask none default anyconnect
tunnel-group sslgroup type remote-access
tunnel-group sslgroup general-attributes
address-pool vpnpool
authentication-server-group DC03
default-group-policy clientgroup
tunnel-group sslgroup webvpn-attributes
group-alias IPConnection-vpn-anyconnect enable
object-group network Obj_VPN_anyconnect-local
network-object 192.168.1.0 255.255.255.0
network-object 192.168.15.0 255.255.255.0
object-group network Obj-VPN-anyconnect-remote
network-object 192.168.50.0 255.255.255.0
object-group network NAT_EZVPN_Source
network-object 192.168.1.0 255.255.255.0
network-object 10.10.0.0 255.255.255.0
object-group network NAT_EZVPN_Destination
network-object 10.0.0.0 255.255.255.0
nat (inside,outside-link-2) source static Obj_VPN_anyconnect-local Obj_VPN_anyconnect-local destination static Obj-VPN-
anyconnect-remote Obj-VPN-anyconnect-remote no-proxy-arp route-lookup
nat (inside,outside-link-2) source static NAT_EZVPN_Source NAT_EZVPN_Source destination static NAT_EZVPN_Destination
NAT_EZVPN_Destination no-proxy-arp route-lookup
nat (outside-link-2,outside-link-2) source static Obj-VPN-anyconnect-remote Obj-VPN-anyconnect-remote destination static
NAT_EZVPN_Destination NAT_EZVPN_Destination no-proxy-arp route-lookup

Hi,
the communication works when you send traffic from easyvpn branch side because it froms the IPSEC SA for local subnet and anyconnect HQ pool. The SA will only form when branch initiates the connection as this is dynamic peer connection to HQ ASA.
when there no SA between branch and HQ for this traffic, HQ ASA has no clue about where to send the traffic from anyconnect to branch network.
I hope it explains the cause.
Regards,
Abaji.

User provisioning problem from OIM 10g to Siebel CRM

Hi Team,
I am facing User provisioning problem from OIM 10g to Siebel CRM.Please find the log details.
Running Get Attribute Mapping
Running Siebel Create User
<com.siebel.common.common.CSSException>
<Error><ErrorCode>8716601</ErrorCode> <ErrMsg>Socket had incorrect word size: 0.(SBL-JCA-00313)</ErrMsg></Error>
</com.siebel.common.common.CSSException>
        at com.siebel.om.conmgr.Connection.readPacket(Connection.java:550)
        at com.siebel.om.conmgr.Connection.run(Connection.java:286)
        at java.lang.Thread.run(Thread.java:619)
[CMGR FATAL] Error: <com.siebel.common.common.CSSException>
<Error><ErrorCode>8716601</ErrorCode> <ErrMsg>Socket had incorrect word size: 0.(SBL-JCA-00313)</ErrMsg></Error>
</com.siebel.common.common.CSSException> connection:1
<com.siebel.common.common.CSSException>
<Error><ErrorCode>8716601</ErrorCode> <ErrMsg>Socket had incorrect word size: 0.(SBL-JCA-00313)</ErrMsg></Error>
</com.siebel.common.common.CSSException>
        at com.siebel.om.conmgr.Connection.readPacket(Connection.java:550)
        at com.siebel.om.conmgr.Connection.run(Connection.java:286)
        at java.lang.Thread.run(Thread.java:619)
[CMGR FATAL] Error: <com.siebel.common.common.CSSException>
<Error><ErrorCode>8716601</ErrorCode> <ErrMsg>Socket had incorrect word size: 0.(SBL-JCA-00313)</ErrMsg></Error>
</com.siebel.common.common.CSSException> connection:1ERROR,22 Aug 2013 12:58:27,689,[XL_INTG.SIEBEL],====================================================
ERROR,22 Aug 2013 12:58:27,689,[XL_INTG.SIEBEL],com.thortech.xl.integration.siebel.utils.SiebelConnection : createSiebelConnection() : Siebel Connection Exception:Could not open a session in 4 attempts. {1}(SBL-JCA-00200)
ERROR,22 Aug 2013 12:58:27,689,[XL_INTG.SIEBEL],====================================================
ERROR,22 Aug 2013 12:58:27,689,[XL_INTG.SIEBEL],====================================================
ERROR,22 Aug 2013 12:58:27,689,[XL_INTG.SIEBEL],com.thortech.xl.integration.siebel.proxy.SiebelProxyEmployeeProvisionManager : createSiebelConnection() : BaseException: Siebel Connection JDB Exception: Could not open a session in 4 attempts. {1}(SBL-JCA-00200)
ERROR,22 Aug 2013 12:58:27,689,[XL_INTG.SIEBEL],====================================================
ERROR,22 Aug 2013 12:58:27,689,[XL_INTG.SIEBEL],====================================================
ERROR,22 Aug 2013 12:58:27,689,[XL_INTG.SIEBEL],com.thortech.xl.integration.siebel.provision.SiebelUtilEmployeeProvisionManager : createEmployee() : BaseException: Siebel Connection JDB Exception: Could not open a session in 4 attempts. {1}(SBL-JCA-00200)
ERROR,22 Aug 2013 12:58:27,689,[XL_INTG.SIEBEL],====================================================
Regards,
Ravi.

Hi
I facing the same error message as yours, using OIM 11g R2
Are you able solve it ?
Please share
Many Thanks !!!

Mapping problem:from E1EDK14-ORGID to PORDCR102-PUR_GROUP

Mapping problem:from E1EDK14-ORGID to PORDCR102-PUR_GROUP
E1EDK14 occurs 4 times in the source sys:
1   E1EDK14-QUALF = '014'
     E1EDK14-ORGID = 'YP01'      <= purchase organization
2   E1EDK14-QUALF = '009'
     E1EDK14-ORGID = '001'      <= purchase group
3   E1EDK14-QUALF = '013'
     E1EDK14-ORGID = 'NB'      <= document type
4   E1EDK14-QUALF = '011'
     E1EDK14-ORGID = 'C999'      <= company code
I always want to copy "E1EDK14-ORGID = '001'" to PORDCR102-PUR_GROUP.
I have a solution which works but not perfect:
E1EDK14-ORGID=>copyvalue[1]=>PORDCR102-PUR_GROUP
I want to have the perfect mapping as follow:
IF E1EDK14-QUALF = '009'.
E1EDK14-ORGID = '001' => PORDCR102-PUR_GROUP
ENDIF.
I did it in the data flow editor as follow:
/PORDCR102/IDOC/E1PORDCR1/E1BPMEPOHEADER/PUR_GROUP=
ifWithoutElse([keepss=false]stringEquals
(removeContexts(/ORDERS05/IDOC/E1EDK14/QUALF=),
const([value=009])), /ORDERS05/IDOC/E1EDK14/ORGID=)
But the result in the target sys is always 'YP0'(The first E1EDK14-ORGID)
How to solve this problem?
Thanks
ming yu

Hi,
Try like this.
E1EDK14-QUALF   --------
Constant(009) ----------------   EqualsS ---------------
                                                             And(Boolean Function)     ------ IfWithoutElse -- PORDCR102-PUR_GROUP
E1EDK14-ORGID -------                                                      E1EDK14-ORGID ----------------
Constant(001) --------------   EqualsS ------------------
Regards,
P.Venkat

Aperture Video Import Problem - from Lumix GH4: Imported clips have their dates changed to the import date. The files show up on the hard drive but many are not showing up in Aperture.

Aperture Video Import Problem - from Lumix GH4: Imported clips have their dates changed to the import date. The files show up on the hard drive with import date not created date, but many of these same files are not showing up in Aperture. Sometimes the clips actually show up with the current import but take on the video information from a previously imported file.

It was suggested I move this question to IPhoto or IMovie which I did.
Well moving to a different discussion group did not provide an answer to this question either. But what I finally did was import one batch of photos and videos into IPhoto for a given day at a time. Working with these I could change the date and times in order to get them in the original sequench taken. Then I would create an album with that batch. These would all be on the same day (IMove was closed for this phase). Then I would open IMovie, generate the thumbnails for that album, and select the album I had created. This was necessary because the importing process in IPhoto was using incorrect dates for my video so it was a real struggle finding them in IMove until I developed this approach.
I believe that this whole process was so screwy because I was importing from an external hard drive not a camera. I had these photos on a PC and did not have the original cameras to use to import directly which I am fairly sure would have made this easier!

When I'm trying to download an app, it says that I have a billing problem from an earlier purchase so I can't download anything. How can I fix it?

Whenever I try to download or redox load an app, a sign says I need to sign in. I do, but it then says I have a billing problem from an earlier purchase and I don't have money on the card so I can't put anything even though I tried. How can I get rid of the card on my ipod??

Sounds like you have an outstanding balance. You have to pay that of before you can make purchases, even free ones. Add a valid payment method to your account
Why can’t I select None when I edit my payment information?
If you want to contact iTunes
Contact iTunes

Printing Problem from ALV

Hi,
When I run my report, its perfectly working fine with all the data, subtotals, grand totals etc.
But when I print the ALV by clicking the PRINT Button on the Standard tool bar, My first subtotals are printing correctly. From second, its printing ZEROES and my grand totals are printing double the number as I see on the output.
This is strange and am not able to understand why I get those errors.
ANy pointers please.
Thanks,
Kiran
Edited by: kiran dasari on Sep 9, 2009 1:04 AM

Hi Roger,
I am using Function Module "REUSE_ALV_HIERSEQ_LIST_DISPLAY"
I am displaying a hierarchical ALV with subtotals, page-breaks & grand totals.
The strange thing is that my first SUBtotal gets printed properly. Its the problem from the second subtotal onwards.
Finally, the grand totals also a problem(Doubling when i print first time and triplling,if i print 2nd time ...and so on...)
ANy more clues please.
Thanks,
Kiran D

Video transfer problem from pc to ipad A1219

video transfer problem from pc to ipad A1219

ArinC
You have posted your issue in Using Apple Support Communities whose topic is 'How to use this forum software's interface, features and/or how to find what you wish'. It is a relatively low traffic and inappropriate forum for your problem. I will ask our Hosts to move it to " Using iPad " where it may get a more rapid response from your fellow users.
best luck
ÇÇÇ

I have a problem, from system test says: Error 4mem/61/400000000:0x8444fb98, I know how you can solve. Thanks

I have a problem, from system test says: Error 4mem/61/400000000:0x8444fb98, I know how you can solve.

If you have Apple Care for that computer, give them a call: Apple's Customer Support - in the US, (800) 767-2775
If you're not sure how to handle the situation, consider walking your MB into the nearest Apple Store and asking someone there to take a look, etc.
Good luck in any case.

Boss has a 3G having syncing problems from iphone calendar to laptop calendar. Any suggestions?

Boss has a 3G having syncing problems from Iphone calendar to laptop caledndar.

We run Windows 7 here at work and when she goes to sync her iphone calendar to her laptop calendar some of the information is not transferring over. Yesterday we synced and everything was correct on both calendars but when we went back in today there were missing appts on the laptop calendar that were synced yesterday.

Will Apple provide solution to those with problem from updating to iOS 4.0

My iphone 3GS is still dead from updating to iOS 4. Its almost coming to a week already. Can Apple offer some official help to those of us with such problem?
Really appreciate if apple would do something to help.

I did the update to for itune to 9.2 .
Then check for update for iOS 4.0 for iphone.
after that I sync my iphone to itunes and did the updating to my iphone.
update failed to complete and phone is stuck in recovery mode.
is that clear enough?
U can also see many with such problems from this post
http://discussions.apple.com/thread.jspa?threadID=2469544&start=0&tstart=0

Layoff pulldown problems from 23.98 DV timeline

Similar Messages

Maybe you are looking for