Layout baisc settins like page format not allowedin dev 100 client.....!!!

Hi all,
i have copied standard lay out set in to Zform in client 100 (Dev).
now i m trying to change it's page fornat ( like Landscape Format).
It is not allowing to change  or display Zform basic settings (Attributes) in 100 . it is giving message "Language En Locked original Language DE Being Processed".
pls check & revert.

hi,
While downloading form from client 000 to 100 first u should cange langauge,
than procees the form.
Here THERE is navegation to convert language from DE to EN.
whn down loading process is complited  than open form in DE language itself than whn u r entering into first screen in cange mod GOTO UTILITIES inthat there is one options called COnVERT origbal language in that make cahges to language DE to EN than it will work out.
Thanks.
Patil

Similar Messages

  • Basic html page will not display for my client!

    I have built a new website for a client, and I have plonked
    it in a folder on his server so that he can view it without it
    being live, but when he views it from his office, the url (which is
    correct) loads a page stating that the page could not be found. I
    have loaded a preliminary design on a different server, and he can
    see that. (Just to clarify, I have loaded it on his server because
    his server will display php, my servers are windows and don't do
    php, that's why it's a preliminary design on my server)
    Everybody I have sent this url to can see the new site design
    in the sub-folder, it even works on my iPhone, but none of his pc's
    in his office can get to the page. Any ideas as to why? As a test,
    the home page is currently very basic html, it simply says in h1
    'Can you see this?' but still no joy.
    There must be something he has on his system that stops his
    network for accessing new files on his own website, but what?
    Thanks
    Mat

    matthew stuart wrote:
    > I have built a new website for a client, and I have
    plonked it in a folder on
    > his server so that he can view it without it being live,
    but when he views it
    > from his office, the url (which is correct) loads a page
    stating that the page
    > could not be found. I have loaded a preliminary design
    on a different server,
    > and he can see that. (Just to clarify, I have loaded it
    on his server because
    > his server will display php, my servers are windows and
    don't do php, that's
    > why it's a preliminary design on my server)
    >
    > Everybody I have sent this url to can see the new site
    design in the
    > sub-folder, it even works on my iPhone, but none of his
    pc's in his office can
    > get to the page. Any ideas as to why? As a test, the
    home page is currently
    > very basic html, it simply says in h1 'Can you see
    this?' but still no joy.
    >
    > There must be something he has on his system that stops
    his network for
    > accessing new files on his own website, but what?
    Could it be a Firewall issue?
    Dooza

  • Page format not able to set  in spool - Using - GET_PRINT_PARAMETERS

    Hi Friends,
    I am calling transaction using BDC.
    Before that I have  called function  GET_PRINT_PARAMETERS
    to set the layout . And used the command
      CALL FUNCTION 'GET_PRINT_PARAMETERS'
        EXPORTING
          copies         = 1
          cover_page     = '2'
          destination    =  g_spld
          layout         = 'X_65_200'
          line_count     = 65
          line_size      = 200
          mode          = 'BATCH'
          new_list_id    = 'X'
          no_dialog      = ' '
          release        = ' '
          sap_cover_page = 'X'
        IMPORTING
          out_parameters = print_parameters
          valid          = valid_flag.
    For creating the new page
         NEW-PAGE
                   PRINT ON
                     PARAMETERS print_parameters  NO DIALOG.       
    Now at this point i have called the BDC. Here I am able to create spool id. But the strange thing is  spool is not using the layout  'X_65_200' .But using the default layout as 'X_65_80'.
    Can you help me out to solve this problem. Or any other way to  overcome this.
    Thanks..

    Hi Jishi,
    just one question why are you trying to set exchange profile on r3 system?
    "The exchange profile is an XML document that is stored in the main database of the SAP Exchange Infrastructure"
    from:
    http://help.sap.com/saphelp_nw04/helpdata/en/89/6f1741b393f26fe10000000a1550b0/content.htm
    you do not set it in R/3 systems...
    Unless I'm wrong...
    Regards,
    michal

  • Date format not recognized -- urgent help needed

    Hi,
    I'm having a problem when start sqlplus in dos command window. If I start it from C:\oracle\ora81\bin, it won't started and error message showing like 'Date format not recognized' and then come back to DOS.
    I do have OWB installed which also has SQLPLUS installed so that there is no problem if I start it from C:\ORACLE\owb92\bin.
    For some reason, the path is setting as C:\oracle\ora81\bin before C:\ORACLE\owb92\bin so the default always goes to 81 folder.
    If restart the DB instance, and this problem is gone. But it comes back after some application running (our own application and Oracle provided OMBPlus ). We double check our own application, and there is no where to "alter session ...".
    Any help will be very appreciatged,
    Thanks,
    Daming

    I'm having a problem when start sqlplus in dos command window. If I start it from C:\oracle\ora81\bin, it won't started and error message showing like 'Date format not recognized' and then come back to DOS.
    Do you have a file called 'login.sql' in the folder 'C:\oracle\ora81\bin'? If there is one, is there an 'alter session' command in this file?

  • Pages does not show any window

    Forum,
    when I start Pages everything looks fine. All menues ar present but I cannot open any window. Doubelclicking a Pages document starts pages but without a window.
    Lokking to my logs I can find:
    17.12.07 00:29:19 Pages[24620] -[SLPublicationWindowController loadWindow]: failed to load window nib file 'SLPublicationWindow'.
    Beide of that have a constan message in my logs but I do nor know if it belongs to my problem:
    17.12.07 00:29:20 com.apple.launchd[1] (org.postfix.master[24621]) Exited with exit code: 1
    17.12.07 00:29:20 com.apple.launchd[1] (org.postfix.master) Throttling respawn: Will start in 9 seconds
    Does anybody know what is happening?
    Thanks Oliver

    I have noticed that pages was running on my German test account. After reducing Pages in the "Info" box to just one language (German) everything is fine. I am using English OS. Seems like Pages does not like multiple international language settings when running an English OS....
    Oliver

  • I am a teacher and I would like to format my page in PAGES to have lines...similar to that of lined paper. Is this possible?

    I am a teacher and I would like to format my page in PAGES to have lines...similar to that of lined paper. Is this possible?

    Hi Jay,
    I've played with this before, but I was never happy with the result. I gave it another shot to answer your question, and I'm pretty pleased with this result. I'll say that you have a lot of latitude for adjustments in this template, so don't take it as being restrictive to what I'm illustrating. For instance, you can easily vary the line spacing, the weight of the lines, the color, etc.
    In this example, the pitch of the lines is 32 points per line, blue stroke, and I placed a light yellow shape in the background. Here's the approach...
    Open a blank Word Processing Template.
    View > Show Layout.
    Pages Preferences > Rulers > Ruler Units: Points.
    Insert > Table.
    Set the Table to 1-column, 0 Header Rows, and Footer Rows, Row Height = 32 points.
    In the Wrap Inspector, set the table to Floating, and Does NOT cause Wrap.
    Align the Top Left of the Table with the top Left of the Text Area.
    Increase the Column Width until the single column extends all the way across the Text Area.
    Increase the number of Rows until the table just fills the vertical Text Area of the page layout, plus one row..
    Set the Outside Cell Borders to None.
    Set the Mid Horizontal borders to Blue.
    With the entire Table Selected, Arrange > Send Object to Background. Format >Advanced > Move Objects to Section Master, Arrange > Lock
    If you want the colored background, Insert > Object > Rectangle. Graphics Inspector > Stroke > None. Color > your choice.
    Stretch the Shape to cover the entire page size. Arrange > Send Object to Background. Format > Advanced > Send Objects to Section Master.
    If the colored object is obscuring the lines, then: Arrange > Send Backward. In either case, Arrange > Lock.
    Paste a good size paragraph (several lines) into the document.
    Select the text. In the Text Inspector, set line spacing to Exactly and 32 Points.
    Inspect the alignment of the Text and the Lines. If you are not pleased, Select the Table and bump it up or down with the vertical Arrow keys.
    If you are satisfied, with the overall effect, Select all the Text and Type: Click here and enter text. Select the text "Click here and enter text." and Format > Advanced > Define as Placeholder Text. Lastly, File > Save as Template.
    As I mentioned at the outset, you can easily modify these instructions to increase or decrease the number of lines per page, the type size, etc.
    If you want to email me, I'll send you a copy of the template I displayed here.
    Regards,
    Jerry

  • Physical page is not the same in HTML format

    I am using Oracle 6i to develop some reports. While running this reports using the developer, the logical page is the same size as the physical page.
    When generating the same reports in HTML format the physical pages do not seem to be the same as the logical pages, since the contents of one page is being printed in two pages, whereas using the developer the report will print only in one page. I look at the Layout Model properties and I have set it in the following way :
    Layout Main Section
    Width : 8.5
    height : 11
    Horizontal Panels per PAge 1
    VErtical Panels per page : 1
    Orientation Default
    Report Width : 80
    Report Height : 66
    Any Help will be appreciated

    Open you QuickTime movie, go to window and select Show movie properties, select videotrack and change Transperancy (low left) and select Composition in stead of "none - allow dithering" from the drop menu. See if this helps.

  • How can I save a page and all its component parts in a single file, like IE does as an MHT - it's much easier for mailing to people where page address not available?? (as in output from an airline booking site, for example)

    how can I save a page and all its component parts in a single file, like IE does as an MHT?
    It's much easier for mailing to people where page address not available?? (as in output from an airline booking site, for example)
    It is simply too painful to have to zip everything up into a single file to send. MHT format has been available for years now from IE, and with every new FF release it's the first thing I look for. I have been using FF for years, and hate having to come out of it, over into IE |(which I even took out of startup) and key everything in again, in order to send somebody something in a convenient format that they can open with a single click.
    I can't believe this hasn't been asked before, so have you looked at it and rejected it? Have MS kept the file format secret?
    Thanks
    MG

    This is not really an answer just my comments on your question.
    I am sure I recollect efforts being made to get mhtml to work with FF.
    Probably the important thing to remember about .mhtml is that if other browsers do support it they may need addons, and may not necessarily render the content correctly/consistently.
    There are FF addons designed for archiving webpages, you could try them, but that then assumes the recipient has the same software.
    You could simply save the page from FF to your XP pc; then offline open it with and save it using IE, before then emailing using FF, and attaching the .mht or mhtml file that you have now created on your PC.
    As an alternative method, in some cases it could be worth considering taking a screen grab of the required page, then sending that to the recipient as a single email attatchment using either a bitmap or jpeg file format for instance.
    Something such as an airline booking may be designed with a print option, possibly it could be worthwile looking at sending the print file itself as an email attachment.

  • Page format for SAP-Script not working in 4.6C

    Hi all,
    I have a problem regarding check printing.
    I am using SAP version 4.6C
    The size of paper for check printing is
              width  = 231 mm
              Height = 304 mm
    So for this I have created a new page format with these details in SPAD.
    Then I assigned this Page format to spool format and assigned that spool format to SAPWIN driver. I have assigned this page format to the SCRIPT that is used for check printing .
    But when I am taking the print out for the check with new page format, the printer don’t print till the end of page, it prints till the total amount on check and then stops there. So this creates an alignment problem when taking printout for multiple checks.
    Please give some solution for this.
    Regards,
    Bharat.

    I guess you are printing on dot matrix printer. If yes, try to do some physical printer settings for the dot matrix printer by following the printer manual. I guess you have to change the page size.. or set default printer settings... it may help you to solve your problem...
    if not goto your device types tab in SPAD and select device types.. select your device from the list (for ex, SAPWIN) click format and goto the format that you have inserted for this device types.. double click on your format, you will see printer Indialization.. try to write code like this
    set page length to 8.5 inch (=52 lines at 6 LPI)
    \e\0x43\0x44
    Note the above hexa decimal value can be obtained by going through the printer manual.
    Close the thread once your question is answered.
    Regards,
    SaiRam

  • Cc cleaner has altered page layout, missing buttons, pictures not shown with txt but below, certain pages also not now intertactive..cannot scroll and over buttons and click to enable choice. help to

    Hi, Please help.
    I'm currently using Firefox v4.0.1, which I like and am happy with, as it allows me to use my Kaspersky link filter and virtual keyboard.
    Anyway, I recently decided to clean my registry and history using cc cleaner.. I did not back up as I had never experienced problems before. Once cc cleaner had finished and I opened Firefox I noticed that my two home page layouts had altered. The Supanet home page is now all disjointed, buttons are scattered to the left and right of the page, where once they where side by side, all of the images and text seem to be beneath each other and instead of one page i now have to scroll down and down to the full page, all text and image seem to be left margin.
    On the google home page certain buttons are there but the text within has disappeared, although the buttons work, a search for Mail online through google..(or Supanet home page) is not a problem, however, once we arrive at the site it pretty much displays the info in the same layout/manner as the Supanet hompage. Further more certain buttons on other sites are no longer interactive..eg, Asda voucher print out. i do not wish to update to other version of firefox as i would lose Kaspersky buttons..so please help..I've tried everything..even re installing version 4.0.1..Help, I now it must be simple..but I'm not a techie!! Many thanks!

    Create a new profile as a test to check if your current profile is causing the problems.
    See "Basic Troubleshooting: Make a new profile":
    *https://support.mozilla.org/kb/Basic+Troubleshooting#w_8-make-a-new-profile
    There may be extensions and plugins installed by default in a new profile, so check that in "Tools > Add-ons > Extensions & Plugins" in case there are still problems.
    If that new profile works then you can transfer some files from the old profile to that new profile, but be careful not to copy corrupted files.
    See:
    *http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox
    Please update Firefox to the latest version via "Help > About Firefox" or "Help > Check for Updates"<br />
    The Firefox Firefox 4.0.1 version that you currently run is no longer supported with security updates.
    You can find the latest Firefox release in all languages and for all Operating Systems here:
    *Firefox 9.0.x: http://www.mozilla.org/en-US/firefox/all.html

  • Pages does not preserve the layout in Word

    On opening Word with Pages, the layout is not preserved
    Word has navigation pane for navigation between the headings but Pages seems not to have
    There are many details in layout that are not preserve,f ex the pages have different number of words etc
    I would like to know what features are not preserved

    "Perfect" is an overstatement. It is in fact completely messed up in particular with long documents.
    The problem is that I could not move Word documents to iCloud. I have to use pages.

  • Initial-page-number not working in RTF format output

    A report has a parameter for the page number to start with. In rtf template below code is present
    <?initial-page-number:xdoxslt:ifelse(P_FIRST_PAGE_NUM!=’’,number(P_FIRST_PAGE_NUM),1)?>
    The report page number starts with the value which we pass in p_first_page_num in PDF format but in rtf format output it always starts with 1.
    Is initial-page-number not supported in RTF format output ? If not then what is the alternative?

    the method u followed is fine as need a page number staring from a specify value which u input.
    @section is only for resetting page number to 1 for every group and for that pdf and ppt will be fine but only for rtf u need to use that ( pressing F9).
    u can use @section and initial page number combined but they give u same output as get now. rtf output wont support it will only reset 1 every time
    What ever u do rtf output wont support initial page number code ..........
    i mentioned that F9 work around to mention that it is the only work around u have upto now to control rtf output with regards to page number.
    Guru's correct me if i am wrong. wait for a day or two if some one from guru's confirm it .
    If u need real confirmation raise an SR oracle will let u know .

  • "Output could not be issued" when using custom page formats

    Dear all,
    I created a custom page format using SPAD. Its dimension is 7.5cm x 10cm (190mm x 254mm). I also created this page format in windows and set as the default paper size in my printer. However, when trying to print a smartform using this size, the message "Output could not be issued" is given. When I use the standard paper sizes (e.g., LETTER, DINA4), the form prints OK.
    Can you point me to the direction to solving this?
    Thank you!
    Kyle

    Issue resoved.
    For those who are encountering the same problem, here's what I did. I tested the smartform by itself and it reported the specific error: the page format is not supported in device type SWIN. I added it in another device type SAPWIN. This was just a simple miscommunication between the admins and the developer. I added the format in SWIN and everything works fine.
    Kyle

  • I am working in Pages and am trying to have the same footer on every page ?I went into View/Layout and typed in footer text  in the space but it only appears on first page and not any subsequent pages? Thank you.

    I am working in Pages on a report and trying to have the same footer on each page. I went to View/Layout, followed instructions, but the footer text only appears on the first page and not any subsequent pages? What should I do differently please? Thank you., Elisabeth

    Help is in the Pages forum.

  • Pages is not saving document correctly.  After saving the changes either do not appear or you can not open the file. The error is "not a valid format"  I am in Pages '09 4.1 (923).  I also use Parallels.  Anyone having similar issues?

    Pages is not saving document correctly.  After saving the changes either do not appear or you can not open the file. The error is "not a valid format"  I am in Pages '09 4.1 (923).  I also use Parallels.  Anyone having similar issues?

    I'm not sure that Lion AutoSave feature apply to network servers.
    I'm just sure that the Versions feature doesn't.
    Yvan KOENIG (VALLAURIS, France) samedi 21 janvier 2012
    iMac 21”5, i7, 2.8 GHz, 12 Gbytes, 1 Tbytes, mac OS X 10.6.8 and 10.7.2
    My Box account  is : http://www.box.com/s/00qnssoyeq2xvc22ra4k
    My iDisk is : http://public.me.com/koenigyvan

Maybe you are looking for