Layout BPS

Hi all,
I need to put in my BPS-layout in lead column both characteristic and key figure and in data column only a characteric.
Example:
Insert in lead column 0CUSTOMER and 0QUANTITY
Insert in Data column OCALMONTH
How can I do it?
Thanks in advance
Gianmarco

Ciao,
i think I have lost track what you want to do.
Maybe we start with general answers first.
the most flexible layout will be possible using key figures only in columns.
then you are able to select several characteristics for the rows (key column) and you can define "selected key fiures" in columns
If you want for whatever reason to put your key figures in rows, you are somewhat restricted.
Together with key figures and always for columns you are able to select only one characteristic as flexible.
All other characteristics can then only be put into the selected key figures.
I hope this helps.
If not, then please list your full requirement.
Which are the key figures, which are the chars, whicht you want to use where in your layout and can you select single values for the chars or do you need it to be flexible.
Ciao
Cornelia

Similar Messages

  • Planning layouts (BPS) - Performance

    Hi,
    Our Planning layouts (BPS) take lot of time (about 5 to 10 mins) to open. Any suggestions to improve the performance?
    Thanks,

    Hi,
    activate BPS_STAT0 and check how much time is lost in what areas. Typical pitfalls:
    - Bad level restrictions in the functions running on layout display (Hi Stephen!)
    - Bad programming in data slices or characteristic relations, which are checked per cell
    - Bad programming in exit variables used in the levels
    Regards,
    Andreas

  • Facing problem in Layout-BPS 4.O

    Hi All,
    I am facing one problem in BPS Layout...
      The problem: Some Company codes are valid entire the year and some company codes are not valid entire the year (valid few months in a year)
    (Ex:Comp Code:ABC(Valid thru 01/2008-12/2999) and
    Comp Code-XYZ(Valid thru- upto 07/2008 only)
    In a layout i am entering the two above company codes data  on 10/2008, when i click the refresh button  the data it's gone from my layout (two company codes data),but it is showing an error message like Company code XYZ is not exist in 10/2008 this is fine but i don't want to clear the my layout .what i entered the data in my layout keep same but in this case it is not working.it's clearing the entire data in layout.
    For validation of comp codes i am using char relation ship.the code it is working fine because it is throwing an error message.
    How can i keep the valid data  in my layout after refresh(after validation),even i'm not clearing the not valid data also,automatically cleaning the entire data.how can i resolve this problem
    Any inputs and suggestions please..
    Thanks,
    Siri N.

    Hello Siri
    The problem is that for time-dependent master data, the system is using a 'key date' field (set up for the planning area) to check which master data to make available for planning. If this 'key date' field has been left blank the system is using the current date to check which master data to select. The system is selecting the master data where the current date falls within the validity period.date (i.e. 'valid from' date is less than or equal to 'current date', 'valid to' date is greater than or equal to 'current date').
    Using your examples
    (Ex:Comp Code:ABC(Valid thru 01/2008-12/2999) and
    Comp Code-XYZ(Valid thru- upto 07/2008 only)
    On 13/11/2008 you would be able to view/plan data on ABC because the current date falls within the validity period but you would not be able to view/plan data on XYZ.
    What you can do to allow viewing/planning on both ABC and XYZ.
    1) In the planning area enter a key date e.g. 01.07.2008 that falls within both intervals. Not a very future-proof solution.
    or
    2) In the master data of XYZ change the validity date so that the 'valid to' date is greater than or equal to 'current date' e.g. valid to 31.12.9999. Again the business may not like to extend the validity date like this. 
    Unfortunately the 'key date' field allows only a specific date to be input (or leave blank). Ideally if it allowed a variable, then you could have set up a variable that for example derives the first date of the year being planned or the month being planned.
    We are having a similar issue with planning on time-dependent master data. We are logging the issue with SAP so that if possible they can create a variable or customer exit that can derive the key date from the period being planned.
    S

  • Selection in layout BPS

    Hi all,
    In BW-BPS I create a layout with Key figures in Data Columns and I need to restrict key figure to some characteristic value.
    For example I put in data columns 0QUANTITY and 0SALESORG. I need to restrict 0QUANTITY with value 01 and 02 of 0SALESORG.
    For do it I create a variable related of 0SALESORG with replacement type fixed value 01 and 02 and in second screen of the layout builder I add this variable for restrict 0QUANTITY but I receive the following error message:
    Variable is not a single value. It cannot be used
    Message no. UPP_LB075
    I work in BW3.5.
    How can I do please?
    Thanks a lot
    Gianmarco

    Hi,
    This is correct. For a layout, you need to restrict each characteristic to a single value. You cannot have two values for the same column for one characteristic. Use a single value for each data column.

  • How to remove the rows "1/Not Defined" in Layout BPS, using bps_wb

    Hi all! I have no much experience in SAP-BPS, but I have just created a layout using BPS and BPS WB.
    I have some trouble, and I expect you can help me. In the layout, I have a table with categories and subcategories, and I put hierarchies to view totals for each category. (and also, to collapse/expand for each category). But I have some problems, a row named "1/Not Defined" appears in each category. How can I do to remove this row??
    Thank you

    Hi Dirk,
    Thank you for you reply. I'm trying to do what you say, but an error message says:
    "Characteristic 'Category' does not contain the initial value in the selection". And In more detail says:
    "You set the indicator 'Planning in characteristic hierarchy' in planning layout 'SALES'. All characteristics of the lead column must contain the initial value in the selection in this mode. However, characteristic'Category' does not contain the initial value in the selection"
    So, I thinkk is not possible to exclude # value.
    Thanks,
    Xavi

  • Variable in layout BPS

    Hi all,
    I restricted the characteristics in my layout with a variable user value e without selection in level.
    When I try to start layout I receive the following message:
    Variable ZTDOCV is not a single value. It cannot be used
    I don't want to restrict with a single value, but I need a range.
    How can I do?
    Thank you
    Gianmarco

    Hi
    Planning is always done for unique combination of characteristics master data. It is not possible to post the values for range of values For eg -
    Company code range selected in the variable- 1000 to 3000, in this case you cant post any key figure for company code 1000 to 3000.
    Again it depends on - how you structure the layout. If your characteristics is placed flexibly in row or column structure, then following may happen - eg - company code
    in case of Row
    company code        Amount
    1000                       £ 400
    3000                       £ 600
    in case of column
    Company code     1000            3000
    Amount              £ 400           £ 600
    In of header
    only one value allowed for planning.
    If above is the case in your planning layout, then try to set the variable in BPS0, then it will pick the selected range in the layout.
    hope this helps.
    Regards,
    MJ

  • Hierarchy Exit variable in BPS

    Hi,
    I have a pb:
    I have a hier  (ZHIER) based on InfoObject YIndic:
    - Node : Text node
              - Region : Characteristic node (char: Yregion) ex: 1
                       - Dpt: Text node   ex: 1P2
                              - Indic : Characteristic node (char: YIndic)
              - Region : Characteristic node (char: Yregion) ex: 2
                       - Dpt: Text node ex: 2P3
                              - Indic : Characteristic node (char: YIndic)
    In planing Layouts (BPS), I'd like to display only Indics related to the Dpt and the region of the user. So I'd like to use a Hierarchy Exit variable to take the right node.
    I wrote the following code (I replaced working variables by real values):
      ls_hiersel-chanm = 'YINDIC'.
      ls_hiersel-hienm = 'ZHIER'.
      ls_hiersel-nodename  = '1P2'.
      ls_hiersel-hiever   = 'A'.
      ls_hiersel-hiecha   = '0HIER_NODE'.
      ls_hiersel-dummy_leaf   = ''.
      ls_hiersel-dateto   = '99991231'.
      CLEAR ls_chadep.
      ls_chadep-chanm = 'YREGION'.
      ls_chadep-chavlint = '1'.
      APPEND ls_chadep TO ls_hiersel-to_chadep.
      INSERT ls_hiersel INTO TABLE et_hie_nodes.
    ENDFUNCTION.
    My problem is that when I launch my layout, the system tell "the node 1P2 doesn't existing" but node is effectively existing. I thing that BPS doesn't know where to search my node but I took this piece of code from another function and I don't know how to tell to BPS where to search the node. It's maybe at the end of the code but I'm a Beginner in ABAP.
    Can anybody can help me please?
    Many thanks.
    J Sorel

    Thanks for your help.
    Could you explain me please what does the code I wrote and your modification (I have not tried yet)?
    I took this piece of code from an existing function module but due to my Abap level I can't understand what I do. I think that BPS doesn't undertands where (in which level) to search the node. Is there in the code you wrote an information related to the level where the node is?
    Many thanks
    Sorel

  • Table names required in BPS

    Hi ,
    Can anybody please tell me the table names from where i can find the following information ?
    Planning folder names
    Planning profile
    Planning layout
    BPS  programs
    FOX functions
    exit function
    I had a look at the UPC_* , UPS_* tables but couldnt identify the above mentioned objects .
    Regards
    Ankush

    Hi,
    These are the tables
    UPC_PROFILE - Planning Profile
    UPB_PS_PROP - folders
    UPP_PARAMT - plng layouts
    UPF_PARGD - Plng functions
    TFDIR - Exit functions
    Regards,
    Bindu

  • LIST OF VALUES not Populating in BPS WEB INTERFACE ( LAYOUTS )

    Hi BI Guru's
    I have created a WEB interface for BPS in BI ( version 7.0) .  But when i execute this in internet explorer, I do not get the LIST OF VALUES for Material. 
    When I click on "input help" the system open a new window for "Value selection".  When I specify the material code, it gives me blank LIST OF VALUES.
    But it is working for other fields like Customer, UOM in the same layout.
    Please suggest some solution.
    Thanks,
    Nilesh Labde

    hi,
    Thanks for the reply.
    Master data is avaliable for the Material Code.  The problem is in Internet Explorer and not in SAP GUI .
    If i run Planning folder for the same layou in SAP GUI it is working fine.

  • CRM fields not populating in BPS layout for opportunity Planning 0crm_order

    Hello Support,                                                                               
    We are using SAP CRM 5.0 SP09 with BW 7.0 SP 09.                                                                               
    When creating an opportunity in CRM, the product data ( quantity ,
    values) are not appearing in Planning tab( SEM-BPS Layout) .                                                                               
    Kindly let us know what needs to be done to resolve this issue.    
    Thanks and regards,                                                
    Rajiv Jain

    In your CRM system, check your mapping from CRM to BW are correct.
    You can do this in transaction SPRO. Menu path 'SAP Implementation Guide --> Integration with other mySAP components --> SEM --> Change mapping between CRM fields and InfoObjects'. Select planning application 'OPP' and click on 'Mapping table - system entries' on the left.
    In here you should see the mapping from the InfoObject to the CRM field (eg. Infoobject 0CRM_EXPREV uses structure CRM_BW_OPPT_H and field name EXP_REVENUE).
    In order for the value to be passed to planning you must tick the 'Empty' checkbox on.
    Regards,
    Adrian

  • Interactive restriction on key figures in BPS layout

    Hi Experts
    I know you can define planning level/packages/layout header with variables to define selection criteria of characteristics for layout, but is it possible to define selection criteria on key figures? e.g. only show the data in layout with amount larger than a user input value (100 or any other amount you may input) when executing the layout?
    Or I can define "condition" in BW query, and use this query for input layout for BPS? Because I know in NW04s BPS can use BW query as input layout.
    any idea?
    Thanks Patrick
    Message was edited by: Patrick Yan

    Hi,
    In BW-BPS, i don't think it is possible to achieve this as there is no option to define conditions.
    thanks

  • Problem adding a new field to existing BPS planning layout

    Hi
    I am new to BPS and planning
    I have a requirement to add a new field which has values maintained as 0 and 1 to an existing planning cube.The user wants this new field in the existing planning layout where in he can enter the values for this field as 0 or 1.I have created a new field and maintained values for this field as 0 and 1.I have added this field to the existing planning area and have created variable with fixed value with range 0 to1.I have added the same in selections in existing planning level and package as well along with other existing selection conditions.
    In additional functions of adhoc package they have made setting as set to all possible char combination.
    In this planning area all the selections are locked in planning level and package.
    Now when i execute the planning layout to enter data,my new field is grayed out,it does not allow me to enter the values.need help  with this as to how can i make this field input enabled.This is an independent characteristic.
    Thanks
    Panchan

    Hi,
    Yu need to delete the data to fill the new field again.
    Assign points if it helps
    Regards,
    Srinivas

  • Navigate from WebDynpro Application to BPS Layout and vice versa

    Hi,
    Please see the following Problem Statement:
    We have WebDynpro applications and BPS applications in our project. All the applications are published via SAP Portal. Both areas (WebDynpro and BPS) have same selection screen (Selection fields are common). Is it possible to call
    WebDynpro application from BPS layout (on click of button)and also passing the selection parameters to the WebDynpro application and vice-versa.
    - Sujal Shah

    Hi,
    You can you free tool from Oracle called OMWB (Oracle Migration Workbench) for SQL Server to Oracle.
    For more details, visit http://www.oracle.com/technology//tech/migration/workbench/index.html
    From Oracle to SQL Server, there are third party tools available.
    Cheers,
    Harshw
    Message was edited by:
    [email protected]

  • Variable Range not working in BPS-Layout.

    Hi BI Guru's,
    I am facing Problem in BPS - Layout.
    My requirement is to get YTD Budget Quantity in Single Coulumn. For Example, I need Quantiy for the Period 001.2009 to 12.2009 in single Column as Budget YTD 2009.
    For this I defined a variable on the Planning area, with the characteristics "fiscper" and in the selection condition i entered the range 001.2009 to 012.2009, but when i executed the layout it is showing the quantity for the perios 001.2009 only and not for the entire range.
    I tried with the User Exit also, where i copied the standard function module "UPF_VARIABLE_USER_EXIT"  to 'Z' function and modified to my requirement.
    Following is my Code for the Function Module
    clear eto_charsel.
    data ls_charsel type upc_ys_charsel.
    clear ls_charsel.
      i_area = 'ZUCOPA'.
      I_CHANM = 'FISCPER'.
      i_variable = 'ZACTDYTD1'.
      ls_charsel-chanm = i_chanm.
      ls_charsel-seqno = '1'.
      ls_charsel-sign  = 'I'.
      ls_charsel-opt   = 'BT'.
      ls_charsel-low   =  '2009001'.
      ls_charsel-HIGH   = '2009012'.
      insert ls_charsel into table eto_charsel.
    But the after using the Function Module in the User Exit area of Variable also, I am getting the Quantity for the Period 001.2009 only and not for the entire range ( 001.2009 to 012.2009 ).
    Please suggest some solution ASAP.
    Thanks in advance.
    Regards,
    VD.

    Hi Marc,
    Thanks For your Reply,
    I changed the Layout as suggested by you, where i have now 12 columns for Budget Quantity and a Total column( C1C2....C12).
    I do not want to show this 12 column and instead want to show only the total column, so I hide this columnn's in the change layout but after saving the layout these columns again appear in the layout.
    How do i hide these columns in the layout????
    Thanks
    VD

  • BW authorizations in BPS layout

    Dear all,
    My question may seem basic, but I don't have any experience with authorizations.
    I need to use already existing BW authorizations in my BPS layouts, so well, I created auth. variables on the needed characteristics and assigned it to my layout.
    ==> nothing changes when I'm launching the layout.
    I wonder if I need to ask the modification of the already existing BW roles in order to add field ACTVT? Will this have an impact on already existing BW reports for the users?
    Also, does something need to be done in RSSM (or other T-code) in order to activate the auth. for my planning cubes?
    Thank you in advance for your help!!

    Ravi,
    The objects you mentionned talk about area, planning, etc,... so they are usefull when a user wants to launch a layout in order to let him launch/plan it or not, etc... . That's the first step, and that doesn't interest me.
    Second step is that when launching, the user will get his layout. This layout will be generated regarding the design I made in BPS0 and then also the variables I've used.
    If I've restricted my planning level by using variables of type authorization on an char. that is in the lead column of my planning layout, it should restrict the diplayed/available rows regarding that authorization (ex : only company code 1000 for user A; company code 2000 for user B ; company code 1000 and 2000 for user C ==> coming from reporting authorizations in BW)
    So I really think we don't speak about the same thing... or it's me that doesn't understand! (that's also possible )

Maybe you are looking for