Layout for multiple lnaguages with PLD

Hi all,
lets say I need layouts prepared for two languages, say French and English. So I have two layouts per document, one for each language. My question is how can I set it so when I print a document, the proper layout will be selected according to the language set in the partner master data ?
Thanks
Gilles Plante

Gordon,
in fact, you can set a template to only specified BPs where you would select BPs with a specific language. But then when you create new BPs, you have to do it again and again. Since a layout can be assigned a language, I thought that was to automate the process of picking the right layout.
Gilles Plante

Similar Messages

Single invoice for multiple orders with different divisions

Dear All,
while I am trying to do single invoice for muliple orders with different divisons invoice is gettting splitted..In copy control vbrk routine I tried with 003 and 007 etc..but result is same..what configuration need to be done for getting the single invoice
Thanks In advance
Regards
CNRNAIR

Hello
single invoice for multiple orders with "different divisions" invoice is getting split
FYI - Different Division means different Sales Area.
So, sales doc (whether sales order, Delivery & Billing) is applicable to EXACTLY one sales area.
Thus, combining docs with different sales area is practically impossible.
Provided, you are using common division.
Hope this assist you,
Thanks & REgards
JP

Is it possible to search for multiple folders with the same name and...

Is it possible to search for multiple folders with the same name and then select them all and change the permissions on just those folders .i.e. Search for the budget folders in all client folders and lock them down to just the project managers. Without having to go to each folder and apply the permissions.

user11919409 wrote:
Is it possible to create a Clone database with the same name of source db using RMAN ...
yes
>
DB version is 11.2.0.2
Is it possible to clone a 11.2.0.2 database to 11.2.0.3 home location directly on a new server . If it starts in a upgrade mode , it is ok ....yes
Handle:     user11919409
Status Level:     Newbie (10)
Registered:     Dec 7, 2009
Total Posts:     102
Total Questions:     28 (22 unresolved)
why do you waste time here when you rarely get any answers to your questions?

Create a CR for multiple processing with me as the current processor

Hi
How to create a change request for multiple processing with myself as the current processor.
I have created a change request for multiple processing and the ystem throws me the error that "There are no suitable change requests"
Display help shows the below
For the upload you need a change request that has the status Considered
and Approved or To Be Revised and ideally has a type that does
not have the property Object List Is Binding. If the
change request does have this property, all the entities that are uploaded must
already be assigned to this object list.
Please can someoen guide me on how to fix this.
I found few threads related to this but cudint understand on how to assign a status to CR
Thanks,
Sharma

Hi Prateek,
Please can anyone give any pointers on how to set the status of change request (for multiple processing):-
For assigning the statuses to the change request:-
Go to t code:- MDGIMG->General settings>Process Modeling>Change Request>Edit status of change request.
the path you mentioned is to create and edit the existing Change request statuses, what I am looking for is when I create a CR for Multi record processing and try to upload a file I get the error "There are no suitable change requests". and when I check the Status of the change request I created I see that the status is Changes to be executed (Set automatically).
how can i set myself as the processor.
tcode: MDGIMG->General settings>Process Modeling>Change Request>Create Change request type. Ucheck the single object checkbox and assign your userid for that CR step.
Single object is already Unchecked and I am using BRF+ so when I am the processor First approver is say X, I am not sure if we have any place where we can set ourselves as the user. Please let me know if I missed sumting
Thanks
Hi Shephalika,
Yes I am trying to upload a file and Single object is Unchecked in the Change request type.
Thanks,
Sharma

How to config a shared cache for multiple environments with C API

How to config a shared cache for multiple environments with C API? Just like Java edition. Chapter 2. Database Environments
I want to open large number of databases, at least 10,000. But as the counts of databases opened increase, the db->open operation become very slow. It almost cost 2 hours to 10,000 databases.
So I try to distribute these databases to multiple environments ( for example, 5 envs ). And in order to improve the efficient of memory use, I want to share cache between envs.

Hi,
It is not clear what you meaning about multiple environments. Do you mean these environments are in different directories or in the same directory ? If you mean environments in different dirs share the same cache, it is interesting why you need that.
If you do not use DB_PRIVATE to open the environment, the created cache will be on disk, in the environment directory, so it can be shared by multiple processes and multiple threads. Currently, the cache file is in the environment directory, and we do not support specifying a separate directory for cache only.
Regards,
Oracle Berkeley DB.

Layout for multiple column

Dear all,
I have a layout setting that is supposed to have multiple columns. The first columns I have a fixed width in pixel (for example 120px), and the rest of the columns I want to set it in %. So, if the user resize its browser, the first column will stay 20px, while the rest will resize accordingly.
What is the best way of doing this in JSC?
thank you in advance

1. In first, second, and third rows, I have a label
and a text field. I want to left justify the label,
and the textfield. So, using gridPanel with 2 columns
will do the job.
2. In the fourth, fifth, sixth row, I have 2 labels
and 2 fields.In this order?
I want to keep the left justify setting
for the first label and textfield. If can't use the
grid panel because the layout for each labels are not
left justified with the same component in the first
and second rows. Beside the width of each labels and
textFields are not the same.That's why I'am not using the label attribute of TextField but separate Label components.
Create a Grid Panel with 4 columns and drop into
label1, textfield1, dummylabel11, dummylabel12
label2, textfield2, dummylabel21, dummylabel22
label3, textfield3, dummylabel31, dummylabel32
label4, textfield4, label5, textfield5
label6, textfield6, label7, textfield7
label8, textfield8, label9, textfield9
Create CSS classes for example as follows:
*.gridlabel {...}
*.griddata {...}
Set the columnClasses attribute of the GridPanel to "gridlabel, griddata, gridlabel, griddata".
To arrange more than one components in one cell of the GridPanel wrap them in a LayoutPanel without attributes.

Single layout for multiple printers

Hi All,
My requirement is that I need to create a single SAPScript driver and layout program which should work for multiple printers. I know that a SAPScript layout is printer-dependent. So is there any way through which I can make a single layout to work across multiple printers ?
Thanks

Yes, Disha.
If your printers have drivers who you can select in SAP, you can use all them to print the same form.
Print-codes are special instructions you use in SAPscript to workaround the interface and do some special things with the printer.
I'm far from my SAP now, and I cannot tell you exactly how to find them, sorry.
With print-codes you can change the scape of the printing while the work is in the printer, for example.
The bad side is that the print-codes are printer/driver dependant. If you change your driver or your printer, these forms where you are using print-codes could be broken.
(excuses for my english)
I wish you will be happier and have less work knowing that
Good luck,
Vicenç

BO xi 3.1 u2013 schedule a template for multiple reports with different column

Hi,
I need to migrate the existing reports from SQL Server Reporting Services to BO, and the column order in the report is very important to the clients since clients have existing code to ingest these reports into their database. Now I want to schedule a single template with different parameters for all reports in BO, or create a single template with lot of parameters for all reports. My question is how I might use one template to create multiple reports with different column orders in the reports?
For example, client A has the following column order in their report: firstName, LastName, DateBirth, SSN. Client B has the following column order in their report: SSN, DateBirth, LastName, FirstName. Can I use one template to create these multiple reports?
Thanks!

Hi,
The only approach I can think of is to create a template report which uses variables
For each column you would need to variable
v_columnAName and v_columnAValue
v_columnAName would have a if statement in it
=if([client]="clientA" or [client]="clientC";NameOf([firstName]);if([client]="clientB";NameOf([SSN]);NameOf([lastName]));
v_columnA would have a if statement in it
=if([client]="clientA" or [client]="clientC";[firstName];if([client]="clientB";[SSN],[lastName]));
This would only work when you had a small set of clients.
This might be more managable if it was done in the universe
Regards
Alan

Single ERS Invoice for multiple POs with different GS and same IP

Dear All,
I have a Requirement as per the below scenario:
We need to have single invoice created using ERS (MRRL) functionality in the below scenario:
Two POs created with different Partner function GS (goods supplier) and same IP (Invoice party partner function).
Ex:
GS IP PO GR ERS
vendor1 10001 4500001 500001 Yes ( GR-IV-Yes, GR done- Yes, same payment terms - 001)
vendor2 10001 4500002 500002 Yes ( GR-IV-Yes, GR done- Yes, same payment terms - 001)
When I run ERS for last 1 week (GR) and select the option (Doc selection – per IP or other criteria like GRs posted in last one week) , system should create 1 invoice document. Standard SAP posts 2 documents for each GS.
I have tried using 2 user exits for MRRL, but none of them work for this functionality.
Thanks,

Hi,
Go for MIRO without MRRL.
Instead ERS, you can post single Invoice(MIRO) for multiple POs for one vendor.
OR
Check with Technical consultant and go for development to have single ERS output for multiple ERS invoice documents for single vendor.
Regards,
Biju K

How to search for multiple values with Bex Prompts

Hi,
I would like to know if it is possible to search for multiple values at the same time with Bex Prompts instead of searching one value at a time (please see the screen shot below). I searched the forum couldn't find any relevant answers. please let me know how to achieve?
Thanks,
Charvi.

Hi Charvi,
You can use wild card search to ensure you get multiple similar values listed as search output.use * for multiple characters and ? for single character.
For Example, Ravi * would result you all employees with first name as Ravi
You can use various search formats such as * Ravi * and * Ravi and Ra?? etc.
Thanks
Mallik

Vendor invoie for multiple POs with different payment terms

Hi,
We have a vendor which send a single invoice for multiple POs which have different payment terms. Now if we create a single invoice in MIRO, then only a payment term can be applied.
However user want to pay to the vendor corresponding to the PO terms.
Please let us know any way apart from creating multiple MIRO documents.
Regds,
Nand

Hi,
You can achieve so in standard SAP.
Go to OBY6 and activate the check box "Enable Amount Split" in your company code. Then in MIRO, a new tab will appear in the header as "Amount Split"
In this tab, you can split the vendor invoice in multiple lines with respective payment method and payment term.
I hope this will help you.
Regards,
Gaurav

Layout for A5 booklet with book fold?

I need to find a layout for an A5 booklet, printed on A4 pages with a book fold, but I can't find anything. Can anyone help?

Try the Photo Card Horizontal.

Design a single template for multiple reports with different column order

Hi,
I need to migrate the existing reports from SQL Server Reporting Services to Crystal Report 2008, and the column order in the report is very important to the clients since clients have existing code to ingest these reports into their database. Now I want to create a single template with lot of parameters for all reports. My question is how I might use one template to create multiple reports with different column orders in the reports?
For example, client A has the following column order in their report: firstName, LastName, DateBirth, SSN. Client B has the following column order in their report: SSN, DateBirth, LastName, FirstName. Can I use one template to create these multiple reports?
Thanks in advance.

-As I mentioned you can find Template Field object in Insert menu of crystal report Designer 2008.
As soon as you select Template Field object you will be able to see a box beside ur mouse cursor. Drag and drop this box at required place. Now when you place this object in report you will get some thing like this "<TemplateField1>" listed under Formula Fields tree. Double click "<TemplateField1>" formula to add your conditions.
-I have not tested it for large amount of Customers. However as the number of customer increases the number of conditions will get increased.
For the customer that want the same ordering of columns you can put those customers under one condition.
    for Example...
          if(?Client in ['clientA','clientA']) then
                    <TableName>.<Field>......
-What do you mean be 40 columns? Do you mean 40 fields or you want to show 40 columns in report? Please elaborate.
Regards,
Amrita
Edited by: Amrita Singh on May 21, 2009 7:54 AM

How to install applications for multiple iPads with one ID?

Hey guys,
I have to prepare many iPads for work, and I've found the process to be very redundant. In order to ensure that the applications are tied to the ID of the final client, I have to first create an account under my email, download all the applications and then change the email to the client's. Now when I have to prepare another device, I have to delete the applications in iTunes and re-download them with a new account to make sure they are tied to the next ID. Is there a way to download and sync all the applications under one ID, and not have issue with updates in the future? Keep in mind I'm only installing free applications.

I was referring in particular to the logs that are created by Workshop
itself (in the workshop directory). It creates workshop.log and netui.log.
Raj Alagumalai wrote:
Steven,
which workshop log file are you referring to ?
the workshop log files are usually saved to the domain directory.
If the developers are each going to start their own server instances then
there should be no issues.
The best option for you is to create multiple domains for each developer.
They will share the same workshop installation, but they will each have
their own instances.
Thanks
Raj Alagumalai
WebLogic Workshop Support
"Steven Ostrowski" <[email protected]> wrote in message
news:[email protected]..
Hello,
What is the best way to install the WL 8.1 Platform for multiple
developers on a single UNIX machine? These developers may start
concurrent instances.
The problems I see are that the log files generated by Workshop would
be shared among concurrent users, permissions would need to be set so
that the user that is running the instance that creates the log files
will need to create the file with permissions that everyone can use. Are
there any other issues to doing this?
I could not find the information on this in the documentation.
Thanks

MRBR for multiple invoice with 1 GR

Hello
A question came up on how MRBR does it matching and clearing.
If we have multiple IR and one GR for the same line item does MRBR match on a FIFO basis?
Example: line 10 100 QTY    to be received at various time.
We receive invoice 1   6/1, invoice 2 on 6/15 for the same amount and Qty. No GR has been performed yet.
GR occurs on   6/17 which invoice would MRBR clear for payment Invoice 1 the oldest or Invoice 2?
*I tested and MRBR doesnot release any invoice automatically for multiple IR for 1 GR. User needs to release invoices manually.
What config needs to be done -
(We do IR before GR).
If we have multiple IRs or GRs then MRBR links and release automatically invoices based on FIFO basis.
Thanks.

****Hi Raf,****
****Thanks for the answer but it didn' work.****
****I tested PO with quantity 10 @ 100****
****Invoice receipt 6 @ 100****
****Good Receipt 5 @ 100****
****MRBR didnot release Invoice and it make sense as we paid more than receive.****
****I am still looking for answer to if we have multiple invoice to 1 GR why MRBR is not releasing invoices automatically.****
****E.G.****
****PO for 10 @ 100****
****IR for 6 @100****
****IR for 4 @100****
****GR for 6@ 100****
****When we run MRBR system doesnot release either of the invoices automatically. The invoices goies into quantity block.****
****Any help will be appreciated and points will be assigned.****
****Thanks.****
Edited by: Monica Bajaj on Jul 1, 2011 1:43 AM
Edited by: Monica Bajaj on Jul 1, 2011 1:44 AM

Layout for multiple lnaguages with PLD

Similar Messages

Maybe you are looking for